* [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params
@ 2022-10-12 20:47 Osama Muhammad
2022-10-12 21:01 ` Samuel Thibault
0 siblings, 1 reply; 5+ messages in thread
From: Osama Muhammad @ 2022-10-12 20:47 UTC (permalink / raw)
To: samuel.thibault; +Cc: gregkh, speakup, linux-kernel, Osama Muhammad
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding a default variables to the speakup_soft module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
---
drivers/accessibility/speakup/speakup_soft.c | 34 +++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/accessibility/speakup/speakup_soft.c b/drivers/accessibility/speakup/speakup_soft.c
index 28c8f60370cf..fd65dd40616e 100644
--- a/drivers/accessibility/speakup/speakup_soft.c
+++ b/drivers/accessibility/speakup/speakup_soft.c
@@ -33,6 +33,15 @@ static struct miscdevice synth_device, synthu_device;
static int init_pos;
static int misc_registered;
+
+enum default_vars_id {
+ DIRECT_ID = 0, CAPS_START_ID, CAPS_STOP_ID,
+ PAUSE_ID, RATE_ID, PITCH_ID, INFLECTION_ID,
+ VOL_ID, TONE_ID, PUNCT_ID, VOICE_ID,
+ FREQUENCY_ID,
+};
+
+
static struct var_t vars[] = {
/* DIRECT is put first so that module_param_named can access it easily */
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
@@ -451,10 +460,33 @@ static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var)
}
module_param_named(start, synth_soft.startup, short, 0444);
-module_param_named(direct, vars[0].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+module_param_named(caps_start, vars[CAPS_START_ID].u.s.default_val, charp, 0444);
+module_param_named(caps_stop, vars[CAPS_STOP_ID].u.s.default_val, charp, 0444);
+module_param_named(pause, vars[PAUSE_ID].u.n.default_val, int, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(inflection, vars[INFLECTION_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
+module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
+module_param_named(frequency, vars[FREQUENCY_ID].u.n.default_val, int, 0444);
+
+
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+MODULE_PARM_DESC(caps_start, "Set the caps_start variable on load.");
+MODULE_PARM_DESC(caps_stop, "Set the caps_stop variable on load.");
+MODULE_PARM_DESC(rate, "Sets the rate of the synthesizer.");
+MODULE_PARM_DESC(pitch, "Sets the pitch of the synthesizer.");
+MODULE_PARM_DESC(inflection, "Sets the inflection of the synthesizer.");
+MODULE_PARM_DESC(vol, "Sets the volume of the speech synthesizer.");
+MODULE_PARM_DESC(tone, "Sets the tone of the speech synthesizer.");
+MODULE_PARM_DESC(punct, "Sets the amount of punctuation spoken by the synthesizer.");
+MODULE_PARM_DESC(voice, "Sets the voice used by the synthesizer.");
+MODULE_PARM_DESC(frequency, "Sets the frequency of speech synthesizer.");
module_spk_synth(synth_soft);
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params
2022-10-12 20:47 Osama Muhammad
@ 2022-10-12 21:01 ` Samuel Thibault
0 siblings, 0 replies; 5+ messages in thread
From: Samuel Thibault @ 2022-10-12 21:01 UTC (permalink / raw)
To: Osama Muhammad; +Cc: gregkh, speakup, linux-kernel
Hello,
Osama Muhammad, le jeu. 13 oct. 2022 01:47:23 +0500, a ecrit:
> +enum default_vars_id {
> + DIRECT_ID = 0, CAPS_START_ID, CAPS_STOP_ID,
> + PAUSE_ID, RATE_ID, PITCH_ID, INFLECTION_ID,
> + VOL_ID, TONE_ID, PUNCT_ID, VOICE_ID,
> + FREQUENCY_ID,
> +};
> +
> +
> static struct var_t vars[] = {
> /* DIRECT is put first so that module_param_named can access it easily */
> { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> @@ -451,10 +460,33 @@ static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var)
We need to make sure that the entries in vars are in the same order, so
use
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
etc. to make sure that the indexes are correct. Also add NB_ID as last
member of the enum, and use it for the "vars" array length, so we're
sure we're not missing anything.
> module_param_named(start, synth_soft.startup, short, 0444);
> -module_param_named(direct, vars[0].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
> +module_param_named(caps_start, vars[CAPS_START_ID].u.s.default_val, charp, 0444);
> +module_param_named(caps_stop, vars[CAPS_STOP_ID].u.s.default_val, charp, 0444);
> +module_param_named(pause, vars[PAUSE_ID].u.n.default_val, int, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(inflection, vars[INFLECTION_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
> +module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
> +module_param_named(frequency, vars[FREQUENCY_ID].u.n.default_val, int, 0444);
Not all vars make sense as parameters: caps_start, caps_stop and pause
are not actually tunable, so don't add a parameter for them.
Samuel
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params
@ 2022-10-18 20:33 Osama Muhammad
2022-10-18 21:30 ` Samuel Thibault
0 siblings, 1 reply; 5+ messages in thread
From: Osama Muhammad @ 2022-10-18 20:33 UTC (permalink / raw)
To: samuel.thibault; +Cc: gregkh, speakup, linux-kernel, Osama Muhammad
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_acntpc.c and speakup_acntsa.c
module allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
---
.../accessibility/speakup/speakup_acntpc.c | 38 +++++++++++++++----
.../accessibility/speakup/speakup_acntsa.c | 37 ++++++++++++++----
2 files changed, 59 insertions(+), 16 deletions(-)
diff --git a/drivers/accessibility/speakup/speakup_acntpc.c b/drivers/accessibility/speakup/speakup_acntpc.c
index a55b60754eb1..a27e6bbf05da 100644
--- a/drivers/accessibility/speakup/speakup_acntpc.c
+++ b/drivers/accessibility/speakup/speakup_acntpc.c
@@ -34,14 +34,23 @@ static int synth_port_control;
static int port_forced;
static unsigned int synth_portlist[] = { 0x2a8, 0 };
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_acntpc.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
+
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntpc);
diff --git a/drivers/accessibility/speakup/speakup_acntsa.c b/drivers/accessibility/speakup/speakup_acntsa.c
index 2697c51ed6b5..26bb9f9399d3 100644
--- a/drivers/accessibility/speakup/speakup_acntsa.c
+++ b/drivers/accessibility/speakup/speakup_acntsa.c
@@ -19,14 +19,24 @@
static int synth_probe(struct spk_synth *synth);
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_acntsa.ser, int, 0444);
module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
module_param_named(start, synth_acntsa.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntsa);
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params
2022-10-18 20:33 [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params Osama Muhammad
@ 2022-10-18 21:30 ` Samuel Thibault
0 siblings, 0 replies; 5+ messages in thread
From: Samuel Thibault @ 2022-10-18 21:30 UTC (permalink / raw)
To: Osama Muhammad; +Cc: gregkh, speakup, linux-kernel
Osama Muhammad, le mer. 19 oct. 2022 01:33:08 +0500, a ecrit:
> This is an enhancement which allows to specify the default driver
> parameters among the module parameters.
>
> Adding default variables to the speakup_acntpc.c and speakup_acntsa.c
> module allows to easily set that at boot, rather than
> setting the sys variables after boot.
> More details can be found here:
> https://github.com/linux-speakup/speakup/issues/7
>
> Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
> ---
> .../accessibility/speakup/speakup_acntpc.c | 38 +++++++++++++++----
> .../accessibility/speakup/speakup_acntsa.c | 37 ++++++++++++++----
> 2 files changed, 59 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/accessibility/speakup/speakup_acntpc.c b/drivers/accessibility/speakup/speakup_acntpc.c
> index a55b60754eb1..a27e6bbf05da 100644
> --- a/drivers/accessibility/speakup/speakup_acntpc.c
> +++ b/drivers/accessibility/speakup/speakup_acntpc.c
> @@ -34,14 +34,23 @@ static int synth_port_control;
> static int port_forced;
> static unsigned int synth_portlist[] = { 0x2a8, 0 };
>
> -static struct var_t vars[] = {
> - { CAPS_START, .u.s = {"\033P8" } },
> - { CAPS_STOP, .u.s = {"\033P5" } },
> - { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> - { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> - { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
> - { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> - { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> +enum default_vars_id {
> + CAPS_START_ID = 0, CAPS_STOP_ID,
> + RATE_ID, PITCH_ID,
> + VOL_ID, TONE_ID,
> + DIRECT_ID, V_LAST_VAR_ID,
> + NB_ID
> +};
> +
> +
> +static struct var_t vars[NB_ID] = {
> + [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
> + [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
> + [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> + [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> + [VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
> + [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> + [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> V_LAST_VAR
> };
>
> @@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
>
> module_param_hw_named(port, port_forced, int, ioport, 0444);
> module_param_named(start, synth_acntpc.startup, short, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
> +
> +
>
> MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
> MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
> +MODULE_PARM_DESC(rate, "Set the rate variable on load.");
> +MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
> +MODULE_PARM_DESC(vol, "Set the vol variable on load.");
> +MODULE_PARM_DESC(tone, "Set the tone variable on load.");
> +MODULE_PARM_DESC(direct, "Set the direct variable on load.");
> +
>
> module_spk_synth(synth_acntpc);
>
> diff --git a/drivers/accessibility/speakup/speakup_acntsa.c b/drivers/accessibility/speakup/speakup_acntsa.c
> index 2697c51ed6b5..26bb9f9399d3 100644
> --- a/drivers/accessibility/speakup/speakup_acntsa.c
> +++ b/drivers/accessibility/speakup/speakup_acntsa.c
> @@ -19,14 +19,24 @@
>
> static int synth_probe(struct spk_synth *synth);
>
> -static struct var_t vars[] = {
> - { CAPS_START, .u.s = {"\033P8" } },
> - { CAPS_STOP, .u.s = {"\033P5" } },
> - { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> - { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> - { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
> - { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> - { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> +
> +enum default_vars_id {
> + CAPS_START_ID = 0, CAPS_STOP_ID,
> + RATE_ID, PITCH_ID,
> + VOL_ID, TONE_ID,
> + DIRECT_ID, V_LAST_VAR_ID,
> + NB_ID
> +};
> +
> +
> +static struct var_t vars[NB_ID] = {
> + [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
> + [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
> + [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> + [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> + [VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
> + [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> + [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> V_LAST_VAR
> };
>
> @@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
> module_param_named(ser, synth_acntsa.ser, int, 0444);
> module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
> module_param_named(start, synth_acntsa.startup, short, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
>
> MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
> MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
> MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
> +MODULE_PARM_DESC(rate, "Set the rate variable on load.");
> +MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
> +MODULE_PARM_DESC(vol, "Set the vol variable on load.");
> +MODULE_PARM_DESC(tone, "Set the tone variable on load.");
> +MODULE_PARM_DESC(direct, "Set the direct variable on load.");
> +
>
> module_spk_synth(synth_acntsa);
>
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params
@ 2022-10-22 16:14 Osama Muhammad
0 siblings, 0 replies; 5+ messages in thread
From: Osama Muhammad @ 2022-10-22 16:14 UTC (permalink / raw)
To: gregkh; +Cc: linux-kernel, Osama Muhammad, Samuel Thibault
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_acntpc.c and speakup_acntsa.c
module allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
---
.../accessibility/speakup/speakup_acntpc.c | 38 +++++++++++++++----
.../accessibility/speakup/speakup_acntsa.c | 37 ++++++++++++++----
2 files changed, 59 insertions(+), 16 deletions(-)
diff --git a/drivers/accessibility/speakup/speakup_acntpc.c b/drivers/accessibility/speakup/speakup_acntpc.c
index a55b60754eb1..a27e6bbf05da 100644
--- a/drivers/accessibility/speakup/speakup_acntpc.c
+++ b/drivers/accessibility/speakup/speakup_acntpc.c
@@ -34,14 +34,23 @@ static int synth_port_control;
static int port_forced;
static unsigned int synth_portlist[] = { 0x2a8, 0 };
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_acntpc.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
+
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntpc);
diff --git a/drivers/accessibility/speakup/speakup_acntsa.c b/drivers/accessibility/speakup/speakup_acntsa.c
index 2697c51ed6b5..26bb9f9399d3 100644
--- a/drivers/accessibility/speakup/speakup_acntsa.c
+++ b/drivers/accessibility/speakup/speakup_acntsa.c
@@ -19,14 +19,24 @@
static int synth_probe(struct spk_synth *synth);
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_acntsa.ser, int, 0444);
module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
module_param_named(start, synth_acntsa.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntsa);
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-22 16:14 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-10-18 20:33 [PATCH] Accessiblity: speakup: specifying the default driver parameters among the module params Osama Muhammad
2022-10-18 21:30 ` Samuel Thibault
-- strict thread matches above, loose matches on Subject: below --
2022-10-22 16:14 Osama Muhammad
2022-10-12 20:47 Osama Muhammad
2022-10-12 21:01 ` Samuel Thibault
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox