Re: [PATCH v2 5/8] media: i2c: ds90ub960: Allow FPD-Link async mode

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Tomi,

Thank you for the patch.

On Thu, Jul 20, 2023 at 01:30:36PM +0300, Tomi Valkeinen wrote:
> Allow using FPD-Link in async mode. The driver handles it correctly, but
> the mode was blocked at probe time as there wasn't HW to test this with.
> Now the mode has been tested, and it works.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/i2c/ds90ub960.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
> index a83091f47140..ea819fb6e99b 100644
> --- a/drivers/media/i2c/ds90ub960.c
> +++ b/drivers/media/i2c/ds90ub960.c
> @@ -3240,7 +3240,6 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv,
>  	switch (rx_mode) {
>  	case RXPORT_MODE_RAW12_HF:
>  	case RXPORT_MODE_RAW12_LF:
> -	case RXPORT_MODE_CSI2_ASYNC:
>  		dev_err(dev, "rx%u: unsupported 'ti,rx-mode' %u\n", nport,
>  			rx_mode);
>  		return -EINVAL;
> 

-- 
Regards,

Laurent Pinchart