From: arinc9.unal@gmail.com
To: Sean Wang <sean.wang@mediatek.com>,
Landen Chao <Landen.Chao@mediatek.com>,
DENG Qingfang <dqfext@gmail.com>,
Daniel Golle <daniel@makrotopia.org>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Arınç ÜNAL" <arinc.unal@arinc9.com>,
"Richard van Schagen" <richard@routerhints.com>,
"Richard van Schagen" <vschagen@cs.com>,
"Frank Wunderlich" <frank-w@public-files.de>,
"Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
erkin.bozoglu@xeront.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 22/24] net: dsa: mt7530: get rid of useless error returns on phylink code path
Date: Tue, 25 Apr 2023 11:29:31 +0300 [thread overview]
Message-ID: <20230425082933.84654-23-arinc.unal@arinc9.com> (raw)
In-Reply-To: <20230425082933.84654-1-arinc.unal@arinc9.com>
From: Arınç ÜNAL <arinc.unal@arinc9.com>
Remove error returns on the cases where they are already handled with the
function the mac_port_get_caps member points to.
mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
phylink but the port and interface modes are already handled there.
Change the functions and the mac_port_config function pointer to void now
that there're no error returns anymore.
Remove mt753x_is_mac_port() that used to help the said error returns.
On mt7531_mac_config(), switch to if statements to simplify the code.
Remove internal phy cases from mt753x_phylink_mac_config() as there is no
configuration to be done for them. There's also no need to check the
interface mode as that's already handled with the function the
mac_port_get_caps member points to.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/dsa/mt7530.c | 81 ++++++++--------------------------------
drivers/net/dsa/mt7530.h | 2 +-
2 files changed, 17 insertions(+), 66 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 0bd38323e2b6..02e6ba5a4403 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2550,7 +2550,7 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
}
}
-static int
+static void
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
@@ -2561,22 +2561,14 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
} else if (port == 6) {
mt7530_setup_port6(priv->ds, interface);
}
-
- return 0;
}
-static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
- phy_interface_t interface,
- struct phy_device *phydev)
+static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
+ phy_interface_t interface,
+ struct phy_device *phydev)
{
u32 val;
- if (priv->p5_sgmii) {
- dev_err(priv->dev, "RGMII mode is not available for port %d\n",
- port);
- return -EINVAL;
- }
-
val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
val |= GP_CLK_EN;
val &= ~GP_MODE_MASK;
@@ -2604,20 +2596,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
case PHY_INTERFACE_MODE_RGMII_ID:
break;
default:
- return -EINVAL;
+ break;
}
}
- mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
- return 0;
-}
-
-static bool mt753x_is_mac_port(u32 port)
-{
- return (port == 5 || port == 6);
+ mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
}
-static int
+static void
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
@@ -2625,42 +2611,21 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
struct phy_device *phydev;
struct dsa_port *dp;
- if (!mt753x_is_mac_port(port)) {
- dev_err(priv->dev, "port %d is not a MAC port\n", port);
- return -EINVAL;
- }
-
- switch (interface) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
+ if (phy_interface_mode_is_rgmii(interface)) {
dp = dsa_to_port(ds, port);
phydev = dp->slave->phydev;
- return mt7531_rgmii_setup(priv, port, interface, phydev);
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_NA:
- case PHY_INTERFACE_MODE_1000BASEX:
- case PHY_INTERFACE_MODE_2500BASEX:
- /* handled in SGMII PCS driver */
- return 0;
- default:
- return -EINVAL;
+ mt7531_rgmii_setup(priv, port, interface, phydev);
}
-
- return -EINVAL;
}
-static int
+static void
mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
- if (!priv->info->mac_port_config)
- return 0;
-
- return priv->info->mac_port_config(ds, port, mode, state->interface);
+ if (priv->info->mac_port_config)
+ priv->info->mac_port_config(ds, port, mode, state->interface);
}
static struct phylink_pcs *
@@ -2689,30 +2654,18 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
u32 mcr_cur, mcr_new;
switch (port) {
- case 0 ... 4: /* Internal phy */
- if (state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
- break;
case 5: /* Port 5, can be used as a CPU port. */
if (priv->p5_configured)
break;
- if (mt753x_mac_config(ds, port, mode, state) < 0)
- goto unsupported;
+ mt753x_mac_config(ds, port, mode, state);
break;
case 6: /* Port 6, can be used as a CPU port. */
if (priv->p6_configured)
break;
- if (mt753x_mac_config(ds, port, mode, state) < 0)
- goto unsupported;
+ mt753x_mac_config(ds, port, mode, state);
break;
- default:
-unsupported:
- dev_err(ds->dev, "%s: unsupported %s port: %i\n",
- __func__, phy_modes(state->interface), port);
- return;
}
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
@@ -2805,7 +2758,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
struct mt7530_priv *priv = ds->priv;
phy_interface_t interface;
int speed;
- int ret;
switch (port) {
case 5:
@@ -2830,9 +2782,8 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
else
speed = SPEED_1000;
- ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
- if (ret)
- return ret;
+ mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
+
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index f7a504e4c17b..b7f80a487073 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -722,7 +722,7 @@ struct mt753x_info {
void (*mac_port_validate)(struct dsa_switch *ds, int port,
phy_interface_t interface,
unsigned long *supported);
- int (*mac_port_config)(struct dsa_switch *ds, int port,
+ void (*mac_port_config)(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface);
};
--
2.37.2
next prev parent reply other threads:[~2023-04-25 8:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-25 8:29 [PATCH net-next 00/24] net: dsa: MT7530, MT7531, and MT7988 improvements arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 01/24] net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 02/24] net: dsa: mt7530: add missing @p5_interface to mt7530_priv description arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 03/24] net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel arinc9.unal
2023-04-25 15:06 ` Daniel Golle
2023-04-25 8:29 ` [PATCH net-next 04/24] net: dsa: mt7530: properly support MT7531AE and MT7531BE arinc9.unal
2023-04-25 15:04 ` Daniel Golle
2023-04-26 8:12 ` Arınç ÜNAL
2023-04-26 13:07 ` Daniel Golle
2023-04-26 14:39 ` Vladimir Oltean
2023-04-26 16:15 ` Daniel Golle
2023-04-25 8:29 ` [PATCH net-next 05/24] net: dsa: mt7530: improve comments regarding port 5 and 6 arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 06/24] net: dsa: mt7530: read XTAL value from correct register arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 07/24] net: dsa: mt7530: improve code path for setting up port 5 arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 08/24] net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 09/24] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 10/24] net: dsa: mt7530: empty default case on mt7530_setup_port5() arinc9.unal
2023-04-25 15:13 ` Daniel Golle
2023-04-26 8:22 ` Arınç ÜNAL
2023-04-25 8:29 ` [PATCH net-next 11/24] net: dsa: mt7530: call port 6 setup from mt7530_mac_config() arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 12/24] net: dsa: mt7530: remove pad_setup function pointer arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 13/24] net: dsa: mt7530: move XTAL check to mt7530_setup() arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 14/24] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6() arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 15/24] net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6() arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 16/24] net: dsa: mt7530: set TRGMII RD TAP if trgmii is being used arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 17/24] net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup() arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 18/24] net: dsa: mt7530: fix port capabilities for MT7988 arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 19/24] net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 20/24] net: dsa: mt7530: set interrupt register only for MT7530 arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 21/24] net: dsa: mt7530: force link-down on MACs before reset on MT7530 arinc9.unal
2023-04-25 8:29 ` arinc9.unal [this message]
2023-04-25 8:29 ` [PATCH net-next 23/24] net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch arinc9.unal
2023-04-25 8:29 ` [PATCH net-next 24/24] net: dsa: mt7530: run mt7530_pll_setup() only with 40 MHz XTAL arinc9.unal
2023-04-25 15:35 ` [PATCH net-next 00/24] net: dsa: MT7530, MT7531, and MT7988 improvements Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230425082933.84654-23-arinc.unal@arinc9.com \
--to=arinc9.unal@gmail.com \
--cc=Landen.Chao@mediatek.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=arinc.unal@arinc9.com \
--cc=bartel.eerdekens@constell8.be \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=erkin.bozoglu@xeront.com \
--cc=f.fainelli@gmail.com \
--cc=frank-w@public-files.de \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=richard@routerhints.com \
--cc=sean.wang@mediatek.com \
--cc=vschagen@cs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox