[PATCH v12 0/4] Add support for Maxim MAX735x/MAX736x variants

[PATCH v12 0/4] Add support for Maxim MAX735x/MAX736x variants

[Patrick Rudolph]

v12:
- Add separate patch correcting interrupt support in dt-binding
- Fix typo in commit message
- Make vdd-supply non optional

v11:
- Fix dt-binding example

v10:
- Small updates to dt-bindings
- Make vdd-supply optional
- Drop MAX7357 enhanced mode configuration

v9:
- Fix 'then' not aligned with 'if' in dt-bindings
- Split enhanced mode configuration into separate patch
- Add MAX7357/MAX7358 register definitions
- Rename config register defines
- Update comments and explain non default config being applied on MAX7357
- Check for I2C_FUNC_SMBUS_WRITE_BYTE_DATA functionality

v8:
- Move allOf in dt-binding and use double negation

v7:
- Reworked the commit message, comments and renamed a struct
  field. No functional change.

v6:
- Fix typo in dt-bindings

v5:
- Remove optional and make vdd-supply mandatory

v4:
- Add missing maxitems dt-bindings property

v3:
- Merge dt-bindings into i2c-mux-pca954x.yaml

v2:
- Move dt-bindings to separate file
- Added support for MAX736x as they are very similar
- Fixed an issue found by kernel test robot
- Dropped max735x property and custom IRQ check
- Added MAX7357 config register defines instead of magic values
- Renamed vcc-supply to vdd-supply

Patrick Rudolph (4):
  dt-bindings: i2c: Correct interrupt support
  dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  i2c: muxes: pca954x: Add MAX735x/MAX736x support
  i2c: muxes: pca954x: Add regulator support

 .../bindings/i2c/i2c-mux-pca954x.yaml         | 45 ++++++++--
 drivers/i2c/muxes/Kconfig                     |  6 +-
 drivers/i2c/muxes/i2c-mux-pca954x.c           | 89 +++++++++++++++++--
 3 files changed, 125 insertions(+), 15 deletions(-)

-- 
2.39.2

[PATCH v12 1/4] dt-bindings: i2c: Correct interrupt support

[Patrick Rudolph]

Only some of the PCA954x compatible ICs have interrupt
capability, but the binding advertises it on all ICs.

Sync the dt-binding with the driver and only advertise it on:
 - nxp,pca9542
 - nxp,pca9543
 - nxp,pca9544
 - nxp,pca9545

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 .../bindings/i2c/i2c-mux-pca954x.yaml         | 20 ++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 9f1726d0356b..93ffa67d0d9c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -63,6 +63,24 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nxp,pca9542
+                - nxp,pca9543
+                - nxp,pca9544
+                - nxp,pca9545
+    then:
+      properties:
+        interrupts: false
+        "#interrupt-cells": false
+        interrupt-controller: false
+
 unevaluatedProperties: false
 
 examples:
@@ -74,7 +92,7 @@ examples:
         #size-cells = <0>;
 
         i2c-mux@74 {
-            compatible = "nxp,pca9548";
+            compatible = "nxp,pca9545";
             #address-cells = <1>;
             #size-cells = <0>;
             reg = <0x74>;
-- 
2.39.2

Re: [PATCH v12 1/4] dt-bindings: i2c: Correct interrupt support

[Rob Herring]

On Mon, 17 Apr 2023 12:47:57 +0200, Patrick Rudolph wrote:
> Only some of the PCA954x compatible ICs have interrupt
> capability, but the binding advertises it on all ICs.
> 
> Sync the dt-binding with the driver and only advertise it on:
>  - nxp,pca9542
>  - nxp,pca9543
>  - nxp,pca9544
>  - nxp,pca9545
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> ---
>  .../bindings/i2c/i2c-mux-pca954x.yaml         | 20 ++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml:66:1: [error] duplication of key "allOf" in mapping (key-duplicates)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.example.dts'
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml:66:1: found duplicate key "allOf" with value "[]" (original value: "[]")
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml:66:1: found duplicate key "allOf" with value "[]" (original value: "[]")
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230417104801.808972-2-patrick.rudolph@9elements.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v12 1/4] dt-bindings: i2c: Correct interrupt support

[Krzysztof Kozlowski]

On 17/04/2023 12:47, Patrick Rudolph wrote:
> Only some of the PCA954x compatible ICs have interrupt
> capability, but the binding advertises it on all ICs.

Subject: Add proper prefix for the device. You are not correcting
interrupt support in all I2C controllers.

> 
> Sync the dt-binding with the driver and only advertise it on:
>  - nxp,pca9542
>  - nxp,pca9543
>  - nxp,pca9544
>  - nxp,pca9545
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> ---
>  .../bindings/i2c/i2c-mux-pca954x.yaml         | 20 ++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> index 9f1726d0356b..93ffa67d0d9c 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> @@ -63,6 +63,24 @@ required:
>    - compatible
>    - reg
>  
> +allOf:
> +  - $ref: /schemas/i2c/i2c-mux.yaml#

Duplicated part.

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof

[PATCH v12 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants

[Patrick Rudolph]

Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
chips. The functionality will be provided by the existing pca954x driver.

For chips that are powered off by default add a regulator called vdd-supply.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 .../bindings/i2c/i2c-mux-pca954x.yaml         | 25 +++++++++++++++----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 93ffa67d0d9c..6fed6eae9c9b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -4,21 +4,29 @@
 $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PCA954x I2C bus switch
+title: NXP PCA954x I2C and compatible bus switches
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 description:
-  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
-
-allOf:
-  - $ref: /schemas/i2c/i2c-mux.yaml#
+  The NXP PCA954x and compatible devices are I2C bus
+  multiplexer/switches that share the same functionality
+  and register layout.
+  The devices usually have 4 or 8 child buses, which are
+  attached to the parent bus by using the SMBus "Send Byte"
+  command.
 
 properties:
   compatible:
     oneOf:
       - enum:
+          - maxim,max7356
+          - maxim,max7357
+          - maxim,max7358
+          - maxim,max7367
+          - maxim,max7368
+          - maxim,max7369
           - nxp,pca9540
           - nxp,pca9542
           - nxp,pca9543
@@ -59,6 +67,9 @@ properties:
     description: if present, overrides i2c-mux-idle-disconnect
     $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
 
+  vdd-supply:
+    description: A voltage regulator supplying power to the chip.
+
 required:
   - compatible
   - reg
@@ -71,6 +82,8 @@ allOf:
           compatible:
             contains:
               enum:
+                - maxim,max7367
+                - maxim,max7369
                 - nxp,pca9542
                 - nxp,pca9543
                 - nxp,pca9544
@@ -97,6 +110,8 @@ examples:
             #size-cells = <0>;
             reg = <0x74>;
 
+            vdd-supply = <&p3v3>;
+
             interrupt-parent = <&ipic>;
             interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
-- 
2.39.2

[PATCH v12 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support

[Patrick Rudolph]

Add support for the following Maxim chips using the existing PCA954x
driver:
- MAX7356
- MAX7357
- MAX7358
- MAX7367
- MAX7368
- MAX7369

All added Maxim chips behave like the PCA954x, where a single SMBUS byte
write selects up to 8 channels to be bridged to the primary bus.

While the MAX7357/MAX7358 have interrupt support, they don't act as
interrupt controller like the PCA9545 does. Thus don't enable IRQ support
and handle them like the PCA9548.

Tested using the MAX7357.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 drivers/i2c/muxes/Kconfig           |  6 +--
 drivers/i2c/muxes/i2c-mux-pca954x.c | 60 ++++++++++++++++++++++++++++-
 2 files changed, 62 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index ea838dbae32e..db1b9057612a 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -65,11 +65,11 @@ config I2C_MUX_PCA9541
 	  will be called i2c-mux-pca9541.
 
 config I2C_MUX_PCA954x
-	tristate "NXP PCA954x and PCA984x I2C Mux/switches"
+	tristate "NXP PCA954x/PCA984x and Maxim MAX735x/MAX736x I2C Mux/switches"
 	depends on GPIOLIB || COMPILE_TEST
 	help
-	  If you say yes here you get support for the NXP PCA954x
-	  and PCA984x I2C mux/switch devices.
+	  If you say yes here you get support for NXP PCA954x/PCA984x
+	  and Maxim MAX735x/MAX736x I2C mux/switch devices.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mux-pca954x.
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 0ccee2ae5720..39f313658b18 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -4,6 +4,7 @@
  *
  * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
  * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (c) 2022 9elements GmbH <patrick.rudolph@9elements.com>
  *
  * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
  * chips made by NXP Semiconductors.
@@ -11,6 +12,12 @@
  *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
  *	 PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849.
  *
+ * It's also compatible to Maxims MAX735x I2C switch chips, which are controlled
+ * as the NXP PCA9548 and the MAX736x chips that act like the PCA9544.
+ *
+ * This includes the:
+ *	 MAX7356, MAX7357, MAX7358, MAX7367, MAX7368 and MAX7369
+ *
  * These chips are all controlled via the I2C bus itself, and all have a
  * single 8-bit register. The upstream "parent" bus fans out to two,
  * four, or eight downstream busses or channels; which of these
@@ -51,6 +58,12 @@
 #define PCA954X_IRQ_OFFSET 4
 
 enum pca_type {
+	max_7367,
+	max_7368,
+	max_7369,
+	max_7356,
+	max_7357,
+	max_7358,
 	pca_9540,
 	pca_9542,
 	pca_9543,
@@ -90,8 +103,41 @@ struct pca954x {
 	raw_spinlock_t lock;
 };
 
-/* Provide specs for the PCA954x types we know about */
+/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
 static const struct chip_desc chips[] = {
+	[max_7356] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[max_7357] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[max_7358] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[max_7367] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+		.has_irq = 1,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[max_7368] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[max_7369] = {
+		.nchans = 4,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+		.has_irq = 1,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
 	[pca_9540] = {
 		.nchans = 2,
 		.enable = 0x4,
@@ -177,6 +223,12 @@ static const struct chip_desc chips[] = {
 };
 
 static const struct i2c_device_id pca954x_id[] = {
+	{ "max7356", max_7356 },
+	{ "max7357", max_7357 },
+	{ "max7358", max_7358 },
+	{ "max7367", max_7367 },
+	{ "max7368", max_7368 },
+	{ "max7369", max_7369 },
 	{ "pca9540", pca_9540 },
 	{ "pca9542", pca_9542 },
 	{ "pca9543", pca_9543 },
@@ -194,6 +246,12 @@ static const struct i2c_device_id pca954x_id[] = {
 MODULE_DEVICE_TABLE(i2c, pca954x_id);
 
 static const struct of_device_id pca954x_of_match[] = {
+	{ .compatible = "maxim,max7356", .data = &chips[max_7356] },
+	{ .compatible = "maxim,max7357", .data = &chips[max_7357] },
+	{ .compatible = "maxim,max7358", .data = &chips[max_7358] },
+	{ .compatible = "maxim,max7367", .data = &chips[max_7367] },
+	{ .compatible = "maxim,max7368", .data = &chips[max_7368] },
+	{ .compatible = "maxim,max7369", .data = &chips[max_7369] },
 	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
 	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
 	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
-- 
2.39.2

Re: [PATCH v12 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support

[Christophe JAILLET]

Le 17/04/2023 à 12:47, Patrick Rudolph a écrit :
> Add support for the following Maxim chips using the existing PCA954x
> driver:
> - MAX7356
> - MAX7357
> - MAX7358
> - MAX7367
> - MAX7368
> - MAX7369
> 
> All added Maxim chips behave like the PCA954x, where a single SMBUS byte
> write selects up to 8 channels to be bridged to the primary bus.
> 
> While the MAX7357/MAX7358 have interrupt support, they don't act as
> interrupt controller like the PCA9545 does. Thus don't enable IRQ support
> and handle them like the PCA9548.
> 
> Tested using the MAX7357.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> ---
>   drivers/i2c/muxes/Kconfig           |  6 +--
>   drivers/i2c/muxes/i2c-mux-pca954x.c | 60 ++++++++++++++++++++++++++++-
>   2 files changed, 62 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
> index ea838dbae32e..db1b9057612a 100644
> --- a/drivers/i2c/muxes/Kconfig
> +++ b/drivers/i2c/muxes/Kconfig
> @@ -65,11 +65,11 @@ config I2C_MUX_PCA9541
>   	  will be called i2c-mux-pca9541.
>   
>   config I2C_MUX_PCA954x
> -	tristate "NXP PCA954x and PCA984x I2C Mux/switches"
> +	tristate "NXP PCA954x/PCA984x and Maxim MAX735x/MAX736x I2C Mux/switches"
>   	depends on GPIOLIB || COMPILE_TEST
>   	help
> -	  If you say yes here you get support for the NXP PCA954x
> -	  and PCA984x I2C mux/switch devices.
> +	  If you say yes here you get support for NXP PCA954x/PCA984x
> +	  and Maxim MAX735x/MAX736x I2C mux/switch devices.
>   
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called i2c-mux-pca954x.
> diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
> index 0ccee2ae5720..39f313658b18 100644
> --- a/drivers/i2c/muxes/i2c-mux-pca954x.c
> +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
> @@ -4,6 +4,7 @@
>    *
>    * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
>    * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
> + * Copyright (c) 2022 9elements GmbH <patrick.rudolph@9elements.com>
>    *
>    * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
>    * chips made by NXP Semiconductors.
> @@ -11,6 +12,12 @@
>    *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
>    *	 PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849.
>    *
> + * It's also compatible to Maxims MAX735x I2C switch chips, which are controlled
> + * as the NXP PCA9548 and the MAX736x chips that act like the PCA9544.
> + *
> + * This includes the:
> + *	 MAX7356, MAX7357, MAX7358, MAX7367, MAX7368 and MAX7369
> + *
>    * These chips are all controlled via the I2C bus itself, and all have a
>    * single 8-bit register. The upstream "parent" bus fans out to two,
>    * four, or eight downstream busses or channels; which of these
> @@ -51,6 +58,12 @@
>   #define PCA954X_IRQ_OFFSET 4
>   
>   enum pca_type {
> +	max_7367,
> +	max_7368,
> +	max_7369,
> +	max_7356,
> +	max_7357,
> +	max_7358,

Should there be another version:

Nit: any reason to have it "out-of order" (7356, ..., 7367, ...)?

>   	pca_9540,
>   	pca_9542,
>   	pca_9543,
> @@ -90,8 +103,41 @@ struct pca954x {
>   	raw_spinlock_t lock;
>   };
>   
> -/* Provide specs for the PCA954x types we know about */
> +/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
>   static const struct chip_desc chips[] = {
> +	[max_7356] = {
> +		.nchans = 8,
> +		.muxtype = pca954x_isswi,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
> +	[max_7357] = {
> +		.nchans = 8,
> +		.muxtype = pca954x_isswi,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
> +	[max_7358] = {
> +		.nchans = 8,
> +		.muxtype = pca954x_isswi,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
> +	[max_7367] = {
> +		.nchans = 4,
> +		.muxtype = pca954x_isswi,
> +		.has_irq = 1,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
> +	[max_7368] = {
> +		.nchans = 4,
> +		.muxtype = pca954x_isswi,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
> +	[max_7369] = {
> +		.nchans = 4,
> +		.enable = 0x4,
> +		.muxtype = pca954x_ismux,
> +		.has_irq = 1,
> +		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
> +	},
>   	[pca_9540] = {
>   		.nchans = 2,
>   		.enable = 0x4,
> @@ -177,6 +223,12 @@ static const struct chip_desc chips[] = {
>   };
>   
>   static const struct i2c_device_id pca954x_id[] = {
> +	{ "max7356", max_7356 },
> +	{ "max7357", max_7357 },
> +	{ "max7358", max_7358 },
> +	{ "max7367", max_7367 },
> +	{ "max7368", max_7368 },
> +	{ "max7369", max_7369 },
>   	{ "pca9540", pca_9540 },
>   	{ "pca9542", pca_9542 },
>   	{ "pca9543", pca_9543 },
> @@ -194,6 +246,12 @@ static const struct i2c_device_id pca954x_id[] = {
>   MODULE_DEVICE_TABLE(i2c, pca954x_id);
>   
>   static const struct of_device_id pca954x_of_match[] = {
> +	{ .compatible = "maxim,max7356", .data = &chips[max_7356] },
> +	{ .compatible = "maxim,max7357", .data = &chips[max_7357] },
> +	{ .compatible = "maxim,max7358", .data = &chips[max_7358] },
> +	{ .compatible = "maxim,max7367", .data = &chips[max_7367] },
> +	{ .compatible = "maxim,max7368", .data = &chips[max_7368] },
> +	{ .compatible = "maxim,max7369", .data = &chips[max_7369] },
>   	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
>   	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
>   	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },

[PATCH v12 4/4] i2c: muxes: pca954x: Add regulator support

[Patrick Rudolph]

Add a vdd regulator and enable it for boards that have the
mux powered off by default.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 drivers/i2c/muxes/i2c-mux-pca954x.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 39f313658b18..42f467dc7995 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/property.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/mux/mux.h>
@@ -101,6 +102,7 @@ struct pca954x {
 	struct irq_domain *irq;
 	unsigned int irq_mask;
 	raw_spinlock_t lock;
+	struct regulator *supply;
 };
 
 /* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -440,6 +442,8 @@ static void pca954x_cleanup(struct i2c_mux_core *muxc)
 	struct pca954x *data = i2c_mux_priv(muxc);
 	int c, irq;
 
+	regulator_disable(data->supply);
+
 	if (data->irq) {
 		for (c = 0; c < data->chip->nchans; c++) {
 			irq = irq_find_mapping(data->irq, c);
@@ -492,10 +496,23 @@ static int pca954x_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, muxc);
 	data->client = client;
 
+	data->supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(data->supply))
+		return dev_err_probe(dev, PTR_ERR(data->supply),
+				"Failed to request regulator\n");
+
+	ret = regulator_enable(data->supply);
+	if (ret) {
+		dev_err(dev, "Failed to enable vdd supply: %d\n", ret);
+		return ret;
+	}
+
 	/* Reset the mux if a reset GPIO is specified. */
 	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio))
-		return PTR_ERR(gpio);
+	if (IS_ERR(gpio)) {
+		ret = PTR_ERR(gpio);
+		goto fail_cleanup;
+	}
 	if (gpio) {
 		udelay(1);
 		gpiod_set_value_cansleep(gpio, 0);
@@ -512,7 +529,7 @@ static int pca954x_probe(struct i2c_client *client)
 
 		ret = i2c_get_device_id(client, &id);
 		if (ret && ret != -EOPNOTSUPP)
-			return ret;
+			goto fail_cleanup;
 
 		if (!ret &&
 		    (id.manufacturer_id != data->chip->id.manufacturer_id ||
@@ -520,7 +537,8 @@ static int pca954x_probe(struct i2c_client *client)
 			dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
 				 id.manufacturer_id, id.part_id,
 				 id.die_revision);
-			return -ENODEV;
+			ret = -ENODEV;
+			goto fail_cleanup;
 		}
 	}
 
@@ -539,7 +557,8 @@ static int pca954x_probe(struct i2c_client *client)
 	ret = pca954x_init(client, data);
 	if (ret < 0) {
 		dev_warn(dev, "probe failed\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto fail_cleanup;
 	}
 
 	ret = pca954x_irq_setup(muxc);
-- 
2.39.2

Re: [PATCH v12 4/4] i2c: muxes: pca954x: Add regulator support

[Christophe JAILLET]

Le 17/04/2023 à 12:48, Patrick Rudolph a écrit :
> Add a vdd regulator and enable it for boards that have the
> mux powered off by default.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> ---
>   drivers/i2c/muxes/i2c-mux-pca954x.c | 29 ++++++++++++++++++++++++-----
>   1 file changed, 24 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
> index 39f313658b18..42f467dc7995 100644
> --- a/drivers/i2c/muxes/i2c-mux-pca954x.c
> +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
> @@ -49,6 +49,7 @@
>   #include <linux/module.h>
>   #include <linux/pm.h>
>   #include <linux/property.h>
> +#include <linux/regulator/consumer.h>
>   #include <linux/slab.h>
>   #include <linux/spinlock.h>
>   #include <dt-bindings/mux/mux.h>
> @@ -101,6 +102,7 @@ struct pca954x {
>   	struct irq_domain *irq;
>   	unsigned int irq_mask;
>   	raw_spinlock_t lock;
> +	struct regulator *supply;
>   };
>   
>   /* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
> @@ -440,6 +442,8 @@ static void pca954x_cleanup(struct i2c_mux_core *muxc)
>   	struct pca954x *data = i2c_mux_priv(muxc);
>   	int c, irq;
>   
> +	regulator_disable(data->supply);
> +
>   	if (data->irq) {
>   		for (c = 0; c < data->chip->nchans; c++) {
>   			irq = irq_find_mapping(data->irq, c);
> @@ -492,10 +496,23 @@ static int pca954x_probe(struct i2c_client *client)
>   	i2c_set_clientdata(client, muxc);
>   	data->client = client;
>   
> +	data->supply = devm_regulator_get(dev, "vdd");
> +	if (IS_ERR(data->supply))
> +		return dev_err_probe(dev, PTR_ERR(data->supply),
> +				"Failed to request regulator\n");
> +
> +	ret = regulator_enable(data->supply);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable vdd supply: %d\n", ret);
> +		return ret;

Should there be another version:

Nit: return dev_err_probe... for consistancy?

> +	}
> +
>   	/* Reset the mux if a reset GPIO is specified. */
>   	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> -	if (IS_ERR(gpio))
> -		return PTR_ERR(gpio);
> +	if (IS_ERR(gpio)) {
> +		ret = PTR_ERR(gpio);
> +		goto fail_cleanup;
> +	}
>   	if (gpio) {
>   		udelay(1);
>   		gpiod_set_value_cansleep(gpio, 0);
> @@ -512,7 +529,7 @@ static int pca954x_probe(struct i2c_client *client)
>   
>   		ret = i2c_get_device_id(client, &id);
>   		if (ret && ret != -EOPNOTSUPP)
> -			return ret;
> +			goto fail_cleanup;
>   
>   		if (!ret &&
>   		    (id.manufacturer_id != data->chip->id.manufacturer_id ||
> @@ -520,7 +537,8 @@ static int pca954x_probe(struct i2c_client *client)
>   			dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
>   				 id.manufacturer_id, id.part_id,
>   				 id.die_revision);
> -			return -ENODEV;
> +			ret = -ENODEV;
> +			goto fail_cleanup;
>   		}
>   	}
>   
> @@ -539,7 +557,8 @@ static int pca954x_probe(struct i2c_client *client)
>   	ret = pca954x_init(client, data);
>   	if (ret < 0) {
>   		dev_warn(dev, "probe failed\n");
> -		return -ENODEV;
> +		ret = -ENODEV;
> +		goto fail_cleanup;
>   	}
>   
>   	ret = pca954x_irq_setup(muxc);