* [PATCH v2 1/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
@ 2023-04-25 13:30 ` bchihi
2023-04-25 13:30 ` [PATCH v2 2/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 bchihi
` (4 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: bchihi @ 2023-04-25 13:30 UTC (permalink / raw)
To: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel
Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree, wenst, james.lo, rex-bc.chen, nfraprado, abailon,
amergnat, khilman
From: Balsam CHIHI <bchihi@baylibre.com>
Add suspend and resume support to LVTS driver.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
drivers/thermal/mediatek/lvts_thermal.c | 34 +++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index d0a3f95b7884b..5ea8a9d569ea6 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1169,6 +1169,38 @@ static int lvts_remove(struct platform_device *pdev)
return 0;
}
+static int lvts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct lvts_domain *lvts_td;
+ int i;
+
+ lvts_td = platform_get_drvdata(pdev);
+
+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
+
+ clk_disable_unprepare(lvts_td->clk);
+
+ return 0;
+}
+
+static int lvts_resume(struct platform_device *pdev)
+{
+ struct lvts_domain *lvts_td;
+ int i, ret;
+
+ lvts_td = platform_get_drvdata(pdev);
+
+ ret = clk_prepare_enable(lvts_td->clk);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true);
+
+ return 0;
+}
+
static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{
.cal_offset = { 0x04, 0x07 },
@@ -1268,6 +1300,8 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
static struct platform_driver lvts_driver = {
.probe = lvts_probe,
.remove = lvts_remove,
+ .suspend = lvts_suspend,
+ .resume = lvts_resume,
.driver = {
.name = "mtk-lvts-thermal",
.of_match_table = lvts_of_match,
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 2/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
2023-04-25 13:30 ` [PATCH v2 1/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume bchihi
@ 2023-04-25 13:30 ` bchihi
2023-05-04 0:49 ` Nícolas F. R. A. Prado
2023-04-25 13:30 ` [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support bchihi
` (3 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: bchihi @ 2023-04-25 13:30 UTC (permalink / raw)
To: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel
Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree, wenst, james.lo, rex-bc.chen, nfraprado, abailon,
amergnat, khilman
From: Balsam CHIHI <bchihi@baylibre.com>
Add LVTS thermal controller definition for MT8192.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../thermal/mediatek,lvts-thermal.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 8fa5a46675c46..5e9eb62174268 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -26,4 +26,23 @@
#define MT8195_AP_CAM0 15
#define MT8195_AP_CAM1 16
+#define MT8192_MCU_BIG_CPU0 0
+#define MT8192_MCU_BIG_CPU1 1
+#define MT8192_MCU_BIG_CPU2 2
+#define MT8192_MCU_BIG_CPU3 3
+#define MT8192_MCU_LITTLE_CPU0 4
+#define MT8192_MCU_LITTLE_CPU1 5
+#define MT8192_MCU_LITTLE_CPU2 6
+#define MT8192_MCU_LITTLE_CPU3 7
+
+#define MT8192_AP_VPU0 8
+#define MT8192_AP_VPU1 9
+#define MT8192_AP_GPU0 10
+#define MT8192_AP_GPU1 11
+#define MT8192_AP_INFRA 12
+#define MT8192_AP_CAM 13
+#define MT8192_AP_MD0 14
+#define MT8192_AP_MD1 15
+#define MT8192_AP_MD2 16
+
#endif /* __MEDIATEK_LVTS_DT_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 2/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
2023-04-25 13:30 ` [PATCH v2 2/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 bchihi
@ 2023-05-04 0:49 ` Nícolas F. R. A. Prado
0 siblings, 0 replies; 12+ messages in thread
From: Nícolas F. R. A. Prado @ 2023-05-04 0:49 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, wenst, james.lo, rex-bc.chen, abailon,
amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:49PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add LVTS thermal controller definition for MT8192.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
2023-04-25 13:30 ` [PATCH v2 1/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume bchihi
2023-04-25 13:30 ` [PATCH v2 2/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 bchihi
@ 2023-04-25 13:30 ` bchihi
2023-04-28 20:10 ` Nícolas F. R. A. Prado
2023-05-04 0:51 ` Nícolas F. R. A. Prado
2023-04-25 13:30 ` [PATCH v2 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones bchihi
` (2 subsequent siblings)
5 siblings, 2 replies; 12+ messages in thread
From: bchihi @ 2023-04-25 13:30 UTC (permalink / raw)
To: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel
Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree, wenst, james.lo, rex-bc.chen, nfraprado, abailon,
amergnat, khilman
From: Balsam CHIHI <bchihi@baylibre.com>
Add LVTS Driver support for MT8192.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Co-developed-by : Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
drivers/thermal/mediatek/lvts_thermal.c | 92 +++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 5ea8a9d569ea6..8df7b4c72a658 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -80,6 +80,7 @@
#define LVTS_MSR_FILTERED_MODE 1
#define LVTS_HW_SHUTDOWN_MT8195 105000
+#define LVTS_HW_SHUTDOWN_MT8192 105000
static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
static int coeff_b = LVTS_COEFF_B;
@@ -1280,6 +1281,85 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
}
};
+static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
+ {
+ .cal_offset = { 0x04, 0x08 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_BIG_CPU0 },
+ { .dt_id = MT8192_MCU_BIG_CPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x0,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x0c, 0x10 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_BIG_CPU2 },
+ { .dt_id = MT8192_MCU_BIG_CPU3 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x100,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_MCU_LITTLE_CPU0 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU1 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU2 },
+ { .dt_id = MT8192_MCU_LITTLE_CPU3 }
+ },
+ .num_lvts_sensor = 4,
+ .offset = 0x200,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ }
+};
+
+static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
+ {
+ .cal_offset = { 0x24, 0x28 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_VPU0 },
+ { .dt_id = MT8192_AP_VPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x0,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x2c, 0x30 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_GPU0 },
+ { .dt_id = MT8192_AP_GPU1 }
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x100,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x34, 0x38 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_INFRA },
+ { .dt_id = MT8192_AP_CAM },
+ },
+ .num_lvts_sensor = 2,
+ .offset = 0x200,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ },
+ {
+ .cal_offset = { 0x3c, 0x40, 0x44 },
+ .lvts_sensor = {
+ { .dt_id = MT8192_AP_MD0 },
+ { .dt_id = MT8192_AP_MD1 },
+ { .dt_id = MT8192_AP_MD2 }
+ },
+ .num_lvts_sensor = 3,
+ .offset = 0x300,
+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+ }
+};
+
static const struct lvts_data mt8195_lvts_mcu_data = {
.lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1290,9 +1370,21 @@ static const struct lvts_data mt8195_lvts_ap_data = {
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
};
+static const struct lvts_data mt8192_lvts_mcu_data = {
+ .lvts_ctrl = mt8192_lvts_mcu_data_ctrl,
+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl),
+};
+
+static const struct lvts_data mt8192_lvts_ap_data = {
+ .lvts_ctrl = mt8192_lvts_ap_data_ctrl,
+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_ap_data_ctrl),
+};
+
static const struct of_device_id lvts_of_match[] = {
{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
+ { .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data },
+ { .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data },
{},
};
MODULE_DEVICE_TABLE(of, lvts_of_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
2023-04-25 13:30 ` [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support bchihi
@ 2023-04-28 20:10 ` Nícolas F. R. A. Prado
2023-05-04 0:51 ` Nícolas F. R. A. Prado
1 sibling, 0 replies; 12+ messages in thread
From: Nícolas F. R. A. Prado @ 2023-04-28 20:10 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, wenst, james.lo, rex-bc.chen, abailon,
amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:50PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add LVTS Driver support for MT8192.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Co-developed-by : Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 92 +++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 5ea8a9d569ea6..8df7b4c72a658 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
[..]
> +static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
> + {
> + .cal_offset = { 0x04, 0x08 },
> + .lvts_sensor = {
> + { .dt_id = MT8192_MCU_BIG_CPU0 },
> + { .dt_id = MT8192_MCU_BIG_CPU1 }
> + },
> + .num_lvts_sensor = 2,
> + .offset = 0x0,
> + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
Hi Balsam,
during the investigation I did to fix the interrupt issues I mentioned in v1, I
noticed that the threshold interrupts (hot, hot to normal, cold), only trigger
when the controller is configured to filtered mode. In immediate mode the
threshold interrupts are not triggered.
So I say we add
.mode = LVTS_MSR_FILTERED_MODE,
for all the controllers here. Same for MT8195, although I guess that'd be better
done in a separate series. And I haven't had time to test more on MT8195 to see
if I can get any interrupts there.
One issue with filtered mode is that the data read is often not ready (valid bit
unset), so most of the time it returns -EAGAIN. But I think that should be easy
to address by reading with a timeout (equal to the measurement interval we
already know), instead of a single time, if on filtered mode.
I'll also try to review the other commits in this series, though that'll have to
wait for next week.
Thanks,
Nícolas
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
2023-04-25 13:30 ` [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support bchihi
2023-04-28 20:10 ` Nícolas F. R. A. Prado
@ 2023-05-04 0:51 ` Nícolas F. R. A. Prado
1 sibling, 0 replies; 12+ messages in thread
From: Nícolas F. R. A. Prado @ 2023-05-04 0:51 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, wenst, james.lo, rex-bc.chen, abailon,
amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:50PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add LVTS Driver support for MT8192.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Co-developed-by : Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
As you're the one submitting the patch, your SoB should come last [1].
[1] https://www.kernel.org/doc/html/latest/process/submitting-patches.html#when-to-use-acked-by-cc-and-co-developed-by
Otherwise, with the change to use filtered mode instead of immediate mode as I
mentioned before,
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Thanks,
Nícolas
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
` (2 preceding siblings ...)
2023-04-25 13:30 ` [PATCH v2 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support bchihi
@ 2023-04-25 13:30 ` bchihi
2023-05-04 0:53 ` Nícolas F. R. A. Prado
2023-04-25 13:30 ` [PATCH v2 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation bchihi
2023-05-02 10:35 ` [PATCH v2 0/5] Add LVTS support for mt8192 Chen-Yu Tsai
5 siblings, 1 reply; 12+ messages in thread
From: bchihi @ 2023-04-25 13:30 UTC (permalink / raw)
To: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel
Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree, wenst, james.lo, rex-bc.chen, nfraprado, abailon,
amergnat, khilman
From: Balsam CHIHI <bchihi@baylibre.com>
Add thermal nodes and thermal zones for the mt8192.
The mt8192 SoC has several hotspots around the CPUs.
Specify the targeted temperature threshold to apply the mitigation
and define the associated cooling devices.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 454 +++++++++++++++++++++++
1 file changed, 454 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 87b91c8feaf96..eb2bd94e0ae86 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8192-power.h>
#include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8192";
@@ -71,6 +73,7 @@ cpu0: cpu@0 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu1: cpu@100 {
@@ -88,6 +91,7 @@ cpu1: cpu@100 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu2: cpu@200 {
@@ -105,6 +109,7 @@ cpu2: cpu@200 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu3: cpu@300 {
@@ -122,6 +127,7 @@ cpu3: cpu@300 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu4: cpu@400 {
@@ -139,6 +145,7 @@ cpu4: cpu@400 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu5: cpu@500 {
@@ -156,6 +163,7 @@ cpu5: cpu@500 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu6: cpu@600 {
@@ -173,6 +181,7 @@ cpu6: cpu@600 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu7: cpu@700 {
@@ -190,6 +199,7 @@ cpu7: cpu@700 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu-map {
@@ -685,6 +695,17 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8192-lvts-ap";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
@@ -1011,6 +1032,17 @@ nor_flash: spi@11234000 {
status = "disabled";
};
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8192-lvts-mcu";
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
efuse: efuse@11c10000 {
compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
reg = <0 0x11c10000 0 0x1000>;
@@ -1715,4 +1747,426 @@ larb2: larb@1f002000 {
power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+ trips {
+ cpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+ trips {
+ cpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+ trips {
+ cpu2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+ trips {
+ cpu3_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+ trips {
+ cpu4_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+ trips {
+ cpu5_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+ trips {
+ cpu6_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+ trips {
+ cpu7_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ vpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+ trips {
+ vpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ vpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+ trips {
+ vpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+ trips {
+ gpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+ trips {
+ gpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ infra-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+ trips {
+ infra_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ infra_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+ trips {
+ cam_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+ trips {
+ md0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+ trips {
+ md1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+ trips {
+ md2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
2023-04-25 13:30 ` [PATCH v2 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones bchihi
@ 2023-05-04 0:53 ` Nícolas F. R. A. Prado
0 siblings, 0 replies; 12+ messages in thread
From: Nícolas F. R. A. Prado @ 2023-05-04 0:53 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, wenst, james.lo, rex-bc.chen, abailon,
amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:51PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add thermal nodes and thermal zones for the mt8192.
> The mt8192 SoC has several hotspots around the CPUs.
> Specify the targeted temperature threshold to apply the mitigation
> and define the associated cooling devices.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8192.dtsi | 454 +++++++++++++++++++++++
> 1 file changed, 454 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 87b91c8feaf96..eb2bd94e0ae86 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
[..]
> + cooling-maps {
> + map0 {
> + trip = <&cpu0_alert>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
Just a nit, but it would be nice to have these aligned (same for others below).
In any case,
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Thanks,
Nícolas
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
` (3 preceding siblings ...)
2023-04-25 13:30 ` [PATCH v2 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones bchihi
@ 2023-04-25 13:30 ` bchihi
2023-05-04 1:01 ` Nícolas F. R. A. Prado
2023-05-02 10:35 ` [PATCH v2 0/5] Add LVTS support for mt8192 Chen-Yu Tsai
5 siblings, 1 reply; 12+ messages in thread
From: bchihi @ 2023-04-25 13:30 UTC (permalink / raw)
To: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel
Cc: linux-pm, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree, wenst, james.lo, rex-bc.chen, nfraprado, abailon,
amergnat, khilman
From: Balsam CHIHI <bchihi@baylibre.com>
Update LVTS calibration data documentation for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
drivers/thermal/mediatek/lvts_thermal.c | 59 ++++++++++++++++++-------
1 file changed, 43 insertions(+), 16 deletions(-)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 8df7b4c72a658..3df4989f9902b 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -531,30 +531,57 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
* The efuse blob values follows the sensor enumeration per thermal
* controller. The decoding of the stream is as follow:
*
- * stream index map for MCU Domain :
+ * MT8195 :
+ * Stream index map for MCU Domain mt8195 :
*
- * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
- * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
+ * <-----sensor#0-----> <-----sensor#1----->
+ * 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
*
- * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3----->
- * 0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
+ * <-----sensor#2-----> <-----sensor#3----->
+ * 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
*
- * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
- * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
+ * <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
+ * 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
*
- * stream index map for AP Domain :
+ * Stream index map for AP Domain mt8195 :
*
- * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
- * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
+ * <-----sensor#0-----> <-----sensor#1----->
+ * 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
*
- * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3----->
- * 0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
+ * <-----sensor#2-----> <-----sensor#3----->
+ * 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
*
- * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
- * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
+ * <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
+ * 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
*
- * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
- * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
+ * <-----sensor#7-----> <-----sensor#8----->
+ * 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
+ *
+ * MT8192 :
+ * Stream index map for MCU Domain mt8192 :
+ *
+ * <--------sensor#0---------> <--------sensor#1--------->
+ * 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B
+ *
+ * <--------sensor#2---------> <--------sensor#3--------->
+ * 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13
+ *
+ * <--------sensor#4---------> <--------sensor#5---------> <--------sensor#6---------> <--------sensor#7--------->
+ * 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23
+ *
+ * Stream index map for AP Domain mt8192 :
+ *
+ * <--------sensor#0---------> <--------sensor#1--------->
+ * 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B
+ *
+ * <--------sensor#2---------> <--------sensor#3--------->
+ * 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
+ *
+ * <--------sensor#4---------> <--------sensor#5--------->
+ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B
+ *
+ * <--------sensor#6---------> <--------sensor#7---------> <--------sensor#8--------->
+ * 0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47
*
* The data description gives the offset of the calibration data in
* this bytes stream for each sensor.
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
2023-04-25 13:30 ` [PATCH v2 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation bchihi
@ 2023-05-04 1:01 ` Nícolas F. R. A. Prado
0 siblings, 0 replies; 12+ messages in thread
From: Nícolas F. R. A. Prado @ 2023-05-04 1:01 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, wenst, james.lo, rex-bc.chen, abailon,
amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:52PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Update LVTS calibration data documentation for mt8192 and mt8195.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 59 ++++++++++++++++++-------
> 1 file changed, 43 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 8df7b4c72a658..3df4989f9902b 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -531,30 +531,57 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
> * The efuse blob values follows the sensor enumeration per thermal
> * controller. The decoding of the stream is as follow:
> *
> - * stream index map for MCU Domain :
> + * MT8195 :
> + * Stream index map for MCU Domain mt8195 :
> *
> - * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
> - * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
> + * <-----sensor#0-----> <-----sensor#1----->
> + * 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
I don't think you need to remove the controller calibration data from this
comment, even though you don't use it in the code. Could come in handy in the
future.
> *
[..]
> + * MT8192 :
> + * Stream index map for MCU Domain mt8192 :
> + *
> + * <--------sensor#0---------> <--------sensor#1--------->
> + * 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B
Each sensor data is 3 bytes long, just like for MT8195. The fourth byte contains
the controller calibration data, but it is spread across these fourth bytes. I'd
just leave these bytes undocumented for now since they're not currently used.
So,
+ * <-----sensor#0-----> <-----sensor#1----->
+ * 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B
etc.
With that fixed,
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Thanks,
Nícolas
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 0/5] Add LVTS support for mt8192
2023-04-25 13:30 [PATCH v2 0/5] Add LVTS support for mt8192 bchihi
` (4 preceding siblings ...)
2023-04-25 13:30 ` [PATCH v2 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation bchihi
@ 2023-05-02 10:35 ` Chen-Yu Tsai
5 siblings, 0 replies; 12+ messages in thread
From: Chen-Yu Tsai @ 2023-05-02 10:35 UTC (permalink / raw)
To: bchihi
Cc: daniel.lezcano, angelogioacchino.delregno, rafael, amitk,
rui.zhang, matthias.bgg, robh+dt, krzysztof.kozlowski+dt, rdunlap,
ye.xingchen, p.zabel, linux-pm, linux-kernel, linux-arm-kernel,
linux-mediatek, devicetree, james.lo, rex-bc.chen, nfraprado,
abailon, amergnat, khilman
On Tue, Apr 25, 2023 at 03:30:47PM +0200, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC.
> Also, add Suspend and Resume support to LVTS Driver (all SoCs),
> and update the documentation that describes the Calibration Data Offsets.
>
> Changelog:
> v2 :
> - Based on top of thermal/linux-next :
> base-commit: 7ac82227ee046f8234471de4c12a40b8c2d3ddcc
> - Squash "add thermal zones and thermal nodes" and
> "add temperature mitigation threshold" commits together to form
> "arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones" commit.
> - Add Suspend and Resume support to LVTS Driver.
> - Update Calibration Data documentation.
> - Fix calibration data offsets for mt8192
> (Thanks to "Chen-Yu Tsai" and "Nícolas F. R. A. Prado").
>
> v1 :
> - The initial series "Add LVTS support for mt8192" :
> "https://lore.kernel.org/all/20230307163413.143334-1-bchihi@baylibre.com/".
>
> Balsam CHIHI (5):
> thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
> dt-bindings: thermal: mediatek: Add LVTS thermal controller definition
> for mt8192
> thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
> arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
> thermal/drivers/mediatek/lvts_thermal: Update calibration data
> documentation
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
on a MT8192 Hayato Chromebook. Sensor readings look OK. Haven't tried
stress testing to hit thermal threshold yet.
^ permalink raw reply [flat|nested] 12+ messages in thread