Re: [PATCH v3] ASoC: Intel: soc-acpi-intel-tgl-match: add cs42l43 and cs35l56 support

[Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>]

On 12/4/23 07:56, Richard Fitzgerald wrote:
> From: Bard Liao <yung-chuan.liao@linux.intel.com>
> 
> This is a test configuration for UpExtreme with Cirrus Logic
> CS35L56-EIGHT-C board.
> 
> The codec layout is configured as:
>     - Link3: CS42L43 Jack
>     - Link0: 2x CS35L56 Speaker (amps 1 and 2)
>     - Link1: 2x CS35L56 Speaker (amps 7 and 8)
> 
> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
> ---
> Changes since V1:
> - Changed ALSA prefixes for CS35L56 to 'AMPn'
> - Renumbered the CS35L56 prefixes to match the numbering of the
>   OUTn speaker sockets on the EIGHT-C board
> ---
>  .../intel/common/soc-acpi-intel-tgl-match.c   | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 
> diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
> index 5804926c8b56..e5f721ba5ed4 100644
> --- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
> +++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c

> +static const struct snd_soc_acpi_adr_device cs35l56_0_adr[] = {
> +	{
> +		.adr = 0x00003301FA355601ull,
> +		.num_endpoints = 1,
> +		.endpoints = &spk_r_endpoint,
> +		.name_prefix = "AMP1"
> +	},
> +	{
> +		.adr = 0x00003201FA355601ull,
> +		.num_endpoints = 1,
> +		.endpoints = &spk_3_endpoint,
> +		.name_prefix = "AMP2"
> +	}
> +};
> +
> +static const struct snd_soc_acpi_adr_device cs35l56_1_adr[] = {
> +	{
> +		.adr = 0x00013701FA355601ull,
> +		.num_endpoints = 1,
> +		.endpoints = &spk_l_endpoint,
> +		.name_prefix = "AMP8"
> +	},
> +	{
> +		.adr = 0x00013601FA355601ull,
> +		.num_endpoints = 1,
> +		.endpoints = &spk_2_endpoint,
> +		.name_prefix = "AMP7"
> +	}
> +};

Don't we need the same change of name_prefix for
soc-acpi-intel-mtl-match.c? I see this in the existing code:

static const struct snd_soc_acpi_adr_device cs35l56_1_adr[] = {
	{
		.adr = 0x00013701FA355601ull,
		.num_endpoints = 1,
		.endpoints = &spk_r_endpoint,
		.name_prefix = "cs35l56-8"
	},
	{
		.adr = 0x00013601FA355601ull,
		.num_endpoints = 1,
		.endpoints = &spk_3_endpoint,
		.name_prefix = "cs35l56-7"
	}
};

static const struct snd_soc_acpi_adr_device cs35l56_2_adr[] = {
	{
		.adr = 0x00023301FA355601ull,
		.num_endpoints = 1,
		.endpoints = &spk_l_endpoint,
		.name_prefix = "cs35l56-1"
	},
	{
		.adr = 0x00023201FA355601ull,
		.num_endpoints = 1,
		.endpoints = &spk_2_endpoint,
		.name_prefix = "cs35l56-2"
	}
};