[PATCH AUTOSEL 5.16 01/42] ASoC: mediatek: fix unmet dependency on GPIOLIB for SND_SOC_DMIC

[PATCH AUTOSEL 5.16 01/42] ASoC: mediatek: fix unmet dependency on GPIOLIB for SND_SOC_DMIC

[Sasha Levin]

From: Julian Braha <julianbraha@gmail.com>

[ Upstream commit 579b2c8f72d974f27d85bbd53846f34675ee3b01 ]

When SND_SOC_MT8195_MT6359_RT1011_RT5682 is selected,
and GPIOLIB is not selected,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for SND_SOC_DMIC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8195_MT6359_RT1011_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8195 [=y] && MTK_PMIC_WRAP [=y]

This is because SND_SOC_MT8195_MT6359_RT1011_RT5682
selects SND_SOC_DMIC without selecting or depending on
GPIOLIB, depsite SND_SOC_DMIC depending on GPIOLIB.

This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20220117050324.68371-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/mediatek/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig
index 3b1ddea26a9ef..76f191ec7bf84 100644
--- a/sound/soc/mediatek/Kconfig
+++ b/sound/soc/mediatek/Kconfig
@@ -215,7 +215,7 @@ config SND_SOC_MT8195_MT6359_RT1019_RT5682
 
 config SND_SOC_MT8195_MT6359_RT1011_RT5682
 	tristate "ASoC Audio driver for MT8195 with MT6359 RT1011 RT5682 codec"
-	depends on I2C
+	depends on I2C && GPIOLIB
 	depends on SND_SOC_MT8195 && MTK_PMIC_WRAP
 	select SND_SOC_MT6359
 	select SND_SOC_RT1011
-- 
2.34.1

[PATCH AUTOSEL 5.16 02/42] platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1

[Sasha Levin]

From: Yuka Kawajiri <yukx00@gmail.com>

[ Upstream commit 512eb73cfd1208898cf10cb06094e0ee0bb53b58 ]

Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1.

Signed-off-by: Yuka Kawajiri <yukx00@gmail.com>
Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 17dd54d4b783c..e318b40949679 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -773,6 +773,21 @@ static const struct ts_dmi_data predia_basic_data = {
 	.properties	= predia_basic_props,
 };
 
+static const struct property_entry rwc_nanote_p8_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 46),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-p8.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data rwc_nanote_p8_data = {
+	.acpi_name = "MSSL1680:00",
+	.properties = rwc_nanote_p8_props,
+};
+
 static const struct property_entry schneider_sct101ctm_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
@@ -1406,6 +1421,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
 		},
 	},
+	{
+		/* RWC NANOTE P8 */
+		.driver_data = (void *)&rwc_nanote_p8_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AY07J"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "0001")
+		},
+	},
 	{
 		/* Schneider SCT101CTM */
 		.driver_data = (void *)&schneider_sct101ctm_data,
-- 
2.34.1

[PATCH AUTOSEL 5.16 03/42] platform/x86: ISST: Fix possible circular locking dependency detected

[Sasha Levin]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ]

As reported:

[  256.104522] ======================================================
[  256.113783] WARNING: possible circular locking dependency detected
[  256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[  256.125362] ------------------------------------------------------
[  256.131673] intel-speed-sel/844 is trying to acquire lock:
[  256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[  256.147171]
[  256.147171] but task is already holding lock:
[  256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[  256.160407]
[  256.160407] which lock already depends on the new lock.
[  256.160407]
[  256.168712]
[  256.168712] the existing dependency chain (in reverse order) is:
[  256.176327]
[  256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[  256.181946]        lock_acquire+0x1e6/0x330
[  256.186265]        __mutex_lock+0x9b/0x9b0
[  256.190497]        mutex_lock_nested+0x1b/0x20
[  256.195075]        misc_register+0x32/0x1a0
[  256.199390]        isst_if_cdev_register+0x65/0x180 [isst_if_common]
[  256.205878]        isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[  256.241976]
[  256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[  256.248552]        validate_chain+0xbc6/0x1750
[  256.253131]        __lock_acquire+0x88c/0xc10
[  256.257618]        lock_acquire+0x1e6/0x330
[  256.261933]        __mutex_lock+0x9b/0x9b0
[  256.266165]        mutex_lock_nested+0x1b/0x20
[  256.270739]        isst_if_open+0x18/0x90 [isst_if_common]
[  256.276356]        misc_open+0x100/0x170
[  256.280409]        chrdev_open+0xa5/0x1e0
...

The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.

Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.

We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.

- The other lock protects registry, load and unload of HW drivers.

Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.

Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register

Reported-and-tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../intel/speed_select_if/isst_if_common.c    | 97 ++++++++++++-------
 1 file changed, 63 insertions(+), 34 deletions(-)

diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
index c9a85eb2e8600..e8424e70d81d2 100644
--- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
@@ -596,7 +596,10 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static DEFINE_MUTEX(punit_misc_dev_lock);
+/* Lock to prevent module registration when already opened by user space */
+static DEFINE_MUTEX(punit_misc_dev_open_lock);
+/* Lock to allow one share misc device for all ISST interace */
+static DEFINE_MUTEX(punit_misc_dev_reg_lock);
 static int misc_usage_count;
 static int misc_device_ret;
 static int misc_device_open;
@@ -606,7 +609,7 @@ static int isst_if_open(struct inode *inode, struct file *file)
 	int i, ret = 0;
 
 	/* Fail open, if a module is going away */
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
 	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
 		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
 
@@ -628,7 +631,7 @@ static int isst_if_open(struct inode *inode, struct file *file)
 	} else {
 		misc_device_open++;
 	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
 	return ret;
 }
@@ -637,7 +640,7 @@ static int isst_if_relase(struct inode *inode, struct file *f)
 {
 	int i;
 
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
 	misc_device_open--;
 	for (i = 0; i < ISST_IF_DEV_MAX; ++i) {
 		struct isst_if_cmd_cb *cb = &punit_callbacks[i];
@@ -645,7 +648,7 @@ static int isst_if_relase(struct inode *inode, struct file *f)
 		if (cb->registered)
 			module_put(cb->owner);
 	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
 	return 0;
 }
@@ -662,6 +665,43 @@ static struct miscdevice isst_if_char_driver = {
 	.fops		= &isst_if_char_driver_ops,
 };
 
+static int isst_misc_reg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_device_ret)
+		goto unlock_exit;
+
+	if (!misc_usage_count) {
+		misc_device_ret = isst_if_cpu_info_init();
+		if (misc_device_ret)
+			goto unlock_exit;
+
+		misc_device_ret = misc_register(&isst_if_char_driver);
+		if (misc_device_ret) {
+			isst_if_cpu_info_exit();
+			goto unlock_exit;
+		}
+	}
+	misc_usage_count++;
+
+unlock_exit:
+	mutex_unlock(&punit_misc_dev_reg_lock);
+
+	return misc_device_ret;
+}
+
+static void isst_misc_unreg(void)
+{
+	mutex_lock(&punit_misc_dev_reg_lock);
+	if (misc_usage_count)
+		misc_usage_count--;
+	if (!misc_usage_count && !misc_device_ret) {
+		misc_deregister(&isst_if_char_driver);
+		isst_if_cpu_info_exit();
+	}
+	mutex_unlock(&punit_misc_dev_reg_lock);
+}
+
 /**
  * isst_if_cdev_register() - Register callback for IOCTL
  * @device_type: The device type this callback handling.
@@ -679,38 +719,31 @@ static struct miscdevice isst_if_char_driver = {
  */
 int isst_if_cdev_register(int device_type, struct isst_if_cmd_cb *cb)
 {
-	if (misc_device_ret)
-		return misc_device_ret;
+	int ret;
 
 	if (device_type >= ISST_IF_DEV_MAX)
 		return -EINVAL;
 
-	mutex_lock(&punit_misc_dev_lock);
+	mutex_lock(&punit_misc_dev_open_lock);
+	/* Device is already open, we don't want to add new callbacks */
 	if (misc_device_open) {
-		mutex_unlock(&punit_misc_dev_lock);
+		mutex_unlock(&punit_misc_dev_open_lock);
 		return -EAGAIN;
 	}
-	if (!misc_usage_count) {
-		int ret;
-
-		misc_device_ret = misc_register(&isst_if_char_driver);
-		if (misc_device_ret)
-			goto unlock_exit;
-
-		ret = isst_if_cpu_info_init();
-		if (ret) {
-			misc_deregister(&isst_if_char_driver);
-			misc_device_ret = ret;
-			goto unlock_exit;
-		}
-	}
 	memcpy(&punit_callbacks[device_type], cb, sizeof(*cb));
 	punit_callbacks[device_type].registered = 1;
-	misc_usage_count++;
-unlock_exit:
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 
-	return misc_device_ret;
+	ret = isst_misc_reg();
+	if (ret) {
+		/*
+		 * No need of mutex as the misc device register failed
+		 * as no one can open device yet. Hence no contention.
+		 */
+		punit_callbacks[device_type].registered = 0;
+		return ret;
+	}
+	return 0;
 }
 EXPORT_SYMBOL_GPL(isst_if_cdev_register);
 
@@ -725,16 +758,12 @@ EXPORT_SYMBOL_GPL(isst_if_cdev_register);
  */
 void isst_if_cdev_unregister(int device_type)
 {
-	mutex_lock(&punit_misc_dev_lock);
-	misc_usage_count--;
+	isst_misc_unreg();
+	mutex_lock(&punit_misc_dev_open_lock);
 	punit_callbacks[device_type].registered = 0;
 	if (device_type == ISST_IF_DEV_MBOX)
 		isst_delete_hash();
-	if (!misc_usage_count && !misc_device_ret) {
-		misc_deregister(&isst_if_char_driver);
-		isst_if_cpu_info_exit();
-	}
-	mutex_unlock(&punit_misc_dev_lock);
+	mutex_unlock(&punit_misc_dev_open_lock);
 }
 EXPORT_SYMBOL_GPL(isst_if_cdev_unregister);
 
-- 
2.34.1

[PATCH AUTOSEL 5.16 04/42] platform/x86: amd-pmc: Correct usage of SMU version

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit b8fb0d9b47660ddb8a8256412784aad7cee9f21a ]

Yellow carp has been outputting versions like `1093.24.0`, but this
is supposed to be 69.24.0. That is the MSB is being interpreted
incorrectly.

The MSB is not part of the major version, but has generally been
treated that way thus far.  It's actually the program, and used to
distinguish between two programs from a similar family but different
codebase.

Link: https://patchwork.freedesktop.org/patch/469993/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/amd-pmc.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index 230593ae5d6de..8c74733530e3d 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -117,9 +117,10 @@ struct amd_pmc_dev {
 	u32 cpu_id;
 	u32 active_ips;
 /* SMU version information */
-	u16 major;
-	u16 minor;
-	u16 rev;
+	u8 smu_program;
+	u8 major;
+	u8 minor;
+	u8 rev;
 	struct device *dev;
 	struct mutex lock; /* generic mutex lock */
 #if IS_ENABLED(CONFIG_DEBUG_FS)
@@ -166,11 +167,13 @@ static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev)
 	if (rc)
 		return rc;
 
-	dev->major = (val >> 16) & GENMASK(15, 0);
+	dev->smu_program = (val >> 24) & GENMASK(7, 0);
+	dev->major = (val >> 16) & GENMASK(7, 0);
 	dev->minor = (val >> 8) & GENMASK(7, 0);
 	dev->rev = (val >> 0) & GENMASK(7, 0);
 
-	dev_dbg(dev->dev, "SMU version is %u.%u.%u\n", dev->major, dev->minor, dev->rev);
+	dev_dbg(dev->dev, "SMU program %u version is %u.%u.%u\n",
+		dev->smu_program, dev->major, dev->minor, dev->rev);
 
 	return 0;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.16 05/42] kunit: tool: Import missing importlib.abc

[Sasha Levin]

From: Michał Winiarski <michal.winiarski@intel.com>

[ Upstream commit 235528072f28b3b0a1446279b7eaddda36dbf743 ]

Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")

It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?

Add the missing import.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/kunit/kunit_kernel.py | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
index 66095568bf327..fae843bf2f0eb 100644
--- a/tools/testing/kunit/kunit_kernel.py
+++ b/tools/testing/kunit/kunit_kernel.py
@@ -6,6 +6,7 @@
 # Author: Felix Guo <felixguoxiuping@gmail.com>
 # Author: Brendan Higgins <brendanhiggins@google.com>
 
+import importlib.abc
 import importlib.util
 import logging
 import subprocess
-- 
2.34.1

[PATCH AUTOSEL 5.16 06/42] selftests: rtc: Increase test timeout so that all tests run

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]

The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.

However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.

In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.

Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:

	./run_kselftest.sh -c rtc

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/rtc/settings | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings
index ba4d85f74cd6b..a953c96aa16e1 100644
--- a/tools/testing/selftests/rtc/settings
+++ b/tools/testing/selftests/rtc/settings
@@ -1 +1 @@
-timeout=90
+timeout=180
-- 
2.34.1

[PATCH AUTOSEL 5.16 07/42] kselftest: signal all child processes

[Sasha Levin]

From: Li Zhijian <lizhijian@cn.fujitsu.com>

[ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ]

We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.

Here we group all its child processes so that kill() can signal all of
them in timeout.

Fixed change log: Shuah Khan <skhan@linuxfoundation.org>

Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest_harness.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 79a182cfa43ad..78e59620d28de 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -875,7 +875,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext)
 	}
 
 	t->timed_out = true;
-	kill(t->pid, SIGKILL);
+	// signal process group
+	kill(-(t->pid), SIGKILL);
 }
 
 void __wait_for_test(struct __test_metadata *t)
@@ -985,6 +986,7 @@ void __run_test(struct __fixture_metadata *f,
 		ksft_print_msg("ERROR SPAWNING TEST CHILD\n");
 		t->passed = 0;
 	} else if (t->pid == 0) {
+		setpgrp();
 		t->fn(t, variant);
 		if (t->skip)
 			_exit(255);
-- 
2.34.1

[PATCH AUTOSEL 5.16 08/42] selftests: netfilter: reduce zone stress test running time

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit c858620d2ae3489409af593f005a48a8a324da3d ]

This selftests needs almost 3 minutes to complete, reduce the
insertes zones to 1000.  Test now completes in about 20 seconds.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_zones_many.sh | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh
index 04633119b29a0..5a8db0b48928f 100755
--- a/tools/testing/selftests/netfilter/nft_zones_many.sh
+++ b/tools/testing/selftests/netfilter/nft_zones_many.sh
@@ -9,7 +9,7 @@ ns="ns-$sfx"
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 
-zones=20000
+zones=2000
 have_ct_tool=0
 ret=0
 
@@ -75,10 +75,10 @@ EOF
 
 	while [ $i -lt $max_zones ]; do
 		local start=$(date +%s%3N)
-		i=$((i + 10000))
+		i=$((i + 1000))
 		j=$((j + 1))
 		# nft rule in output places each packet in a different zone.
-		dd if=/dev/zero of=/dev/stdout bs=8k count=10000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345
+		dd if=/dev/zero of=/dev/stdout bs=8k count=1000 2>/dev/null | ip netns exec "$ns" socat STDIN UDP:127.0.0.1:12345,sourceport=12345
 		if [ $? -ne 0 ] ;then
 			ret=1
 			break
@@ -86,7 +86,7 @@ EOF
 
 		stop=$(date +%s%3N)
 		local duration=$((stop-start))
-		echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)"
+		echo "PASS: added 1000 entries in $duration ms (now $i total, loop $j)"
 	done
 
 	if [ $have_ct_tool -eq 1 ]; then
@@ -128,11 +128,11 @@ test_conntrack_tool() {
 			break
 		fi
 
-		if [ $((i%10000)) -eq 0 ];then
+		if [ $((i%1000)) -eq 0 ];then
 			stop=$(date +%s%3N)
 
 			local duration=$((stop-start))
-			echo "PASS: added 10000 entries in $duration ms (now $i total)"
+			echo "PASS: added 1000 entries in $duration ms (now $i total)"
 			start=$stop
 		fi
 	done
-- 
2.34.1

[PATCH AUTOSEL 5.16 09/42] selftests: netfilter: check stateless nat udp checksum fixup

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa ]

Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.

On kernels without
commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:

cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root    0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)

On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 152 +++++++++++++++++++
 1 file changed, 152 insertions(+)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index d88867d2fed75..eb8543b9a5c40 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -898,6 +898,144 @@ EOF
 	ip netns exec "$ns0" nft delete table $family nat
 }
 
+test_stateless_nat_ip()
+{
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules"
+		return 1
+	fi
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table ip stateless {
+	map xlate_in {
+		typeof meta iifname . ip saddr . ip daddr : ip daddr
+		elements = {
+			"veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2,
+		}
+	}
+	map xlate_out {
+		typeof meta iifname . ip saddr . ip daddr : ip daddr
+		elements = {
+			"veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99
+		}
+	}
+
+	chain prerouting {
+		type filter hook prerouting priority -400; policy accept;
+		ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in
+		ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add ip statless rules"
+		return $ksft_skip
+	fi
+
+	reset_counters
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from .2.2, due to stateless rewrite.
+	expect="packets 1 bytes 84"
+	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns1" ns0insl "$expect" "test_stateless 1"
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+	socat -h > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run stateless nat frag test without socat tool"
+		if [ $lret -eq 0 ]; then
+			return $ksft_skip
+		fi
+
+		ip netns exec "$ns0" nft delete table ip stateless
+		return $lret
+	fi
+
+	local tmpfile=$(mktemp)
+	dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null
+
+	local outfile=$(mktemp)
+	ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null &
+	sc_r=$!
+
+	sleep 1
+	# re-do with large ping -> ip fragmentation
+	ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2
+		lret=1
+	fi
+
+	wait
+
+	cmp "$tmpfile" "$outfile"
+	if [ $? -ne 0 ]; then
+		ls -l "$tmpfile" "$outfile"
+		echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2
+		lret=1
+	fi
+
+	rm -f "$tmpfile" "$outfile"
+
+	# ns1 should have seen packets from 2.2, due to stateless rewrite.
+	expect="packets 3 bytes 4164"
+	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns1" ns0insl "$expect" "test_stateless 5"
+		lret=1
+	fi
+
+	ip netns exec "$ns0" nft delete table ip stateless
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete table ip stateless" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP statless for $ns2"
+
+	return $lret
+}
+
 # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
 for i in 0 1 2; do
 ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
@@ -964,6 +1102,19 @@ table inet filter {
 EOF
 done
 
+# special case for stateless nat check, counter needs to
+# be done before (input) ip defragmentation
+ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF
+table inet filter {
+	counter ns0insl {}
+
+	chain pre {
+		type filter hook prerouting priority -400; policy accept;
+		ip saddr 10.0.2.2 counter name "ns0insl"
+	}
+}
+EOF
+
 sleep 3
 # test basic connectivity
 for i in 1 2; do
@@ -1018,6 +1169,7 @@ $test_inet_nat && test_redirect inet
 $test_inet_nat && test_redirect6 inet
 
 test_port_shadowing
+test_stateless_nat_ip
 
 if [ $ret -ne 0 ];then
 	echo -n "FAIL: "
-- 
2.34.1

[PATCH AUTOSEL 5.16 10/42] net: ieee802154: at86rf230: Stop leaking skb's

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ]

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.

Free the skb structure upon error before returning when appropriate.

As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.

There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.

Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/at86rf230.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 7d67f41387f55..4f5ef8a9a9a87 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -100,6 +100,7 @@ struct at86rf230_local {
 	unsigned long cal_timeout;
 	bool is_tx;
 	bool is_tx_from_off;
+	bool was_tx;
 	u8 tx_retry;
 	struct sk_buff *tx_skb;
 	struct at86rf230_state_change tx;
@@ -343,7 +344,11 @@ at86rf230_async_error_recover_complete(void *context)
 	if (ctx->free)
 		kfree(ctx);
 
-	ieee802154_wake_queue(lp->hw);
+	if (lp->was_tx) {
+		lp->was_tx = 0;
+		dev_kfree_skb_any(lp->tx_skb);
+		ieee802154_wake_queue(lp->hw);
+	}
 }
 
 static void
@@ -352,7 +357,11 @@ at86rf230_async_error_recover(void *context)
 	struct at86rf230_state_change *ctx = context;
 	struct at86rf230_local *lp = ctx->lp;
 
-	lp->is_tx = 0;
+	if (lp->is_tx) {
+		lp->was_tx = 1;
+		lp->is_tx = 0;
+	}
+
 	at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
 				     at86rf230_async_error_recover_complete);
 }
-- 
2.34.1

[PATCH AUTOSEL 5.16 11/42] selftests/zram: Skip max_comp_streams interface on newer kernel

[Sasha Levin]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index 6f872f266fd11..f47fc0f27e99e 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -11,6 +11,9 @@ dev_mounted=-1
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
 
 trap INT
 
@@ -25,6 +28,20 @@ check_prereqs()
 	fi
 }
 
+kernel_gte()
+{
+	major=${1%.*}
+	minor=${1#*.}
+
+	if [ $kernel_major -gt $major ]; then
+		return 0
+	elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+		return 0
+	fi
+
+	return 1
+}
+
 zram_cleanup()
 {
 	echo "zram cleanup"
@@ -86,6 +103,13 @@ zram_max_streams()
 {
 	echo "set max_comp_streams to zram device(s)"
 
+	kernel_gte 4.7
+	if [ $? -eq 0 ]; then
+		echo "The device attribute max_comp_streams was"\
+		               "deprecated in 4.7"
+		return 0
+	fi
+
 	local i=0
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
-- 
2.34.1

[PATCH AUTOSEL 5.16 12/42] selftests/zram01.sh: Fix compression ratio calculation

[Sasha Levin]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]

zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.

We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.

orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk

Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram01.sh | 30 +++++++-------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index 114863d9fb876..e9e9eb777e2c7 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -33,8 +33,6 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	local mem_free0=$(free -m | awk 'NR==2 {print $4}')
-
 	for i in $(seq 0 $(($dev_num - 1))); do
 		echo "fill zram$i..."
 		local b=0
@@ -45,29 +43,17 @@ zram_fill_fs()
 			b=$(($b + 1))
 		done
 		echo "zram$i can be filled with '$b' KB"
-	done
 
-	local mem_free1=$(free -m | awk 'NR==2 {print $4}')
-	local used_mem=$(($mem_free0 - $mem_free1))
+		local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"`
+		local v=$((100 * 1024 * $b / $mem_used_total))
+		if [ "$v" -lt 100 ]; then
+			 echo "FAIL compression ratio: 0.$v:1"
+			 ERR_CODE=-1
+			 return
+		fi
 
-	local total_size=0
-	for sm in $zram_sizes; do
-		local s=$(echo $sm | sed 's/M//')
-		total_size=$(($total_size + $s))
+		echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 	done
-
-	echo "zram used ${used_mem}M, zram disk sizes ${total_size}M"
-
-	local v=$((100 * $total_size / $used_mem))
-
-	if [ "$v" -lt 100 ]; then
-		echo "FAIL compression ratio: 0.$v:1"
-		ERR_CODE=-1
-		zram_cleanup
-		return
-	fi
-
-	echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 }
 
 check_prereqs
-- 
2.34.1

[PATCH AUTOSEL 5.16 13/42] selftests/zram: Adapt the situation that /dev/zram0 is being used

[Sasha Levin]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram.sh     |  15 +---
 tools/testing/selftests/zram/zram01.sh   |   3 +-
 tools/testing/selftests/zram/zram02.sh   |   1 -
 tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++----------
 4 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh
index 232e958ec4547..b0b91d9b0dc21 100755
--- a/tools/testing/selftests/zram/zram.sh
+++ b/tools/testing/selftests/zram/zram.sh
@@ -2,9 +2,6 @@
 # SPDX-License-Identifier: GPL-2.0
 TCID="zram.sh"
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
 . ./zram_lib.sh
 
 run_zram () {
@@ -18,14 +15,4 @@ echo ""
 
 check_prereqs
 
-# check zram module exists
-MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-if [ -f $MODULE_PATH ]; then
-	run_zram
-elif [ -b /dev/zram0 ]; then
-	run_zram
-else
-	echo "$TCID : No zram.ko module or /dev/zram0 device file not found"
-	echo "$TCID : CONFIG_ZRAM is not set"
-	exit $ksft_skip
-fi
+run_zram
diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index e9e9eb777e2c7..8f4affe34f3e4 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -33,7 +33,7 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "fill zram$i..."
 		local b=0
 		while [ true ]; do
@@ -67,7 +67,6 @@ zram_mount
 
 zram_fill_fs
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh
index e83b404807c09..2418b0c4ed136 100755
--- a/tools/testing/selftests/zram/zram02.sh
+++ b/tools/testing/selftests/zram/zram02.sh
@@ -36,7 +36,6 @@ zram_set_memlimit
 zram_makeswap
 zram_swapoff
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index f47fc0f27e99e..21ec1966de76c 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -5,10 +5,12 @@
 # Author: Alexey Kodanev <alexey.kodanev@oracle.com>
 # Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
 
-MODULE=0
 dev_makeswap=-1
 dev_mounted=-1
-
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 kernel_version=`uname -r | cut -d'.' -f1,2`
@@ -46,57 +48,72 @@ zram_cleanup()
 {
 	echo "zram cleanup"
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_makeswap); do
 		swapoff /dev/zram$i
 	done
 
-	for i in $(seq 0 $dev_mounted); do
+	for i in $(seq $dev_start $dev_mounted); do
 		umount /dev/zram$i
 	done
 
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo 1 > /sys/block/zram${i}/reset
 		rm -rf zram$i
 	done
 
-}
+	if [ $sys_control -eq 1 ]; then
+		for i in $(seq $dev_start $dev_end); do
+			echo $i > /sys/class/zram-control/hot_remove
+		done
+	fi
 
-zram_unload()
-{
-	if [ $MODULE -ne 0 ] ; then
-		echo "zram rmmod zram"
+	if [ $module_load -eq 1 ]; then
 		rmmod zram > /dev/null 2>&1
 	fi
 }
 
 zram_load()
 {
-	# check zram module exists
-	MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-	if [ -f $MODULE_PATH ]; then
-		MODULE=1
-		echo "create '$dev_num' zram device(s)"
-		modprobe zram num_devices=$dev_num
-		if [ $? -ne 0 ]; then
-			echo "failed to insert zram module"
-			exit 1
-		fi
-
-		dev_num_created=$(ls /dev/zram* | wc -w)
+	echo "create '$dev_num' zram device(s)"
+
+	# zram module loaded, new kernel
+	if [ -d "/sys/class/zram-control" ]; then
+		echo "zram modules already loaded, kernel supports" \
+			"zram-control interface"
+		dev_start=$(ls /dev/zram* | wc -w)
+		dev_end=$(($dev_start + $dev_num - 1))
+		sys_control=1
+
+		for i in $(seq $dev_start $dev_end); do
+			cat /sys/class/zram-control/hot_add > /dev/null
+		done
+
+		echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+			"successfully created"
+		return 0
+	fi
 
-		if [ "$dev_num_created" -ne "$dev_num" ]; then
-			echo "unexpected num of devices: $dev_num_created"
-			ERR_CODE=-1
+	# detect old kernel or built-in
+	modprobe zram num_devices=$dev_num
+	if [ ! -d "/sys/class/zram-control" ]; then
+		if grep -q '^zram' /proc/modules; then
+			rmmod zram > /dev/null 2>&1
+			if [ $? -ne 0 ]; then
+				echo "zram module is being used on old kernel" \
+					"without zram-control interface"
+				exit $ksft_skip
+			fi
 		else
-			echo "zram load module successful"
+			echo "test needs CONFIG_ZRAM=m on old kernel without" \
+				"zram-control interface"
+			exit $ksft_skip
 		fi
-	elif [ -b /dev/zram0 ]; then
-		echo "/dev/zram0 device file found: OK"
-	else
-		echo "ERROR: No zram.ko module or no /dev/zram0 device found"
-		echo "$TCID : CONFIG_ZRAM is not set"
-		exit 1
+		modprobe zram num_devices=$dev_num
 	fi
+
+	module_load=1
+	dev_end=$(($dev_num - 1))
+	echo "all zram devices (/dev/zram0~$dev_end) successfully created"
 }
 
 zram_max_streams()
@@ -110,7 +127,7 @@ zram_max_streams()
 		return 0
 	fi
 
-	local i=0
+	local i=$dev_start
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
 		echo $max_s > $sys_path || \
@@ -122,7 +139,7 @@ zram_max_streams()
 			echo "FAIL can't set max_streams '$max_s', get $max_stream"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$max_streams' ($i/$dev_num)"
+		echo "$sys_path = '$max_streams'"
 	done
 
 	echo "zram max streams: OK"
@@ -132,15 +149,16 @@ zram_compress_alg()
 {
 	echo "test that we can set compression algorithm"
 
-	local algs=$(cat /sys/block/zram0/comp_algorithm)
+	local i=$dev_start
+	local algs=$(cat /sys/block/zram${i}/comp_algorithm)
 	echo "supported algs: $algs"
-	local i=0
+
 	for alg in $zram_algs; do
 		local sys_path="/sys/block/zram${i}/comp_algorithm"
 		echo "$alg" >	$sys_path || \
 			echo "FAIL can't set '$alg' to $sys_path"
 		i=$(($i + 1))
-		echo "$sys_path = '$alg' ($i/$dev_num)"
+		echo "$sys_path = '$alg'"
 	done
 
 	echo "zram set compression algorithm: OK"
@@ -149,14 +167,14 @@ zram_compress_alg()
 zram_set_disksizes()
 {
 	echo "set disk size to zram device(s)"
-	local i=0
+	local i=$dev_start
 	for ds in $zram_sizes; do
 		local sys_path="/sys/block/zram${i}/disksize"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set disksizes: OK"
@@ -166,14 +184,14 @@ zram_set_memlimit()
 {
 	echo "set memory limit to zram device(s)"
 
-	local i=0
+	local i=$dev_start
 	for ds in $zram_mem_limits; do
 		local sys_path="/sys/block/zram${i}/mem_limit"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set memory limit: OK"
@@ -182,8 +200,8 @@ zram_set_memlimit()
 zram_makeswap()
 {
 	echo "make swap with zram device(s)"
-	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	local i=$dev_start
+	for i in $(seq $dev_start $dev_end); do
 		mkswap /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -206,7 +224,7 @@ zram_makeswap()
 zram_swapoff()
 {
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_end); do
 		swapoff /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -220,7 +238,7 @@ zram_swapoff()
 
 zram_makefs()
 {
-	local i=0
+	local i=$dev_start
 	for fs in $zram_filesystems; do
 		# if requested fs not supported default it to ext2
 		which mkfs.$fs > /dev/null 2>&1 || fs=ext2
@@ -239,7 +257,7 @@ zram_makefs()
 zram_mount()
 {
 	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "mount /dev/zram$i"
 		mkdir zram$i
 		mount /dev/zram$i zram$i > /dev/null || \
-- 
2.34.1

[PATCH AUTOSEL 5.16 14/42] selftests: openat2: Print also errno in failure messages

[Sasha Levin]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ]

In E_func() macro, on error, print also errno in order to aid debugging.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/helpers.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h
index a6ea27344db2d..ad5d0ba5b6ce9 100644
--- a/tools/testing/selftests/openat2/helpers.h
+++ b/tools/testing/selftests/openat2/helpers.h
@@ -62,11 +62,12 @@ bool needs_openat2(const struct open_how *how);
 					(similar to chroot(2)). */
 #endif /* RESOLVE_IN_ROOT */
 
-#define E_func(func, ...)						\
-	do {								\
-		if (func(__VA_ARGS__) < 0)				\
-			ksft_exit_fail_msg("%s:%d %s failed\n", \
-					   __FILE__, __LINE__, #func);\
+#define E_func(func, ...)						      \
+	do {								      \
+		errno = 0;						      \
+		if (func(__VA_ARGS__) < 0)				      \
+			ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n",    \
+					   __FILE__, __LINE__, #func, errno); \
 	} while (0)
 
 #define E_asprintf(...)		E_func(asprintf,	__VA_ARGS__)
-- 
2.34.1

[PATCH AUTOSEL 5.16 15/42] selftests: openat2: Add missing dependency in Makefile

[Sasha Levin]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ]

Add a dependency on header helpers.h to the main target; while at that add
to helpers.h also a missing include for bool types.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/Makefile  | 2 +-
 tools/testing/selftests/openat2/helpers.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile
index 4b93b1417b862..843ba56d8e49e 100644
--- a/tools/testing/selftests/openat2/Makefile
+++ b/tools/testing/selftests/openat2/Makefile
@@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test
 
 include ../lib.mk
 
-$(TEST_GEN_PROGS): helpers.c
+$(TEST_GEN_PROGS): helpers.c helpers.h
diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h
index ad5d0ba5b6ce9..7056340b9339e 100644
--- a/tools/testing/selftests/openat2/helpers.h
+++ b/tools/testing/selftests/openat2/helpers.h
@@ -9,6 +9,7 @@
 
 #define _GNU_SOURCE
 #include <stdint.h>
+#include <stdbool.h>
 #include <errno.h>
 #include <linux/types.h>
 #include "../kselftest.h"
-- 
2.34.1

[PATCH AUTOSEL 5.16 16/42] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

[Sasha Levin]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ]

Skip testcases that fail since the requested valid flags combination is not
supported by the underlying filesystem.

Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c
index 1bddbe934204c..7fb902099de45 100644
--- a/tools/testing/selftests/openat2/openat2_test.c
+++ b/tools/testing/selftests/openat2/openat2_test.c
@@ -259,6 +259,16 @@ void test_openat2_flags(void)
 		unlink(path);
 
 		fd = sys_openat2(AT_FDCWD, path, &test->how);
+		if (fd < 0 && fd == -EOPNOTSUPP) {
+			/*
+			 * Skip the testcase if it failed because not supported
+			 * by FS. (e.g. a valid O_TMPFILE combination on NFS)
+			 */
+			ksft_test_result_skip("openat2 with %s fails with %d (%s)\n",
+					      test->name, fd, strerror(-fd));
+			goto next;
+		}
+
 		if (test->err >= 0)
 			failed = (fd < 0);
 		else
@@ -303,7 +313,7 @@ void test_openat2_flags(void)
 		else
 			resultfn("openat2 with %s fails with %d (%s)\n",
 				 test->name, test->err, strerror(-test->err));
-
+next:
 		free(fdpath);
 		fflush(stdout);
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.16 17/42] selftests: skip mincore.check_file_mmap when fs lacks needed support

[Sasha Levin]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ]

Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying
filesystem lacks support of O_TMPFILE or fallocate since such failures
are not really related to mincore functionality.

Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/mincore/mincore_selftest.c      | 20 +++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c
index e54106643337b..4c88238fc8f05 100644
--- a/tools/testing/selftests/mincore/mincore_selftest.c
+++ b/tools/testing/selftests/mincore/mincore_selftest.c
@@ -207,15 +207,21 @@ TEST(check_file_mmap)
 
 	errno = 0;
 	fd = open(".", O_TMPFILE | O_RDWR, 0600);
-	ASSERT_NE(-1, fd) {
-		TH_LOG("Can't create temporary file: %s",
-			strerror(errno));
+	if (fd < 0) {
+		ASSERT_EQ(errno, EOPNOTSUPP) {
+			TH_LOG("Can't create temporary file: %s",
+			       strerror(errno));
+		}
+		SKIP(goto out_free, "O_TMPFILE not supported by filesystem.");
 	}
 	errno = 0;
 	retval = fallocate(fd, 0, 0, FILE_SIZE);
-	ASSERT_EQ(0, retval) {
-		TH_LOG("Error allocating space for the temporary file: %s",
-			strerror(errno));
+	if (retval) {
+		ASSERT_EQ(errno, EOPNOTSUPP) {
+			TH_LOG("Error allocating space for the temporary file: %s",
+			       strerror(errno));
+		}
+		SKIP(goto out_close, "fallocate not supported by filesystem.");
 	}
 
 	/*
@@ -271,7 +277,9 @@ TEST(check_file_mmap)
 	}
 
 	munmap(addr, FILE_SIZE);
+out_close:
 	close(fd);
+out_free:
 	free(vec);
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.16 18/42] ax25: improve the incomplete fix to avoid UAF and NPD bugs

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ]

The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching
AX25 device") introduce lock_sock() into ax25_kill_by_device to
prevent NPD bug. But the concurrency NPD or UAF bug will occur,
when lock_sock() or release_sock() dereferences the ax25_cb->sock.

The NULL pointer dereference bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
                             |     ax25_cb_del()
  ...                        |     ...
                             |     ax25->sk=NULL;
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |     ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is set to null before dereference
site (1) or (2). Therefore, this patch extracts the ax25_cb->sock
in advance, and uses ax25_list_lock to protect it, which can synchronize
with ax25_cb_del() and ensure the value of sock is not null before
dereference sites.

The concurrency UAF bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
  ...                        |   ...
                             |   sock_put(sk); //FREE
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |   ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is released before dereference
site (1) or (2). Therefore, this patch uses sock_hold() to increase
the refcount of sock and uses ax25_list_lock to protect it, which
can synchronize with ax25_cb_del() in ax25_destroy_socket() and
ensure the sock wil not be released before dereference sites.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 02f43f3e2c564..44a8730c26acc 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -77,6 +77,7 @@ static void ax25_kill_by_device(struct net_device *dev)
 {
 	ax25_dev *ax25_dev;
 	ax25_cb *s;
+	struct sock *sk;
 
 	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
 		return;
@@ -85,13 +86,15 @@ static void ax25_kill_by_device(struct net_device *dev)
 again:
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
+			sk = s->sk;
+			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
-			lock_sock(s->sk);
+			lock_sock(sk);
 			s->ax25_dev = NULL;
-			release_sock(s->sk);
+			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
-
+			sock_put(sk);
 			/* The entry could have been deleted from the
 			 * list meanwhile and thus the next pointer is
 			 * no longer valid.  Play it safe and restart
-- 
2.34.1

[PATCH AUTOSEL 5.16 19/42] cifs: unlock chan_lock before calling cifs_put_tcp_session

[Sasha Levin]

From: Shyam Prasad N <sprasad@microsoft.com>

[ Upstream commit 489f710a738e24d887823a010b8b206b4124e26f ]

While removing an smb session, we need to free up the
tcp session for each channel for that session. We were
doing this with chan_lock held. This results in a
cyclic dependency with cifs_tcp_ses_lock.

For now, unlock the chan_lock temporarily before calling
cifs_put_tcp_session. This should not cause any problem
for now, since we do not remove channels anywhere else.
And this code segment will not be called by two threads.

When we do implement the code for removing channels, we
will need to execute proper ref counting here.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 1060164b984a7..4c8db1a91e940 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1796,13 +1796,9 @@ void cifs_put_smb_ses(struct cifs_ses *ses)
 		int i;
 
 		for (i = 1; i < chan_count; i++) {
-			/*
-			 * note: for now, we're okay accessing ses->chans
-			 * without chan_lock. But when chans can go away, we'll
-			 * need to introduce ref counting to make sure that chan
-			 * is not freed from under us.
-			 */
+			spin_unlock(&ses->chan_lock);
 			cifs_put_tcp_session(ses->chans[i].server, 0);
+			spin_lock(&ses->chan_lock);
 			ses->chans[i].server = NULL;
 		}
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.16 20/42] pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP

[Sasha Levin]

From: Julian Braha <julianbraha@gmail.com>

[ Upstream commit 3a5286955bf5febc3d151bcb2c5e272e383b64aa ]

When PINCTRL_BCM63XX is selected,
and REGMAP is not selected,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for GPIO_REGMAP
  Depends on [n]: GPIOLIB [=y] && REGMAP [=n]
  Selected by [y]:
  - PINCTRL_BCM63XX [=y] && PINCTRL [=y]

This is because PINCTRL_BCM63XX
selects GPIO_REGMAP without selecting or depending on
REGMAP, despite GPIO_REGMAP depending on REGMAP.

This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20220117062557.89568-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/bcm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8fc1feedd8617..5116b014e2a4f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -35,6 +35,7 @@ config PINCTRL_BCM63XX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GPIOLIB
+	select REGMAP
 	select GPIO_REGMAP
 
 config PINCTRL_BCM6318
-- 
2.34.1

[PATCH AUTOSEL 5.16 21/42] vfs: make freeze_super abort when sync_filesystem returns error

[Sasha Levin]

From: "Darrick J. Wong" <djwong@kernel.org>

[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ]

If we fail to synchronize the filesystem while preparing to freeze the
fs, abort the freeze.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/super.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/super.c b/fs/super.c
index a6405d44d4ca2..d978dd031a036 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -1619,11 +1619,9 @@ static void lockdep_sb_freeze_acquire(struct super_block *sb)
 		percpu_rwsem_acquire(sb->s_writers.rw_sem + level, 0, _THIS_IP_);
 }
 
-static void sb_freeze_unlock(struct super_block *sb)
+static void sb_freeze_unlock(struct super_block *sb, int level)
 {
-	int level;
-
-	for (level = SB_FREEZE_LEVELS - 1; level >= 0; level--)
+	for (level--; level >= 0; level--)
 		percpu_up_write(sb->s_writers.rw_sem + level);
 }
 
@@ -1694,7 +1692,14 @@ int freeze_super(struct super_block *sb)
 	sb_wait_write(sb, SB_FREEZE_PAGEFAULT);
 
 	/* All writers are done so after syncing there won't be dirty data */
-	sync_filesystem(sb);
+	ret = sync_filesystem(sb);
+	if (ret) {
+		sb->s_writers.frozen = SB_UNFROZEN;
+		sb_freeze_unlock(sb, SB_FREEZE_PAGEFAULT);
+		wake_up(&sb->s_writers.wait_unfrozen);
+		deactivate_locked_super(sb);
+		return ret;
+	}
 
 	/* Now wait for internal filesystem counter */
 	sb->s_writers.frozen = SB_FREEZE_FS;
@@ -1706,7 +1711,7 @@ int freeze_super(struct super_block *sb)
 			printk(KERN_ERR
 				"VFS:Filesystem freeze failed\n");
 			sb->s_writers.frozen = SB_UNFROZEN;
-			sb_freeze_unlock(sb);
+			sb_freeze_unlock(sb, SB_FREEZE_FS);
 			wake_up(&sb->s_writers.wait_unfrozen);
 			deactivate_locked_super(sb);
 			return ret;
@@ -1751,7 +1756,7 @@ static int thaw_super_locked(struct super_block *sb)
 	}
 
 	sb->s_writers.frozen = SB_UNFROZEN;
-	sb_freeze_unlock(sb);
+	sb_freeze_unlock(sb, SB_FREEZE_FS);
 out:
 	wake_up(&sb->s_writers.wait_unfrozen);
 	deactivate_locked_super(sb);
-- 
2.34.1

[PATCH AUTOSEL 5.16 22/42] vfs: make sync_filesystem return errors from ->sync_fs

[Sasha Levin]

From: "Darrick J. Wong" <djwong@kernel.org>

[ Upstream commit 5679897eb104cec9e99609c3f045a0c20603da4c ]

Strangely, sync_filesystem ignores the return code from the ->sync_fs
call, which means that syscalls like syncfs(2) never see the error.
This doesn't seem right, so fix that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/sync.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/sync.c b/fs/sync.c
index 3ce8e2137f310..c7690016453e4 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -29,7 +29,7 @@
  */
 int sync_filesystem(struct super_block *sb)
 {
-	int ret;
+	int ret = 0;
 
 	/*
 	 * We need to be protected against the filesystem going from
@@ -52,15 +52,21 @@ int sync_filesystem(struct super_block *sb)
 	 * at a time.
 	 */
 	writeback_inodes_sb(sb, WB_REASON_SYNC);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 0);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 0);
+		if (ret)
+			return ret;
+	}
 	ret = sync_blockdev_nowait(sb->s_bdev);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	sync_inodes_sb(sb);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 1);
+		if (ret)
+			return ret;
+	}
 	return sync_blockdev(sb->s_bdev);
 }
 EXPORT_SYMBOL(sync_filesystem);
-- 
2.34.1

[PATCH AUTOSEL 5.16 23/42] quota: make dquot_quota_sync return errors from ->sync_fs

[Sasha Levin]

From: "Darrick J. Wong" <djwong@kernel.org>

[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ]

Strangely, dquot_quota_sync ignores the return code from the ->sync_fs
call, which means that quotacalls like Q_SYNC never see the error.  This
doesn't seem right, so fix that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 22d904bde6ab9..a74aef99bd3d6 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -690,9 +690,14 @@ int dquot_quota_sync(struct super_block *sb, int type)
 	/* This is not very clever (and fast) but currently I don't know about
 	 * any other simple way of getting quota data to disk and we must get
 	 * them there for userspace to be visible... */
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
-	sync_blockdev(sb->s_bdev);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 1);
+		if (ret)
+			return ret;
+	}
+	ret = sync_blockdev(sb->s_bdev);
+	if (ret)
+		return ret;
 
 	/*
 	 * Now when everything is written we can discard the pagecache so
-- 
2.34.1

[PATCH AUTOSEL 5.16 24/42] iommu: Fix potential use-after-free during probe

[Sasha Levin]

From: Vijayanand Jitta <quic_vjitta@quicinc.com>

[ Upstream commit b54240ad494300ff0994c4539a531727874381f4 ]

Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.

BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153

Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x33c
 show_stack+0x18/0x24
 dump_stack_lvl+0x16c/0x1e0
 print_address_description+0x84/0x39c
 __kasan_report+0x184/0x308
 kasan_report+0x50/0x78
 __asan_load8+0xc0/0xc4
 of_iommu_configure+0xb4/0x4a4
 of_dma_configure_id+0x2fc/0x4d4
 platform_dma_configure+0x40/0x5c
 really_probe+0x1b4/0xb74
 driver_probe_device+0x11c/0x228
 __device_attach_driver+0x14c/0x304
 bus_for_each_drv+0x124/0x1b0
 __device_attach+0x25c/0x334
 device_initial_probe+0x24/0x34
 bus_probe_device+0x78/0x134
 deferred_probe_work_func+0x130/0x1a8
 process_one_work+0x4c8/0x970
 worker_thread+0x5c8/0xaec
 kthread+0x1f8/0x220
 ret_from_fork+0x10/0x18

Allocated by task 1:
 ____kasan_kmalloc+0xd4/0x114
 __kasan_kmalloc+0x10/0x1c
 kmem_cache_alloc_trace+0xe4/0x3d4
 __iommu_probe_device+0x90/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Freed by task 1:
 kasan_set_track+0x4c/0x84
 kasan_set_free_info+0x28/0x4c
 ____kasan_slab_free+0x120/0x15c
 __kasan_slab_free+0x18/0x28
 slab_free_freelist_hook+0x204/0x2fc
 kfree+0xfc/0x3a4
 __iommu_probe_device+0x284/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iommu.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 8b86406b71627..3632bf8b4031c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -207,9 +207,14 @@ static struct dev_iommu *dev_iommu_get(struct device *dev)
 
 static void dev_iommu_free(struct device *dev)
 {
-	iommu_fwspec_free(dev);
-	kfree(dev->iommu);
+	struct dev_iommu *param = dev->iommu;
+
 	dev->iommu = NULL;
+	if (param->fwspec) {
+		fwnode_handle_put(param->fwspec->iommu_fwnode);
+		kfree(param->fwspec);
+	}
+	kfree(param);
 }
 
 static int __iommu_probe_device(struct device *dev, struct list_head *group_list)
-- 
2.34.1

[PATCH AUTOSEL 5.16 25/42] scsi: pm80xx: Fix double completion for SATA devices

[Sasha Levin]

From: Ajish Koshy <Ajish.Koshy@microchip.com>

[ Upstream commit c26b85ea16365079be8d206b20556a60a0c69ad4 ]

Current code handles completions for SATA devices in mpi_sata_completion()
and mpi_sata_event().

However, at the time when any SATA event happens, for almost all the event
types, the command is still in the target. It is therefore incorrect to
complete the task in sata_event().

There are some events for which we get sata_completions, some need recovery
procedure and others abort. All the tasks must be completed via
sata_completion() path.

Removed the task done related code from sata_events().  For tasks where we
don't get completions, let top layer call abort() to abort the command post
timeout.

Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Co-developed-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 18 ------------------
 drivers/scsi/pm8001/pm80xx_hwi.c | 26 --------------------------
 2 files changed, 44 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 4390c8b9170cd..066290dd57565 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2695,7 +2695,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	u32 tag = le32_to_cpu(psataPayload->tag);
 	u32 port_id = le32_to_cpu(psataPayload->port_id);
 	u32 dev_id = le32_to_cpu(psataPayload->device_id);
-	unsigned long flags;
 
 	ccb = &pm8001_ha->ccb_info[tag];
 
@@ -2735,8 +2734,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
-		if (pm8001_dev)
-			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
@@ -2778,7 +2775,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_QUEUE_FULL;
-			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
 			return;
 		}
 		break;
@@ -2864,20 +2860,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->stat = SAS_OPEN_TO;
 		break;
 	}
-	spin_lock_irqsave(&t->task_state_lock, flags);
-	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
-	t->task_state_flags |= SAS_TASK_STATE_DONE;
-	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
-		spin_unlock_irqrestore(&t->task_state_lock, flags);
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
-			   t, event, ts->resp, ts->stat);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
-	} else {
-		spin_unlock_irqrestore(&t->task_state_lock, flags);
-		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
-	}
 }
 
 /*See the comments for mpi_ssp_completion */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 2101fc5761c3c..d37365b2e88ee 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2828,7 +2828,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 	u32 tag = le32_to_cpu(psataPayload->tag);
 	u32 port_id = le32_to_cpu(psataPayload->port_id);
 	u32 dev_id = le32_to_cpu(psataPayload->device_id);
-	unsigned long flags;
 
 	ccb = &pm8001_ha->ccb_info[tag];
 
@@ -2866,8 +2865,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_DATA_OVERRUN;
 		ts->residual = 0;
-		if (pm8001_dev)
-			atomic_dec(&pm8001_dev->running_req);
 		break;
 	case IO_XFER_ERROR_BREAK:
 		pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
@@ -2916,11 +2913,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_QUEUE_FULL;
-			spin_unlock_irqrestore(&circularQ->oq_lock,
-					circularQ->lock_flags);
-			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
-			spin_lock_irqsave(&circularQ->oq_lock,
-					circularQ->lock_flags);
 			return;
 		}
 		break;
@@ -3020,24 +3012,6 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 		ts->stat = SAS_OPEN_TO;
 		break;
 	}
-	spin_lock_irqsave(&t->task_state_lock, flags);
-	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
-	t->task_state_flags |= SAS_TASK_STATE_DONE;
-	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
-		spin_unlock_irqrestore(&t->task_state_lock, flags);
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
-			   t, event, ts->resp, ts->stat);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
-	} else {
-		spin_unlock_irqrestore(&t->task_state_lock, flags);
-		spin_unlock_irqrestore(&circularQ->oq_lock,
-				circularQ->lock_flags);
-		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
-		spin_lock_irqsave(&circularQ->oq_lock,
-				circularQ->lock_flags);
-	}
 }
 
 /*See the comments for mpi_ssp_completion */
-- 
2.34.1

[PATCH AUTOSEL 5.16 26/42] kselftest: Fix vdso_test_abi return status

[Sasha Levin]

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

[ Upstream commit ec049891b2dc16591813eacaddc476b3d27c8c14 ]

vdso_test_abi contains a batch of tests that verify the validity of the
vDSO ABI.

When a vDSO symbol is not found the relevant test is skipped reporting
KSFT_SKIP. All the tests return values are then added in a single
variable which is checked to verify failures. This approach can have
side effects which result in reporting the wrong kselftest exit status.

Fix vdso_test_abi verifying the return code of each test separately.

Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/vDSO/vdso_test_abi.c | 135 +++++++++----------
 1 file changed, 62 insertions(+), 73 deletions(-)

diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c
index 3d603f1394af4..883ca85424bc5 100644
--- a/tools/testing/selftests/vDSO/vdso_test_abi.c
+++ b/tools/testing/selftests/vDSO/vdso_test_abi.c
@@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts);
 typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts);
 typedef time_t (*vdso_time_t)(time_t *t);
 
-static int vdso_test_gettimeofday(void)
+#define VDSO_TEST_PASS_MSG()	"\n%s(): PASS\n", __func__
+#define VDSO_TEST_FAIL_MSG(x)	"\n%s(): %s FAIL\n", __func__, x
+#define VDSO_TEST_SKIP_MSG(x)	"\n%s(): SKIP: Could not find %s\n", __func__, x
+
+static void vdso_test_gettimeofday(void)
 {
 	/* Find gettimeofday. */
 	vdso_gettimeofday_t vdso_gettimeofday =
 		(vdso_gettimeofday_t)vdso_sym(version, name[0]);
 
 	if (!vdso_gettimeofday) {
-		printf("Could not find %s\n", name[0]);
-		return KSFT_SKIP;
+		ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0]));
+		return;
 	}
 
 	struct timeval tv;
 	long ret = vdso_gettimeofday(&tv, 0);
 
 	if (ret == 0) {
-		printf("The time is %lld.%06lld\n",
-		       (long long)tv.tv_sec, (long long)tv.tv_usec);
+		ksft_print_msg("The time is %lld.%06lld\n",
+			       (long long)tv.tv_sec, (long long)tv.tv_usec);
+		ksft_test_result_pass(VDSO_TEST_PASS_MSG());
 	} else {
-		printf("%s failed\n", name[0]);
-		return KSFT_FAIL;
+		ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0]));
 	}
-
-	return KSFT_PASS;
 }
 
-static int vdso_test_clock_gettime(clockid_t clk_id)
+static void vdso_test_clock_gettime(clockid_t clk_id)
 {
 	/* Find clock_gettime. */
 	vdso_clock_gettime_t vdso_clock_gettime =
 		(vdso_clock_gettime_t)vdso_sym(version, name[1]);
 
 	if (!vdso_clock_gettime) {
-		printf("Could not find %s\n", name[1]);
-		return KSFT_SKIP;
+		ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1]));
+		return;
 	}
 
 	struct timespec ts;
 	long ret = vdso_clock_gettime(clk_id, &ts);
 
 	if (ret == 0) {
-		printf("The time is %lld.%06lld\n",
-		       (long long)ts.tv_sec, (long long)ts.tv_nsec);
+		ksft_print_msg("The time is %lld.%06lld\n",
+			       (long long)ts.tv_sec, (long long)ts.tv_nsec);
+		ksft_test_result_pass(VDSO_TEST_PASS_MSG());
 	} else {
-		printf("%s failed\n", name[1]);
-		return KSFT_FAIL;
+		ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1]));
 	}
-
-	return KSFT_PASS;
 }
 
-static int vdso_test_time(void)
+static void vdso_test_time(void)
 {
 	/* Find time. */
 	vdso_time_t vdso_time =
 		(vdso_time_t)vdso_sym(version, name[2]);
 
 	if (!vdso_time) {
-		printf("Could not find %s\n", name[2]);
-		return KSFT_SKIP;
+		ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2]));
+		return;
 	}
 
 	long ret = vdso_time(NULL);
 
 	if (ret > 0) {
-		printf("The time in hours since January 1, 1970 is %lld\n",
+		ksft_print_msg("The time in hours since January 1, 1970 is %lld\n",
 				(long long)(ret / 3600));
+		ksft_test_result_pass(VDSO_TEST_PASS_MSG());
 	} else {
-		printf("%s failed\n", name[2]);
-		return KSFT_FAIL;
+		ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2]));
 	}
-
-	return KSFT_PASS;
 }
 
-static int vdso_test_clock_getres(clockid_t clk_id)
+static void vdso_test_clock_getres(clockid_t clk_id)
 {
+	int clock_getres_fail = 0;
+
 	/* Find clock_getres. */
 	vdso_clock_getres_t vdso_clock_getres =
 		(vdso_clock_getres_t)vdso_sym(version, name[3]);
 
 	if (!vdso_clock_getres) {
-		printf("Could not find %s\n", name[3]);
-		return KSFT_SKIP;
+		ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3]));
+		return;
 	}
 
 	struct timespec ts, sys_ts;
 	long ret = vdso_clock_getres(clk_id, &ts);
 
 	if (ret == 0) {
-		printf("The resolution is %lld %lld\n",
-		       (long long)ts.tv_sec, (long long)ts.tv_nsec);
+		ksft_print_msg("The vdso resolution is %lld %lld\n",
+			       (long long)ts.tv_sec, (long long)ts.tv_nsec);
 	} else {
-		printf("%s failed\n", name[3]);
-		return KSFT_FAIL;
+		clock_getres_fail++;
 	}
 
 	ret = syscall(SYS_clock_getres, clk_id, &sys_ts);
 
-	if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) {
-		printf("%s failed\n", name[3]);
-		return KSFT_FAIL;
-	}
+	ksft_print_msg("The syscall resolution is %lld %lld\n",
+			(long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec);
 
-	return KSFT_PASS;
+	if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec))
+		clock_getres_fail++;
+
+	if (clock_getres_fail > 0) {
+		ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3]));
+	} else {
+		ksft_test_result_pass(VDSO_TEST_PASS_MSG());
+	}
 }
 
 const char *vdso_clock_name[12] = {
@@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = {
  * This function calls vdso_test_clock_gettime and vdso_test_clock_getres
  * with different values for clock_id.
  */
-static inline int vdso_test_clock(clockid_t clock_id)
+static inline void vdso_test_clock(clockid_t clock_id)
 {
-	int ret0, ret1;
-
-	ret0 = vdso_test_clock_gettime(clock_id);
-	/* A skipped test is considered passed */
-	if (ret0 == KSFT_SKIP)
-		ret0 = KSFT_PASS;
-
-	ret1 = vdso_test_clock_getres(clock_id);
-	/* A skipped test is considered passed */
-	if (ret1 == KSFT_SKIP)
-		ret1 = KSFT_PASS;
+	ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]);
 
-	ret0 += ret1;
+	vdso_test_clock_gettime(clock_id);
 
-	printf("clock_id: %s", vdso_clock_name[clock_id]);
-
-	if (ret0 > 0)
-		printf(" [FAIL]\n");
-	else
-		printf(" [PASS]\n");
-
-	return ret0;
+	vdso_test_clock_getres(clock_id);
 }
 
+#define VDSO_TEST_PLAN	16
+
 int main(int argc, char **argv)
 {
 	unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR);
-	int ret;
+
+	ksft_print_header();
+	ksft_set_plan(VDSO_TEST_PLAN);
 
 	if (!sysinfo_ehdr) {
 		printf("AT_SYSINFO_EHDR is not present!\n");
@@ -201,44 +192,42 @@ int main(int argc, char **argv)
 
 	vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR));
 
-	ret = vdso_test_gettimeofday();
+	vdso_test_gettimeofday();
 
 #if _POSIX_TIMERS > 0
 
 #ifdef CLOCK_REALTIME
-	ret += vdso_test_clock(CLOCK_REALTIME);
+	vdso_test_clock(CLOCK_REALTIME);
 #endif
 
 #ifdef CLOCK_BOOTTIME
-	ret += vdso_test_clock(CLOCK_BOOTTIME);
+	vdso_test_clock(CLOCK_BOOTTIME);
 #endif
 
 #ifdef CLOCK_TAI
-	ret += vdso_test_clock(CLOCK_TAI);
+	vdso_test_clock(CLOCK_TAI);
 #endif
 
 #ifdef CLOCK_REALTIME_COARSE
-	ret += vdso_test_clock(CLOCK_REALTIME_COARSE);
+	vdso_test_clock(CLOCK_REALTIME_COARSE);
 #endif
 
 #ifdef CLOCK_MONOTONIC
-	ret += vdso_test_clock(CLOCK_MONOTONIC);
+	vdso_test_clock(CLOCK_MONOTONIC);
 #endif
 
 #ifdef CLOCK_MONOTONIC_RAW
-	ret += vdso_test_clock(CLOCK_MONOTONIC_RAW);
+	vdso_test_clock(CLOCK_MONOTONIC_RAW);
 #endif
 
 #ifdef CLOCK_MONOTONIC_COARSE
-	ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE);
+	vdso_test_clock(CLOCK_MONOTONIC_COARSE);
 #endif
 
 #endif
 
-	ret += vdso_test_time();
-
-	if (ret > 0)
-		return KSFT_FAIL;
+	vdso_test_time();
 
-	return KSFT_PASS;
+	ksft_print_cnts();
+	return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.16 27/42] scsi: core: Reallocate device's budget map on queue depth change

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit edb854a3680bacc9ef9b91ec0c5ff6105886f6f3 ]

We currently use ->cmd_per_lun as initial queue depth for setting up the
budget_map. Martin Wilck reported that it is common for the queue_depth to
be subsequently updated in slave_configure() based on detected hardware
characteristics.

As a result, for some drivers, the static host template settings for
cmd_per_lun and can_queue won't actually get used in practice. And if the
default values are used to allocate the budget_map, memory may be consumed
unnecessarily.

Fix the issue by reallocating the budget_map after ->slave_configure()
returns. At that time the device queue_depth should accurately reflect what
the hardware needs.

Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Martin Wilck <martin.wilck@suse.com>
Suggested-by: Martin Wilck <martin.wilck@suse.com>
Tested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_scan.c | 55 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 50 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 23e1c0acdeaee..d0ce723299bf7 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -214,6 +214,48 @@ static void scsi_unlock_floptical(struct scsi_device *sdev,
 			 SCSI_TIMEOUT, 3, NULL);
 }
 
+static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
+					unsigned int depth)
+{
+	int new_shift = sbitmap_calculate_shift(depth);
+	bool need_alloc = !sdev->budget_map.map;
+	bool need_free = false;
+	int ret;
+	struct sbitmap sb_backup;
+
+	/*
+	 * realloc if new shift is calculated, which is caused by setting
+	 * up one new default queue depth after calling ->slave_configure
+	 */
+	if (!need_alloc && new_shift != sdev->budget_map.shift)
+		need_alloc = need_free = true;
+
+	if (!need_alloc)
+		return 0;
+
+	/*
+	 * Request queue has to be frozen for reallocating budget map,
+	 * and here disk isn't added yet, so freezing is pretty fast
+	 */
+	if (need_free) {
+		blk_mq_freeze_queue(sdev->request_queue);
+		sb_backup = sdev->budget_map;
+	}
+	ret = sbitmap_init_node(&sdev->budget_map,
+				scsi_device_max_queue_depth(sdev),
+				new_shift, GFP_KERNEL,
+				sdev->request_queue->node, false, true);
+	if (need_free) {
+		if (ret)
+			sdev->budget_map = sb_backup;
+		else
+			sbitmap_free(&sb_backup);
+		ret = 0;
+		blk_mq_unfreeze_queue(sdev->request_queue);
+	}
+	return ret;
+}
+
 /**
  * scsi_alloc_sdev - allocate and setup a scsi_Device
  * @starget: which target to allocate a &scsi_device for
@@ -306,11 +348,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	 * default device queue depth to figure out sbitmap shift
 	 * since we use this queue depth most of times.
 	 */
-	if (sbitmap_init_node(&sdev->budget_map,
-				scsi_device_max_queue_depth(sdev),
-				sbitmap_calculate_shift(depth),
-				GFP_KERNEL, sdev->request_queue->node,
-				false, true)) {
+	if (scsi_realloc_sdev_budget_map(sdev, depth)) {
 		put_device(&starget->dev);
 		kfree(sdev);
 		goto out;
@@ -1017,6 +1055,13 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 			}
 			return SCSI_SCAN_NO_RESPONSE;
 		}
+
+		/*
+		 * The queue_depth is often changed in ->slave_configure.
+		 * Set up budget map again since memory consumption of
+		 * the map depends on actual queue depth.
+		 */
+		scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
 	}
 
 	if (sdev->scsi_level >= SCSI_3)
-- 
2.34.1

[PATCH AUTOSEL 5.16 28/42] scsi: pm8001: Fix use-after-free for aborted TMF sas_task

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 61f162aa4381845acbdc7f2be4dfb694d027c018 ]

Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.

When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().

However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.

Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 83e73009db5cd..c0b45b8a513d7 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -753,8 +753,13 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 		res = -TMF_RESP_FUNC_FAILED;
 		/* Even TMF timed out, return direct. */
 		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			struct pm8001_ccb_info *ccb = task->lldd_task;
+
 			pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n",
 				   tmf->tmf);
+
+			if (ccb)
+				ccb->task = NULL;
 			goto ex_err;
 		}
 
-- 
2.34.1

[PATCH AUTOSEL 5.16 29/42] scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit df7abcaa1246e2537ab4016077b5443bb3c09378 ]

Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().

In this case, the following are the two steps in handling those I/O
completions:

 - Call complete() to inform the upper layer handler of completion of
   the I/O.

 - Release driver resources associated with the sas_task in
   pm8001_ccb_task_free() call.

When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.

Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.

Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index d37365b2e88ee..26293485198aa 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2184,9 +2184,9 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm8001_dbg(pm8001_ha, FAIL,
 			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			   t, status, ts->resp, ts->stat);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 		if (t->slow_task)
 			complete(&t->slow_task->completion);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
 		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
@@ -2801,9 +2801,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 		pm8001_dbg(pm8001_ha, FAIL,
 			   "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			   t, status, ts->resp, ts->stat);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 		if (t->slow_task)
 			complete(&t->slow_task->completion);
-		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
 		spin_unlock_irqrestore(&circularQ->oq_lock,
-- 
2.34.1

[PATCH AUTOSEL 5.16 30/42] drm/amd: Warn users about potential s0ix problems

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit a6ed2035878e5ad2e43ed175d8812ac9399d6c40 ]

On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`.  Before commit 6dc8265f9803 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash.  Now when
configured this way, the system should resume but will use more power.

As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.

Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h      |  8 ++++++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 24 +++++++++++++++++++-----
 2 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 7d67aec6f4a2b..0a5a5370a2004 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1406,12 +1406,10 @@ int amdgpu_acpi_smart_shift_update(struct drm_device *dev, enum amdgpu_ss ss_sta
 int amdgpu_acpi_pcie_notify_device_ready(struct amdgpu_device *adev);
 
 void amdgpu_acpi_get_backlight_caps(struct amdgpu_dm_backlight_caps *caps);
-bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev);
 void amdgpu_acpi_detect(void);
 #else
 static inline int amdgpu_acpi_init(struct amdgpu_device *adev) { return 0; }
 static inline void amdgpu_acpi_fini(struct amdgpu_device *adev) { }
-static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; }
 static inline void amdgpu_acpi_detect(void) { }
 static inline bool amdgpu_acpi_is_power_shift_control_supported(void) { return false; }
 static inline int amdgpu_acpi_power_shift_control(struct amdgpu_device *adev,
@@ -1420,6 +1418,12 @@ static inline int amdgpu_acpi_smart_shift_update(struct drm_device *dev,
 						 enum amdgpu_ss ss_state) { return 0; }
 #endif
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND)
+bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev);
+#else
+static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; }
+#endif
+
 int amdgpu_cs_find_mapping(struct amdgpu_cs_parser *parser,
 			   uint64_t addr, struct amdgpu_bo **bo,
 			   struct amdgpu_bo_va_mapping **mapping);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
index 4811b0faafd9a..b19d407518024 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -1031,6 +1031,7 @@ void amdgpu_acpi_detect(void)
 	}
 }
 
+#if IS_ENABLED(CONFIG_SUSPEND)
 /**
  * amdgpu_acpi_is_s0ix_active
  *
@@ -1040,11 +1041,24 @@ void amdgpu_acpi_detect(void)
  */
 bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev)
 {
-#if IS_ENABLED(CONFIG_AMD_PMC) && IS_ENABLED(CONFIG_SUSPEND)
-	if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) {
-		if (adev->flags & AMD_IS_APU)
-			return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
+	if (!(adev->flags & AMD_IS_APU) ||
+	    (pm_suspend_target_state != PM_SUSPEND_TO_IDLE))
+		return false;
+
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) {
+		dev_warn_once(adev->dev,
+			      "Power consumption will be higher as BIOS has not been configured for suspend-to-idle.\n"
+			      "To use suspend-to-idle change the sleep mode in BIOS setup.\n");
+		return false;
 	}
-#endif
+
+#if !IS_ENABLED(CONFIG_AMD_PMC)
+	dev_warn_once(adev->dev,
+		      "Power consumption will be higher as the kernel has not been compiled with CONFIG_AMD_PMC.\n");
 	return false;
+#else
+	return true;
+#endif /* CONFIG_AMD_PMC */
 }
+
+#endif /* CONFIG_SUSPEND */
-- 
2.34.1

[PATCH AUTOSEL 5.16 31/42] mailmap: update Christian Brauner's email address

[Sasha Levin]

From: Christian Brauner <brauner@kernel.org>

[ Upstream commit 1a2beb3d5a0b4051067ecf49ea799bee340e0e7c ]

At least one of the addresses will stop functioning after February.

Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .mailmap | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/.mailmap b/.mailmap
index b344067e0acb6..3979fb166e0fd 100644
--- a/.mailmap
+++ b/.mailmap
@@ -74,6 +74,9 @@ Chris Chiu <chris.chiu@canonical.com> <chiu@endlessos.org>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntraeger@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <cborntra@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
+Christian Brauner <brauner@kernel.org> <christian@brauner.io>
+Christian Brauner <brauner@kernel.org> <christian.brauner@canonical.com>
+Christian Brauner <brauner@kernel.org> <christian.brauner@ubuntu.com>
 Christophe Ricard <christophe.ricard@gmail.com>
 Christoph Hellwig <hch@lst.de>
 Colin Ian King <colin.king@intel.com> <colin.king@canonical.com>
-- 
2.34.1

[PATCH AUTOSEL 5.16 32/42] nvme: fix a possible use-after-free in controller reset during load

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ]

Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.

The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
   schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free

In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.

This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)

So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 1af8a4513708a..9a6586c69afe8 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4258,7 +4258,14 @@ static void nvme_async_event_work(struct work_struct *work)
 		container_of(work, struct nvme_ctrl, async_event_work);
 
 	nvme_aen_uevent(ctrl);
-	ctrl->ops->submit_async_event(ctrl);
+
+	/*
+	 * The transport drivers must guarantee AER submission here is safe by
+	 * flushing ctrl async_event_work after changing the controller state
+	 * from LIVE and before freeing the admin queue.
+	*/
+	if (ctrl->state == NVME_CTRL_LIVE)
+		ctrl->ops->submit_async_event(ctrl);
 }
 
 static bool nvme_ctrl_pp_status(struct nvme_ctrl *ctrl)
-- 
2.34.1

[PATCH AUTOSEL 5.16 33/42] nvme-tcp: fix possible use-after-free in transport error_recovery work

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit ff9fc7ebf5c06de1ef72a69f9b1ab40af8b07f9e ]

While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 4ceb28675fdf6..01e24b5703dbc 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -2096,6 +2096,7 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 	struct nvme_ctrl *ctrl = &tcp_ctrl->ctrl;
 
 	nvme_stop_keep_alive(ctrl);
+	flush_work(&ctrl->async_event_work);
 	nvme_tcp_teardown_io_queues(ctrl, false);
 	/* unquiesce to fail fast pending requests */
 	nvme_start_queues(ctrl);
-- 
2.34.1

[PATCH AUTOSEL 5.16 34/42] nvme-rdma: fix possible use-after-free in transport error_recovery work

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ]

While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 850f84d204d05..9c55e4be8a398 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1200,6 +1200,7 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work)
 			struct nvme_rdma_ctrl, err_work);
 
 	nvme_stop_keep_alive(&ctrl->ctrl);
+	flush_work(&ctrl->ctrl.async_event_work);
 	nvme_rdma_teardown_io_queues(ctrl, false);
 	nvme_start_queues(&ctrl->ctrl);
 	nvme_rdma_teardown_admin_queue(ctrl, false);
-- 
2.34.1

[PATCH AUTOSEL 5.16 35/42] net: sparx5: do not refer to skb after passing it on

[Sasha Levin]

From: Steen Hegelund <steen.hegelund@microchip.com>

[ Upstream commit 81eb8b0b18789e647e65579303529fd52d861cc2 ]

Do not try to use any SKB fields after the packet has been passed up in the
receive stack.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_packet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
index dc7e5ea6ec158..148d431fcde42 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
@@ -145,9 +145,9 @@ static void sparx5_xtr_grp(struct sparx5 *sparx5, u8 grp, bool byte_swap)
 	skb_put(skb, byte_cnt - ETH_FCS_LEN);
 	eth_skb_pad(skb);
 	skb->protocol = eth_type_trans(skb, netdev);
-	netif_rx(skb);
 	netdev->stats.rx_bytes += skb->len;
 	netdev->stats.rx_packets++;
+	netif_rx(skb);
 }
 
 static int sparx5_inject(struct sparx5 *sparx5,
-- 
2.34.1

[PATCH AUTOSEL 5.16 36/42] drm/amd: add support to check whether the system is set to s3

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit f52a2b8badbd24faf73a13c9c07fdb9d07352944 ]

This will be used to help make decisions on what to do in
misconfigured systems.

v2: squash in semicolon fix from Stephen Rothwell

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h      |  2 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 0a5a5370a2004..f59121ec26485 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1419,9 +1419,11 @@ static inline int amdgpu_acpi_smart_shift_update(struct drm_device *dev,
 #endif
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND)
+bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev);
 bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev);
 #else
 static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; }
+static inline bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev) { return false; }
 #endif
 
 int amdgpu_cs_find_mapping(struct amdgpu_cs_parser *parser,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
index b19d407518024..0e12315fa0cb8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -1032,6 +1032,19 @@ void amdgpu_acpi_detect(void)
 }
 
 #if IS_ENABLED(CONFIG_SUSPEND)
+/**
+ * amdgpu_acpi_is_s3_active
+ *
+ * @adev: amdgpu_device_pointer
+ *
+ * returns true if supported, false if not.
+ */
+bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev)
+{
+	return !(adev->flags & AMD_IS_APU) ||
+		(pm_suspend_target_state == PM_SUSPEND_MEM);
+}
+
 /**
  * amdgpu_acpi_is_s0ix_active
  *
-- 
2.34.1

[PATCH AUTOSEL 5.16 37/42] drm/amd: Only run s3 or s0ix if system is configured properly

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 04ef860469fda6a646dc841190d05b31fae68e8c ]

This will cause misconfigured systems to not run the GPU suspend
routines.

* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
  s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
  the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
  present, the dGPU will go through S3

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index f999638a04ed6..9c971053b334e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2236,6 +2236,7 @@ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work)
 static int amdgpu_pmops_prepare(struct device *dev)
 {
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = drm_to_adev(drm_dev);
 
 	/* Return a positive number here so
 	 * DPM_FLAG_SMART_SUSPEND works properly
@@ -2244,6 +2245,13 @@ static int amdgpu_pmops_prepare(struct device *dev)
 		return pm_runtime_suspended(dev) &&
 			pm_suspend_via_firmware();
 
+	/* if we will not support s3 or s2i for the device
+	 *  then skip suspend
+	 */
+	if (!amdgpu_acpi_is_s0ix_active(adev) &&
+	    !amdgpu_acpi_is_s3_active(adev))
+		return 1;
+
 	return 0;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.16 38/42] drm/amdgpu: fix logic inversion in check

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit e8ae38720e1a685fd98cfa5ae118c9d07b45ca79 ]

We probably never trigger this, but the logic inside the check is
inverted.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index c875f1cdd2af7..ffc3ce0004e99 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1913,7 +1913,7 @@ int amdgpu_copy_buffer(struct amdgpu_ring *ring, uint64_t src_offset,
 	unsigned i;
 	int r;
 
-	if (direct_submit && !ring->sched.ready) {
+	if (!direct_submit && !ring->sched.ready) {
 		DRM_ERROR("Trying to move memory with ring turned off.\n");
 		return -EINVAL;
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.16 39/42] x86/Xen: streamline (and fix) PV CPU enumeration

[Sasha Levin]

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit e25a8d959992f61b64a58fc62fb7951dc6f31d1f ]

This started out with me noticing that "dom0_max_vcpus=<N>" with <N>
larger than the number of physical CPUs reported through ACPI tables
would not bring up the "excess" vCPU-s. Addressing this is the primary
purpose of the change; CPU maps handling is being tidied only as far as
is necessary for the change here (with the effect of also avoiding the
setting up of too much per-CPU infrastructure, i.e. for CPUs which can
never come online).

Noticing that xen_fill_possible_map() is called way too early, whereas
xen_filter_cpu_maps() is called too late (after per-CPU areas were
already set up), and further observing that each of the functions serves
only one of Dom0 or DomU, it looked like it was better to simplify this.
Use the .get_smp_config hook instead, uniformly for Dom0 and DomU.
xen_fill_possible_map() can be dropped altogether, while
xen_filter_cpu_maps() is re-purposed but not otherwise changed.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/enlighten_pv.c |  4 ----
 arch/x86/xen/smp_pv.c       | 26 ++++++--------------------
 2 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 5004feb16783d..d47c3d176ae4b 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1341,10 +1341,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 		xen_acpi_sleep_register();
 
-		/* Avoid searching for BIOS MP tables */
-		x86_init.mpparse.find_smp_config = x86_init_noop;
-		x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-
 		xen_boot_params_init_edd();
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 6a8f3b53ab834..4a6019238ee7d 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -148,28 +148,12 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	return rc;
 }
 
-static void __init xen_fill_possible_map(void)
-{
-	int i, rc;
-
-	if (xen_initial_domain())
-		return;
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0) {
-			num_processors++;
-			set_cpu_possible(i, true);
-		}
-	}
-}
-
-static void __init xen_filter_cpu_maps(void)
+static void __init _get_smp_config(unsigned int early)
 {
 	int i, rc;
 	unsigned int subtract = 0;
 
-	if (!xen_initial_domain())
+	if (early)
 		return;
 
 	num_processors = 0;
@@ -210,7 +194,6 @@ static void __init xen_pv_smp_prepare_boot_cpu(void)
 		 * sure the old memory can be recycled. */
 		make_lowmem_page_readwrite(xen_initial_gdt);
 
-	xen_filter_cpu_maps();
 	xen_setup_vcpu_info_placement();
 
 	/*
@@ -476,5 +459,8 @@ static const struct smp_ops xen_smp_ops __initconst = {
 void __init xen_smp_init(void)
 {
 	smp_ops = xen_smp_ops;
-	xen_fill_possible_map();
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = _get_smp_config;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.16 40/42] Revert "module, async: async_synchronize_full() on module init iff async is used"

[Sasha Levin]

From: Igor Pylypiv <ipylypiv@google.com>

[ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ]

This reverts commit 774a1221e862b343388347bac9b318767336b20b.

We need to finish all async code before the module init sequence is
done.  In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule().  Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked.  This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:

	if (cpu < nr_cpu_ids)
		error = work_on_cpu(cpu, local_pci_probe, &ddi);
	else
		error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread.  As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)

modprobe pm80xx                      worker
...
  do_init_module()
  ...
    pci_call_probe()
      work_on_cpu(local_pci_probe)
                                     local_pci_probe()
                                       pm8001_pci_probe()
                                         scsi_scan_host()
                                           async_schedule()
                                           worker->flags |= PF_USED_ASYNC;
                                     ...
      < return from worker >
  ...
  if (current->flags & PF_USED_ASYNC) <--- false
  	async_synchronize_full();

Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.

Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.

Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sched.h |  1 -
 kernel/async.c        |  3 ---
 kernel/module.c       | 25 +++++--------------------
 3 files changed, 5 insertions(+), 24 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 78c351e35fec6..ee5ed88219631 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1672,7 +1672,6 @@ extern struct pid *cad_pid;
 #define PF_MEMALLOC		0x00000800	/* Allocating memory */
 #define PF_NPROC_EXCEEDED	0x00001000	/* set_user() noticed that RLIMIT_NPROC was exceeded */
 #define PF_USED_MATH		0x00002000	/* If unset the fpu must be initialized before use */
-#define PF_USED_ASYNC		0x00004000	/* Used async_schedule*(), used by module init */
 #define PF_NOFREEZE		0x00008000	/* This thread should not be frozen */
 #define PF_FROZEN		0x00010000	/* Frozen for system suspend */
 #define PF_KSWAPD		0x00020000	/* I am kswapd */
diff --git a/kernel/async.c b/kernel/async.c
index b8d7a663497f9..b2c4ba5686ee4 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -205,9 +205,6 @@ async_cookie_t async_schedule_node_domain(async_func_t func, void *data,
 	atomic_inc(&entry_count);
 	spin_unlock_irqrestore(&async_lock, flags);
 
-	/* mark that this task has queued an async job, used by module init */
-	current->flags |= PF_USED_ASYNC;
-
 	/* schedule for execution */
 	queue_work_node(node, system_unbound_wq, &entry->work);
 
diff --git a/kernel/module.c b/kernel/module.c
index 84a9141a5e159..f25e7653aa150 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3722,12 +3722,6 @@ static noinline int do_init_module(struct module *mod)
 	}
 	freeinit->module_init = mod->init_layout.base;
 
-	/*
-	 * We want to find out whether @mod uses async during init.  Clear
-	 * PF_USED_ASYNC.  async_schedule*() will set it.
-	 */
-	current->flags &= ~PF_USED_ASYNC;
-
 	do_mod_ctors(mod);
 	/* Start the module */
 	if (mod->init != NULL)
@@ -3753,22 +3747,13 @@ static noinline int do_init_module(struct module *mod)
 
 	/*
 	 * We need to finish all async code before the module init sequence
-	 * is done.  This has potential to deadlock.  For example, a newly
-	 * detected block device can trigger request_module() of the
-	 * default iosched from async probing task.  Once userland helper
-	 * reaches here, async_synchronize_full() will wait on the async
-	 * task waiting on request_module() and deadlock.
-	 *
-	 * This deadlock is avoided by perfomring async_synchronize_full()
-	 * iff module init queued any async jobs.  This isn't a full
-	 * solution as it will deadlock the same if module loading from
-	 * async jobs nests more than once; however, due to the various
-	 * constraints, this hack seems to be the best option for now.
-	 * Please refer to the following thread for details.
+	 * is done. This has potential to deadlock if synchronous module
+	 * loading is requested from async (which is not allowed!).
 	 *
-	 * http://thread.gmane.org/gmane.linux.kernel/1420814
+	 * See commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
+	 * request_module() from async workers") for more details.
 	 */
-	if (!mod->async_probe_requested && (current->flags & PF_USED_ASYNC))
+	if (!mod->async_probe_requested)
 		async_synchronize_full();
 
 	ftrace_free_mem(mod, mod->init_layout.base, mod->init_layout.base +
-- 
2.34.1

[PATCH AUTOSEL 5.16 41/42] gcc-plugins/stackleak: Use noinstr in favor of notrace

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit dcb85f85fa6f142aae1fe86f399d4503d49f2b60 ]

While the stackleak plugin was already using notrace, objtool is now a
bit more picky.  Update the notrace uses to noinstr.  Silences the
following objtool warnings when building with:

CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y

  vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section

Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.

Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/stackleak.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/kernel/stackleak.c b/kernel/stackleak.c
index ce161a8e8d975..dd07239ddff9f 100644
--- a/kernel/stackleak.c
+++ b/kernel/stackleak.c
@@ -48,7 +48,7 @@ int stack_erasing_sysctl(struct ctl_table *table, int write,
 #define skip_erasing()	false
 #endif /* CONFIG_STACKLEAK_RUNTIME_DISABLE */
 
-asmlinkage void notrace stackleak_erase(void)
+asmlinkage void noinstr stackleak_erase(void)
 {
 	/* It would be nice not to have 'kstack_ptr' and 'boundary' on stack */
 	unsigned long kstack_ptr = current->lowest_stack;
@@ -102,9 +102,8 @@ asmlinkage void notrace stackleak_erase(void)
 	/* Reset the 'lowest_stack' value for the next syscall */
 	current->lowest_stack = current_top_of_stack() - THREAD_SIZE/64;
 }
-NOKPROBE_SYMBOL(stackleak_erase);
 
-void __used __no_caller_saved_registers notrace stackleak_track_stack(void)
+void __used __no_caller_saved_registers noinstr stackleak_track_stack(void)
 {
 	unsigned long sp = current_stack_pointer;
 
-- 
2.34.1

[PATCH AUTOSEL 5.16 42/42] random: wake up /dev/random writers after zap

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit 042e293e16e3aa9794ce60c29f5b7b0c8170f933 ]

When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/random.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index a27ae3999ff32..ebe86de9d0acc 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1963,7 +1963,10 @@ static long random_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 		 */
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		input_pool.entropy_count = 0;
+		if (xchg(&input_pool.entropy_count, 0) && random_write_wakeup_bits) {
+			wake_up_interruptible(&random_write_wait);
+			kill_fasync(&fasync, SIGIO, POLL_OUT);
+		}
 		return 0;
 	case RNDRESEEDCRNG:
 		if (!capable(CAP_SYS_ADMIN))
-- 
2.34.1