From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>, <pierre-louis.bossart@linux.intel.com>,
<peter.ujfalusi@linux.intel.com>,
<yung-chuan.liao@linux.intel.com>
Cc: <kai.vehmanen@linux.intel.com>, <cezary.rojewski@intel.com>,
<ranjani.sridharan@linux.intel.com>,
<alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH v3] ASoC: Intel: soc-acpi-intel-tgl-match: add cs42l43 and cs35l56 support
Date: Mon, 4 Dec 2023 13:56:14 +0000 [thread overview]
Message-ID: <20231204135614.2169624-1-rf@opensource.cirrus.com> (raw)
From: Bard Liao <yung-chuan.liao@linux.intel.com>
This is a test configuration for UpExtreme with Cirrus Logic
CS35L56-EIGHT-C board.
The codec layout is configured as:
- Link3: CS42L43 Jack
- Link0: 2x CS35L56 Speaker (amps 1 and 2)
- Link1: 2x CS35L56 Speaker (amps 7 and 8)
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
Changes since V1:
- Changed ALSA prefixes for CS35L56 to 'AMPn'
- Renumbered the CS35L56 prefixes to match the numbering of the
OUTn speaker sockets on the EIGHT-C board
---
.../intel/common/soc-acpi-intel-tgl-match.c | 78 +++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
index 5804926c8b56..e5f721ba5ed4 100644
--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
@@ -41,6 +41,20 @@ static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
.group_id = 1,
};
+static const struct snd_soc_acpi_endpoint spk_2_endpoint = {
+ .num = 0,
+ .aggregated = 1,
+ .group_position = 2,
+ .group_id = 1,
+};
+
+static const struct snd_soc_acpi_endpoint spk_3_endpoint = {
+ .num = 0,
+ .aggregated = 1,
+ .group_position = 3,
+ .group_id = 1,
+};
+
static const struct snd_soc_acpi_endpoint rt712_endpoints[] = {
{
.num = 0,
@@ -400,6 +414,64 @@ static const struct snd_soc_acpi_link_adr tgl_712_only[] = {
{}
};
+static const struct snd_soc_acpi_adr_device cs42l43_3_adr[] = {
+ {
+ .adr = 0x00033001FA424301ull,
+ .num_endpoints = 1,
+ .endpoints = &single_endpoint,
+ .name_prefix = "cs42l43"
+ }
+};
+
+static const struct snd_soc_acpi_adr_device cs35l56_0_adr[] = {
+ {
+ .adr = 0x00003301FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_r_endpoint,
+ .name_prefix = "AMP1"
+ },
+ {
+ .adr = 0x00003201FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_3_endpoint,
+ .name_prefix = "AMP2"
+ }
+};
+
+static const struct snd_soc_acpi_adr_device cs35l56_1_adr[] = {
+ {
+ .adr = 0x00013701FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_l_endpoint,
+ .name_prefix = "AMP8"
+ },
+ {
+ .adr = 0x00013601FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_2_endpoint,
+ .name_prefix = "AMP7"
+ }
+};
+
+static const struct snd_soc_acpi_link_adr tgl_cs42l43_cs35l56[] = {
+ {
+ .mask = BIT(3),
+ .num_adr = ARRAY_SIZE(cs42l43_3_adr),
+ .adr_d = cs42l43_3_adr,
+ },
+ {
+ .mask = BIT(0),
+ .num_adr = ARRAY_SIZE(cs35l56_0_adr),
+ .adr_d = cs35l56_0_adr,
+ },
+ {
+ .mask = BIT(1),
+ .num_adr = ARRAY_SIZE(cs35l56_1_adr),
+ .adr_d = cs35l56_1_adr,
+ },
+ {}
+};
+
static const struct snd_soc_acpi_codecs tgl_max98373_amp = {
.num_codecs = 1,
.codecs = {"MX98373"}
@@ -494,6 +566,12 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_sdw_machines[] = {
.drv_name = "sof_sdw",
.sof_tplg_filename = "sof-tgl-rt715-rt711-rt1308-mono.tplg",
},
+ {
+ .link_mask = 0xB,
+ .links = tgl_cs42l43_cs35l56,
+ .drv_name = "sof_sdw",
+ .sof_tplg_filename = "sof-tgl-cs42l43-l3-cs35l56-l01.tplg",
+ },
{
.link_mask = 0xF, /* 4 active links required */
.links = tgl_3_in_1_default,
--
2.30.2
next reply other threads:[~2023-12-04 13:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-04 13:56 Richard Fitzgerald [this message]
2023-12-04 14:55 ` [PATCH v3] ASoC: Intel: soc-acpi-intel-tgl-match: add cs42l43 and cs35l56 support Pierre-Louis Bossart
2023-12-04 15:54 ` Richard Fitzgerald
2023-12-04 16:44 ` Pierre-Louis Bossart
2023-12-05 13:11 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231204135614.2169624-1-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox