From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jens Axboe <axboe@kernel.dk>,
Christian Marangi <ansuelsmth@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [net-next PATCH v2 11/15] net: dsa: qca8k: move port mirror functions to common code
Date: Tue, 19 Jul 2022 02:57:22 +0200 [thread overview]
Message-ID: <20220719005726.8739-13-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220719005726.8739-1-ansuelsmth@gmail.com>
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca/qca8k-8xxx.c | 93 ------------------------------
drivers/net/dsa/qca/qca8k-common.c | 93 ++++++++++++++++++++++++++++++
drivers/net/dsa/qca/qca8k.h | 7 +++
3 files changed, 100 insertions(+), 93 deletions(-)
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index 776c53aef5c4..d12ba61841b9 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1575,99 +1575,6 @@ qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
return ret;
}
-static int
-qca8k_port_mirror_add(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror,
- bool ingress, struct netlink_ext_ack *extack)
-{
- struct qca8k_priv *priv = ds->priv;
- int monitor_port, ret;
- u32 reg, val;
-
- /* Check for existent entry */
- if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
- return -EEXIST;
-
- ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
- if (ret)
- return ret;
-
- /* QCA83xx can have only one port set to mirror mode.
- * Check that the correct port is requested and return error otherwise.
- * When no mirror port is set, the values is set to 0xF
- */
- monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
- return -EEXIST;
-
- /* Set the monitor port */
- val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
- mirror->to_local_port);
- ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
- QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (ret)
- return ret;
-
- if (ingress) {
- reg = QCA8K_PORT_LOOKUP_CTRL(port);
- val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
- } else {
- reg = QCA8K_REG_PORT_HOL_CTRL1(port);
- val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
- }
-
- ret = regmap_update_bits(priv->regmap, reg, val, val);
- if (ret)
- return ret;
-
- /* Track mirror port for tx and rx to decide when the
- * mirror port has to be disabled.
- */
- if (ingress)
- priv->mirror_rx |= BIT(port);
- else
- priv->mirror_tx |= BIT(port);
-
- return 0;
-}
-
-static void
-qca8k_port_mirror_del(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror)
-{
- struct qca8k_priv *priv = ds->priv;
- u32 reg, val;
- int ret;
-
- if (mirror->ingress) {
- reg = QCA8K_PORT_LOOKUP_CTRL(port);
- val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
- } else {
- reg = QCA8K_REG_PORT_HOL_CTRL1(port);
- val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
- }
-
- ret = regmap_clear_bits(priv->regmap, reg, val);
- if (ret)
- goto err;
-
- if (mirror->ingress)
- priv->mirror_rx &= ~BIT(port);
- else
- priv->mirror_tx &= ~BIT(port);
-
- /* No port set to send packet to mirror port. Disable mirror port */
- if (!priv->mirror_rx && !priv->mirror_tx) {
- val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
- ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
- QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (ret)
- goto err;
- }
-err:
- dev_err(priv->dev, "Failed to del mirror port from %d", port);
-}
-
static int
qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index 796293738b35..2f3a1343b13c 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -898,3 +898,96 @@ qca8k_port_mdb_del(struct dsa_switch *ds, int port,
return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
}
+
+int
+qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int monitor_port, ret;
+ u32 reg, val;
+
+ /* Check for existent entry */
+ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
+ return -EEXIST;
+
+ ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ /* QCA83xx can have only one port set to mirror mode.
+ * Check that the correct port is requested and return error otherwise.
+ * When no mirror port is set, the values is set to 0xF
+ */
+ monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ /* Set the monitor port */
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
+ mirror->to_local_port);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ return ret;
+
+ if (ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_update_bits(priv->regmap, reg, val, val);
+ if (ret)
+ return ret;
+
+ /* Track mirror port for tx and rx to decide when the
+ * mirror port has to be disabled.
+ */
+ if (ingress)
+ priv->mirror_rx |= BIT(port);
+ else
+ priv->mirror_tx |= BIT(port);
+
+ return 0;
+}
+
+void
+qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg, val;
+ int ret;
+
+ if (mirror->ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, reg, val);
+ if (ret)
+ goto err;
+
+ if (mirror->ingress)
+ priv->mirror_rx &= ~BIT(port);
+ else
+ priv->mirror_tx &= ~BIT(port);
+
+ /* No port set to send packet to mirror port. Disable mirror port */
+ if (!priv->mirror_rx && !priv->mirror_tx) {
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ goto err;
+ }
+err:
+ dev_err(priv->dev, "Failed to del mirror port from %d", port);
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index 31f6f98960d6..c9c8ec7abdc2 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -502,4 +502,11 @@ int qca8k_port_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct dsa_db db);
+/* Common port mirror function */
+int qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack);
+void qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
+
#endif /* __QCA8K_H */
--
2.36.1
next prev parent reply other threads:[~2022-07-19 1:16 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-19 0:57 [net-next PATCH v2 00/15] net: dsa: qca8k: code split for qca8k Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 01/15] net: dsa: qca8k: make mib autocast feature optional Christian Marangi
2022-07-19 12:26 ` Vladimir Oltean
2022-07-19 12:29 ` Christian Marangi
2022-07-19 13:36 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 02/15] net: dsa: qca8k: move mib struct to common code Christian Marangi
2022-07-19 12:36 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 03/15] net: dsa: qca8k: move qca8k read/write/rmw and reg table " Christian Marangi
2022-07-19 12:38 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 03/15] net: dsa: qca8k: move qca8kread/write/rmw " Christian Marangi
2022-07-19 1:00 ` Christian Marangi
2022-07-19 1:30 ` Jakub Kicinski
2022-07-19 1:16 ` Christian Marangi
2022-07-19 13:34 ` Vladimir Oltean
2022-07-19 1:32 ` Jakub Kicinski
2022-07-19 1:17 ` Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 04/15] net: dsa: qca8k: move qca8k bulk read/write helper " Christian Marangi
2022-07-19 12:40 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 05/15] net: dsa: qca8k: move fdb/vlan/mib init functions " Christian Marangi
2022-07-19 13:13 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 06/15] net: dsa: qca8k: move port set status/eee/ethtool stats function " Christian Marangi
2022-07-19 13:14 ` Vladimir Oltean
2022-07-19 13:16 ` Christian Marangi
2022-07-19 13:18 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 07/15] net: dsa: qca8k: move bridge functions " Christian Marangi
2022-07-19 13:16 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 08/15] net: dsa: qca8k: move fast age/MTU/port enable/disable " Christian Marangi
2022-07-19 13:22 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 09/15] net: dsa: qca8k: move port FDB function " Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 10/15] net: dsa: qca8k: move port MDB functions " Christian Marangi
2022-07-19 0:57 ` Christian Marangi [this message]
2022-07-19 13:24 ` [net-next PATCH v2 11/15] net: dsa: qca8k: move port mirror " Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 12/15] net: dsa: qca8k: move port VLAN " Christian Marangi
2022-07-19 13:25 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 13/15] net: dsa: qca8k: move port LAG " Christian Marangi
2022-07-19 13:26 ` Vladimir Oltean
2022-07-19 0:57 ` [net-next PATCH v2 14/15] net: dsa: qca8k: move read_switch_id function " Christian Marangi
2022-07-19 0:57 ` [net-next PATCH v2 15/15] net: dsa: qca8k: drop unnecessary exposed function and make them static Christian Marangi
2022-07-19 13:29 ` Vladimir Oltean
2022-07-19 13:35 ` Christian Marangi
2022-07-19 13:44 ` Vladimir Oltean
2022-07-19 13:47 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220719005726.8739-13-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox