public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Li RongQing <lirongqing@baidu.com>,
	Greg Edwards <gedwards@ddn.com>
Subject: [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes
Date: Fri,  6 Jan 2023 01:12:51 +0000	[thread overview]
Message-ID: <20230106011306.85230-19-seanjc@google.com> (raw)
In-Reply-To: <20230106011306.85230-1-seanjc@google.com>

Track all possibilities for the optimized APIC map's logical modes
instead of overloading the pseudo-bitmap and treating any "unknown" value
as "invalid".

As documented by the now-stale comment above the mode values, the values
did have meaning when the optimized map was originally added.  That
dependent logical was removed by commit e45115b62f9a ("KVM: x86: use
physical LAPIC array for logical x2APIC"), but the obfuscated behavior
and its comment were left behind.

Opportunistically rename "mode" to "logical_mode", partly to make it
clear that the "disabled" case applies only to the logical map, but also
to prove that there is no lurking code that expects "mode" to be a bitmap.

Functionally, this is a glorified nop.

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/include/asm/kvm_host.h | 29 ++++++++++++++++--------
 arch/x86/kvm/lapic.c            | 40 ++++++++++++++++++++++++++-------
 2 files changed, 52 insertions(+), 17 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1d92c148e799..732421a0ad02 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1022,19 +1022,30 @@ struct kvm_arch_memory_slot {
 };
 
 /*
- * We use as the mode the number of bits allocated in the LDR for the
- * logical processor ID.  It happens that these are all powers of two.
- * This makes it is very easy to detect cases where the APICs are
- * configured for multiple modes; in that case, we cannot use the map and
- * hence cannot use kvm_irq_delivery_to_apic_fast either.
+ * Track the mode of the optimized logical map, as the rules for decoding the
+ * destination vary per mode.  Enabling the optimized logical map requires all
+ * software-enabled local APIs to be in the same mode, each addressable APIC to
+ * be mapped to only one MDA, and each MDA to map to at most one APIC.
  */
-#define KVM_APIC_MODE_XAPIC_CLUSTER          4
-#define KVM_APIC_MODE_XAPIC_FLAT             8
-#define KVM_APIC_MODE_X2APIC                16
+enum kvm_apic_logical_mode {
+	/* All local APICs are software disabled. */
+	KVM_APIC_MODE_SW_DISABLED,
+	/* All software enabled local APICs in xAPIC cluster addressing mode. */
+	KVM_APIC_MODE_XAPIC_CLUSTER,
+	/* All software enabled local APICs in xAPIC flat addressing mode. */
+	KVM_APIC_MODE_XAPIC_FLAT,
+	/* All software enabled local APICs in x2APIC mode. */
+	KVM_APIC_MODE_X2APIC,
+	/*
+	 * Optimized map disabled, e.g. not all local APICs in the same logical
+	 * mode, same logical ID assigned to multiple APICs, etc.
+	 */
+	KVM_APIC_MODE_MAP_DISABLED,
+};
 
 struct kvm_apic_map {
 	struct rcu_head rcu;
-	u8 mode;
+	enum kvm_apic_logical_mode logical_mode;
 	u32 max_apic_id;
 	union {
 		struct kvm_lapic *xapic_flat_map[8];
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2aee712e42bb..2567998b692c 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -168,7 +168,12 @@ static bool kvm_use_posted_timer_interrupt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		u32 dest_id, struct kvm_lapic ***cluster, u16 *mask) {
-	switch (map->mode) {
+	switch (map->logical_mode) {
+	case KVM_APIC_MODE_SW_DISABLED:
+		/* Arbitrarily use the flat map so that @cluster isn't NULL. */
+		*cluster = map->xapic_flat_map;
+		*mask = 0;
+		return true;
 	case KVM_APIC_MODE_X2APIC: {
 		u32 offset = (dest_id >> 16) * 16;
 		u32 max_apic_id = map->max_apic_id;
@@ -193,8 +198,10 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		*cluster = map->xapic_cluster_map[(dest_id >> 4) & 0xf];
 		*mask = dest_id & 0xf;
 		return true;
+	case KVM_APIC_MODE_MAP_DISABLED:
+		return false;
 	default:
-		/* Not optimized. */
+		WARN_ON_ONCE(1);
 		return false;
 	}
 }
@@ -256,10 +263,12 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 		goto out;
 
 	new->max_apic_id = max_id;
+	new->logical_mode = KVM_APIC_MODE_SW_DISABLED;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		struct kvm_lapic *apic = vcpu->arch.apic;
 		struct kvm_lapic **cluster;
+		enum kvm_apic_logical_mode logical_mode;
 		u16 mask;
 		u32 ldr;
 		u8 xapic_id;
@@ -282,7 +291,8 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 		if (!apic_x2apic_mode(apic) && !new->phys_map[xapic_id])
 			new->phys_map[xapic_id] = apic;
 
-		if (!kvm_apic_sw_enabled(apic))
+		if (new->logical_mode == KVM_APIC_MODE_MAP_DISABLED ||
+		    !kvm_apic_sw_enabled(apic))
 			continue;
 
 		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
@@ -290,17 +300,31 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 			continue;
 
 		if (apic_x2apic_mode(apic)) {
-			new->mode |= KVM_APIC_MODE_X2APIC;
+			logical_mode = KVM_APIC_MODE_X2APIC;
 		} else {
 			ldr = GET_APIC_LOGICAL_ID(ldr);
 			if (kvm_lapic_get_reg(apic, APIC_DFR) == APIC_DFR_FLAT)
-				new->mode |= KVM_APIC_MODE_XAPIC_FLAT;
+				logical_mode = KVM_APIC_MODE_XAPIC_FLAT;
 			else
-				new->mode |= KVM_APIC_MODE_XAPIC_CLUSTER;
+				logical_mode = KVM_APIC_MODE_XAPIC_CLUSTER;
 		}
 
-		if (!kvm_apic_map_get_logical_dest(new, ldr, &cluster, &mask))
+		/*
+		 * To optimize logical mode delivery, all software-enabled APICs must
+		 * be configured for the same mode.
+		 */
+		if (new->logical_mode == KVM_APIC_MODE_SW_DISABLED) {
+			new->logical_mode = logical_mode;
+		} else if (new->logical_mode != logical_mode) {
+			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
 			continue;
+		}
+
+		if (WARN_ON_ONCE(!kvm_apic_map_get_logical_dest(new, ldr,
+								&cluster, &mask))) {
+			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
+			continue;
+		}
 
 		if (mask)
 			cluster[ffs(mask) - 1] = apic;
@@ -953,7 +977,7 @@ static bool kvm_apic_is_broadcast_dest(struct kvm *kvm, struct kvm_lapic **src,
 {
 	if (kvm->arch.x2apic_broadcast_quirk_disabled) {
 		if ((irq->dest_id == APIC_BROADCAST &&
-				map->mode != KVM_APIC_MODE_X2APIC))
+		     map->logical_mode != KVM_APIC_MODE_X2APIC))
 			return true;
 		if (irq->dest_id == X2APIC_BROADCAST)
 			return true;
-- 
2.39.0.314.g84b9a713c41-goog


  parent reply	other threads:[~2023-01-06  1:15 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06  1:12 [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 01/33] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 02/33] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 03/33] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2023-01-08 14:25   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 04/33] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 05/33] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 06/33] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 07/33] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 08/33] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 09/33] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 10/33] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2023-01-08 14:30   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 11/33] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 12/33] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 13/33] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 14/33] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 15/33] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 16/33] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 17/33] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2023-01-06  1:12 ` Sean Christopherson [this message]
2023-01-08 15:14   ` [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 19/33] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 20/33] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 21/33] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 22/33] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 23/33] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 24/33] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 25/33] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 26/33] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 27/33] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2023-01-08 15:20   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 28/33] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 29/33] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 30/33] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 31/33] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 32/33] KVM: x86: Allow APICv APIC ID inhibit to be cleared Sean Christopherson
2023-01-08 15:25   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 33/33] KVM: x86: Add helpers to recalc physical vs. logical optimized APIC maps Sean Christopherson
2023-01-08 15:32   ` Maxim Levitsky
2023-02-15 20:25 ` [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Suthikulpanit, Suravee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230106011306.85230-19-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=gedwards@ddn.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox