[PATCH AUTOSEL 4.14 01/20] ASoC: dwc: limit the number of overrun messages

[PATCH AUTOSEL 4.14 01/20] ASoC: dwc: limit the number of overrun messages

[Sasha Levin]

From: Maxim Kochetkov <fido_max@inbox.ru>

[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]

On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/dwc/dwc-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c
index e27e21f8569a0..e6a0ec3c0e764 100644
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -132,13 +132,13 @@ static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_TXFO) {
-			dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "TX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_RXFO) {
-			dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "RX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 	}
-- 
2.39.2

[PATCH AUTOSEL 4.14 02/20] ASoC: ssm2602: Add workaround for playback distortions

[Sasha Levin]

From: Paweł Anikiel <pan@semihalf.com>

[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]

Apply a workaround for what appears to be a hardware quirk.

The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.

This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).

Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
        i2cset -y 0 0x1a $(($1*2)) $2
}

For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x87 # out, dac
  ssmset 0x06 0x07 # chip
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  (enable MCLK)
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x06 0x1f # chip
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  ssmset 0x06 0x07 # dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  ssmset 0x06 0x07 # out
  NOT OK

For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  (enable MCLK after reset)
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  NOT OK

  ssmset 0x06 0x07 # chip, out, dac
  NOT OK

Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/ssm2602.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 5e80867d09ef7..256e5af6690b7 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -67,6 +67,18 @@ static const struct reg_default ssm2602_reg[SSM2602_CACHEREGNUM] = {
 	{ .reg = 0x09, .def = 0x0000 }
 };
 
+/*
+ * ssm2602 register patch
+ * Workaround for playback distortions after power up: activates digital
+ * core, and then powers on output, DAC, and whole chip at the same time
+ */
+
+static const struct reg_sequence ssm2602_patch[] = {
+	{ SSM2602_ACTIVE, 0x01 },
+	{ SSM2602_PWR,    0x07 },
+	{ SSM2602_RESET,  0x00 },
+};
+
 
 /*Appending several "None"s just for OSS mixer use*/
 static const char *ssm2602_input_select[] = {
@@ -577,6 +589,9 @@ static int ssm260x_codec_probe(struct snd_soc_codec *codec)
 		return ret;
 	}
 
+	regmap_register_patch(ssm2602->regmap, ssm2602_patch,
+			      ARRAY_SIZE(ssm2602_patch));
+
 	/* set the update bits */
 	regmap_update_bits(ssm2602->regmap, SSM2602_LINVOL,
 			    LINVOL_LRIN_BOTH, LINVOL_LRIN_BOTH);
-- 
2.39.2

[PATCH AUTOSEL 4.14 03/20] media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]

In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.

Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/az6027.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index f2b5ba1d28098..05988c5ce63ca 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -991,6 +991,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			/* write/read request */
 			if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
 				req = 0xB9;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (msg[i].len << 8);
 				length = msg[i + 1].len + 6;
@@ -1004,6 +1008,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 
 				/* demod 16bit addr */
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (2 << 8);
 				length = msg[i].len - 2;
@@ -1029,6 +1037,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			} else {
 
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = msg[i].buf[0] & 0x00FF;
 				value = msg[i].addr + (1 << 8);
 				length = msg[i].len - 1;
-- 
2.39.2

[PATCH AUTOSEL 4.14 04/20] media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]

In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/ec168.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c
index 1db8aeef36553..19605958501e1 100644
--- a/drivers/media/usb/dvb-usb-v2/ec168.c
+++ b/drivers/media/usb/dvb-usb-v2/ec168.c
@@ -125,6 +125,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	while (i < num) {
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = READ_DEMOD;
 				req.value = 0;
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */
@@ -141,6 +145,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			}
 		} else {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_DEMOD;
 				req.value = msg[i].buf[1]; /* val */
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */
@@ -149,6 +157,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = ec168_ctrl_msg(d, &req);
 				i += 1;
 			} else {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_I2C;
 				req.value = msg[i].buf[0]; /* val */
 				req.index = 0x0100 + msg[i].addr; /* I2C addr */
-- 
2.39.2

[PATCH AUTOSEL 4.14 05/20] media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]

In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/ce6230.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/ce6230.c b/drivers/media/usb/dvb-usb-v2/ce6230.c
index e596031a708d0..80a07aab3b4b0 100644
--- a/drivers/media/usb/dvb-usb-v2/ce6230.c
+++ b/drivers/media/usb/dvb-usb-v2/ce6230.c
@@ -111,6 +111,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_READ;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];
@@ -127,6 +131,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		} else {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_WRITE;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];
-- 
2.39.2

[PATCH AUTOSEL 4.14 06/20] media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer

[Sasha Levin]

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]

In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index bfce2d6addf7e..5c0ad2dc315a5 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -189,6 +189,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1 || msg[1].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
 				/* return demod page from driver cache */
@@ -202,6 +206,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if (msg[0].len < 2) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_RD;
@@ -230,8 +238,16 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
+				if (msg[0].len < 2) {
+					ret = -EOPNOTSUPP;
+					goto err_mutex_unlock;
+				}
 				/* save demod page for later demod access */
 				dev->page = msg[0].buf[1];
 				ret = 0;
@@ -244,6 +260,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if ((msg[0].len < 23) && (!dev->new_i2c_write)) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_WR;
-- 
2.39.2

[PATCH AUTOSEL 4.14 07/20] media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]

In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/digitv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 20d33f0544ed2..0e2cffa946f69 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -66,6 +66,10 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
 
 	for (i = 0; i < num; i++) {
+		if (msg[i].len < 1) {
+			i = -EOPNOTSUPP;
+			break;
+		}
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
 			if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0,
-- 
2.39.2

[PATCH AUTOSEL 4.14 08/20] media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]

In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.

Fix this error by returning a negative value if message execution fails.

Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dw2102.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 98770a95721b9..2c9c4432a0e65 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -951,7 +951,7 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 	for (i = 0; i < 6; i++) {
 		obuf[1] = 0xf0 + i;
 		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
+			return -1;
 		else
 			mac[i] = ibuf[0];
 	}
-- 
2.39.2

[PATCH AUTOSEL 4.14 09/20] media: netup_unidvb: fix irq init by register it at the end of probe

[Sasha Levin]

From: Wei Chen <harperchen1110@gmail.com>

[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]

IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.

Spinlock dma->lock and i2c->lock suffer from the same problem.

Fix this by registering the irq at the end of probe.

Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/pci/netup_unidvb/netup_unidvb_core.c  | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 03239fba87bf2..0da29f085c10f 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -897,12 +897,7 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		ndev->lmmio0, (u32)pci_resource_len(pci_dev, 0),
 		ndev->lmmio1, (u32)pci_resource_len(pci_dev, 1),
 		pci_dev->irq);
-	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
-			"netup_unidvb", pci_dev) < 0) {
-		dev_err(&pci_dev->dev,
-			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
-		goto irq_request_err;
-	}
+
 	ndev->dma_size = 2 * 188 *
 		NETUP_DMA_BLOCKS_COUNT * NETUP_DMA_PACKETS_COUNT;
 	ndev->dma_virt = dma_alloc_coherent(&pci_dev->dev,
@@ -943,6 +938,14 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n");
 		goto dma_setup_err;
 	}
+
+	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
+			"netup_unidvb", pci_dev) < 0) {
+		dev_err(&pci_dev->dev,
+			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
+		goto dma_setup_err;
+	}
+
 	dev_info(&pci_dev->dev,
 		"netup_unidvb: device has been initialized\n");
 	return 0;
@@ -961,8 +964,6 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 	dma_free_coherent(&pci_dev->dev, ndev->dma_size,
 			ndev->dma_virt, ndev->dma_phys);
 dma_alloc_err:
-	free_irq(pci_dev->irq, pci_dev);
-irq_request_err:
 	iounmap(ndev->lmmio1);
 pci_bar1_error:
 	iounmap(ndev->lmmio0);
-- 
2.39.2

Re: [PATCH AUTOSEL 4.14 09/20] media: netup_unidvb: fix irq init by register it at the end of probe

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1503 bytes --]

Hi!

> [ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]
> 
> IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
> is initialized in netup_spi_init(). However, irq handler is registered
> before initializing the lock.
> 
> Spinlock dma->lock and i2c->lock suffer from the same problem.
> 
> Fix this by registering the irq at the end of probe.

Are you sure you got the error handling right? AFAICT
netup_unidvb_dma_fini(ndev, 0/1); is needed here.

Best regards,
								Pavel

> +++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
> @@ -943,6 +938,14 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
>  		dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n");
>  		goto dma_setup_err;
>  	}
> +
> +	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
> +			"netup_unidvb", pci_dev) < 0) {
> +		dev_err(&pci_dev->dev,
> +			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
> +		goto dma_setup_err;
> +	}
> +
>  	dev_info(&pci_dev->dev,
>  		"netup_unidvb: device has been initialized\n");
>  	return 0;
> @@ -961,8 +964,6 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
>  	dma_free_coherent(&pci_dev->dev, ndev->dma_size,
>  			ndev->dma_virt, ndev->dma_phys);
>  dma_alloc_err:
> -	free_irq(pci_dev->irq, pci_dev);
> -irq_request_err:
>  	iounmap(ndev->lmmio1);
>  pci_bar1_error:
>  	iounmap(ndev->lmmio0);

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH AUTOSEL 4.14 10/20] media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]

Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.

This causes a memory leak just by repeatedly plugging and
unplugging the device.

Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().

Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c
index cad2746158160..d41ba80881759 100644
--- a/drivers/media/usb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c
@@ -1571,8 +1571,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec)
 	dvb_dmx_release(&dec->demux);
 	if (dec->fe) {
 		dvb_unregister_frontend(dec->fe);
-		if (dec->fe->ops.release)
-			dec->fe->ops.release(dec->fe);
+		dvb_frontend_detach(dec->fe);
 	}
 	dvb_unregister_adapter(&dec->adapter);
 }
-- 
2.39.2

[PATCH AUTOSEL 4.14 11/20] media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]

Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
  do not call blocking ops when !TASK_RUNNING; state=1 set at
  prepare_to_wait_event+0x6d/0x690

For avoiding the potential deadlock, rewrite to an open-coded loop
instead.  Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.

CVE-2023-31084 was assigned to this bug.

Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/

Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index e3a4a4688c2ec..651234584eb2c 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -301,14 +301,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe,
 	}
 
 	if (events->eventw == events->eventr) {
-		int ret;
+		struct wait_queue_entry wait;
+		int ret = 0;
 
 		if (flags & O_NONBLOCK)
 			return -EWOULDBLOCK;
 
-		ret = wait_event_interruptible(events->wait_queue,
-					       dvb_frontend_test_event(fepriv, events));
-
+		init_waitqueue_entry(&wait, current);
+		add_wait_queue(&events->wait_queue, &wait);
+		while (!dvb_frontend_test_event(fepriv, events)) {
+			wait_woken(&wait, TASK_INTERRUPTIBLE, 0);
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+		}
+		remove_wait_queue(&events->wait_queue, &wait);
 		if (ret < 0)
 			return ret;
 	}
-- 
2.39.2

[PATCH AUTOSEL 4.14 12/20] media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221

[Sasha Levin]

From: Hyunwoo Kim <v4bel@theori.io>

[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]

If the device node of dvb_ca_en50221 is open() and the
device is disconnected, a UAF may occur when calling
close() on the device node.

The root cause is that wake_up() and wait_event() for
dvbdev->wait_queue are not implemented.

So implement wait_event() function in dvb_ca_en50221_release()
and add 'remove_mutex' which prevents race condition
for 'ca->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c | 37 ++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index 56114d85510f5..5dc8b2d143520 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -161,6 +161,12 @@ struct dvb_ca_private {
 
 	/* mutex serializing ioctls */
 	struct mutex ioctl_mutex;
+
+	/* A mutex used when a device is disconnected */
+	struct mutex remove_mutex;
+
+	/* Whether the device is disconnected */
+	int exit;
 };
 
 static void dvb_ca_private_free(struct dvb_ca_private *ca)
@@ -1713,12 +1719,22 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
-	if (!try_module_get(ca->pub->owner))
+	mutex_lock(&ca->remove_mutex);
+
+	if (ca->exit) {
+		mutex_unlock(&ca->remove_mutex);
+		return -ENODEV;
+	}
+
+	if (!try_module_get(ca->pub->owner)) {
+		mutex_unlock(&ca->remove_mutex);
 		return -EIO;
+	}
 
 	err = dvb_generic_open(inode, file);
 	if (err < 0) {
 		module_put(ca->pub->owner);
+		mutex_unlock(&ca->remove_mutex);
 		return err;
 	}
 
@@ -1743,6 +1759,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dvb_ca_private_get(ca);
 
+	mutex_unlock(&ca->remove_mutex);
 	return 0;
 }
 
@@ -1762,6 +1779,8 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+
 	/* mark the CA device as closed */
 	ca->open = 0;
 	dvb_ca_en50221_thread_update_delay(ca);
@@ -1772,6 +1791,13 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dvb_ca_private_put(ca);
 
+	if (dvbdev->users == 1 && ca->exit == 1) {
+		mutex_unlock(&ca->remove_mutex);
+		wake_up(&dvbdev->wait_queue);
+	} else {
+		mutex_unlock(&ca->remove_mutex);
+	}
+
 	return err;
 }
 
@@ -1896,6 +1922,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 	}
 
 	mutex_init(&ca->ioctl_mutex);
+	mutex_init(&ca->remove_mutex);
 
 	if (signal_pending(current)) {
 		ret = -EINTR;
@@ -1939,6 +1966,14 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+	ca->exit = 1;
+	mutex_unlock(&ca->remove_mutex);
+
+	if (ca->dvbdev->users < 1)
+		wait_event(ca->dvbdev->wait_queue,
+				ca->dvbdev->users == 1);
+
 	/* shutdown the thread if there was one */
 	kthread_stop(ca->thread);
 
-- 
2.39.2

[PATCH AUTOSEL 4.14 13/20] wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value

[Sasha Levin]

From: Yun Lu <luyun@kylinos.cn>

[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]

When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.

To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.

Signed-off-by: Yun Lu <luyun@kylinos.cn>
Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h      | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index c1163f2a09251..1913b51c1e809 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1268,6 +1268,7 @@ struct rtl8xxxu_priv {
 	u32 rege9c;
 	u32 regeb4;
 	u32 regebc;
+	u32 regrcr;
 	int next_mbox;
 	int nr_out_eps;
 
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 1c9f7e1f63cfd..bfd704b17a447 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4051,6 +4051,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
 		RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
 	rtl8xxxu_write32(priv, REG_RCR, val32);
+	priv->regrcr = val32;
 
 	/*
 	 * Accept all multicast
@@ -5591,7 +5592,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 				      unsigned int *total_flags, u64 multicast)
 {
 	struct rtl8xxxu_priv *priv = hw->priv;
-	u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
+	u32 rcr = priv->regrcr;
 
 	dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
 		__func__, changed_flags, *total_flags);
@@ -5637,6 +5638,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 	 */
 
 	rtl8xxxu_write32(priv, REG_RCR, rcr);
+	priv->regrcr = rcr;
 
 	*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
 			 FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
-- 
2.39.2

[PATCH AUTOSEL 4.14 14/20] arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

[Sasha Levin]

From: Min-Hua Chen <minhuadotchen@gmail.com>

[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]

This patch fixes several sparse warnings for fault.c:

arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:493:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:493:24: sparse:    got int
arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:501:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:501:32: sparse:    got int
arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:503:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:503:32: sparse:    got int
arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:511:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:511:24: sparse:    got int
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230502151909.128810-1-minhuadotchen@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/fault.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index d191b046d4c18..ef79263bb55f5 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -349,8 +349,8 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re
 		__do_kernel_fault(addr, esr, regs);
 }
 
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
 
 static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
 			   unsigned int mm_flags, unsigned long vm_flags,
-- 
2.39.2

[PATCH AUTOSEL 4.14 15/20] scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed

[Sasha Levin]

From: Wenchao Hao <haowenchao2@huawei.com>

[ Upstream commit 09e797c8641f6ad435c33ae24c223351197ea29a ]

If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target,
scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would
be requeued. The timeout of this request would not fire, no one would
increase iodone_cnt.

The above flow would result the iodone_cnt smaller than iorequest_cnt.  So
decrease the iorequest_cnt if dispatch failed to workaround the issue.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com
Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_lib.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fccda61e768c2..a2c13e437114e 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1717,6 +1717,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		 */
 		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
 			"queuecommand : device blocked\n"));
+		atomic_dec(&cmd->device->iorequest_cnt);
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
@@ -1749,6 +1750,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 	trace_scsi_dispatch_cmd_start(cmd);
 	rtn = host->hostt->queuecommand(host, cmd);
 	if (rtn) {
+		atomic_dec(&cmd->device->iorequest_cnt);
 		trace_scsi_dispatch_cmd_error(cmd, rtn);
 		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
 		    rtn != SCSI_MLQUEUE_TARGET_BUSY)
-- 
2.39.2

[PATCH AUTOSEL 4.14 16/20] wifi: b43: fix incorrect __packed annotation

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]

clang warns about an unpacked structure inside of a packed one:

drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]

The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.

As Michael noted, the same problem is present in b43legacy, so
change both at the same time.

Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/b43.h             | 2 +-
 drivers/net/wireless/broadcom/b43legacy/b43legacy.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
index b77d1a904f7e6..a449561fccf28 100644
--- a/drivers/net/wireless/broadcom/b43/b43.h
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -651,7 +651,7 @@ struct b43_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;
 
 
diff --git a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
index 6b0cec467938f..f49365d14619f 100644
--- a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h
@@ -379,7 +379,7 @@ struct b43legacy_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;
 
 #define B43legacy_PHYMODE(phytype)	(1 << (phytype))
-- 
2.39.2

[PATCH AUTOSEL 4.14 17/20] netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 733e61fc50433..1d0abd8529e62 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2531,7 +2531,9 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
 	return -1;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const union nf_inet_addr any_addr;
+#endif
 
 static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
 {
@@ -3031,10 +3033,12 @@ ctnetlink_change_expect(struct nf_conntrack_expect *x,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
 	[CTA_EXPECT_NAT_DIR]	= { .type = NLA_U32 },
 	[CTA_EXPECT_NAT_TUPLE]	= { .type = NLA_NESTED },
 };
+#endif
 
 static int
 ctnetlink_parse_expect_nat(const struct nlattr *attr,
-- 
2.39.2

[PATCH AUTOSEL 4.14 18/20] ALSA: oss: avoid missing-prototype warnings

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]

Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:

sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]

Avoid this by making the prototypes unconditional.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_plugin.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h
index c9cd29d86efda..64a2057aa0610 100644
--- a/sound/core/oss/pcm_plugin.h
+++ b/sound/core/oss/pcm_plugin.h
@@ -156,6 +156,14 @@ int snd_pcm_area_copy(const struct snd_pcm_channel_area *src_channel,
 
 void *snd_pcm_plug_buf_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t size);
 void snd_pcm_plug_buf_unlock(struct snd_pcm_substream *plug, void *ptr);
+#else
+
+static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
+static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
+static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
+
+#endif
+
 snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream,
 				     const char *ptr, snd_pcm_uframes_t size,
 				     int in_kernel);
@@ -166,14 +174,6 @@ snd_pcm_sframes_t snd_pcm_oss_writev3(struct snd_pcm_substream *substream,
 snd_pcm_sframes_t snd_pcm_oss_readv3(struct snd_pcm_substream *substream,
 				     void **bufs, snd_pcm_uframes_t frames);
 
-#else
-
-static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
-static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
-static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
-
-#endif
-
 #ifdef PLUGIN_DEBUG
 #define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args)
 #else
-- 
2.39.2

[PATCH AUTOSEL 4.14 19/20] atm: hide unused procfs functions

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/atm/resources.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/atm/resources.c b/net/atm/resources.c
index bada395ecdb18..9389080224f87 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -447,6 +447,7 @@ int atm_dev_ioctl(unsigned int cmd, void __user *arg, int compat)
 	return error;
 }
 
+#ifdef CONFIG_PROC_FS
 void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	mutex_lock(&atm_dev_mutex);
@@ -462,3 +463,4 @@ void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	return seq_list_next(v, &atm_devs, pos);
 }
+#endif
-- 
2.39.2

[PATCH AUTOSEL 4.14 20/20] mdio_bus: unhide mdio_bus_init prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]

mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:

drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]

Remove the #ifdef around the declaration to avoid the warning..

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/phy.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8b6850707e629..1c1cc2ec0a7fc 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -940,10 +940,8 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
 				   const struct ethtool_link_ksettings *cmd);
 int phy_ethtool_nway_reset(struct net_device *ndev);
 
-#if IS_ENABLED(CONFIG_PHYLIB)
 int __init mdio_bus_init(void);
 void mdio_bus_exit(void);
-#endif
 
 extern struct bus_type mdio_bus_type;
 
-- 
2.39.2

Re: [PATCH AUTOSEL 4.14 20/20] mdio_bus: unhide mdio_bus_init prototype

[Arnd Bergmann]

On Thu, May 25, 2023, at 20:45, Sasha Levin wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> [ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]
>
> mdio_bus_init() is either used as a local module_init() entry,
> or it gets called in phy_device.c. In the former case, there
> is no declaration, which causes a warning:
>
> drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 
> 'mdio_bus_init' [-Werror=missing-prototypes]
>
> Remove the #ifdef around the declaration to avoid the warning..

Hi Sasha,

While there is nothing wrong with backporting the -Wmissing-prototypes
warning fixes I sent, there is also really no point unless you
want to backport all 140 of them and then also turn on that warning
during testing.

The option is only enabled at the W=1 level or when using sparse (C=1).
I hope to get these all done in 6.5 for the most common architectures,
but I wouldn't bother putting them into stable kernels.

     Arnd

Re: [PATCH AUTOSEL 4.14 20/20] mdio_bus: unhide mdio_bus_init prototype

[Sasha Levin]

On Thu, May 25, 2023 at 10:05:01PM +0200, Arnd Bergmann wrote:
>On Thu, May 25, 2023, at 20:45, Sasha Levin wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> [ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]
>>
>> mdio_bus_init() is either used as a local module_init() entry,
>> or it gets called in phy_device.c. In the former case, there
>> is no declaration, which causes a warning:
>>
>> drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for
>> 'mdio_bus_init' [-Werror=missing-prototypes]
>>
>> Remove the #ifdef around the declaration to avoid the warning..
>
>Hi Sasha,
>
>While there is nothing wrong with backporting the -Wmissing-prototypes
>warning fixes I sent, there is also really no point unless you
>want to backport all 140 of them and then also turn on that warning
>during testing.
>
>The option is only enabled at the W=1 level or when using sparse (C=1).
>I hope to get these all done in 6.5 for the most common architectures,
>but I wouldn't bother putting them into stable kernels.

I'll go drop it. In general, we've been trying to avoid W=1 fixes but
sometimes they end up sneaking in, which is also okay...

-- 
Thanks,
Sasha