From: Maxim Levitsky <mlevitsk@redhat.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Li RongQing <lirongqing@baidu.com>,
Greg Edwards <gedwards@ddn.com>
Subject: Re: [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes
Date: Sun, 08 Jan 2023 17:14:19 +0200 [thread overview]
Message-ID: <b7f42f539bbaf7cc03b748d60a796078bb01c3f8.camel@redhat.com> (raw)
In-Reply-To: <20230106011306.85230-19-seanjc@google.com>
On Fri, 2023-01-06 at 01:12 +0000, Sean Christopherson wrote:
> Track all possibilities for the optimized APIC map's logical modes
> instead of overloading the pseudo-bitmap and treating any "unknown" value
> as "invalid".
>
> As documented by the now-stale comment above the mode values, the values
> did have meaning when the optimized map was originally added. That
> dependent logical was removed by commit e45115b62f9a ("KVM: x86: use
> physical LAPIC array for logical x2APIC"), but the obfuscated behavior
> and its comment were left behind.
>
> Opportunistically rename "mode" to "logical_mode", partly to make it
> clear that the "disabled" case applies only to the logical map, but also
> to prove that there is no lurking code that expects "mode" to be a bitmap.
>
> Functionally, this is a glorified nop.
>
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> ---
> arch/x86/include/asm/kvm_host.h | 29 ++++++++++++++++--------
> arch/x86/kvm/lapic.c | 40 ++++++++++++++++++++++++++-------
> 2 files changed, 52 insertions(+), 17 deletions(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 1d92c148e799..732421a0ad02 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1022,19 +1022,30 @@ struct kvm_arch_memory_slot {
> };
>
> /*
> - * We use as the mode the number of bits allocated in the LDR for the
> - * logical processor ID. It happens that these are all powers of two.
> - * This makes it is very easy to detect cases where the APICs are
> - * configured for multiple modes; in that case, we cannot use the map and
> - * hence cannot use kvm_irq_delivery_to_apic_fast either.
> + * Track the mode of the optimized logical map, as the rules for decoding the
> + * destination vary per mode. Enabling the optimized logical map requires all
> + * software-enabled local APIs to be in the same mode, each addressable APIC to
> + * be mapped to only one MDA, and each MDA to map to at most one APIC.
> */
> -#define KVM_APIC_MODE_XAPIC_CLUSTER 4
> -#define KVM_APIC_MODE_XAPIC_FLAT 8
> -#define KVM_APIC_MODE_X2APIC 16
> +enum kvm_apic_logical_mode {
> + /* All local APICs are software disabled. */
> + KVM_APIC_MODE_SW_DISABLED,
> + /* All software enabled local APICs in xAPIC cluster addressing mode. */
> + KVM_APIC_MODE_XAPIC_CLUSTER,
> + /* All software enabled local APICs in xAPIC flat addressing mode. */
> + KVM_APIC_MODE_XAPIC_FLAT,
> + /* All software enabled local APICs in x2APIC mode. */
> + KVM_APIC_MODE_X2APIC,
> + /*
> + * Optimized map disabled, e.g. not all local APICs in the same logical
> + * mode, same logical ID assigned to multiple APICs, etc.
> + */
> + KVM_APIC_MODE_MAP_DISABLED,
> +};
>
> struct kvm_apic_map {
> struct rcu_head rcu;
> - u8 mode;
> + enum kvm_apic_logical_mode logical_mode;
> u32 max_apic_id;
> union {
> struct kvm_lapic *xapic_flat_map[8];
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 2aee712e42bb..2567998b692c 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -168,7 +168,12 @@ static bool kvm_use_posted_timer_interrupt(struct kvm_vcpu *vcpu)
>
> static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
> u32 dest_id, struct kvm_lapic ***cluster, u16 *mask) {
> - switch (map->mode) {
> + switch (map->logical_mode) {
> + case KVM_APIC_MODE_SW_DISABLED:
> + /* Arbitrarily use the flat map so that @cluster isn't NULL. */
> + *cluster = map->xapic_flat_map;
> + *mask = 0;
> + return true;
> case KVM_APIC_MODE_X2APIC: {
> u32 offset = (dest_id >> 16) * 16;
> u32 max_apic_id = map->max_apic_id;
> @@ -193,8 +198,10 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
> *cluster = map->xapic_cluster_map[(dest_id >> 4) & 0xf];
> *mask = dest_id & 0xf;
> return true;
> + case KVM_APIC_MODE_MAP_DISABLED:
> + return false;
> default:
> - /* Not optimized. */
> + WARN_ON_ONCE(1);
> return false;
> }
> }
> @@ -256,10 +263,12 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
> goto out;
>
> new->max_apic_id = max_id;
> + new->logical_mode = KVM_APIC_MODE_SW_DISABLED;
>
> kvm_for_each_vcpu(i, vcpu, kvm) {
> struct kvm_lapic *apic = vcpu->arch.apic;
> struct kvm_lapic **cluster;
> + enum kvm_apic_logical_mode logical_mode;
> u16 mask;
> u32 ldr;
> u8 xapic_id;
> @@ -282,7 +291,8 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
> if (!apic_x2apic_mode(apic) && !new->phys_map[xapic_id])
> new->phys_map[xapic_id] = apic;
>
> - if (!kvm_apic_sw_enabled(apic))
> + if (new->logical_mode == KVM_APIC_MODE_MAP_DISABLED ||
> + !kvm_apic_sw_enabled(apic))
> continue;
>
> ldr = kvm_lapic_get_reg(apic, APIC_LDR);
> @@ -290,17 +300,31 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
> continue;
>
> if (apic_x2apic_mode(apic)) {
> - new->mode |= KVM_APIC_MODE_X2APIC;
> + logical_mode = KVM_APIC_MODE_X2APIC;
> } else {
> ldr = GET_APIC_LOGICAL_ID(ldr);
> if (kvm_lapic_get_reg(apic, APIC_DFR) == APIC_DFR_FLAT)
> - new->mode |= KVM_APIC_MODE_XAPIC_FLAT;
> + logical_mode = KVM_APIC_MODE_XAPIC_FLAT;
> else
> - new->mode |= KVM_APIC_MODE_XAPIC_CLUSTER;
> + logical_mode = KVM_APIC_MODE_XAPIC_CLUSTER;
> }
>
> - if (!kvm_apic_map_get_logical_dest(new, ldr, &cluster, &mask))
> + /*
> + * To optimize logical mode delivery, all software-enabled APICs must
> + * be configured for the same mode.
> + */
> + if (new->logical_mode == KVM_APIC_MODE_SW_DISABLED) {
> + new->logical_mode = logical_mode;
> + } else if (new->logical_mode != logical_mode) {
> + new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
> continue;
> + }
> +
> + if (WARN_ON_ONCE(!kvm_apic_map_get_logical_dest(new, ldr,
> + &cluster, &mask))) {
> + new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
> + continue;
> + }
>
> if (mask)
> cluster[ffs(mask) - 1] = apic;
> @@ -953,7 +977,7 @@ static bool kvm_apic_is_broadcast_dest(struct kvm *kvm, struct kvm_lapic **src,
> {
> if (kvm->arch.x2apic_broadcast_quirk_disabled) {
> if ((irq->dest_id == APIC_BROADCAST &&
> - map->mode != KVM_APIC_MODE_X2APIC))
> + map->logical_mode != KVM_APIC_MODE_X2APIC))
> return true;
> if (irq->dest_id == X2APIC_BROADCAST)
> return true;
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Best regards,
Maxim Levitsky
next prev parent reply other threads:[~2023-01-08 15:15 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-06 1:12 [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 01/33] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 02/33] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 03/33] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2023-01-08 14:25 ` Maxim Levitsky
2023-01-06 1:12 ` [PATCH v5 04/33] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 05/33] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 06/33] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 07/33] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 08/33] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 09/33] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 10/33] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2023-01-08 14:30 ` Maxim Levitsky
2023-01-06 1:12 ` [PATCH v5 11/33] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 12/33] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 13/33] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 14/33] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 15/33] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 16/33] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 17/33] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2023-01-08 15:14 ` Maxim Levitsky [this message]
2023-01-06 1:12 ` [PATCH v5 19/33] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 20/33] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 21/33] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 22/33] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 23/33] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 24/33] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 25/33] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2023-01-06 1:12 ` [PATCH v5 26/33] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2023-01-06 1:13 ` [PATCH v5 27/33] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2023-01-08 15:20 ` Maxim Levitsky
2023-01-06 1:13 ` [PATCH v5 28/33] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2023-01-06 1:13 ` [PATCH v5 29/33] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2023-01-06 1:13 ` [PATCH v5 30/33] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2023-01-06 1:13 ` [PATCH v5 31/33] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2023-01-06 1:13 ` [PATCH v5 32/33] KVM: x86: Allow APICv APIC ID inhibit to be cleared Sean Christopherson
2023-01-08 15:25 ` Maxim Levitsky
2023-01-06 1:13 ` [PATCH v5 33/33] KVM: x86: Add helpers to recalc physical vs. logical optimized APIC maps Sean Christopherson
2023-01-08 15:32 ` Maxim Levitsky
2023-02-15 20:25 ` [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Suthikulpanit, Suravee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7f42f539bbaf7cc03b748d60a796078bb01c3f8.camel@redhat.com \
--to=mlevitsk@redhat.com \
--cc=alejandro.j.jimenez@oracle.com \
--cc=gedwards@ddn.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lirongqing@baidu.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox