public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Eugene Shalygin <eugene.shalygin@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>,
	Denis Pauk <pauk.denis@gmail.com>,
	Jean Delvare <jdelvare@suse.com>,
	linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: (asus-ec-sensors) read sensors as signed ints
Date: Sat, 5 Feb 2022 10:01:20 -0800	[thread overview]
Message-ID: <20220205180120.GA3076528@roeck-us.net> (raw)
In-Reply-To: <20220204163045.576903-1-eugene.shalygin@gmail.com>

On Fri, Feb 04, 2022 at 05:30:45PM +0100, Eugene Shalygin wrote:
> Temperature sensor readings are signed, which is hinted by their blank
> value (oxd8, 216 as unsigned and -40 as signed). T_Sensor, Crosshair
> VIII Hero, and a freezer were used to confirm that.
> 
> Here we read fan sensors as signed too, because with their typical
> values and 2-byte width, I can't tell a difference between signed and
> unsigned, as I don't have a high speed chipset fan.
> 
Hmm, I hope we won't get a situation where an unsigned is reported
and needed, but I guess we can deal with that if/when it happens.

> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/asus-ec-sensors.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
> index 05244209c0c6..8a04c76527a4 100644
> --- a/drivers/hwmon/asus-ec-sensors.c
> +++ b/drivers/hwmon/asus-ec-sensors.c
> @@ -221,7 +221,7 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
>  
>  struct ec_sensor {
>  	unsigned int info_index;
> -	u32 cached_value;
> +	s32 cached_value;
>  };
>  
>  struct ec_sensors_data {
> @@ -408,15 +408,15 @@ static int asus_ec_block_read(const struct device *dev,
>  	return status;
>  }
>  
> -static inline u32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
> +static inline s32 get_sensor_value(const struct ec_sensor_info *si, u8 *data)
>  {
>  	switch (si->addr.components.size) {
>  	case 1:
> -		return *data;
> +		return (s8)*data;
>  	case 2:
> -		return get_unaligned_be16(data);
> +		return (s16)get_unaligned_be16(data);
>  	case 4:
> -		return get_unaligned_be32(data);
> +		return (s32)get_unaligned_be32(data);
>  	default:
>  		return 0;
>  	}
> @@ -462,7 +462,7 @@ static int update_ec_sensors(const struct device *dev,
>  	return status;
>  }
>  
> -static int scale_sensor_value(u32 value, int data_type)
> +static long scale_sensor_value(s32 value, int data_type)
>  {
>  	switch (data_type) {
>  	case hwmon_curr:
> @@ -476,7 +476,7 @@ static int scale_sensor_value(u32 value, int data_type)
>  
>  static int get_cached_value_or_update(const struct device *dev,
>  				      int sensor_index,
> -				      struct ec_sensors_data *state, u32 *value)
> +				      struct ec_sensors_data *state, s32 *value)
>  {
>  	if (time_after(jiffies, state->last_updated + HZ)) {
>  		if (update_ec_sensors(dev, state)) {
> @@ -499,7 +499,7 @@ static int asus_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>  			      u32 attr, int channel, long *val)
>  {
>  	int ret;
> -	u32 value = 0;
> +	s32 value = 0;
>  
>  	struct ec_sensors_data *state = dev_get_drvdata(dev);
>  	int sidx = find_ec_sensor_index(state, type, channel);

  reply	other threads:[~2022-02-05 18:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04 16:30 [PATCH] hwmon: (asus-ec-sensors) read sensors as signed ints Eugene Shalygin
2022-02-05 18:01 ` Guenter Roeck [this message]
2022-02-05 18:10   ` Eugene Shalygin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220205180120.GA3076528@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=eugene.shalygin@gmail.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oleksandr@natalenko.name \
    --cc=pauk.denis@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox