From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jens Axboe <axboe@kernel.dk>,
Christian Marangi <ansuelsmth@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [net-next PATCH v2 08/15] net: dsa: qca8k: move fast age/MTU/port enable/disable functions to common code
Date: Tue, 19 Jul 2022 02:57:19 +0200 [thread overview]
Message-ID: <20220719005726.8739-10-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220719005726.8739-1-ansuelsmth@gmail.com>
The same fast age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca/qca8k-8xxx.c | 98 ------------------------------
drivers/net/dsa/qca/qca8k-common.c | 98 ++++++++++++++++++++++++++++++
drivers/net/dsa/qca/qca8k.h | 13 ++++
3 files changed, 111 insertions(+), 98 deletions(-)
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index 729f63a865d1..95bf65121ed6 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1575,104 +1575,6 @@ qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
return ret;
}
-static void
-qca8k_port_fast_age(struct dsa_switch *ds, int port)
-{
- struct qca8k_priv *priv = ds->priv;
-
- mutex_lock(&priv->reg_mutex);
- qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port);
- mutex_unlock(&priv->reg_mutex);
-}
-
-static int
-qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
-{
- struct qca8k_priv *priv = ds->priv;
- unsigned int secs = msecs / 1000;
- u32 val;
-
- /* AGE_TIME reg is set in 7s step */
- val = secs / 7;
-
- /* Handle case with 0 as val to NOT disable
- * learning
- */
- if (!val)
- val = 1;
-
- return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK,
- QCA8K_ATU_AGE_TIME(val));
-}
-
-static int
-qca8k_port_enable(struct dsa_switch *ds, int port,
- struct phy_device *phy)
-{
- struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
- qca8k_port_set_status(priv, port, 1);
- priv->port_enabled_map |= BIT(port);
-
- if (dsa_is_user_port(ds, port))
- phy_support_asym_pause(phy);
-
- return 0;
-}
-
-static void
-qca8k_port_disable(struct dsa_switch *ds, int port)
-{
- struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
- qca8k_port_set_status(priv, port, 0);
- priv->port_enabled_map &= ~BIT(port);
-}
-
-static int
-qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
-{
- struct qca8k_priv *priv = ds->priv;
- int ret;
-
- /* We have only have a general MTU setting.
- * DSA always set the CPU port's MTU to the largest MTU of the slave
- * ports.
- * Setting MTU just for the CPU port is sufficient to correctly set a
- * value for every port.
- */
- if (!dsa_is_cpu_port(ds, port))
- return 0;
-
- /* To change the MAX_FRAME_SIZE the cpu ports must be off or
- * the switch panics.
- * Turn off both cpu ports before applying the new value to prevent
- * this.
- */
- if (priv->port_enabled_map & BIT(0))
- qca8k_port_set_status(priv, 0, 0);
-
- if (priv->port_enabled_map & BIT(6))
- qca8k_port_set_status(priv, 6, 0);
-
- /* Include L2 header / FCS length */
- ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu + ETH_HLEN + ETH_FCS_LEN);
-
- if (priv->port_enabled_map & BIT(0))
- qca8k_port_set_status(priv, 0, 1);
-
- if (priv->port_enabled_map & BIT(6))
- qca8k_port_set_status(priv, 6, 1);
-
- return ret;
-}
-
-static int
-qca8k_port_max_mtu(struct dsa_switch *ds, int port)
-{
- return QCA8K_MAX_MTU;
-}
-
static int
qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
u16 port_mask, u16 vid)
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index 129a82172945..598d6577835a 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -715,3 +715,101 @@ void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
}
+
+void
+qca8k_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+int
+qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+ struct qca8k_priv *priv = ds->priv;
+ unsigned int secs = msecs / 1000;
+ u32 val;
+
+ /* AGE_TIME reg is set in 7s step */
+ val = secs / 7;
+
+ /* Handle case with 0 as val to NOT disable
+ * learning
+ */
+ if (!val)
+ val = 1;
+
+ return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK,
+ QCA8K_ATU_AGE_TIME(val));
+}
+
+int
+qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 1);
+ priv->port_enabled_map |= BIT(port);
+
+ if (dsa_is_user_port(ds, port))
+ phy_support_asym_pause(phy);
+
+ return 0;
+}
+
+void
+qca8k_port_disable(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+ priv->port_enabled_map &= ~BIT(port);
+}
+
+int
+qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ /* We have only have a general MTU setting.
+ * DSA always set the CPU port's MTU to the largest MTU of the slave
+ * ports.
+ * Setting MTU just for the CPU port is sufficient to correctly set a
+ * value for every port.
+ */
+ if (!dsa_is_cpu_port(ds, port))
+ return 0;
+
+ /* To change the MAX_FRAME_SIZE the cpu ports must be off or
+ * the switch panics.
+ * Turn off both cpu ports before applying the new value to prevent
+ * this.
+ */
+ if (priv->port_enabled_map & BIT(0))
+ qca8k_port_set_status(priv, 0, 0);
+
+ if (priv->port_enabled_map & BIT(6))
+ qca8k_port_set_status(priv, 6, 0);
+
+ /* Include L2 header / FCS length */
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu + ETH_HLEN + ETH_FCS_LEN);
+
+ if (priv->port_enabled_map & BIT(0))
+ qca8k_port_set_status(priv, 0, 1);
+
+ if (priv->port_enabled_map & BIT(6))
+ qca8k_port_set_status(priv, 6, 1);
+
+ return ret;
+}
+
+int
+qca8k_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return QCA8K_MAX_MTU;
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index dd3072e2f23c..bc9078ae2b70 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -469,4 +469,17 @@ int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
struct dsa_bridge bridge);
+/* Common fast age function */
+void qca8k_port_fast_age(struct dsa_switch *ds, int port);
+int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs);
+
+/* Common port enable/disable function */
+int qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy);
+void qca8k_port_disable(struct dsa_switch *ds, int port);
+
+/* Common MTU function */
+int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu);
+int qca8k_port_max_mtu(struct dsa_switch *ds, int port);
+
#endif /* __QCA8K_H */
--
2.36.1
next prev parent reply other threads:[~2022-07-19 1:16 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-19 0:57 [net-next PATCH v2 00/15] net: dsa: qca8k: code split for qca8k Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 01/15] net: dsa: qca8k: make mib autocast feature optional Christian Marangi
2022-07-19 12:26 ` Vladimir Oltean
2022-07-19 12:29 ` Christian Marangi
2022-07-19 13:36 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 02/15] net: dsa: qca8k: move mib struct to common code Christian Marangi
2022-07-19 12:36 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 03/15] net: dsa: qca8k: move qca8k read/write/rmw and reg table " Christian Marangi
2022-07-19 12:38 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 03/15] net: dsa: qca8k: move qca8kread/write/rmw " Christian Marangi
2022-07-19 1:00 ` Christian Marangi
2022-07-19 1:30 ` Jakub Kicinski
2022-07-19 1:16 ` Christian Marangi
2022-07-19 13:34 ` Vladimir Oltean
2022-07-19 1:32 ` Jakub Kicinski
2022-07-19 1:17 ` Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 04/15] net: dsa: qca8k: move qca8k bulk read/write helper " Christian Marangi
2022-07-19 12:40 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 05/15] net: dsa: qca8k: move fdb/vlan/mib init functions " Christian Marangi
2022-07-19 13:13 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 06/15] net: dsa: qca8k: move port set status/eee/ethtool stats function " Christian Marangi
2022-07-19 13:14 ` Vladimir Oltean
2022-07-19 13:16 ` Christian Marangi
2022-07-19 13:18 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 07/15] net: dsa: qca8k: move bridge functions " Christian Marangi
2022-07-19 13:16 ` Vladimir Oltean
2022-07-19 0:57 ` Christian Marangi [this message]
2022-07-19 13:22 ` [net-next PATCH v2 08/15] net: dsa: qca8k: move fast age/MTU/port enable/disable " Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 09/15] net: dsa: qca8k: move port FDB function " Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 10/15] net: dsa: qca8k: move port MDB functions " Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 11/15] net: dsa: qca8k: move port mirror " Christian Marangi
2022-07-19 13:24 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 12/15] net: dsa: qca8k: move port VLAN " Christian Marangi
2022-07-19 13:25 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 13/15] net: dsa: qca8k: move port LAG " Christian Marangi
2022-07-19 13:26 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 14/15] net: dsa: qca8k: move read_switch_id function " Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 15/15] net: dsa: qca8k: drop unnecessary exposed function and make them static Christian Marangi
2022-07-19 13:29 ` Vladimir Oltean
2022-07-19 13:35 ` Christian Marangi
2022-07-19 13:44 ` Vladimir Oltean
2022-07-19 13:47 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220719005726.8739-10-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox