From: Eugene Shalygin <eugene.shalygin@gmail.com>
To: eugene.shalygin@gmail.com
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>,
Denis Pauk <pauk.denis@gmail.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] hwmon: (asus-ec-sensors) read sensors as signed ints
Date: Fri, 4 Feb 2022 17:30:45 +0100 [thread overview]
Message-ID: <20220204163045.576903-1-eugene.shalygin@gmail.com> (raw)
Temperature sensor readings are signed, which is hinted by their blank
value (oxd8, 216 as unsigned and -40 as signed). T_Sensor, Crosshair
VIII Hero, and a freezer were used to confirm that.
Here we read fan sensors as signed too, because with their typical
values and 2-byte width, I can't tell a difference between signed and
unsigned, as I don't have a high speed chipset fan.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
---
drivers/hwmon/asus-ec-sensors.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index 05244209c0c6..8a04c76527a4 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -221,7 +221,7 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
struct ec_sensor {
unsigned int info_index;
- u32 cached_value;
+ s32 cached_value;
};
struct ec_sensors_data {
@@ -408,15 +408,15 @@ static int asus_ec_block_read(const struct device *dev,
return status;
}
-static inline u32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
+static inline s32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
{
switch (si->addr.components.size) {
case 1:
- return *data;
+ return (s8)*data;
case 2:
- return get_unaligned_be16(data);
+ return (s16)get_unaligned_be16(data);
case 4:
- return get_unaligned_be32(data);
+ return (s32)get_unaligned_be32(data);
default:
return 0;
}
@@ -462,7 +462,7 @@ static int update_ec_sensors(const struct device *dev,
return status;
}
-static int scale_sensor_value(u32 value, int data_type)
+static long scale_sensor_value(s32 value, int data_type)
{
switch (data_type) {
case hwmon_curr:
@@ -476,7 +476,7 @@ static int scale_sensor_value(u32 value, int data_type)
static int get_cached_value_or_update(const struct device *dev,
int sensor_index,
- struct ec_sensors_data *state, u32 *value)
+ struct ec_sensors_data *state, s32 *value)
{
if (time_after(jiffies, state->last_updated + HZ)) {
if (update_ec_sensors(dev, state)) {
@@ -499,7 +499,7 @@ static int asus_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
int ret;
- u32 value = 0;
+ s32 value = 0;
struct ec_sensors_data *state = dev_get_drvdata(dev);
int sidx = find_ec_sensor_index(state, type, channel);
--
2.35.1
next reply other threads:[~2022-02-04 16:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 16:30 Eugene Shalygin [this message]
2022-02-05 18:01 ` [PATCH] hwmon: (asus-ec-sensors) read sensors as signed ints Guenter Roeck
2022-02-05 18:10 ` Eugene Shalygin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204163045.576903-1-eugene.shalygin@gmail.com \
--to=eugene.shalygin@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=oleksandr@natalenko.name \
--cc=pauk.denis@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox