[PATCH AUTOSEL 5.4 01/27] ASoC: dwc: limit the number of overrun messages

[PATCH AUTOSEL 5.4 01/27] ASoC: dwc: limit the number of overrun messages

[Sasha Levin]

From: Maxim Kochetkov <fido_max@inbox.ru>

[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]

On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/dwc/dwc-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c
index 65112b9d8588a..90b8814d7506a 100644
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -132,13 +132,13 @@ static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_TXFO) {
-			dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "TX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_RXFO) {
-			dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "RX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 	}
-- 
2.39.2

[PATCH AUTOSEL 5.4 02/27] xfrm: Check if_id in inbound policy/secpath match

[Sasha Levin]

From: Benedict Wong <benedictwong@google.com>

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.

Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_policy.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 6f58be5a17711..9d4b405659058 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -3223,7 +3223,7 @@ xfrm_secpath_reject(int idx, struct sk_buff *skb, const struct flowi *fl)
 
 static inline int
 xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
-	      unsigned short family)
+	      unsigned short family, u32 if_id)
 {
 	if (xfrm_state_kern(x))
 		return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family);
@@ -3234,7 +3234,8 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
 		(tmpl->allalgs || (tmpl->aalgos & (1<<x->props.aalgo)) ||
 		 !(xfrm_id_proto_match(tmpl->id.proto, IPSEC_PROTO_ANY))) &&
 		!(x->props.mode != XFRM_MODE_TRANSPORT &&
-		  xfrm_state_addr_cmp(tmpl, x, family));
+		  xfrm_state_addr_cmp(tmpl, x, family)) &&
+		(if_id == 0 || if_id == x->if_id);
 }
 
 /*
@@ -3246,7 +3247,7 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
  */
 static inline int
 xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int start,
-	       unsigned short family)
+	       unsigned short family, u32 if_id)
 {
 	int idx = start;
 
@@ -3256,7 +3257,7 @@ xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int star
 	} else
 		start = -1;
 	for (; idx < sp->len; idx++) {
-		if (xfrm_state_ok(tmpl, sp->xvec[idx], family))
+		if (xfrm_state_ok(tmpl, sp->xvec[idx], family, if_id))
 			return ++idx;
 		if (sp->xvec[idx]->props.mode != XFRM_MODE_TRANSPORT) {
 			if (start == -1)
@@ -3666,7 +3667,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 		 * are implied between each two transformations.
 		 */
 		for (i = xfrm_nr-1, k = 0; i >= 0; i--) {
-			k = xfrm_policy_ok(tpp[i], sp, k, family);
+			k = xfrm_policy_ok(tpp[i], sp, k, family, if_id);
 			if (k < 0) {
 				if (k < -1)
 					/* "-2 - errored_index" returned */
-- 
2.39.2

[PATCH AUTOSEL 5.4 03/27] ASoC: ssm2602: Add workaround for playback distortions

[Sasha Levin]

From: Paweł Anikiel <pan@semihalf.com>

[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]

Apply a workaround for what appears to be a hardware quirk.

The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.

This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).

Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
        i2cset -y 0 0x1a $(($1*2)) $2
}

For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x87 # out, dac
  ssmset 0x06 0x07 # chip
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  (enable MCLK)
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x06 0x1f # chip
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  ssmset 0x06 0x07 # dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  ssmset 0x06 0x07 # out
  NOT OK

For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  (enable MCLK after reset)
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  NOT OK

  ssmset 0x06 0x07 # chip, out, dac
  NOT OK

Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/ssm2602.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 464a4d7873bba..b797f620e3521 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -53,6 +53,18 @@ static const struct reg_default ssm2602_reg[SSM2602_CACHEREGNUM] = {
 	{ .reg = 0x09, .def = 0x0000 }
 };
 
+/*
+ * ssm2602 register patch
+ * Workaround for playback distortions after power up: activates digital
+ * core, and then powers on output, DAC, and whole chip at the same time
+ */
+
+static const struct reg_sequence ssm2602_patch[] = {
+	{ SSM2602_ACTIVE, 0x01 },
+	{ SSM2602_PWR,    0x07 },
+	{ SSM2602_RESET,  0x00 },
+};
+
 
 /*Appending several "None"s just for OSS mixer use*/
 static const char *ssm2602_input_select[] = {
@@ -588,6 +600,9 @@ static int ssm260x_component_probe(struct snd_soc_component *component)
 		return ret;
 	}
 
+	regmap_register_patch(ssm2602->regmap, ssm2602_patch,
+			      ARRAY_SIZE(ssm2602_patch));
+
 	/* set the update bits */
 	regmap_update_bits(ssm2602->regmap, SSM2602_LINVOL,
 			    LINVOL_LRIN_BOTH, LINVOL_LRIN_BOTH);
-- 
2.39.2

[PATCH AUTOSEL 5.4 04/27] media: dvb_demux: fix a bug for the continuity counter

[Sasha Levin]

From: YongSu Yoo <yongsuyoo0215@gmail.com>

[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]

In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.

Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com

Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_demux.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c
index 39a2c6ccf31d7..9904a170faeff 100644
--- a/drivers/media/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb-core/dvb_demux.c
@@ -125,12 +125,12 @@ static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed,
 
 	cc = buf[3] & 0x0f;
 	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
 	if (!ccok) {
 		set_buf_flags(feed, DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED);
 		dprintk_sect_loss("missed packet: %d instead of %d!\n",
 				  cc, (feed->cc + 1) & 0x0f);
 	}
+	feed->cc = cc;
 
 	if (buf[1] & 0x40)	// PUSI ?
 		feed->peslen = 0xfffa;
@@ -310,7 +310,6 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
 
 	cc = buf[3] & 0x0f;
 	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
 
 	if (buf[3] & 0x20) {
 		/* adaption field present, check for discontinuity_indicator */
@@ -346,6 +345,7 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
 		feed->pusi_seen = false;
 		dvb_dmx_swfilter_section_new(feed);
 	}
+	feed->cc = cc;
 
 	if (buf[1] & 0x40) {
 		/* PUSI=1 (is set), section boundary is here */
-- 
2.39.2

[PATCH AUTOSEL 5.4 05/27] media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]

In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.

Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/az6027.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index ffc0db67d4d68..2b56393d10008 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -988,6 +988,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			/* write/read request */
 			if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
 				req = 0xB9;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (msg[i].len << 8);
 				length = msg[i + 1].len + 6;
@@ -1001,6 +1005,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 
 				/* demod 16bit addr */
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (2 << 8);
 				length = msg[i].len - 2;
@@ -1026,6 +1034,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			} else {
 
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = msg[i].buf[0] & 0x00FF;
 				value = msg[i].addr + (1 << 8);
 				length = msg[i].len - 1;
-- 
2.39.2

[PATCH AUTOSEL 5.4 06/27] media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]

In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/ec168.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c
index e30305876840f..1191e32407c77 100644
--- a/drivers/media/usb/dvb-usb-v2/ec168.c
+++ b/drivers/media/usb/dvb-usb-v2/ec168.c
@@ -115,6 +115,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	while (i < num) {
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = READ_DEMOD;
 				req.value = 0;
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */
@@ -131,6 +135,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			}
 		} else {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_DEMOD;
 				req.value = msg[i].buf[1]; /* val */
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */
@@ -139,6 +147,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = ec168_ctrl_msg(d, &req);
 				i += 1;
 			} else {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_I2C;
 				req.value = msg[i].buf[0]; /* val */
 				req.index = 0x0100 + msg[i].addr; /* I2C addr */
-- 
2.39.2

[PATCH AUTOSEL 5.4 07/27] media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]

In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/ce6230.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/ce6230.c b/drivers/media/usb/dvb-usb-v2/ce6230.c
index 44540de1a2066..d3b5cb4a24daf 100644
--- a/drivers/media/usb/dvb-usb-v2/ce6230.c
+++ b/drivers/media/usb/dvb-usb-v2/ce6230.c
@@ -101,6 +101,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_READ;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];
@@ -117,6 +121,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		} else {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_WRITE;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];
-- 
2.39.2

[PATCH AUTOSEL 5.4 08/27] media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer

[Sasha Levin]

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]

In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 0fe71437601e7..ec9bbd8c89ad3 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -176,6 +176,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1 || msg[1].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
 				/* return demod page from driver cache */
@@ -189,6 +193,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if (msg[0].len < 2) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_RD;
@@ -217,8 +225,16 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
+				if (msg[0].len < 2) {
+					ret = -EOPNOTSUPP;
+					goto err_mutex_unlock;
+				}
 				/* save demod page for later demod access */
 				dev->page = msg[0].buf[1];
 				ret = 0;
@@ -231,6 +247,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if ((msg[0].len < 23) && (!dev->new_i2c_write)) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_WR;
-- 
2.39.2

[PATCH AUTOSEL 5.4 09/27] media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]

In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/digitv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 99a39339d45d5..cf5ec8c1f6773 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -63,6 +63,10 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
 
 	for (i = 0; i < num; i++) {
+		if (msg[i].len < 1) {
+			i = -EOPNOTSUPP;
+			break;
+		}
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
 			if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0,
-- 
2.39.2

[PATCH AUTOSEL 5.4 10/27] media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]

In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.

Fix this error by returning a negative value if message execution fails.

Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dw2102.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 8493ebb377c4d..f8f589ebab74b 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -946,7 +946,7 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 	for (i = 0; i < 6; i++) {
 		obuf[1] = 0xf0 + i;
 		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
+			return -1;
 		else
 			mac[i] = ibuf[0];
 	}
-- 
2.39.2

[PATCH AUTOSEL 5.4 11/27] media: netup_unidvb: fix irq init by register it at the end of probe

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]

IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.

Spinlock dma->lock and i2c->lock suffer from the same problem.

Fix this by registering the irq at the end of probe.

Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/pci/netup_unidvb/netup_unidvb_core.c  | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index eb5621c9ebf85..58035b5c41c4e 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -887,12 +887,7 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		ndev->lmmio0, (u32)pci_resource_len(pci_dev, 0),
 		ndev->lmmio1, (u32)pci_resource_len(pci_dev, 1),
 		pci_dev->irq);
-	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
-			"netup_unidvb", pci_dev) < 0) {
-		dev_err(&pci_dev->dev,
-			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
-		goto irq_request_err;
-	}
+
 	ndev->dma_size = 2 * 188 *
 		NETUP_DMA_BLOCKS_COUNT * NETUP_DMA_PACKETS_COUNT;
 	ndev->dma_virt = dma_alloc_coherent(&pci_dev->dev,
@@ -933,6 +928,14 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n");
 		goto dma_setup_err;
 	}
+
+	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
+			"netup_unidvb", pci_dev) < 0) {
+		dev_err(&pci_dev->dev,
+			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
+		goto dma_setup_err;
+	}
+
 	dev_info(&pci_dev->dev,
 		"netup_unidvb: device has been initialized\n");
 	return 0;
@@ -951,8 +954,6 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 	dma_free_coherent(&pci_dev->dev, ndev->dma_size,
 			ndev->dma_virt, ndev->dma_phys);
 dma_alloc_err:
-	free_irq(pci_dev->irq, pci_dev);
-irq_request_err:
 	iounmap(ndev->lmmio1);
 pci_bar1_error:
 	iounmap(ndev->lmmio0);
-- 
2.39.2

[PATCH AUTOSEL 5.4 12/27] media: dvb_ca_en50221: fix a size write bug

[Sasha Levin]

From: YongSu Yoo <yongsuyoo0215@gmail.com>

[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]

The function of "dvb_ca_en50221_write_data" at source/drivers/media
/dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of
"dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/
dvb_ca_en50221.c.
The second case is for writing the host link buf size on the
Command Register in the function of "dvb_ca_en50221_link_init"
at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following.
In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the
Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the
Command Register should be set. We can see this setting operation
in the function of the "dvb_ca_en50221_link_init" like below.
...
	if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
		return ret;
...
But, after that, the real writing operation is implemented using
the function of the "dvb_ca_en50221_write_data" in the function of
"dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data"
includes the function of "ca->pub->write_cam_control",
and the function of the "ca->pub->write_cam_control" in the
function of the "dvb_ca_en50221_wrte_data" does not include
"CMDREG_SW" flag like below.
...
	if ((status = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC",
but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the
"dvb_ca_en50221_link_init" was rollbacked by the follwoing function
of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size
is not properly written in the CI module.
Through this patch, we fix this bug.

Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index fd476536d32ed..b1a7b5f8b9aa4 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -187,7 +187,7 @@ static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
 				    u8 *ebuf, int ecount);
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
-				     u8 *ebuf, int ecount);
+				     u8 *ebuf, int ecount, int size_write_flag);
 
 /**
  * Safely find needle in haystack.
@@ -370,7 +370,7 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
 	ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10);
 	if (ret)
 		return ret;
-	ret = dvb_ca_en50221_write_data(ca, slot, buf, 2);
+	ret = dvb_ca_en50221_write_data(ca, slot, buf, 2, CMDREG_SW);
 	if (ret != 2)
 		return -EIO;
 	ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
@@ -778,11 +778,13 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
  * @buf: The data in this buffer is treated as a complete link-level packet to
  *	 be written.
  * @bytes_write: Size of ebuf.
+ * @size_write_flag: A flag on Command Register which says whether the link size
+ * information will be writen or not.
  *
  * return: Number of bytes written, or < 0 on error.
  */
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
-				     u8 *buf, int bytes_write)
+				     u8 *buf, int bytes_write, int size_write_flag)
 {
 	struct dvb_ca_slot *sl = &ca->slot_info[slot];
 	int status;
@@ -817,7 +819,7 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
 
 	/* OK, set HC bit */
 	status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
-					    IRQEN | CMDREG_HC);
+					    IRQEN | CMDREG_HC | size_write_flag);
 	if (status)
 		goto exit;
 
@@ -1505,7 +1507,7 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 
 			mutex_lock(&sl->slot_lock);
 			status = dvb_ca_en50221_write_data(ca, slot, fragbuf,
-							   fraglen + 2);
+							   fraglen + 2, 0);
 			mutex_unlock(&sl->slot_lock);
 			if (status == (fraglen + 2)) {
 				written = 1;
-- 
2.39.2

[PATCH AUTOSEL 5.4 13/27] media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]

Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.

This causes a memory leak just by repeatedly plugging and
unplugging the device.

Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().

Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c
index 3198f9624b7c0..46bb0ccaafc1f 100644
--- a/drivers/media/usb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c
@@ -1551,8 +1551,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec)
 	dvb_dmx_release(&dec->demux);
 	if (dec->fe) {
 		dvb_unregister_frontend(dec->fe);
-		if (dec->fe->ops.release)
-			dec->fe->ops.release(dec->fe);
+		dvb_frontend_detach(dec->fe);
 	}
 	dvb_unregister_adapter(&dec->adapter);
 }
-- 
2.39.2

[PATCH AUTOSEL 5.4 14/27] media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]

The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:

  drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]

Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/mn88443x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/mn88443x.c b/drivers/media/dvb-frontends/mn88443x.c
index fff212c0bf3b5..05894deb8a19a 100644
--- a/drivers/media/dvb-frontends/mn88443x.c
+++ b/drivers/media/dvb-frontends/mn88443x.c
@@ -800,7 +800,7 @@ MODULE_DEVICE_TABLE(i2c, mn88443x_i2c_id);
 static struct i2c_driver mn88443x_driver = {
 	.driver = {
 		.name = "mn88443x",
-		.of_match_table = of_match_ptr(mn88443x_of_match),
+		.of_match_table = mn88443x_of_match,
 	},
 	.probe    = mn88443x_probe,
 	.remove   = mn88443x_remove,
-- 
2.39.2

[PATCH AUTOSEL 5.4 15/27] media: dvb-core: Fix use-after-free due on race condition at dvb_net

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]

A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.

The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.

So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++---
 include/media/dvb_net.h          |  4 ++++
 2 files changed, 39 insertions(+), 3 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index 9fed06ba88efb..ccaaabaaeb571 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -1564,15 +1564,43 @@ static long dvb_net_ioctl(struct file *file,
 	return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl);
 }
 
+static int locked_dvb_net_open(struct inode *inode, struct file *file)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_net *dvbnet = dvbdev->priv;
+	int ret;
+
+	if (mutex_lock_interruptible(&dvbnet->remove_mutex))
+		return -ERESTARTSYS;
+
+	if (dvbnet->exit) {
+		mutex_unlock(&dvbnet->remove_mutex);
+		return -ENODEV;
+	}
+
+	ret = dvb_generic_open(inode, file);
+
+	mutex_unlock(&dvbnet->remove_mutex);
+
+	return ret;
+}
+
 static int dvb_net_close(struct inode *inode, struct file *file)
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_net *dvbnet = dvbdev->priv;
 
+	mutex_lock(&dvbnet->remove_mutex);
+
 	dvb_generic_release(inode, file);
 
-	if(dvbdev->users == 1 && dvbnet->exit == 1)
+	if (dvbdev->users == 1 && dvbnet->exit == 1) {
+		mutex_unlock(&dvbnet->remove_mutex);
 		wake_up(&dvbdev->wait_queue);
+	} else {
+		mutex_unlock(&dvbnet->remove_mutex);
+	}
+
 	return 0;
 }
 
@@ -1580,7 +1608,7 @@ static int dvb_net_close(struct inode *inode, struct file *file)
 static const struct file_operations dvb_net_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = dvb_net_ioctl,
-	.open =	dvb_generic_open,
+	.open =	locked_dvb_net_open,
 	.release = dvb_net_close,
 	.llseek = noop_llseek,
 };
@@ -1599,10 +1627,13 @@ void dvb_net_release (struct dvb_net *dvbnet)
 {
 	int i;
 
+	mutex_lock(&dvbnet->remove_mutex);
 	dvbnet->exit = 1;
+	mutex_unlock(&dvbnet->remove_mutex);
+
 	if (dvbnet->dvbdev->users < 1)
 		wait_event(dvbnet->dvbdev->wait_queue,
-				dvbnet->dvbdev->users==1);
+				dvbnet->dvbdev->users == 1);
 
 	dvb_unregister_device(dvbnet->dvbdev);
 
@@ -1621,6 +1652,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet,
 	int i;
 
 	mutex_init(&dvbnet->ioctl_mutex);
+	mutex_init(&dvbnet->remove_mutex);
 	dvbnet->demux = dmx;
 
 	for (i=0; i<DVB_NET_DEVICES_MAX; i++)
diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h
index 5e31d37f25fac..cc01dffcc9f35 100644
--- a/include/media/dvb_net.h
+++ b/include/media/dvb_net.h
@@ -41,6 +41,9 @@
  * @exit:		flag to indicate when the device is being removed.
  * @demux:		pointer to &struct dmx_demux.
  * @ioctl_mutex:	protect access to this struct.
+ * @remove_mutex:	mutex that avoids a race condition between a callback
+ *			called when the hardware is disconnected and the
+ *			file_operations of dvb_net.
  *
  * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network
  * devices.
@@ -53,6 +56,7 @@ struct dvb_net {
 	unsigned int exit:1;
 	struct dmx_demux *demux;
 	struct mutex ioctl_mutex;
+	struct mutex remove_mutex;
 };
 
 /**
-- 
2.39.2

[PATCH AUTOSEL 5.4 16/27] media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]

Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
  do not call blocking ops when !TASK_RUNNING; state=1 set at
  prepare_to_wait_event+0x6d/0x690

For avoiding the potential deadlock, rewrite to an open-coded loop
instead.  Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.

CVE-2023-31084 was assigned to this bug.

Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/

Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index b04638321b75b..ad3e42a4eaf73 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -292,14 +292,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe,
 	}
 
 	if (events->eventw == events->eventr) {
-		int ret;
+		struct wait_queue_entry wait;
+		int ret = 0;
 
 		if (flags & O_NONBLOCK)
 			return -EWOULDBLOCK;
 
-		ret = wait_event_interruptible(events->wait_queue,
-					       dvb_frontend_test_event(fepriv, events));
-
+		init_waitqueue_entry(&wait, current);
+		add_wait_queue(&events->wait_queue, &wait);
+		while (!dvb_frontend_test_event(fepriv, events)) {
+			wait_woken(&wait, TASK_INTERRUPTIBLE, 0);
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+		}
+		remove_wait_queue(&events->wait_queue, &wait);
 		if (ret < 0)
 			return ret;
 	}
-- 
2.39.2

[PATCH AUTOSEL 5.4 17/27] media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221

[Sasha Levin]

From: Hyunwoo Kim <v4bel@theori.io>

[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]

If the device node of dvb_ca_en50221 is open() and the
device is disconnected, a UAF may occur when calling
close() on the device node.

The root cause is that wake_up() and wait_event() for
dvbdev->wait_queue are not implemented.

So implement wait_event() function in dvb_ca_en50221_release()
and add 'remove_mutex' which prevents race condition
for 'ca->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c | 37 ++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index b1a7b5f8b9aa4..dec036e0336cb 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -151,6 +151,12 @@ struct dvb_ca_private {
 
 	/* mutex serializing ioctls */
 	struct mutex ioctl_mutex;
+
+	/* A mutex used when a device is disconnected */
+	struct mutex remove_mutex;
+
+	/* Whether the device is disconnected */
+	int exit;
 };
 
 static void dvb_ca_private_free(struct dvb_ca_private *ca)
@@ -1708,12 +1714,22 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
-	if (!try_module_get(ca->pub->owner))
+	mutex_lock(&ca->remove_mutex);
+
+	if (ca->exit) {
+		mutex_unlock(&ca->remove_mutex);
+		return -ENODEV;
+	}
+
+	if (!try_module_get(ca->pub->owner)) {
+		mutex_unlock(&ca->remove_mutex);
 		return -EIO;
+	}
 
 	err = dvb_generic_open(inode, file);
 	if (err < 0) {
 		module_put(ca->pub->owner);
+		mutex_unlock(&ca->remove_mutex);
 		return err;
 	}
 
@@ -1738,6 +1754,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dvb_ca_private_get(ca);
 
+	mutex_unlock(&ca->remove_mutex);
 	return 0;
 }
 
@@ -1757,6 +1774,8 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+
 	/* mark the CA device as closed */
 	ca->open = 0;
 	dvb_ca_en50221_thread_update_delay(ca);
@@ -1767,6 +1786,13 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dvb_ca_private_put(ca);
 
+	if (dvbdev->users == 1 && ca->exit == 1) {
+		mutex_unlock(&ca->remove_mutex);
+		wake_up(&dvbdev->wait_queue);
+	} else {
+		mutex_unlock(&ca->remove_mutex);
+	}
+
 	return err;
 }
 
@@ -1890,6 +1916,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 	}
 
 	mutex_init(&ca->ioctl_mutex);
+	mutex_init(&ca->remove_mutex);
 
 	if (signal_pending(current)) {
 		ret = -EINTR;
@@ -1932,6 +1959,14 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+	ca->exit = 1;
+	mutex_unlock(&ca->remove_mutex);
+
+	if (ca->dvbdev->users < 1)
+		wait_event(ca->dvbdev->wait_queue,
+				ca->dvbdev->users == 1);
+
 	/* shutdown the thread if there was one */
 	kthread_stop(ca->thread);
 
-- 
2.39.2

[PATCH AUTOSEL 5.4 18/27] wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value

[Sasha Levin]

From: Yun Lu <luyun@kylinos.cn>

[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]

When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.

To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.

Signed-off-by: Yun Lu <luyun@kylinos.cn>
Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h      | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 2a02d4d72dec9..b7da89ba1e7d5 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1255,6 +1255,7 @@ struct rtl8xxxu_priv {
 	u32 rege9c;
 	u32 regeb4;
 	u32 regebc;
+	u32 regrcr;
 	int next_mbox;
 	int nr_out_eps;
 
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index bdccc84278d85..2648b30aab76a 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4048,6 +4048,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
 		RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
 	rtl8xxxu_write32(priv, REG_RCR, val32);
+	priv->regrcr = val32;
 
 	/*
 	 * Accept all multicast
@@ -5585,7 +5586,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 				      unsigned int *total_flags, u64 multicast)
 {
 	struct rtl8xxxu_priv *priv = hw->priv;
-	u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
+	u32 rcr = priv->regrcr;
 
 	dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
 		__func__, changed_flags, *total_flags);
@@ -5631,6 +5632,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 	 */
 
 	rtl8xxxu_write32(priv, REG_RCR, rcr);
+	priv->regrcr = rcr;
 
 	*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
 			 FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
-- 
2.39.2

[PATCH AUTOSEL 5.4 19/27] ARM: dts: stm32: add pin map for CAN controller on stm32f7

[Sasha Levin]

From: Dario Binacchi <dario.binacchi@amarulasolutions.com>

[ Upstream commit 011644249686f2675e142519cd59e81e04cfc231 ]

Add pin configurations for using CAN controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 82 ++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9314128df1859..639a6b65749f2 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -284,6 +284,88 @@ pins2 {
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
-- 
2.39.2

[PATCH AUTOSEL 5.4 20/27] ARM: dts: stm32: add CAN support on stm32f746

[Sasha Levin]

From: Dario Binacchi <dario.binacchi@amarulasolutions.com>

[ Upstream commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 ]

Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The
chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral
configuration and CAN3 in single peripheral configuration:
- Dual CAN peripheral configuration:
  * CAN1: Primary bxCAN for managing the communication between a secondary
    bxCAN and the 512-byte SRAM memory.
  * CAN2: Secondary bxCAN with no direct access to the SRAM memory.
  This means that the two bxCAN cells share the 512-byte SRAM memory and
  CAN2 can't be used without enabling CAN1.
- Single CAN peripheral configuration:
  * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
    512-byte SRAM memory.

 -------------------------------------------------------------------------
| features | CAN1              | CAN2               | CAN 3               |
 -------------------------------------------------------------------------
| SRAM     | 512-byte shared between CAN1 & CAN2    | 512-byte            |
 -------------------------------------------------------------------------
| Filters  | 26 filters shared between CAN1 & CAN2  | 14 filters          |
 -------------------------------------------------------------------------

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f746.dtsi | 47 ++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 60680fcf8eb3d..8dd7b68960032 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -306,6 +306,23 @@ rtc: rtc@40002800 {
 			status = "disabled";
 		};
 
+		can3: can@40003400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40003400 0x200>;
+			interrupts = <104>, <105>, <106>, <107>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+			st,gcan = <&gcan3>;
+			status = "disabled";
+		};
+
+		gcan3: gcan@40003600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40003600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -386,6 +403,36 @@ i2c4: i2c@40006000 {
 			status = "disabled";
 		};
 
+		can1: can@40006400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006400 0x200>;
+			interrupts = <19>, <20>, <21>, <22>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN1)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
+			st,can-primary;
+			st,gcan = <&gcan1>;
+			status = "disabled";
+		};
+
+		gcan1: gcan@40006600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40006600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
+		};
+
+		can2: can@40006800 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006800 0x200>;
+			interrupts = <63>, <64>, <65>, <66>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN2)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>;
+			st,can-secondary;
+			st,gcan = <&gcan1>;
+			status = "disabled";
+		};
+
 		cec: cec@40006c00 {
 			compatible = "st,stm32-cec";
 			reg = <0x40006C00 0x400>;
-- 
2.39.2

[PATCH AUTOSEL 5.4 21/27] arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

[Sasha Levin]

From: Min-Hua Chen <minhuadotchen@gmail.com>

[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]

This patch fixes several sparse warnings for fault.c:

arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:493:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:493:24: sparse:    got int
arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:501:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:501:32: sparse:    got int
arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:503:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:503:32: sparse:    got int
arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:511:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:511:24: sparse:    got int
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230502151909.128810-1-minhuadotchen@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/fault.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index a8e9c98147a19..af9a6e1fa0d3d 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -403,8 +403,8 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re
 	}
 }
 
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
 
 static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr,
 			   unsigned int mm_flags, unsigned long vm_flags)
-- 
2.39.2

[PATCH AUTOSEL 5.4 22/27] scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed

[Sasha Levin]

From: Wenchao Hao <haowenchao2@huawei.com>

[ Upstream commit 09e797c8641f6ad435c33ae24c223351197ea29a ]

If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target,
scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would
be requeued. The timeout of this request would not fire, no one would
increase iodone_cnt.

The above flow would result the iodone_cnt smaller than iorequest_cnt.  So
decrease the iorequest_cnt if dispatch failed to workaround the issue.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com
Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_lib.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 490d6c72d8bd6..8d05faf95ac3b 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1534,6 +1534,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		 */
 		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
 			"queuecommand : device blocked\n"));
+		atomic_dec(&cmd->device->iorequest_cnt);
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
@@ -1566,6 +1567,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 	trace_scsi_dispatch_cmd_start(cmd);
 	rtn = host->hostt->queuecommand(host, cmd);
 	if (rtn) {
+		atomic_dec(&cmd->device->iorequest_cnt);
 		trace_scsi_dispatch_cmd_error(cmd, rtn);
 		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
 		    rtn != SCSI_MLQUEUE_TARGET_BUSY)
-- 
2.39.2

[PATCH AUTOSEL 5.4 23/27] wifi: b43: fix incorrect __packed annotation

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]

clang warns about an unpacked structure inside of a packed one:

drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]

The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.

As Michael noted, the same problem is present in b43legacy, so
change both at the same time.

Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/b43.h             | 2 +-
 drivers/net/wireless/broadcom/b43legacy/b43legacy.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
index 9fc7c088a539e..67b4bac048e58 100644
--- a/drivers/net/wireless/broadcom/b43/b43.h
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -651,7 +651,7 @@ struct b43_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;
 
 
diff --git a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
index 6b0cec467938f..f49365d14619f 100644
--- a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
@@ -379,7 +379,7 @@ struct b43legacy_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;
 
 #define B43legacy_PHYMODE(phytype)	(1 << (phytype))
-- 
2.39.2

[PATCH AUTOSEL 5.4 24/27] netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 4747daf901e71..c1c24b5a43bc4 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2712,7 +2712,9 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
 	return -1;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const union nf_inet_addr any_addr;
+#endif
 
 static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
 {
@@ -3212,10 +3214,12 @@ ctnetlink_change_expect(struct nf_conntrack_expect *x,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
 	[CTA_EXPECT_NAT_DIR]	= { .type = NLA_U32 },
 	[CTA_EXPECT_NAT_TUPLE]	= { .type = NLA_NESTED },
 };
+#endif
 
 static int
 ctnetlink_parse_expect_nat(const struct nlattr *attr,
-- 
2.39.2

[PATCH AUTOSEL 5.4 25/27] ALSA: oss: avoid missing-prototype warnings

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]

Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:

sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]

Avoid this by making the prototypes unconditional.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_plugin.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h
index 8d2f7a4e3ab67..0e1c8cae6c5bd 100644
--- a/sound/core/oss/pcm_plugin.h
+++ b/sound/core/oss/pcm_plugin.h
@@ -141,6 +141,14 @@ int snd_pcm_area_copy(const struct snd_pcm_channel_area *src_channel,
 
 void *snd_pcm_plug_buf_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t size);
 void snd_pcm_plug_buf_unlock(struct snd_pcm_substream *plug, void *ptr);
+#else
+
+static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
+static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
+static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
+
+#endif
+
 snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream,
 				     const char *ptr, snd_pcm_uframes_t size,
 				     int in_kernel);
@@ -151,14 +159,6 @@ snd_pcm_sframes_t snd_pcm_oss_writev3(struct snd_pcm_substream *substream,
 snd_pcm_sframes_t snd_pcm_oss_readv3(struct snd_pcm_substream *substream,
 				     void **bufs, snd_pcm_uframes_t frames);
 
-#else
-
-static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
-static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
-static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
-
-#endif
-
 #ifdef PLUGIN_DEBUG
 #define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args)
 #else
-- 
2.39.2

[PATCH AUTOSEL 5.4 26/27] atm: hide unused procfs functions

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/atm/resources.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/atm/resources.c b/net/atm/resources.c
index 889349c6d90db..04b2235c5c261 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -443,6 +443,7 @@ int atm_dev_ioctl(unsigned int cmd, void __user *arg, int compat)
 	return error;
 }
 
+#ifdef CONFIG_PROC_FS
 void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	mutex_lock(&atm_dev_mutex);
@@ -458,3 +459,4 @@ void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	return seq_list_next(v, &atm_devs, pos);
 }
+#endif
-- 
2.39.2

[PATCH AUTOSEL 5.4 27/27] mdio_bus: unhide mdio_bus_init prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]

mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:

drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]

Remove the #ifdef around the declaration to avoid the warning..

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/phy.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 80750783b5b0a..f0b4197cfe39c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1192,10 +1192,8 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
 				   const struct ethtool_link_ksettings *cmd);
 int phy_ethtool_nway_reset(struct net_device *ndev);
 
-#if IS_ENABLED(CONFIG_PHYLIB)
 int __init mdio_bus_init(void);
 void mdio_bus_exit(void);
-#endif
 
 /* Inline function for use within net/core/ethtool.c (built-in) */
 static inline int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
-- 
2.39.2