[PATCH AUTOSEL 6.6 01/47] hwtracing: hisi_ptt: Handle the interrupt in hardirq context

[PATCH AUTOSEL 6.6 01/47] hwtracing: hisi_ptt: Handle the interrupt in hardirq context

[Sasha Levin]

From: Yicong Yang <yangyicong@hisilicon.com>

[ Upstream commit e0dd27ad8af00f147ac3c9de88e0687986afc3ea ]

Handle the trace interrupt in the hardirq context, make sure the irq
core won't threaded it by declaring IRQF_NO_THREAD and userspace won't
balance it by declaring IRQF_NOBALANCING. Otherwise we may violate the
synchronization requirements of the perf core, referenced to the
change of arm-ccn PMU
  commit 0811ef7e2f54 ("bus: arm-ccn: fix PMU interrupt flags").

In the interrupt handler we mainly doing 2 things:
- Copy the data from the local DMA buffer to the AUX buffer
- Commit the data in the AUX buffer

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Fixed commit description to suppress checkpatch warning ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-3-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/ptt/hisi_ptt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index 49ea1b0f74890..7d2127d86c728 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -342,9 +342,9 @@ static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
 		return ret;
 
 	hisi_ptt->trace_irq = pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ);
-	ret = devm_request_threaded_irq(&pdev->dev, hisi_ptt->trace_irq,
-					NULL, hisi_ptt_isr, 0,
-					DRV_NAME, hisi_ptt);
+	ret = devm_request_irq(&pdev->dev, hisi_ptt->trace_irq, hisi_ptt_isr,
+				IRQF_NOBALANCING | IRQF_NO_THREAD, DRV_NAME,
+				hisi_ptt);
 	if (ret) {
 		pci_err(pdev, "failed to request irq %d, ret = %d\n",
 			hisi_ptt->trace_irq, ret);
-- 
2.42.0

[PATCH AUTOSEL 6.6 02/47] hwtracing: hisi_ptt: Don't try to attach a task

[Sasha Levin]

From: Yicong Yang <yangyicong@hisilicon.com>

[ Upstream commit aff787f64ad7cbb54614b51b82c682fe06411ef3 ]

PTT is an uncore PMU and shouldn't be attached to any task. Block
the usage in pmu::event_init().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-5-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/ptt/hisi_ptt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index 7d2127d86c728..1d066ce8358f0 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -1000,6 +1000,9 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event)
 		return -EOPNOTSUPP;
 	}
 
+	if (event->attach_state & PERF_ATTACH_TASK)
+		return -EOPNOTSUPP;
+
 	if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
 		return -ENOENT;
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 03/47] ASoC: amd: yc: Add HP 255 G10 into quirk table

[Sasha Levin]

From: Matus Malych <matus@malych.org>

[ Upstream commit 0c6498a59fbbcbf3d0a58c282dd6f0bca0eed92a ]

HP 255 G10's internal microphone array can be made
to work by adding it to the quirk table.

Signed-off-by: Matus Malych <matus@malych.org>
Link: https://lore.kernel.org/r/20231112165403.3221-1-matus@malych.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 15a864dcd7bd3..e2a510443bf1c 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -367,6 +367,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "8A3E"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "8B2F"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.42.0

[PATCH AUTOSEL 6.6 04/47] ASoC: wm8974: Correct boost mixer inputs

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 37e6fd0cebf0b9f71afb38fd95b10408799d1f0b ]

Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8974.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index 044b6f604c090..260bac695b20a 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -186,7 +186,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0),
 
 /* Boost mixer */
 static const struct snd_kcontrol_new wm8974_boost_mixer[] = {
-SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 1),
+SOC_DAPM_SINGLE("PGA Switch", WM8974_INPPGA, 6, 1, 1),
 };
 
 /* Input PGA */
@@ -246,8 +246,8 @@ static const struct snd_soc_dapm_route wm8974_dapm_routes[] = {
 
 	/* Boost Mixer */
 	{"ADC", NULL, "Boost Mixer"},
-	{"Boost Mixer", "Aux Switch", "Aux Input"},
-	{"Boost Mixer", NULL, "Input PGA"},
+	{"Boost Mixer", NULL, "Aux Input"},
+	{"Boost Mixer", "PGA Switch", "Input PGA"},
 	{"Boost Mixer", NULL, "MICP"},
 
 	/* Input PGA */
-- 
2.42.0

[PATCH AUTOSEL 6.6 05/47] arm64: dts: rockchip: fix rk356x pcie msg interrupt name

[Sasha Levin]

From: Heiko Stuebner <heiko@sntech.de>

[ Upstream commit 3cee9c635f27d1003d46f624d816f3455698b625 ]

The expected name by the binding at this position is "msg" and the SoC's
manual also calls the interrupt in question "msg", so fix the rk356x dtsi
to use the correct name.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231114153834.934978-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index abee88911982d..b7e2b475f0707 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -970,7 +970,7 @@ pcie2x1: pcie@fe260000 {
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		bus-range = <0x0 0xf>;
 		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
 			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
-- 
2.42.0

[PATCH AUTOSEL 6.6 06/47] ASoC: Intel: Skylake: Fix mem leak in few functions

[Sasha Levin]

From: Kamil Duljas <kamil.duljas@gmail.com>

[ Upstream commit d5c65be34df73fa01ed05611aafb73b440d89e29 ]

The resources should be freed when function return error.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/skylake/skl-pcm.c     | 4 +++-
 sound/soc/intel/skylake/skl-sst-ipc.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index ac3dc8c63c260..29a03ee3d7f73 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -252,8 +252,10 @@ static int skl_pcm_open(struct snd_pcm_substream *substream,
 	snd_pcm_set_sync(substream);
 
 	mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream);
-	if (!mconfig)
+	if (!mconfig) {
+		kfree(dma_params);
 		return -EINVAL;
+	}
 
 	skl_tplg_d0i3_get(skl, mconfig->d0i3_caps);
 
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c
index 7a425271b08b1..fd9624ad5f72b 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.c
+++ b/sound/soc/intel/skylake/skl-sst-ipc.c
@@ -1003,8 +1003,10 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc,
 
 	reply.size = (reply.header >> 32) & IPC_DATA_OFFSET_SZ_MASK;
 	buf = krealloc(reply.data, reply.size, GFP_KERNEL);
-	if (!buf)
+	if (!buf) {
+		kfree(reply.data);
 		return -ENOMEM;
+	}
 	*payload = buf;
 	*bytes = reply.size;
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 07/47] ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16

[Sasha Levin]

From: David Lin <CTLIN0@nuvoton.com>

[ Upstream commit c1501f2597dd08601acd42256a4b0a0fc36bf302 ]

This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:

sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/nau8822.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c
index ff3024899f456..7199d734c79f2 100644
--- a/sound/soc/codecs/nau8822.c
+++ b/sound/soc/codecs/nau8822.c
@@ -184,6 +184,7 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol,
 	struct soc_bytes_ext *params = (void *)kcontrol->private_value;
 	int i, reg;
 	u16 reg_val, *val;
+	__be16 tmp;
 
 	val = (u16 *)ucontrol->value.bytes.data;
 	reg = NAU8822_REG_EQ1;
@@ -192,8 +193,8 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol,
 		/* conversion of 16-bit integers between native CPU format
 		 * and big endian format
 		 */
-		reg_val = cpu_to_be16(reg_val);
-		memcpy(val + i, &reg_val, sizeof(reg_val));
+		tmp = cpu_to_be16(reg_val);
+		memcpy(val + i, &tmp, sizeof(tmp));
 	}
 
 	return 0;
@@ -216,6 +217,7 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol,
 	void *data;
 	u16 *val, value;
 	int i, reg, ret;
+	__be16 *tmp;
 
 	data = kmemdup(ucontrol->value.bytes.data,
 		params->max, GFP_KERNEL | GFP_DMA);
@@ -228,7 +230,8 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol,
 		/* conversion of 16-bit integers between native CPU format
 		 * and big endian format
 		 */
-		value = be16_to_cpu(*(val + i));
+		tmp = (__be16 *)(val + i);
+		value = be16_to_cpup(tmp);
 		ret = snd_soc_component_write(component, reg + i, value);
 		if (ret) {
 			dev_err(component->dev,
-- 
2.42.0

[PATCH AUTOSEL 6.6 08/47] ASoC: SOF: topology: Fix mem leak in sof_dai_load()

[Sasha Levin]

From: Kamil Duljas <kamil.duljas@gmail.com>

[ Upstream commit 31e721fbd194d5723722eaa21df1d14cee7e12b5 ]

The function has multiple return points at which it is not released
previously allocated memory.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c
index a3a3af252259d..37ec671a2d766 100644
--- a/sound/soc/sof/topology.c
+++ b/sound/soc/sof/topology.c
@@ -1736,8 +1736,10 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index,
 	/* perform pcm set op */
 	if (ipc_pcm_ops && ipc_pcm_ops->pcm_setup) {
 		ret = ipc_pcm_ops->pcm_setup(sdev, spcm);
-		if (ret < 0)
+		if (ret < 0) {
+			kfree(spcm);
 			return ret;
+		}
 	}
 
 	dai_drv->dobj.private = spcm;
-- 
2.42.0

[PATCH AUTOSEL 6.6 09/47] ASoC: Intel: Skylake: mem leak in skl register function

[Sasha Levin]

From: Kamil Duljas <kamil.duljas@gmail.com>

[ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ]

skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/skylake/skl-pcm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 29a03ee3d7f73..c602275fcf717 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -1473,6 +1473,7 @@ int skl_platform_register(struct device *dev)
 		dais = krealloc(skl->dais, sizeof(skl_fe_dai) +
 				sizeof(skl_platform_dai), GFP_KERNEL);
 		if (!dais) {
+			kfree(skl->dais);
 			ret = -ENOMEM;
 			goto err;
 		}
@@ -1485,8 +1486,10 @@ int skl_platform_register(struct device *dev)
 
 	ret = devm_snd_soc_register_component(dev, &skl_component,
 					 skl->dais, num_dais);
-	if (ret)
+	if (ret) {
+		kfree(skl->dais);
 		dev_err(dev, "soc component registration failed %d\n", ret);
+	}
 err:
 	return ret;
 }
-- 
2.42.0

[PATCH AUTOSEL 6.6 10/47] ASoC: cs43130: Fix the position of const qualifier

[Sasha Levin]

From: Maciej Strozek <mstrozek@opensource.cirrus.com>

[ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ]

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs43130.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c
index 3292405024bc0..778a62e57d456 100644
--- a/sound/soc/codecs/cs43130.c
+++ b/sound/soc/codecs/cs43130.c
@@ -1683,7 +1683,7 @@ static ssize_t hpload_dc_r_show(struct device *dev,
 	return cs43130_show_dc(dev, buf, HP_RIGHT);
 }
 
-static u16 const cs43130_ac_freq[CS43130_AC_FREQ] = {
+static const u16 cs43130_ac_freq[CS43130_AC_FREQ] = {
 	24,
 	43,
 	93,
@@ -2363,7 +2363,7 @@ static const struct regmap_config cs43130_regmap = {
 	.use_single_write	= true,
 };
 
-static u16 const cs43130_dc_threshold[CS43130_DC_THRESHOLD] = {
+static const u16 cs43130_dc_threshold[CS43130_DC_THRESHOLD] = {
 	50,
 	120,
 };
-- 
2.42.0

[PATCH AUTOSEL 6.6 11/47] ASoC: cs43130: Fix incorrect frame delay configuration

[Sasha Levin]

From: Maciej Strozek <mstrozek@opensource.cirrus.com>

[ Upstream commit aa7e8e5e4011571022dc06e4d7a2f108feb53d1a ]

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs43130.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c
index 778a62e57d456..206008bdecac3 100644
--- a/sound/soc/codecs/cs43130.c
+++ b/sound/soc/codecs/cs43130.c
@@ -579,7 +579,7 @@ static int cs43130_set_sp_fmt(int dai_id, unsigned int bitwidth_sclk,
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
 		hi_size = bitwidth_sclk;
-		frm_delay = 2;
+		frm_delay = 0;
 		frm_phase = 1;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
-- 
2.42.0

[PATCH AUTOSEL 6.6 12/47] ASoC: fsl_xcvr: Enable 2 * TX bit clock for spdif only case

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit c33fd110424dfcb544cf55a1b312f43fe1918235 ]

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_xcvr.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index fa0a15263c66d..77f8e2394bf93 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -414,6 +414,16 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
 
 	switch (xcvr->mode) {
 	case FSL_XCVR_MODE_SPDIF:
+		if (xcvr->soc_data->spdif_only && tx) {
+			ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_TX_DPTH_CTRL_SET,
+						 FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM,
+						 FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM);
+			if (ret < 0) {
+				dev_err(dai->dev, "Failed to set bypass fem: %d\n", ret);
+				return ret;
+			}
+		}
+		fallthrough;
 	case FSL_XCVR_MODE_ARC:
 		if (tx) {
 			ret = fsl_xcvr_en_aud_pll(xcvr, fout);
-- 
2.42.0

[PATCH AUTOSEL 6.6 13/47] ASoC: rt5650: add mutex to avoid the jack detection failure

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ]

This patch adds the jd_mutex to protect the jack detection control flow.
And only the headset type could check the button status.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 7938b52d741d8..a0d01d71d8b56 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -448,6 +448,7 @@ struct rt5645_priv {
 	struct regulator_bulk_data supplies[ARRAY_SIZE(rt5645_supply_names)];
 	struct rt5645_eq_param_s *eq_param;
 	struct timer_list btn_check_timer;
+	struct mutex jd_mutex;
 
 	int codec_type;
 	int sysclk;
@@ -3193,6 +3194,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 				rt5645_enable_push_button_irq(component, true);
 			}
 		} else {
+			if (rt5645->en_button_func)
+				rt5645_enable_push_button_irq(component, false);
 			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
 			snd_soc_dapm_sync(dapm);
 			rt5645->jack_type = SND_JACK_HEADPHONE;
@@ -3295,6 +3298,8 @@ static void rt5645_jack_detect_work(struct work_struct *work)
 	if (!rt5645->component)
 		return;
 
+	mutex_lock(&rt5645->jd_mutex);
+
 	switch (rt5645->pdata.jd_mode) {
 	case 0: /* Not using rt5645 JD */
 		if (rt5645->gpiod_hp_det) {
@@ -3321,7 +3326,7 @@ static void rt5645_jack_detect_work(struct work_struct *work)
 
 	if (!val && (rt5645->jack_type == 0)) { /* jack in */
 		report = rt5645_jack_detect(rt5645->component, 1);
-	} else if (!val && rt5645->jack_type != 0) {
+	} else if (!val && rt5645->jack_type == SND_JACK_HEADSET) {
 		/* for push button and jack out */
 		btn_type = 0;
 		if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) {
@@ -3377,6 +3382,8 @@ static void rt5645_jack_detect_work(struct work_struct *work)
 		rt5645_jack_detect(rt5645->component, 0);
 	}
 
+	mutex_unlock(&rt5645->jd_mutex);
+
 	snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE);
 	snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE);
 	if (rt5645->en_button_func)
@@ -4150,6 +4157,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c)
 	}
 	timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0);
 
+	mutex_init(&rt5645->jd_mutex);
 	INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
 	INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work);
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 14/47] ASoC: SOF: mediatek: mt8186: Add Google Steelix topology compatible

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit 505c83212da5bfca95109421b8f5d9f8c6cdfef2 ]

Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/mediatek/mt8186/mt8186.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/sof/mediatek/mt8186/mt8186.c b/sound/soc/sof/mediatek/mt8186/mt8186.c
index f587edf9e0a70..35f5c2cfb6e45 100644
--- a/sound/soc/sof/mediatek/mt8186/mt8186.c
+++ b/sound/soc/sof/mediatek/mt8186/mt8186.c
@@ -599,6 +599,9 @@ static struct snd_sof_dsp_ops sof_mt8186_ops = {
 
 static struct snd_sof_of_mach sof_mt8186_machs[] = {
 	{
+		.compatible = "google,steelix",
+		.sof_tplg_filename = "sof-mt8186-google-steelix.tplg"
+	}, {
 		.compatible = "mediatek,mt8186",
 		.sof_tplg_filename = "sof-mt8186.tplg",
 	},
-- 
2.42.0

[PATCH AUTOSEL 6.6 15/47] ASoC: fsl_xcvr: refine the requested phy clock frequency

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 ]

As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.

The relation of phy clock is:
    sai_pll_ref_sel
       sai_pll
          sai_pll_bypass
             sai_pll_out
                sai_pll_out_div2
                   earc_phy_cg

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_xcvr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index 77f8e2394bf93..f0fb33d719c25 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
 	struct device *dev = &xcvr->pdev->dev;
 	int ret;
 
-	freq = xcvr->soc_data->spdif_only ? freq / 10 : freq;
+	freq = xcvr->soc_data->spdif_only ? freq / 5 : freq;
 	clk_disable_unprepare(xcvr->phy_clk);
 	ret = clk_set_rate(xcvr->phy_clk, freq);
 	if (ret < 0) {
@@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	u32 m_ctl = 0, v_ctl = 0;
 	u32 r = substream->runtime->rate, ch = substream->runtime->channels;
-	u32 fout = 32 * r * ch * 10 * 2;
+	u32 fout = 32 * r * ch * 10;
 	int ret = 0;
 
 	switch (xcvr->mode) {
-- 
2.42.0

[PATCH AUTOSEL 6.6 16/47] ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

[ Upstream commit 3d1dc8b1030df8ca0fdfd4905c88ee10db943bf8 ]

When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.

Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/skl_hda_dsp_generic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c
index a06e05154ae1f..70c806cc5b2ee 100644
--- a/sound/soc/intel/boards/skl_hda_dsp_generic.c
+++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c
@@ -154,6 +154,8 @@ static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params)
 		card->dapm_widgets = skl_hda_widgets;
 		card->num_dapm_widgets = ARRAY_SIZE(skl_hda_widgets);
 		if (!ctx->idisp_codec) {
+			card->dapm_routes = &skl_hda_map[IDISP_ROUTE_COUNT];
+			num_route -= IDISP_ROUTE_COUNT;
 			for (i = 0; i < IDISP_DAI_COUNT; i++) {
 				skl_hda_be_dai_links[i].codecs = &asoc_dummy_dlc;
 				skl_hda_be_dai_links[i].num_codecs = 1;
-- 
2.42.0

[PATCH AUTOSEL 6.6 17/47] ASoC: SOF: ipc4-topology: Add core_mask in struct snd_sof_pipeline

[Sasha Levin]

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit 0376b995bb7a65fb0c056f3adc5e9695ad0c1805 ]

With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/ipc3-topology.c | 2 ++
 sound/soc/sof/ipc4-topology.c | 9 +++++++++
 sound/soc/sof/sof-audio.h     | 2 ++
 3 files changed, 13 insertions(+)

diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c
index ba4ef290b6343..2c7a5e7a364cf 100644
--- a/sound/soc/sof/ipc3-topology.c
+++ b/sound/soc/sof/ipc3-topology.c
@@ -493,6 +493,7 @@ static int sof_ipc3_widget_setup_comp_mixer(struct snd_sof_widget *swidget)
 static int sof_ipc3_widget_setup_comp_pipeline(struct snd_sof_widget *swidget)
 {
 	struct snd_soc_component *scomp = swidget->scomp;
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	struct sof_ipc_pipe_new *pipeline;
 	struct snd_sof_widget *comp_swidget;
 	int ret;
@@ -545,6 +546,7 @@ static int sof_ipc3_widget_setup_comp_pipeline(struct snd_sof_widget *swidget)
 		swidget->dynamic_pipeline_widget);
 
 	swidget->core = pipeline->core;
+	spipe->core_mask |= BIT(pipeline->core);
 
 	return 0;
 
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index c9c1d2ec7af25..05c3b1153a91c 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -654,6 +654,7 @@ static int sof_ipc4_widget_setup_comp_pipeline(struct snd_sof_widget *swidget)
 {
 	struct snd_soc_component *scomp = swidget->scomp;
 	struct sof_ipc4_pipeline *pipeline;
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	int ret;
 
 	pipeline = kzalloc(sizeof(*pipeline), GFP_KERNEL);
@@ -668,6 +669,7 @@ static int sof_ipc4_widget_setup_comp_pipeline(struct snd_sof_widget *swidget)
 	}
 
 	swidget->core = pipeline->core_id;
+	spipe->core_mask |= BIT(pipeline->core_id);
 
 	if (pipeline->use_chain_dma) {
 		dev_dbg(scomp->dev, "Set up chain DMA for %s\n", swidget->widget->name);
@@ -798,6 +800,7 @@ static int sof_ipc4_widget_setup_comp_mixer(struct snd_sof_widget *swidget)
 static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget)
 {
 	struct snd_soc_component *scomp = swidget->scomp;
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	struct sof_ipc4_src *src;
 	int ret;
 
@@ -820,6 +823,8 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget)
 		goto err;
 	}
 
+	spipe->core_mask |= BIT(swidget->core);
+
 	dev_dbg(scomp->dev, "SRC sink rate %d\n", src->sink_rate);
 
 	ret = sof_ipc4_widget_setup_msg(swidget, &src->msg);
@@ -865,6 +870,7 @@ static int sof_ipc4_widget_setup_comp_process(struct snd_sof_widget *swidget)
 {
 	struct snd_soc_component *scomp = swidget->scomp;
 	struct sof_ipc4_fw_module *fw_module;
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	struct sof_ipc4_process *process;
 	void *cfg;
 	int ret;
@@ -921,6 +927,9 @@ static int sof_ipc4_widget_setup_comp_process(struct snd_sof_widget *swidget)
 
 	sof_ipc4_widget_update_kcontrol_module_id(swidget);
 
+	/* set pipeline core mask to keep track of the core the module is scheduled to run on */
+	spipe->core_mask |= BIT(swidget->core);
+
 	return 0;
 free_base_cfg_ext:
 	kfree(process->base_config_ext);
diff --git a/sound/soc/sof/sof-audio.h b/sound/soc/sof/sof-audio.h
index 5d5eeb1a1a6f0..a6d6bcd00ceec 100644
--- a/sound/soc/sof/sof-audio.h
+++ b/sound/soc/sof/sof-audio.h
@@ -480,6 +480,7 @@ struct snd_sof_widget {
  * @paused_count: Count of number of PCM's that have started and have currently paused this
 		  pipeline
  * @complete: flag used to indicate that pipeline set up is complete.
+ * @core_mask: Mask containing target cores for all modules in the pipeline
  * @list: List item in sdev pipeline_list
  */
 struct snd_sof_pipeline {
@@ -487,6 +488,7 @@ struct snd_sof_pipeline {
 	int started_count;
 	int paused_count;
 	int complete;
+	unsigned long core_mask;
 	struct list_head list;
 };
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 18/47] ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores

[Sasha Levin]

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit 31ed8da1c8e5e504710bb36863700e3389f8fc81 ]

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/sof-audio.c | 65 ++++++++++++++++++++++++---------------
 1 file changed, 41 insertions(+), 24 deletions(-)

diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c
index 563fe6f7789f7..77cc64ac71131 100644
--- a/sound/soc/sof/sof-audio.c
+++ b/sound/soc/sof/sof-audio.c
@@ -46,6 +46,7 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev,
 				    struct snd_sof_widget *swidget)
 {
 	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	struct snd_sof_widget *pipe_widget;
 	int err = 0;
 	int ret;
@@ -87,15 +88,22 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev,
 	}
 
 	/*
-	 * disable widget core. continue to route setup status and complete flag
-	 * even if this fails and return the appropriate error
+	 * decrement ref count for cores associated with all modules in the pipeline and clear
+	 * the complete flag
 	 */
-	ret = snd_sof_dsp_core_put(sdev, swidget->core);
-	if (ret < 0) {
-		dev_err(sdev->dev, "error: failed to disable target core: %d for widget %s\n",
-			swidget->core, swidget->widget->name);
-		if (!err)
-			err = ret;
+	if (swidget->id == snd_soc_dapm_scheduler) {
+		int i;
+
+		for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) {
+			ret = snd_sof_dsp_core_put(sdev, i);
+			if (ret < 0) {
+				dev_err(sdev->dev, "failed to disable target core: %d for pipeline %s\n",
+					i, swidget->widget->name);
+				if (!err)
+					err = ret;
+			}
+		}
+		swidget->spipe->complete = 0;
 	}
 
 	/*
@@ -108,10 +116,6 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev,
 			err = ret;
 	}
 
-	/* clear pipeline complete */
-	if (swidget->id == snd_soc_dapm_scheduler)
-		swidget->spipe->complete = 0;
-
 	if (!err)
 		dev_dbg(sdev->dev, "widget %s freed\n", swidget->widget->name);
 
@@ -134,8 +138,10 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev,
 				     struct snd_sof_widget *swidget)
 {
 	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
+	struct snd_sof_pipeline *spipe = swidget->spipe;
 	bool use_count_decremented = false;
 	int ret;
+	int i;
 
 	/* skip if there is no private data */
 	if (!swidget->private)
@@ -166,19 +172,23 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev,
 			goto use_count_dec;
 	}
 
-	/* enable widget core */
-	ret = snd_sof_dsp_core_get(sdev, swidget->core);
-	if (ret < 0) {
-		dev_err(sdev->dev, "error: failed to enable target core for widget %s\n",
-			swidget->widget->name);
-		goto pipe_widget_free;
+	/* update ref count for cores associated with all modules in the pipeline */
+	if (swidget->id == snd_soc_dapm_scheduler) {
+		for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) {
+			ret = snd_sof_dsp_core_get(sdev, i);
+			if (ret < 0) {
+				dev_err(sdev->dev, "failed to enable target core %d for pipeline %s\n",
+					i, swidget->widget->name);
+				goto pipe_widget_free;
+			}
+		}
 	}
 
 	/* setup widget in the DSP */
 	if (tplg_ops && tplg_ops->widget_setup) {
 		ret = tplg_ops->widget_setup(sdev, swidget);
 		if (ret < 0)
-			goto core_put;
+			goto pipe_widget_free;
 	}
 
 	/* send config for DAI components */
@@ -208,15 +218,22 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev,
 	return 0;
 
 widget_free:
-	/* widget use_count and core ref_count will both be decremented by sof_widget_free() */
+	/* widget use_count will be decremented by sof_widget_free() */
 	sof_widget_free_unlocked(sdev, swidget);
 	use_count_decremented = true;
-core_put:
-	if (!use_count_decremented)
-		snd_sof_dsp_core_put(sdev, swidget->core);
 pipe_widget_free:
-	if (swidget->id != snd_soc_dapm_scheduler)
+	if (swidget->id != snd_soc_dapm_scheduler) {
 		sof_widget_free_unlocked(sdev, swidget->spipe->pipe_widget);
+	} else {
+		int j;
+
+		/* decrement ref count for all cores that were updated previously */
+		for_each_set_bit(j, &spipe->core_mask, sdev->num_cores) {
+			if (j >= i)
+				break;
+			snd_sof_dsp_core_put(sdev, j);
+		}
+	}
 use_count_dec:
 	if (!use_count_decremented)
 		swidget->use_count--;
-- 
2.42.0

[PATCH AUTOSEL 6.6 19/47] nouveau/tu102: flush all pdbs on vmm flush

[Sasha Levin]

From: Dave Airlie <airlied@redhat.com>

[ Upstream commit cb9c919364653eeafb49e7ff5cd32f1ad64063ac ]

This is a hack around a bug exposed with the GSP code, I'm not sure
what is happening exactly, but it appears some of our flushes don't
result in proper tlb invalidation for out BAR2 and we get a BAR2
fault from GSP and it all dies.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
index 6cb5eefa45e9a..5a08458fe1b7f 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
@@ -31,7 +31,7 @@ tu102_vmm_flush(struct nvkm_vmm *vmm, int depth)
 
 	type |= 0x00000001; /* PAGE_ALL */
 	if (atomic_read(&vmm->engref[NVKM_SUBDEV_BAR]))
-		type |= 0x00000004; /* HUB_ONLY */
+		type |= 0x00000006; /* HUB_ONLY | ALL PDB (hack) */
 
 	mutex_lock(&vmm->mmu->mutex);
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 20/47] ASoC: amd: yc: Add DMI entry to support System76 Pangolin 13

[Sasha Levin]

From: Jeremy Soller <jeremy@system76.com>

[ Upstream commit 19650c0f402f53abe48a55a1c49c8ed9576a088c ]

Add pang13 quirk to enable the internal microphone.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index e2a510443bf1c..c425652b0fadc 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -388,6 +388,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "pang12"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "System76"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "pang13"),
+		}
+	},
 	{}
 };
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 21/47] ASoC: hdac_hda: Conditionally register dais for HDMI and Analog

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

[ Upstream commit a0575b4add21a243cc3257e75ad913cd5377d5f2 ]

The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten

To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not  register the HDMI dais.

Depends-on: 3d1dc8b1030d ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available")
Link: https://github.com/thesofproject/linux/issues/4509
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hda.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c
index be66853afbe2b..d59d38ce5657b 100644
--- a/sound/soc/codecs/hdac_hda.c
+++ b/sound/soc/codecs/hdac_hda.c
@@ -124,6 +124,9 @@ static struct snd_soc_dai_driver hdac_hda_dais[] = {
 		.sig_bits = 24,
 	},
 },
+};
+
+static struct snd_soc_dai_driver hdac_hda_hdmi_dais[] = {
 {
 	.id = HDAC_HDMI_0_DAI_ID,
 	.name = "intel-hdmi-hifi1",
@@ -578,8 +581,16 @@ static const struct snd_soc_component_driver hdac_hda_codec = {
 	.endianness		= 1,
 };
 
+static const struct snd_soc_component_driver hdac_hda_hdmi_codec = {
+	.probe			= hdac_hda_codec_probe,
+	.remove			= hdac_hda_codec_remove,
+	.idle_bias_on		= false,
+	.endianness		= 1,
+};
+
 static int hdac_hda_dev_probe(struct hdac_device *hdev)
 {
+	struct hdac_hda_priv *hda_pvt = dev_get_drvdata(&hdev->dev);
 	struct hdac_ext_link *hlink;
 	int ret;
 
@@ -592,9 +603,15 @@ static int hdac_hda_dev_probe(struct hdac_device *hdev)
 	snd_hdac_ext_bus_link_get(hdev->bus, hlink);
 
 	/* ASoC specific initialization */
-	ret = devm_snd_soc_register_component(&hdev->dev,
-					 &hdac_hda_codec, hdac_hda_dais,
-					 ARRAY_SIZE(hdac_hda_dais));
+	if (hda_pvt->need_display_power)
+		ret = devm_snd_soc_register_component(&hdev->dev,
+						&hdac_hda_hdmi_codec, hdac_hda_hdmi_dais,
+						ARRAY_SIZE(hdac_hda_hdmi_dais));
+	else
+		ret = devm_snd_soc_register_component(&hdev->dev,
+						&hdac_hda_codec, hdac_hda_dais,
+						ARRAY_SIZE(hdac_hda_dais));
+
 	if (ret < 0) {
 		dev_err(&hdev->dev, "failed to register HDA codec %d\n", ret);
 		return ret;
-- 
2.42.0

[PATCH AUTOSEL 6.6 22/47] ASoC: SOF: ipc4-topology: Correct data structures for the SRC module

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

[ Upstream commit c447636970e3409ac39f0bb8c2dcff6b726f36b0 ]

Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/ipc4-topology.c | 21 +++++++++++----------
 sound/soc/sof/ipc4-topology.h | 16 ++++++++++++----
 2 files changed, 23 insertions(+), 14 deletions(-)

diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 05c3b1153a91c..42f6a99935d16 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -139,7 +139,7 @@ static const struct sof_topology_token gain_tokens[] = {
 /* SRC */
 static const struct sof_topology_token src_tokens[] = {
 	{SOF_TKN_SRC_RATE_OUT, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
-		offsetof(struct sof_ipc4_src, sink_rate)},
+		offsetof(struct sof_ipc4_src_data, sink_rate)},
 };
 
 static const struct sof_token_info ipc4_token_list[SOF_TOKEN_COUNT] = {
@@ -812,11 +812,12 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget)
 
 	swidget->private = src;
 
-	ret = sof_ipc4_get_audio_fmt(scomp, swidget, &src->available_fmt, &src->base_config);
+	ret = sof_ipc4_get_audio_fmt(scomp, swidget, &src->available_fmt,
+				     &src->data.base_config);
 	if (ret)
 		goto err;
 
-	ret = sof_update_ipc_object(scomp, src, SOF_SRC_TOKENS, swidget->tuples,
+	ret = sof_update_ipc_object(scomp, &src->data, SOF_SRC_TOKENS, swidget->tuples,
 				    swidget->num_tuples, sizeof(*src), 1);
 	if (ret) {
 		dev_err(scomp->dev, "Parsing SRC tokens failed\n");
@@ -825,7 +826,7 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget)
 
 	spipe->core_mask |= BIT(swidget->core);
 
-	dev_dbg(scomp->dev, "SRC sink rate %d\n", src->sink_rate);
+	dev_dbg(scomp->dev, "SRC sink rate %d\n", src->data.sink_rate);
 
 	ret = sof_ipc4_widget_setup_msg(swidget, &src->msg);
 	if (ret)
@@ -1896,7 +1897,7 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget,
 	u32 out_ref_rate, out_ref_channels, out_ref_valid_bits;
 	int output_format_index, input_format_index;
 
-	input_format_index = sof_ipc4_init_input_audio_fmt(sdev, swidget, &src->base_config,
+	input_format_index = sof_ipc4_init_input_audio_fmt(sdev, swidget, &src->data.base_config,
 							   pipeline_params, available_fmt);
 	if (input_format_index < 0)
 		return input_format_index;
@@ -1926,7 +1927,7 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget,
 	 */
 	out_ref_rate = params_rate(fe_params);
 
-	output_format_index = sof_ipc4_init_output_audio_fmt(sdev, &src->base_config,
+	output_format_index = sof_ipc4_init_output_audio_fmt(sdev, &src->data.base_config,
 							     available_fmt, out_ref_rate,
 							     out_ref_channels, out_ref_valid_bits);
 	if (output_format_index < 0) {
@@ -1936,10 +1937,10 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget,
 	}
 
 	/* update pipeline memory usage */
-	sof_ipc4_update_resource_usage(sdev, swidget, &src->base_config);
+	sof_ipc4_update_resource_usage(sdev, swidget, &src->data.base_config);
 
 	out_audio_fmt = &available_fmt->output_pin_fmts[output_format_index].audio_fmt;
-	src->sink_rate = out_audio_fmt->sampling_frequency;
+	src->data.sink_rate = out_audio_fmt->sampling_frequency;
 
 	/* update pipeline_params for sink widgets */
 	return sof_ipc4_update_hw_params(sdev, pipeline_params, out_audio_fmt);
@@ -2297,8 +2298,8 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 	{
 		struct sof_ipc4_src *src = swidget->private;
 
-		ipc_size = sizeof(struct sof_ipc4_base_module_cfg) + sizeof(src->sink_rate);
-		ipc_data = src;
+		ipc_size = sizeof(src->data);
+		ipc_data = &src->data;
 
 		msg = &src->msg;
 		break;
diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h
index d75f17f4749c6..f96536dbaee55 100644
--- a/sound/soc/sof/ipc4-topology.h
+++ b/sound/soc/sof/ipc4-topology.h
@@ -387,16 +387,24 @@ struct sof_ipc4_mixer {
 	struct sof_ipc4_msg msg;
 };
 
-/**
- * struct sof_ipc4_src SRC config data
+/*
+ * struct sof_ipc4_src_data - IPC data for SRC
  * @base_config: IPC base config data
  * @sink_rate: Output rate for sink module
+ */
+struct sof_ipc4_src_data {
+	struct sof_ipc4_base_module_cfg base_config;
+	uint32_t sink_rate;
+} __packed __aligned(4);
+
+/**
+ * struct sof_ipc4_src - SRC config data
+ * @data: IPC base config data
  * @available_fmt: Available audio format
  * @msg: IPC4 message struct containing header and data info
  */
 struct sof_ipc4_src {
-	struct sof_ipc4_base_module_cfg base_config;
-	uint32_t sink_rate;
+	struct sof_ipc4_src_data data;
 	struct sof_ipc4_available_audio_format available_fmt;
 	struct sof_ipc4_msg msg;
 };
-- 
2.42.0

[PATCH AUTOSEL 6.6 23/47] ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

[ Upstream commit e238b68e6dc89ddab52bd98216fe5623e94792b1 ]

Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/ipc4-control.c  | 20 ++++++++++----------
 sound/soc/sof/ipc4-topology.c | 31 +++++++++++++++----------------
 sound/soc/sof/ipc4-topology.h | 18 +++++++++++++-----
 3 files changed, 38 insertions(+), 31 deletions(-)

diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c
index c6d404d440970..e4ce1b53fba65 100644
--- a/sound/soc/sof/ipc4-control.c
+++ b/sound/soc/sof/ipc4-control.c
@@ -89,7 +89,7 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge
 	struct sof_ipc4_control_data *cdata = scontrol->ipc_control_data;
 	struct sof_ipc4_gain *gain = swidget->private;
 	struct sof_ipc4_msg *msg = &cdata->msg;
-	struct sof_ipc4_gain_data data;
+	struct sof_ipc4_gain_params params;
 	bool all_channels_equal = true;
 	u32 value;
 	int ret, i;
@@ -109,20 +109,20 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge
 	 */
 	for (i = 0; i < scontrol->num_channels; i++) {
 		if (all_channels_equal) {
-			data.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK;
-			data.init_val = cdata->chanv[0].value;
+			params.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK;
+			params.init_val = cdata->chanv[0].value;
 		} else {
-			data.channels = cdata->chanv[i].channel;
-			data.init_val = cdata->chanv[i].value;
+			params.channels = cdata->chanv[i].channel;
+			params.init_val = cdata->chanv[i].value;
 		}
 
 		/* set curve type and duration from topology */
-		data.curve_duration_l = gain->data.curve_duration_l;
-		data.curve_duration_h = gain->data.curve_duration_h;
-		data.curve_type = gain->data.curve_type;
+		params.curve_duration_l = gain->data.params.curve_duration_l;
+		params.curve_duration_h = gain->data.params.curve_duration_h;
+		params.curve_type = gain->data.params.curve_type;
 
-		msg->data_ptr = &data;
-		msg->data_size = sizeof(data);
+		msg->data_ptr = &params;
+		msg->data_size = sizeof(params);
 
 		ret = sof_ipc4_set_get_kcontrol_data(scontrol, true, lock);
 		msg->data_ptr = NULL;
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 42f6a99935d16..2c075afd237ce 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -128,12 +128,12 @@ static const struct sof_topology_token comp_ext_tokens[] = {
 
 static const struct sof_topology_token gain_tokens[] = {
 	{SOF_TKN_GAIN_RAMP_TYPE, SND_SOC_TPLG_TUPLE_TYPE_WORD,
-		get_token_u32, offsetof(struct sof_ipc4_gain_data, curve_type)},
+		get_token_u32, offsetof(struct sof_ipc4_gain_params, curve_type)},
 	{SOF_TKN_GAIN_RAMP_DURATION,
 		SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32,
-		offsetof(struct sof_ipc4_gain_data, curve_duration_l)},
+		offsetof(struct sof_ipc4_gain_params, curve_duration_l)},
 	{SOF_TKN_GAIN_VAL, SND_SOC_TPLG_TUPLE_TYPE_WORD,
-		get_token_u32, offsetof(struct sof_ipc4_gain_data, init_val)},
+		get_token_u32, offsetof(struct sof_ipc4_gain_params, init_val)},
 };
 
 /* SRC */
@@ -721,15 +721,15 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget)
 
 	swidget->private = gain;
 
-	gain->data.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK;
-	gain->data.init_val = SOF_IPC4_VOL_ZERO_DB;
+	gain->data.params.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK;
+	gain->data.params.init_val = SOF_IPC4_VOL_ZERO_DB;
 
-	ret = sof_ipc4_get_audio_fmt(scomp, swidget, &gain->available_fmt, &gain->base_config);
+	ret = sof_ipc4_get_audio_fmt(scomp, swidget, &gain->available_fmt, &gain->data.base_config);
 	if (ret)
 		goto err;
 
-	ret = sof_update_ipc_object(scomp, &gain->data, SOF_GAIN_TOKENS, swidget->tuples,
-				    swidget->num_tuples, sizeof(gain->data), 1);
+	ret = sof_update_ipc_object(scomp, &gain->data.params, SOF_GAIN_TOKENS,
+				    swidget->tuples, swidget->num_tuples, sizeof(gain->data), 1);
 	if (ret) {
 		dev_err(scomp->dev, "Parsing gain tokens failed\n");
 		goto err;
@@ -737,8 +737,8 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget)
 
 	dev_dbg(scomp->dev,
 		"pga widget %s: ramp type: %d, ramp duration %d, initial gain value: %#x\n",
-		swidget->widget->name, gain->data.curve_type, gain->data.curve_duration_l,
-		gain->data.init_val);
+		swidget->widget->name, gain->data.params.curve_type,
+		gain->data.params.curve_duration_l, gain->data.params.init_val);
 
 	ret = sof_ipc4_widget_setup_msg(swidget, &gain->msg);
 	if (ret)
@@ -1822,7 +1822,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget,
 	u32 out_ref_rate, out_ref_channels, out_ref_valid_bits;
 	int ret;
 
-	ret = sof_ipc4_init_input_audio_fmt(sdev, swidget, &gain->base_config,
+	ret = sof_ipc4_init_input_audio_fmt(sdev, swidget, &gain->data.base_config,
 					    pipeline_params, available_fmt);
 	if (ret < 0)
 		return ret;
@@ -1832,7 +1832,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget,
 	out_ref_channels = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(in_fmt->fmt_cfg);
 	out_ref_valid_bits = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(in_fmt->fmt_cfg);
 
-	ret = sof_ipc4_init_output_audio_fmt(sdev, &gain->base_config, available_fmt,
+	ret = sof_ipc4_init_output_audio_fmt(sdev, &gain->data.base_config, available_fmt,
 					     out_ref_rate, out_ref_channels, out_ref_valid_bits);
 	if (ret < 0) {
 		dev_err(sdev->dev, "Failed to initialize output format for %s",
@@ -1841,7 +1841,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget,
 	}
 
 	/* update pipeline memory usage */
-	sof_ipc4_update_resource_usage(sdev, swidget, &gain->base_config);
+	sof_ipc4_update_resource_usage(sdev, swidget, &gain->data.base_config);
 
 	return 0;
 }
@@ -2277,9 +2277,8 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget
 	{
 		struct sof_ipc4_gain *gain = swidget->private;
 
-		ipc_size = sizeof(struct sof_ipc4_base_module_cfg) +
-			   sizeof(struct sof_ipc4_gain_data);
-		ipc_data = gain;
+		ipc_size = sizeof(gain->data);
+		ipc_data = &gain->data;
 
 		msg = &gain->msg;
 		break;
diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h
index f96536dbaee55..21436657ad85b 100644
--- a/sound/soc/sof/ipc4-topology.h
+++ b/sound/soc/sof/ipc4-topology.h
@@ -344,7 +344,7 @@ struct sof_ipc4_control_data {
 };
 
 /**
- * struct sof_ipc4_gain_data - IPC gain blob
+ * struct sof_ipc4_gain_params - IPC gain parameters
  * @channels: Channels
  * @init_val: Initial value
  * @curve_type: Curve type
@@ -352,24 +352,32 @@ struct sof_ipc4_control_data {
  * @curve_duration_l: Curve duration low part
  * @curve_duration_h: Curve duration high part
  */
-struct sof_ipc4_gain_data {
+struct sof_ipc4_gain_params {
 	uint32_t channels;
 	uint32_t init_val;
 	uint32_t curve_type;
 	uint32_t reserved;
 	uint32_t curve_duration_l;
 	uint32_t curve_duration_h;
-} __aligned(8);
+} __packed __aligned(4);
 
 /**
- * struct sof_ipc4_gain - gain config data
+ * struct sof_ipc4_gain_data - IPC gain init blob
  * @base_config: IPC base config data
+ * @params: Initial parameters for the gain module
+ */
+struct sof_ipc4_gain_data {
+	struct sof_ipc4_base_module_cfg base_config;
+	struct sof_ipc4_gain_params params;
+} __packed __aligned(4);
+
+/**
+ * struct sof_ipc4_gain - gain config data
  * @data: IPC gain blob
  * @available_fmt: Available audio format
  * @msg: message structure for gain
  */
 struct sof_ipc4_gain {
-	struct sof_ipc4_base_module_cfg base_config;
 	struct sof_ipc4_gain_data data;
 	struct sof_ipc4_available_audio_format available_fmt;
 	struct sof_ipc4_msg msg;
-- 
2.42.0

[PATCH AUTOSEL 6.6 24/47] pds_vdpa: fix up format-truncation complaint

[Sasha Levin]

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit 4f317d6529d7fc3ab7769ef89645d43fc7eec61b ]

Our friendly kernel test robot has recently been pointing out
some format-truncation issues.  Here's a fix for one of them.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040109.RfgJoE7L-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/pds/debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vdpa/pds/debugfs.c b/drivers/vdpa/pds/debugfs.c
index 9b04aad6ec35d..c328e694f6e7f 100644
--- a/drivers/vdpa/pds/debugfs.c
+++ b/drivers/vdpa/pds/debugfs.c
@@ -261,7 +261,7 @@ void pds_vdpa_debugfs_add_vdpadev(struct pds_vdpa_aux *vdpa_aux)
 	debugfs_create_file("config", 0400, vdpa_aux->dentry, vdpa_aux->pdsv, &config_fops);
 
 	for (i = 0; i < vdpa_aux->pdsv->num_vqs; i++) {
-		char name[8];
+		char name[16];
 
 		snprintf(name, sizeof(name), "vq%02d", i);
 		debugfs_create_file(name, 0400, vdpa_aux->dentry,
-- 
2.42.0

[PATCH AUTOSEL 6.6 25/47] pds_vdpa: clear config callback when status goes to 0

[Sasha Levin]

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit dd3b8de16e90c5594eddd29aeeb99e97c6f863be ]

If the client driver is setting status to 0, something is
getting shutdown and possibly removed.  Make sure we clear
the config_cb so that it doesn't end up crashing when
trying to call a bogus callback.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/pds/vdpa_dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/pds/vdpa_dev.c b/drivers/vdpa/pds/vdpa_dev.c
index 52b2449182ad7..9fc89c82d1f01 100644
--- a/drivers/vdpa/pds/vdpa_dev.c
+++ b/drivers/vdpa/pds/vdpa_dev.c
@@ -461,8 +461,10 @@ static void pds_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status)
 
 	pds_vdpa_cmd_set_status(pdsv, status);
 
-	/* Note: still working with FW on the need for this reset cmd */
 	if (status == 0) {
+		struct vdpa_callback null_cb = { };
+
+		pds_vdpa_set_config_cb(vdpa_dev, &null_cb);
 		pds_vdpa_cmd_reset(pdsv);
 
 		for (i = 0; i < pdsv->num_vqs; i++) {
-- 
2.42.0

[PATCH AUTOSEL 6.6 26/47] pds_vdpa: set features order

[Sasha Levin]

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit cefc9ba6aed48a3aa085888e3262ac2aa975714b ]

Fix up the order that the device and negotiated features
are checked to get a more reliable difference when things
get changed.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/pds/vdpa_dev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/vdpa/pds/vdpa_dev.c b/drivers/vdpa/pds/vdpa_dev.c
index 9fc89c82d1f01..25c0fe5ec3d5d 100644
--- a/drivers/vdpa/pds/vdpa_dev.c
+++ b/drivers/vdpa/pds/vdpa_dev.c
@@ -318,9 +318,8 @@ static int pds_vdpa_set_driver_features(struct vdpa_device *vdpa_dev, u64 featur
 		return -EOPNOTSUPP;
 	}
 
-	pdsv->negotiated_features = nego_features;
-
 	driver_features = pds_vdpa_get_driver_features(vdpa_dev);
+	pdsv->negotiated_features = nego_features;
 	dev_dbg(dev, "%s: %#llx => %#llx\n",
 		__func__, driver_features, nego_features);
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 27/47] net/tg3: fix race condition in tg3_reset_task()

[Sasha Levin]

From: Thinh Tran <thinhtr@linux.vnet.ibm.com>

[ Upstream commit 16b55b1f2269962fb6b5154b8bf43f37c9a96637 ]

When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:

   enum {
      /* I/O channel is in normal state */
      pci_channel_io_normal = (__force pci_channel_state_t) 1,

      /* I/O to channel is blocked */
      pci_channel_io_frozen = (__force pci_channel_state_t) 2,

      /* PCI card is dead */
      pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
   };

If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.

EEH driver gets error event
--> eeh_set_channel_state()
    and set device to one of
    error state above           scheduler: tg3_reset_task() get
                                returned error from tg3_init_hw()
                             --> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device

To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state.  (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.

Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.

Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/tg3.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 22b00912f7ac8..95d476ec14f5e 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6439,6 +6439,14 @@ static void tg3_dump_state(struct tg3 *tp)
 	int i;
 	u32 *regs;
 
+	/* If it is a PCI error, all registers will be 0xffff,
+	 * we don't dump them out, just report the error and return
+	 */
+	if (tp->pdev->error_state != pci_channel_io_normal) {
+		netdev_err(tp->dev, "PCI channel ERROR!\n");
+		return;
+	}
+
 	regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC);
 	if (!regs)
 		return;
@@ -11170,7 +11178,8 @@ static void tg3_reset_task(struct work_struct *work)
 	rtnl_lock();
 	tg3_full_lock(tp, 0);
 
-	if (tp->pcierr_recovery || !netif_running(tp->dev)) {
+	if (tp->pcierr_recovery || !netif_running(tp->dev) ||
+	    tp->pdev->error_state != pci_channel_io_normal) {
 		tg3_flag_clear(tp, RESET_TASK_PENDING);
 		tg3_full_unlock(tp);
 		rtnl_unlock();
-- 
2.42.0

[PATCH AUTOSEL 6.6 28/47] ASoC: da7219: Support low DC impedance headset

[Sasha Levin]

From: David Rau <David.Rau.opensource@dm.renesas.com>

[ Upstream commit 5f44de697383fcc9a9a1a78f99e09d1838704b90 ]

Change the default MIC detection impedance threshold to 200ohm
to support low mic DC impedance headset.

Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/da7219-aad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index 3bbe850916493..8537c96307a97 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -696,7 +696,7 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev)
 		aad_pdata->mic_det_thr =
 			da7219_aad_fw_mic_det_thr(dev, fw_val32);
 	else
-		aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_500_OHMS;
+		aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_200_OHMS;
 
 	if (fwnode_property_read_u32(aad_np, "dlg,jack-ins-deb", &fw_val32) >= 0)
 		aad_pdata->jack_ins_deb =
-- 
2.42.0

[PATCH AUTOSEL 6.6 29/47] ASoC: ops: add correct range check for limiting volume

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit fb9ad24485087e0f00d84bee7a5914640b2b9024 ]

Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 55b009d3c6815..2d25748ca7066 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -661,7 +661,7 @@ int snd_soc_limit_volume(struct snd_soc_card *card,
 	kctl = snd_soc_card_get_kcontrol(card, name);
 	if (kctl) {
 		struct soc_mixer_control *mc = (struct soc_mixer_control *)kctl->private_value;
-		if (max <= mc->max) {
+		if (max <= mc->max - mc->min) {
 			mc->platform_max = max;
 			ret = 0;
 		}
-- 
2.42.0

[PATCH AUTOSEL 6.6 30/47] nvme: introduce helper function to get ctrl state

[Sasha Levin]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit 5c687c287c46fadb14644091823298875a5216aa ]

The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/nvme.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index f35647c470afa..68313148e6ed5 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -386,6 +386,11 @@ struct nvme_ctrl {
 	enum nvme_dctype dctype;
 };
 
+static inline enum nvme_ctrl_state nvme_ctrl_state(struct nvme_ctrl *ctrl)
+{
+	return READ_ONCE(ctrl->state);
+}
+
 enum nvme_iopolicy {
 	NVME_IOPOLICY_NUMA,
 	NVME_IOPOLICY_RR,
-- 
2.42.0

[PATCH AUTOSEL 6.6 31/47] nvme: ensure reset state check ordering

[Sasha Levin]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit e6e7f7ac03e40795346f1b2994a05f507ad8d345 ]

A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.

Reported-by: Minh Hoang <mh2022@meta.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 42 +++++++++++++++++++++-------------------
 drivers/nvme/host/fc.c   |  6 +++---
 drivers/nvme/host/pci.c  | 14 +++++++-------
 drivers/nvme/host/rdma.c | 23 +++++++++++++---------
 drivers/nvme/host/tcp.c  | 27 ++++++++++++++++----------
 5 files changed, 63 insertions(+), 49 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index c09048984a277..4e7bda7749caa 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -131,7 +131,7 @@ void nvme_queue_scan(struct nvme_ctrl *ctrl)
 	/*
 	 * Only new queue scan work when admin and IO queues are both alive
 	 */
-	if (ctrl->state == NVME_CTRL_LIVE && ctrl->tagset)
+	if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE && ctrl->tagset)
 		queue_work(nvme_wq, &ctrl->scan_work);
 }
 
@@ -143,7 +143,7 @@ void nvme_queue_scan(struct nvme_ctrl *ctrl)
  */
 int nvme_try_sched_reset(struct nvme_ctrl *ctrl)
 {
-	if (ctrl->state != NVME_CTRL_RESETTING)
+	if (nvme_ctrl_state(ctrl) != NVME_CTRL_RESETTING)
 		return -EBUSY;
 	if (!queue_work(nvme_reset_wq, &ctrl->reset_work))
 		return -EBUSY;
@@ -156,7 +156,7 @@ static void nvme_failfast_work(struct work_struct *work)
 	struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
 			struct nvme_ctrl, failfast_work);
 
-	if (ctrl->state != NVME_CTRL_CONNECTING)
+	if (nvme_ctrl_state(ctrl) != NVME_CTRL_CONNECTING)
 		return;
 
 	set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
@@ -200,7 +200,7 @@ int nvme_reset_ctrl_sync(struct nvme_ctrl *ctrl)
 	ret = nvme_reset_ctrl(ctrl);
 	if (!ret) {
 		flush_work(&ctrl->reset_work);
-		if (ctrl->state != NVME_CTRL_LIVE)
+		if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE)
 			ret = -ENETRESET;
 	}
 
@@ -499,7 +499,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 
 	spin_lock_irqsave(&ctrl->lock, flags);
 
-	old_state = ctrl->state;
+	old_state = nvme_ctrl_state(ctrl);
 	switch (new_state) {
 	case NVME_CTRL_LIVE:
 		switch (old_state) {
@@ -567,7 +567,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 	}
 
 	if (changed) {
-		ctrl->state = new_state;
+		WRITE_ONCE(ctrl->state, new_state);
 		wake_up_all(&ctrl->state_wq);
 	}
 
@@ -575,11 +575,11 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 	if (!changed)
 		return false;
 
-	if (ctrl->state == NVME_CTRL_LIVE) {
+	if (new_state == NVME_CTRL_LIVE) {
 		if (old_state == NVME_CTRL_CONNECTING)
 			nvme_stop_failfast_work(ctrl);
 		nvme_kick_requeue_lists(ctrl);
-	} else if (ctrl->state == NVME_CTRL_CONNECTING &&
+	} else if (new_state == NVME_CTRL_CONNECTING &&
 		old_state == NVME_CTRL_RESETTING) {
 		nvme_start_failfast_work(ctrl);
 	}
@@ -592,7 +592,7 @@ EXPORT_SYMBOL_GPL(nvme_change_ctrl_state);
  */
 static bool nvme_state_terminal(struct nvme_ctrl *ctrl)
 {
-	switch (ctrl->state) {
+	switch (nvme_ctrl_state(ctrl)) {
 	case NVME_CTRL_NEW:
 	case NVME_CTRL_LIVE:
 	case NVME_CTRL_RESETTING:
@@ -617,7 +617,7 @@ bool nvme_wait_reset(struct nvme_ctrl *ctrl)
 	wait_event(ctrl->state_wq,
 		   nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) ||
 		   nvme_state_terminal(ctrl));
-	return ctrl->state == NVME_CTRL_RESETTING;
+	return nvme_ctrl_state(ctrl) == NVME_CTRL_RESETTING;
 }
 EXPORT_SYMBOL_GPL(nvme_wait_reset);
 
@@ -704,9 +704,11 @@ EXPORT_SYMBOL_GPL(nvme_init_request);
 blk_status_t nvme_fail_nonready_command(struct nvme_ctrl *ctrl,
 		struct request *rq)
 {
-	if (ctrl->state != NVME_CTRL_DELETING_NOIO &&
-	    ctrl->state != NVME_CTRL_DELETING &&
-	    ctrl->state != NVME_CTRL_DEAD &&
+	enum nvme_ctrl_state state = nvme_ctrl_state(ctrl);
+
+	if (state != NVME_CTRL_DELETING_NOIO &&
+	    state != NVME_CTRL_DELETING &&
+	    state != NVME_CTRL_DEAD &&
 	    !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) &&
 	    !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
 		return BLK_STS_RESOURCE;
@@ -736,7 +738,7 @@ bool __nvme_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
 		 * command, which is require to set the queue live in the
 		 * appropinquate states.
 		 */
-		switch (ctrl->state) {
+		switch (nvme_ctrl_state(ctrl)) {
 		case NVME_CTRL_CONNECTING:
 			if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) &&
 			    (req->cmd->fabrics.fctype == nvme_fabrics_type_connect ||
@@ -2531,7 +2533,7 @@ static void nvme_set_latency_tolerance(struct device *dev, s32 val)
 
 	if (ctrl->ps_max_latency_us != latency) {
 		ctrl->ps_max_latency_us = latency;
-		if (ctrl->state == NVME_CTRL_LIVE)
+		if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE)
 			nvme_configure_apst(ctrl);
 	}
 }
@@ -3217,7 +3219,7 @@ static int nvme_dev_open(struct inode *inode, struct file *file)
 	struct nvme_ctrl *ctrl =
 		container_of(inode->i_cdev, struct nvme_ctrl, cdev);
 
-	switch (ctrl->state) {
+	switch (nvme_ctrl_state(ctrl)) {
 	case NVME_CTRL_LIVE:
 		break;
 	default:
@@ -3903,7 +3905,7 @@ static void nvme_scan_work(struct work_struct *work)
 	int ret;
 
 	/* No tagset on a live ctrl means IO queues could not created */
-	if (ctrl->state != NVME_CTRL_LIVE || !ctrl->tagset)
+	if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE || !ctrl->tagset)
 		return;
 
 	/*
@@ -3973,7 +3975,7 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl)
 	 * removing the namespaces' disks; fail all the queues now to avoid
 	 * potentially having to clean up the failed sync later.
 	 */
-	if (ctrl->state == NVME_CTRL_DEAD)
+	if (nvme_ctrl_state(ctrl) == NVME_CTRL_DEAD)
 		nvme_mark_namespaces_dead(ctrl);
 
 	/* this is a no-op when called from the controller reset handler */
@@ -4055,7 +4057,7 @@ static void nvme_async_event_work(struct work_struct *work)
 	 * flushing ctrl async_event_work after changing the controller state
 	 * from LIVE and before freeing the admin queue.
 	*/
-	if (ctrl->state == NVME_CTRL_LIVE)
+	if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE)
 		ctrl->ops->submit_async_event(ctrl);
 }
 
@@ -4439,7 +4441,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
 {
 	int ret;
 
-	ctrl->state = NVME_CTRL_NEW;
+	WRITE_ONCE(ctrl->state, NVME_CTRL_NEW);
 	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
 	spin_lock_init(&ctrl->lock);
 	mutex_init(&ctrl->scan_lock);
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index a15b37750d6e9..8ba8d1393535f 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -557,7 +557,7 @@ nvme_fc_rport_get(struct nvme_fc_rport *rport)
 static void
 nvme_fc_resume_controller(struct nvme_fc_ctrl *ctrl)
 {
-	switch (ctrl->ctrl.state) {
+	switch (nvme_ctrl_state(&ctrl->ctrl)) {
 	case NVME_CTRL_NEW:
 	case NVME_CTRL_CONNECTING:
 		/*
@@ -793,7 +793,7 @@ nvme_fc_ctrl_connectivity_loss(struct nvme_fc_ctrl *ctrl)
 		"NVME-FC{%d}: controller connectivity lost. Awaiting "
 		"Reconnect", ctrl->cnum);
 
-	switch (ctrl->ctrl.state) {
+	switch (nvme_ctrl_state(&ctrl->ctrl)) {
 	case NVME_CTRL_NEW:
 	case NVME_CTRL_LIVE:
 		/*
@@ -3316,7 +3316,7 @@ nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status)
 	unsigned long recon_delay = ctrl->ctrl.opts->reconnect_delay * HZ;
 	bool recon = true;
 
-	if (ctrl->ctrl.state != NVME_CTRL_CONNECTING)
+	if (nvme_ctrl_state(&ctrl->ctrl) != NVME_CTRL_CONNECTING)
 		return;
 
 	if (portptr->port_state == FC_OBJSTATE_ONLINE) {
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 3f0c9ee09a12b..0b4ee3164e660 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1234,7 +1234,7 @@ static bool nvme_should_reset(struct nvme_dev *dev, u32 csts)
 	bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO);
 
 	/* If there is a reset/reinit ongoing, we shouldn't reset again. */
-	switch (dev->ctrl.state) {
+	switch (nvme_ctrl_state(&dev->ctrl)) {
 	case NVME_CTRL_RESETTING:
 	case NVME_CTRL_CONNECTING:
 		return false;
@@ -1322,7 +1322,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req)
 	 * cancellation error. All outstanding requests are completed on
 	 * shutdown, so we return BLK_EH_DONE.
 	 */
-	switch (dev->ctrl.state) {
+	switch (nvme_ctrl_state(&dev->ctrl)) {
 	case NVME_CTRL_CONNECTING:
 		nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING);
 		fallthrough;
@@ -1594,7 +1594,7 @@ static int nvme_setup_io_queues_trylock(struct nvme_dev *dev)
 	/*
 	 * Controller is in wrong state, fail early.
 	 */
-	if (dev->ctrl.state != NVME_CTRL_CONNECTING) {
+	if (nvme_ctrl_state(&dev->ctrl) != NVME_CTRL_CONNECTING) {
 		mutex_unlock(&dev->shutdown_lock);
 		return -ENODEV;
 	}
@@ -2574,13 +2574,13 @@ static bool nvme_pci_ctrl_is_dead(struct nvme_dev *dev)
 
 static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown)
 {
+	enum nvme_ctrl_state state = nvme_ctrl_state(&dev->ctrl);
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 	bool dead;
 
 	mutex_lock(&dev->shutdown_lock);
 	dead = nvme_pci_ctrl_is_dead(dev);
-	if (dev->ctrl.state == NVME_CTRL_LIVE ||
-	    dev->ctrl.state == NVME_CTRL_RESETTING) {
+	if (state == NVME_CTRL_LIVE || state == NVME_CTRL_RESETTING) {
 		if (pci_is_enabled(pdev))
 			nvme_start_freeze(&dev->ctrl);
 		/*
@@ -2691,7 +2691,7 @@ static void nvme_reset_work(struct work_struct *work)
 	bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL);
 	int result;
 
-	if (dev->ctrl.state != NVME_CTRL_RESETTING) {
+	if (nvme_ctrl_state(&dev->ctrl) != NVME_CTRL_RESETTING) {
 		dev_warn(dev->ctrl.device, "ctrl state %d is not RESETTING\n",
 			 dev->ctrl.state);
 		result = -ENODEV;
@@ -3193,7 +3193,7 @@ static int nvme_suspend(struct device *dev)
 	nvme_wait_freeze(ctrl);
 	nvme_sync_queues(ctrl);
 
-	if (ctrl->state != NVME_CTRL_LIVE)
+	if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE)
 		goto unfreeze;
 
 	/*
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index a7fea4cbacd75..c04317a966b38 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -984,10 +984,11 @@ static void nvme_rdma_free_ctrl(struct nvme_ctrl *nctrl)
 
 static void nvme_rdma_reconnect_or_remove(struct nvme_rdma_ctrl *ctrl)
 {
+	enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl);
+
 	/* If we are resetting/deleting then do nothing */
-	if (ctrl->ctrl.state != NVME_CTRL_CONNECTING) {
-		WARN_ON_ONCE(ctrl->ctrl.state == NVME_CTRL_NEW ||
-			ctrl->ctrl.state == NVME_CTRL_LIVE);
+	if (state != NVME_CTRL_CONNECTING) {
+		WARN_ON_ONCE(state == NVME_CTRL_NEW || state == NVME_CTRL_LIVE);
 		return;
 	}
 
@@ -1059,8 +1060,10 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
 		 * unless we're during creation of a new controller to
 		 * avoid races with teardown flow.
 		 */
-		WARN_ON_ONCE(ctrl->ctrl.state != NVME_CTRL_DELETING &&
-			     ctrl->ctrl.state != NVME_CTRL_DELETING_NOIO);
+		enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl);
+
+		WARN_ON_ONCE(state != NVME_CTRL_DELETING &&
+			     state != NVME_CTRL_DELETING_NOIO);
 		WARN_ON_ONCE(new);
 		ret = -EINVAL;
 		goto destroy_io;
@@ -1128,8 +1131,10 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work)
 
 	if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) {
 		/* state change failure is ok if we started ctrl delete */
-		WARN_ON_ONCE(ctrl->ctrl.state != NVME_CTRL_DELETING &&
-			     ctrl->ctrl.state != NVME_CTRL_DELETING_NOIO);
+		enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl);
+
+		WARN_ON_ONCE(state != NVME_CTRL_DELETING &&
+			     state != NVME_CTRL_DELETING_NOIO);
 		return;
 	}
 
@@ -1161,7 +1166,7 @@ static void nvme_rdma_wr_error(struct ib_cq *cq, struct ib_wc *wc,
 	struct nvme_rdma_queue *queue = wc->qp->qp_context;
 	struct nvme_rdma_ctrl *ctrl = queue->ctrl;
 
-	if (ctrl->ctrl.state == NVME_CTRL_LIVE)
+	if (nvme_ctrl_state(&ctrl->ctrl) == NVME_CTRL_LIVE)
 		dev_info(ctrl->ctrl.device,
 			     "%s for CQE 0x%p failed with status %s (%d)\n",
 			     op, wc->wr_cqe,
@@ -1944,7 +1949,7 @@ static enum blk_eh_timer_return nvme_rdma_timeout(struct request *rq)
 	dev_warn(ctrl->ctrl.device, "I/O %d QID %d timeout\n",
 		 rq->tag, nvme_rdma_queue_idx(queue));
 
-	if (ctrl->ctrl.state != NVME_CTRL_LIVE) {
+	if (nvme_ctrl_state(&ctrl->ctrl) != NVME_CTRL_LIVE) {
 		/*
 		 * If we are resetting, connecting or deleting we should
 		 * complete immediately because we may block controller
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 5b332d9f87fc3..f1d62d74426f0 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1993,10 +1993,11 @@ static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl,
 
 static void nvme_tcp_reconnect_or_remove(struct nvme_ctrl *ctrl)
 {
+	enum nvme_ctrl_state state = nvme_ctrl_state(ctrl);
+
 	/* If we are resetting/deleting then do nothing */
-	if (ctrl->state != NVME_CTRL_CONNECTING) {
-		WARN_ON_ONCE(ctrl->state == NVME_CTRL_NEW ||
-			ctrl->state == NVME_CTRL_LIVE);
+	if (state != NVME_CTRL_CONNECTING) {
+		WARN_ON_ONCE(state == NVME_CTRL_NEW || state == NVME_CTRL_LIVE);
 		return;
 	}
 
@@ -2056,8 +2057,10 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new)
 		 * unless we're during creation of a new controller to
 		 * avoid races with teardown flow.
 		 */
-		WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING &&
-			     ctrl->state != NVME_CTRL_DELETING_NOIO);
+		enum nvme_ctrl_state state = nvme_ctrl_state(ctrl);
+
+		WARN_ON_ONCE(state != NVME_CTRL_DELETING &&
+			     state != NVME_CTRL_DELETING_NOIO);
 		WARN_ON_ONCE(new);
 		ret = -EINVAL;
 		goto destroy_io;
@@ -2124,8 +2127,10 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 
 	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_CONNECTING)) {
 		/* state change failure is ok if we started ctrl delete */
-		WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING &&
-			     ctrl->state != NVME_CTRL_DELETING_NOIO);
+		enum nvme_ctrl_state state = nvme_ctrl_state(ctrl);
+
+		WARN_ON_ONCE(state != NVME_CTRL_DELETING &&
+			     state != NVME_CTRL_DELETING_NOIO);
 		return;
 	}
 
@@ -2155,8 +2160,10 @@ static void nvme_reset_ctrl_work(struct work_struct *work)
 
 	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_CONNECTING)) {
 		/* state change failure is ok if we started ctrl delete */
-		WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING &&
-			     ctrl->state != NVME_CTRL_DELETING_NOIO);
+		enum nvme_ctrl_state state = nvme_ctrl_state(ctrl);
+
+		WARN_ON_ONCE(state != NVME_CTRL_DELETING &&
+			     state != NVME_CTRL_DELETING_NOIO);
 		return;
 	}
 
@@ -2274,7 +2281,7 @@ static enum blk_eh_timer_return nvme_tcp_timeout(struct request *rq)
 		nvme_tcp_queue_id(req->queue), nvme_cid(rq), pdu->hdr.type,
 		opc, nvme_opcode_str(qid, opc, fctype));
 
-	if (ctrl->state != NVME_CTRL_LIVE) {
+	if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE) {
 		/*
 		 * If we are resetting, connecting or deleting we should
 		 * complete immediately because we may block controller
-- 
2.42.0

[PATCH AUTOSEL 6.6 32/47] nvme-ioctl: move capable() admin check to the end

[Sasha Levin]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit 7be866b1cf0bf1dfa74480fe8097daeceda68622 ]

This can be an expensive call on some kernel configs. Move it to the end
after checking the cheaper ways to determine if the command is allowed.

Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/ioctl.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 529b9954d2b8c..4939ed35638f1 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -18,15 +18,12 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 {
 	u32 effects;
 
-	if (capable(CAP_SYS_ADMIN))
-		return true;
-
 	/*
 	 * Do not allow unprivileged passthrough on partitions, as that allows an
 	 * escape from the containment of the partition.
 	 */
 	if (flags & NVME_IOCTL_PARTITION)
-		return false;
+		goto admin;
 
 	/*
 	 * Do not allow unprivileged processes to send vendor specific or fabrics
@@ -34,7 +31,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 	 */
 	if (c->common.opcode >= nvme_cmd_vendor_start ||
 	    c->common.opcode == nvme_fabrics_command)
-		return false;
+		goto admin;
 
 	/*
 	 * Do not allow unprivileged passthrough of admin commands except
@@ -53,7 +50,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 				return true;
 			}
 		}
-		return false;
+		goto admin;
 	}
 
 	/*
@@ -63,7 +60,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 	 */
 	effects = nvme_command_effects(ns->ctrl, ns, c->common.opcode);
 	if (!(effects & NVME_CMD_EFFECTS_CSUPP))
-		return false;
+		goto admin;
 
 	/*
 	 * Don't allow passthrough for command that have intrusive (or unknown)
@@ -72,16 +69,20 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c,
 	if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
 			NVME_CMD_EFFECTS_UUID_SEL |
 			NVME_CMD_EFFECTS_SCOPE_MASK))
-		return false;
+		goto admin;
 
 	/*
 	 * Only allow I/O commands that transfer data to the controller or that
 	 * change the logical block contents if the file descriptor is open for
 	 * writing.
 	 */
-	if (nvme_is_write(c) || (effects & NVME_CMD_EFFECTS_LBCC))
-		return open_for_write;
+	if ((nvme_is_write(c) || (effects & NVME_CMD_EFFECTS_LBCC)) &&
+	    !open_for_write)
+		goto admin;
+
 	return true;
+admin:
+	return capable(CAP_SYS_ADMIN);
 }
 
 /*
-- 
2.42.0

[PATCH AUTOSEL 6.6 33/47] nvme: prevent potential spectre v1 gadget

[Sasha Levin]

From: Nitesh Shetty <nj.shetty@samsung.com>

[ Upstream commit 20dc66f2d76b4a410df14e4675e373b718babc34 ]

This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to  user space
via speculative execution by using array_index_nospec.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/configfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 907143870da52..01b2a3d1a5e6c 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -17,6 +17,7 @@
 #endif
 #include <crypto/hash.h>
 #include <crypto/kpp.h>
+#include <linux/nospec.h>
 
 #include "nvmet.h"
 
@@ -509,6 +510,7 @@ static ssize_t nvmet_ns_ana_grpid_store(struct config_item *item,
 
 	down_write(&nvmet_ana_sem);
 	oldgrpid = ns->anagrpid;
+	newgrpid = array_index_nospec(newgrpid, NVMET_MAX_ANAGRPS);
 	nvmet_ana_group_enabled[newgrpid]++;
 	ns->anagrpid = newgrpid;
 	nvmet_ana_group_enabled[oldgrpid]--;
@@ -1700,6 +1702,7 @@ static struct config_group *nvmet_ana_groups_make_group(
 	grp->grpid = grpid;
 
 	down_write(&nvmet_ana_sem);
+	grpid = array_index_nospec(grpid, NVMET_MAX_ANAGRPS);
 	nvmet_ana_group_enabled[grpid]++;
 	up_write(&nvmet_ana_sem);
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 34/47] nvme: fix deadlock between reset and scan

[Sasha Levin]

From: Bitao Hu <yaoma@linux.alibaba.com>

[ Upstream commit 839a40d1e730977d4448d141fa653517c2959a88 ]

If controller reset occurs when allocating namespace, both
nvme_reset_work and nvme_scan_work will hang, as shown below.

Test Scripts:

    for ((t=1;t<=128;t++))
    do
    nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \
    -d 0 | awk -F: '{print($NF);}'`
    nvme attach-ns /dev/nvme1 -n $nsid -c 0
    done
    nvme reset /dev/nvme1

We will find that both nvme_reset_work and nvme_scan_work hung:

    INFO: task kworker/u249:4:17848 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:kworker/u249:4  state:D stack:    0 pid:17848 ppid:     2
    flags:0x00000028
    Workqueue: nvme-reset-wq nvme_reset_work [nvme]
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    blk_mq_freeze_queue_wait+0x84/0xc0
    nvme_wait_freeze+0x40/0x64 [nvme_core]
    nvme_reset_work+0x1c0/0x5cc [nvme]
    process_one_work+0x1d8/0x4b0
    worker_thread+0x230/0x440
    kthread+0x114/0x120
    INFO: task kworker/u249:3:22404 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:kworker/u249:3  state:D stack:    0 pid:22404 ppid:     2
    flags:0x00000028
    Workqueue: nvme-wq nvme_scan_work [nvme_core]
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    rwsem_down_write_slowpath+0x32c/0x98c
    down_write+0x70/0x80
    nvme_alloc_ns+0x1ac/0x38c [nvme_core]
    nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core]
    nvme_scan_ns_list+0xe8/0x2e4 [nvme_core]
    nvme_scan_work+0x60/0x500 [nvme_core]
    process_one_work+0x1d8/0x4b0
    worker_thread+0x260/0x440
    kthread+0x114/0x120
    INFO: task nvme:28428 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:nvme            state:D stack:    0 pid:28428 ppid: 27119
    flags:0x00000000
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    schedule_timeout+0x160/0x194
    do_wait_for_common+0xac/0x1d0
    __wait_for_common+0x78/0x100
    wait_for_completion+0x24/0x30
    __flush_work.isra.0+0x74/0x90
    flush_work+0x14/0x20
    nvme_reset_ctrl_sync+0x50/0x74 [nvme_core]
    nvme_dev_ioctl+0x1b0/0x250 [nvme_core]
    __arm64_sys_ioctl+0xa8/0xf0
    el0_svc_common+0x88/0x234
    do_el0_svc+0x7c/0x90
    el0_svc+0x1c/0x30
    el0_sync_handler+0xa8/0xb0
    el0_sync+0x148/0x180

The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!

PROCESS1                         PROCESS2
==============                   ==============
nvme_scan_work
  ...                            nvme_reset_work
  nvme_validate_or_alloc_ns        nvme_dev_disable
    nvme_alloc_ns                    nvme_start_freeze
     down_write                      ...
     nvme_ns_add_to_ctrl_list        ...
     up_write                      nvme_wait_freeze
    ...                              down_read
    nvme_alloc_ns                    blk_mq_freeze_queue_wait
     down_write

Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).

Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 10 ++++++++++
 drivers/nvme/host/nvme.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 4e7bda7749caa..d5bfb6db5a1cc 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3641,6 +3641,14 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, struct nvme_ns_info *info)
 		goto out_unlink_ns;
 
 	down_write(&ctrl->namespaces_rwsem);
+	/*
+	 * Ensure that no namespaces are added to the ctrl list after the queues
+	 * are frozen, thereby avoiding a deadlock between scan and reset.
+	 */
+	if (test_bit(NVME_CTRL_FROZEN, &ctrl->flags)) {
+		up_write(&ctrl->namespaces_rwsem);
+		goto out_unlink_ns;
+	}
 	nvme_ns_add_to_ctrl_list(ns);
 	up_write(&ctrl->namespaces_rwsem);
 	nvme_get_ctrl(ctrl);
@@ -4550,6 +4558,7 @@ void nvme_unfreeze(struct nvme_ctrl *ctrl)
 	list_for_each_entry(ns, &ctrl->namespaces, list)
 		blk_mq_unfreeze_queue(ns->queue);
 	up_read(&ctrl->namespaces_rwsem);
+	clear_bit(NVME_CTRL_FROZEN, &ctrl->flags);
 }
 EXPORT_SYMBOL_GPL(nvme_unfreeze);
 
@@ -4583,6 +4592,7 @@ void nvme_start_freeze(struct nvme_ctrl *ctrl)
 {
 	struct nvme_ns *ns;
 
+	set_bit(NVME_CTRL_FROZEN, &ctrl->flags);
 	down_read(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list)
 		blk_freeze_queue_start(ns->queue);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 68313148e6ed5..bc6d6eabab66b 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -251,6 +251,7 @@ enum nvme_ctrl_flags {
 	NVME_CTRL_STOPPED		= 3,
 	NVME_CTRL_SKIP_ID_CNS_CS	= 4,
 	NVME_CTRL_DIRTY_CAPABILITY	= 5,
+	NVME_CTRL_FROZEN		= 6,
 };
 
 struct nvme_ctrl {
-- 
2.42.0

[PATCH AUTOSEL 6.6 35/47] arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit c13c823a78b77ea0e5f1f73112d910e259911101 ]

The rk3399-gru PCI node addresses are wrong.

In rk3399-gru-scarlet, the bus number in the address should be 0. This is
because bus number assignment is dynamic and not known up front. For FDT,
the bus number is simply ignored.

In rk3399-gru-chromebook, the addresses are simply invalid. The first
"reg" entry must be the configuration space for the device. The entry
should be all 0s except for device/slot and function numbers. The existing
64-bit memory space (0x83000000) entries are not valid because they must
have the BAR address in the lower byte of the first cell.

Warnings for these are enabled by adding the missing 'device_type = "pci"'
for the root port node.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231130191830.2424361-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi  | 3 +--
 arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi             | 1 +
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 5c1929d41cc0b..cacbad35cfc85 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -509,8 +509,7 @@ wacky_spi_audio: spi2@0 {
 &pci_rootport {
 	mvl_wifi: wifi@0,0 {
 		compatible = "pci1b4b,2b42";
-		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
-		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		reg = <0x0000 0x0 0x0 0x0 0x0>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
index 853e88455e750..9e4b12ed62cbe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -34,8 +34,8 @@ &mipi_panel {
 &pci_rootport {
 	wifi@0,0 {
 		compatible = "qcom,ath10k";
-		reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>,
-		      <0x03010010 0x0 0x00000000 0x0 0x00200000>;
+		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
+		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
 		qcom,ath10k-calibration-variant = "GO_DUMO";
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index c9bf1d5c3a426..789fd0dcc88ba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -489,6 +489,7 @@ pci_rootport: pcie@0,0 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
+		device_type = "pci";
 	};
 };
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 36/47] mips/smp: Call rcutree_report_cpu_starting() earlier

[Sasha Levin]

From: Stefan Wiehler <stefan.wiehler@nokia.com>

[ Upstream commit 55702ec9603ebeffb15e6f7b113623fe1d8872f4 ]

rcutree_report_cpu_starting() must be called before
clockevents_register_device() to avoid the following lockdep splat triggered by
calling list_add() when CONFIG_PROVE_RCU_LIST=y:

  WARNING: suspicious RCU usage
  ...
  -----------------------------
  kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1
  no locks held by swapper/1/0.
  ...
  Call Trace:
  [<ffffffff8012a434>] show_stack+0x64/0x158
  [<ffffffff80a93d98>] dump_stack_lvl+0x90/0xc4
  [<ffffffff801c9e9c>] __lock_acquire+0x1404/0x2940
  [<ffffffff801cbf3c>] lock_acquire+0x14c/0x448
  [<ffffffff80aa4260>] _raw_spin_lock_irqsave+0x50/0x88
  [<ffffffff8021e0c8>] clockevents_register_device+0x60/0x1e8
  [<ffffffff80130ff0>] r4k_clockevent_init+0x220/0x3a0
  [<ffffffff801339d0>] start_secondary+0x50/0x3b8

raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.

See also commit 29368e093921 ("x86/smpboot:  Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").

Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/smp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 8fbef537fb885..82e2e051b4161 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -351,10 +351,11 @@ early_initcall(mips_smp_ipi_init);
  */
 asmlinkage void start_secondary(void)
 {
-	unsigned int cpu;
+	unsigned int cpu = raw_smp_processor_id();
 
 	cpu_probe();
 	per_cpu_trap_init(false);
+	rcutree_report_cpu_starting(cpu);
 	mips_clockevent_init();
 	mp_ops->init_secondary();
 	cpu_report();
@@ -366,7 +367,6 @@ asmlinkage void start_secondary(void)
 	 */
 
 	calibrate_delay();
-	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
 	set_cpu_sibling_map(cpu);
-- 
2.42.0

[PATCH AUTOSEL 6.6 37/47] r8152: add vendor/device ID pair for ASUS USB-C2500

[Sasha Levin]

From: Kelly Kane <kelly@hawknetworks.com>

[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ]

The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c   | 1 +
 include/linux/usb/r8152.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index be18d72cefcce..7a669f2c77fc0 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -10001,6 +10001,7 @@ static const struct usb_device_id rtl8152_table[] = {
 	{ USB_DEVICE(VENDOR_ID_NVIDIA,  0x09ff) },
 	{ USB_DEVICE(VENDOR_ID_TPLINK,  0x0601) },
 	{ USB_DEVICE(VENDOR_ID_DLINK,   0xb301) },
+	{ USB_DEVICE(VENDOR_ID_ASUS,    0x1976) },
 	{}
 };
 
diff --git a/include/linux/usb/r8152.h b/include/linux/usb/r8152.h
index 287e9d83fb8bc..33a4c146dc19c 100644
--- a/include/linux/usb/r8152.h
+++ b/include/linux/usb/r8152.h
@@ -30,6 +30,7 @@
 #define VENDOR_ID_NVIDIA		0x0955
 #define VENDOR_ID_TPLINK		0x2357
 #define VENDOR_ID_DLINK			0x2001
+#define VENDOR_ID_ASUS			0x0b05
 
 #if IS_REACHABLE(CONFIG_USB_RTL8152)
 extern u8 rtl8152_get_version(struct usb_interface *intf);
-- 
2.42.0

[PATCH AUTOSEL 6.6 38/47] drm/amd/display: Use channel_width = 2 for vram table 3.0

[Sasha Levin]

From: Alvin Lee <alvin.lee2@amd.com>

[ Upstream commit fec05adc40c25a028c9dfa9d540f800a2d433f80 ]

VBIOS has suggested to use channel_width=2 for any ASIC that uses vram
info 3.0. This is because channel_width in the vram table no longer
represents the memory width

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 484d62bcf2c2e..c523561471484 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -2398,7 +2398,13 @@ static enum bp_result get_vram_info_v30(
 		return BP_RESULT_BADBIOSTABLE;
 
 	info->num_chans = info_v30->channel_num;
-	info->dram_channel_width_bytes = (1 << info_v30->channel_width) / 8;
+	/* As suggested by VBIOS we should always use
+	 * dram_channel_width_bytes = 2 when using VRAM
+	 * table version 3.0. This is because the channel_width
+	 * param in the VRAM info table is changed in 7000 series and
+	 * no longer represents the memory channel width.
+	 */
+	info->dram_channel_width_bytes = 2;
 
 	return result;
 }
-- 
2.42.0

[PATCH AUTOSEL 6.6 39/47] drm/amd/display: Add monitor patch for specific eDP

[Sasha Levin]

From: Ivan Lipski <ivlipski@amd.com>

[ Upstream commit 3d71a8726e05a35beb9de394e86ce896d69e563f ]

[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random.  It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.

[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index 4b230933b28eb..87a1000b85729 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -63,6 +63,12 @@ static void apply_edid_quirks(struct edid *edid, struct dc_edid_caps *edid_caps)
 		DRM_DEBUG_DRIVER("Disabling FAMS on monitor with panel id %X\n", panel_id);
 		edid_caps->panel_patch.disable_fams = true;
 		break;
+	/* Workaround for some monitors that do not clear DPCD 0x317 if FreeSync is unsupported */
+	case drm_edid_encode_panel_id('A', 'U', 'O', 0xA7AB):
+	case drm_edid_encode_panel_id('A', 'U', 'O', 0xE69B):
+		DRM_DEBUG_DRIVER("Clearing DPCD 0x317 on monitor with panel id %X\n", panel_id);
+		edid_caps->panel_patch.remove_sink_ext_caps = true;
+		break;
 	default:
 		return;
 	}
-- 
2.42.0

[PATCH AUTOSEL 6.6 40/47] drm/amdgpu: Add NULL checks for function pointers

[Sasha Levin]

From: Lijo Lazar <lijo.lazar@amd.com>

[ Upstream commit 81577503efb49f4ad76af22f9941d72900ef4aab ]

Check if function is implemented before making the call.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/soc15.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index f5be40d7ba367..e9c42186a6a25 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1416,9 +1416,11 @@ static void soc15_common_get_clockgating_state(void *handle, u64 *flags)
 	if (amdgpu_sriov_vf(adev))
 		*flags = 0;
 
-	adev->nbio.funcs->get_clockgating_state(adev, flags);
+	if (adev->nbio.funcs && adev->nbio.funcs->get_clockgating_state)
+		adev->nbio.funcs->get_clockgating_state(adev, flags);
 
-	adev->hdp.funcs->get_clock_gating_state(adev, flags);
+	if (adev->hdp.funcs && adev->hdp.funcs->get_clock_gating_state)
+		adev->hdp.funcs->get_clock_gating_state(adev, flags);
 
 	if (adev->ip_versions[MP0_HWIP][0] != IP_VERSION(13, 0, 2)) {
 
@@ -1434,9 +1436,11 @@ static void soc15_common_get_clockgating_state(void *handle, u64 *flags)
 	}
 
 	/* AMD_CG_SUPPORT_ROM_MGCG */
-	adev->smuio.funcs->get_clock_gating_state(adev, flags);
+	if (adev->smuio.funcs && adev->smuio.funcs->get_clock_gating_state)
+		adev->smuio.funcs->get_clock_gating_state(adev, flags);
 
-	adev->df.funcs->get_clockgating_state(adev, flags);
+	if (adev->df.funcs && adev->df.funcs->get_clockgating_state)
+		adev->df.funcs->get_clockgating_state(adev, flags);
 }
 
 static int soc15_common_set_powergating_state(void *handle,
-- 
2.42.0

[PATCH AUTOSEL 6.6 41/47] drm/exynos: fix a potential error pointer dereference

[Sasha Levin]

From: Xiang Yang <xiangyang3@huawei.com>

[ Upstream commit 73bf1c9ae6c054c53b8e84452c5e46f86dd28246 ]

Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()

The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.

Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index f3aaa4ea3e682..dd9903eab563e 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1861,6 +1861,8 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 
 	crtc = exynos_drm_crtc_get_by_type(drm_dev, EXYNOS_DISPLAY_TYPE_HDMI);
+	if (IS_ERR(crtc))
+		return PTR_ERR(crtc);
 	crtc->pipe_clk = &hdata->phy_clk;
 
 	ret = hdmi_create_connector(encoder);
-- 
2.42.0

[PATCH AUTOSEL 6.6 42/47] drm/exynos: fix a wrong error checking

[Sasha Levin]

From: Inki Dae <inki.dae@samsung.com>

[ Upstream commit 8d1b7809684c688005706125b804e1f9792d2b1b ]

Fix a wrong error checking in exynos_drm_dma.c module.

In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.

However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.

This issue[1] was reported by Dan.

Changelog v1:
- fix build warning.

[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/

Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_dma.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c
index a971590b81323..e2c7373f20c6b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dma.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c
@@ -107,18 +107,16 @@ int exynos_drm_register_dma(struct drm_device *drm, struct device *dev,
 		return 0;
 
 	if (!priv->mapping) {
-		void *mapping;
+		void *mapping = NULL;
 
 		if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
 			mapping = arm_iommu_create_mapping(&platform_bus_type,
 				EXYNOS_DEV_ADDR_START, EXYNOS_DEV_ADDR_SIZE);
 		else if (IS_ENABLED(CONFIG_IOMMU_DMA))
 			mapping = iommu_get_domain_for_dev(priv->dma_dev);
-		else
-			mapping = ERR_PTR(-ENODEV);
 
-		if (IS_ERR(mapping))
-			return PTR_ERR(mapping);
+		if (!mapping)
+			return -ENODEV;
 		priv->mapping = mapping;
 	}
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 43/47] ALSA: pcmtest: stop timer before buffer is released

[Sasha Levin]

From: Ivan Orlov <ivan.orlov0322@gmail.com>

[ Upstream commit eb99b1b72a424a79f56c972e0fd7ad01fe93a008 ]

Stop timer in the 'trigger' and 'sync_stop' callbacks since we want
the timer to be stopped before the DMA buffer is released. Otherwise,
it could trigger a kernel panic in some circumstances, for instance
when the DMA buffer is already released but the timer callback is
still running.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20231206223211.12761-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/drivers/pcmtest.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/sound/drivers/pcmtest.c b/sound/drivers/pcmtest.c
index b59b78a092240..b8bff5522bce2 100644
--- a/sound/drivers/pcmtest.c
+++ b/sound/drivers/pcmtest.c
@@ -397,7 +397,6 @@ static int snd_pcmtst_pcm_close(struct snd_pcm_substream *substream)
 	struct pcmtst_buf_iter *v_iter = substream->runtime->private_data;
 
 	timer_shutdown_sync(&v_iter->timer_instance);
-	v_iter->substream = NULL;
 	playback_capture_test = !v_iter->is_buf_corrupted;
 	kfree(v_iter);
 	return 0;
@@ -435,6 +434,7 @@ static int snd_pcmtst_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		// We can't call timer_shutdown_sync here, as it is forbidden to sleep here
 		v_iter->suspend = true;
+		timer_delete(&v_iter->timer_instance);
 		break;
 	}
 
@@ -512,12 +512,22 @@ static int snd_pcmtst_ioctl(struct snd_pcm_substream *substream, unsigned int cm
 	return snd_pcm_lib_ioctl(substream, cmd, arg);
 }
 
+static int snd_pcmtst_sync_stop(struct snd_pcm_substream *substream)
+{
+	struct pcmtst_buf_iter *v_iter = substream->runtime->private_data;
+
+	timer_delete_sync(&v_iter->timer_instance);
+
+	return 0;
+}
+
 static const struct snd_pcm_ops snd_pcmtst_playback_ops = {
 	.open =		snd_pcmtst_pcm_open,
 	.close =	snd_pcmtst_pcm_close,
 	.trigger =	snd_pcmtst_pcm_trigger,
 	.hw_params =	snd_pcmtst_pcm_hw_params,
 	.ioctl =	snd_pcmtst_ioctl,
+	.sync_stop =	snd_pcmtst_sync_stop,
 	.hw_free =	snd_pcmtst_pcm_hw_free,
 	.prepare =	snd_pcmtst_pcm_prepare,
 	.pointer =	snd_pcmtst_pcm_pointer,
@@ -530,6 +540,7 @@ static const struct snd_pcm_ops snd_pcmtst_capture_ops = {
 	.hw_params =	snd_pcmtst_pcm_hw_params,
 	.hw_free =	snd_pcmtst_pcm_hw_free,
 	.ioctl =	snd_pcmtst_ioctl,
+	.sync_stop =	snd_pcmtst_sync_stop,
 	.prepare =	snd_pcmtst_pcm_prepare,
 	.pointer =	snd_pcmtst_pcm_pointer,
 };
-- 
2.42.0

[PATCH AUTOSEL 6.6 44/47] hwmon: (corsair-psu) Fix probe when built-in

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit 307004e8b254ad28e150b63f299ab9caa4bc7c3e ]

It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
 but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/corsair-psu.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 904890598c116..2c7c92272fe39 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -899,7 +899,23 @@ static struct hid_driver corsairpsu_driver = {
 	.reset_resume	= corsairpsu_resume,
 #endif
 };
-module_hid_driver(corsairpsu_driver);
+
+static int __init corsair_init(void)
+{
+	return hid_register_driver(&corsairpsu_driver);
+}
+
+static void __exit corsair_exit(void)
+{
+	hid_unregister_driver(&corsairpsu_driver);
+}
+
+/*
+ * With module_init() the driver would load before the HID bus when
+ * built-in, so use late_initcall() instead.
+ */
+late_initcall(corsair_init);
+module_exit(corsair_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Wilken Gottwalt <wilken.gottwalt@posteo.net>");
-- 
2.42.0

[PATCH AUTOSEL 6.6 45/47] LoongArch: Apply dynamic relocations for LLD

[Sasha Levin]

From: WANG Rui <wangrui@loongson.cn>

[ Upstream commit eea673e9d5ea994c60b550ffb684413d3759b3f4 ]

For the following assembly code:

     .text
     .global func
 func:
     nop

     .data
 var:
     .dword func

When linked with `-pie`, GNU LD populates the `var` variable with the
pre-relocated value of `func`. However, LLVM LLD does not exhibit the
same behavior. This issue also arises with the `kernel_entry` in arch/
loongarch/kernel/head.S:

 _head:
     .word   MZ_MAGIC                /* "MZ", MS-DOS header */
     .org    0x8
     .dword  kernel_entry            /* Kernel entry point */

The correct kernel entry from the MS-DOS header is crucial for jumping
to vmlinux from zboot. This necessity is why the compressed relocatable
kernel compiled by Clang encounters difficulties in booting.

To address this problem, it is proposed to apply dynamic relocations to
place with `--apply-dynamic-relocs`.

Link: https://github.com/ClangBuiltLinux/linux/issues/1962
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index fb0fada43197e..390867fc45b84 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -80,7 +80,7 @@ endif
 
 ifeq ($(CONFIG_RELOCATABLE),y)
 KBUILD_CFLAGS_KERNEL		+= -fPIE
-LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext
+LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
 endif
 
 cflags-y += $(call cc-option, -mno-check-zero-division)
-- 
2.42.0

[PATCH AUTOSEL 6.6 46/47] LoongArch: Set unwind stack type to unknown rather than set error flag

[Sasha Levin]

From: Jinyang He <hejinyang@loongson.cn>

[ Upstream commit 97ceddbc9404a7d1e2c4049435bff29427d762cc ]

During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.

Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/kernel/stacktrace.c      | 2 +-
 arch/loongarch/kernel/unwind.c          | 1 -
 arch/loongarch/kernel/unwind_prologue.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c
index 92270f14db948..f623feb2129f1 100644
--- a/arch/loongarch/kernel/stacktrace.c
+++ b/arch/loongarch/kernel/stacktrace.c
@@ -32,7 +32,7 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie,
 	}
 
 	for (unwind_start(&state, task, regs);
-	     !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) {
+	     !unwind_done(&state); unwind_next_frame(&state)) {
 		addr = unwind_get_return_address(&state);
 		if (!addr || !consume_entry(cookie, addr))
 			break;
diff --git a/arch/loongarch/kernel/unwind.c b/arch/loongarch/kernel/unwind.c
index ba324ba76fa15..a463d6961344c 100644
--- a/arch/loongarch/kernel/unwind.c
+++ b/arch/loongarch/kernel/unwind.c
@@ -28,6 +28,5 @@ bool default_next_frame(struct unwind_state *state)
 
 	} while (!get_stack_info(state->sp, state->task, info));
 
-	state->error = true;
 	return false;
 }
diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c
index 55afc27320e12..929ae240280a5 100644
--- a/arch/loongarch/kernel/unwind_prologue.c
+++ b/arch/loongarch/kernel/unwind_prologue.c
@@ -227,7 +227,7 @@ static bool next_frame(struct unwind_state *state)
 	} while (!get_stack_info(state->sp, state->task, info));
 
 out:
-	state->error = true;
+	state->stack_info.type = STACK_TYPE_UNKNOWN;
 	return false;
 }
 
-- 
2.42.0

[PATCH AUTOSEL 6.6 47/47] LoongArch: Preserve syscall nr across execve()

[Sasha Levin]

From: Hengqi Chen <hengqi.chen@gmail.com>

[ Upstream commit d6c5f06e46a836e6a70c7cfd95bb38a67d9252ec ]

Currently, we store syscall nr in pt_regs::regs[11] and syscall execve()
accidentally overrides it during its execution:

    sys_execve()
      -> do_execve()
        -> do_execveat_common()
          -> bprm_execve()
            -> exec_binprm()
              -> search_binary_handler()
                -> load_elf_binary()
                  -> ELF_PLAT_INIT()

ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode()
we later get a wrong syscall nr. This breaks tools like execsnoop since
it relies on execve() tracepoints.

Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/include/asm/elf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h
index b9a4ab54285c1..9b16a3b8e7060 100644
--- a/arch/loongarch/include/asm/elf.h
+++ b/arch/loongarch/include/asm/elf.h
@@ -293,7 +293,7 @@ extern const char *__elf_platform;
 #define ELF_PLAT_INIT(_r, load_addr)	do { \
 	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
 	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
-	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[9] = _r->regs[10] /* syscall n */ = _r->regs[12] = 0;	\
 	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
 	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
 	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
-- 
2.42.0

Re: [PATCH AUTOSEL 6.6 36/47] mips/smp: Call rcutree_report_cpu_starting() earlier

[Huacai Chen]

Hi, Sasha,

The same with the LoongArch version, rcutree_report_cpu_starting()
only exists since 6.7.

Huacai

On Mon, Dec 11, 2023 at 9:53 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Stefan Wiehler <stefan.wiehler@nokia.com>
>
> [ Upstream commit 55702ec9603ebeffb15e6f7b113623fe1d8872f4 ]
>
> rcutree_report_cpu_starting() must be called before
> clockevents_register_device() to avoid the following lockdep splat triggered by
> calling list_add() when CONFIG_PROVE_RCU_LIST=y:
>
>   WARNING: suspicious RCU usage
>   ...
>   -----------------------------
>   kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!!
>
>   other info that might help us debug this:
>
>   RCU used illegally from offline CPU!
>   rcu_scheduler_active = 1, debug_locks = 1
>   no locks held by swapper/1/0.
>   ...
>   Call Trace:
>   [<ffffffff8012a434>] show_stack+0x64/0x158
>   [<ffffffff80a93d98>] dump_stack_lvl+0x90/0xc4
>   [<ffffffff801c9e9c>] __lock_acquire+0x1404/0x2940
>   [<ffffffff801cbf3c>] lock_acquire+0x14c/0x448
>   [<ffffffff80aa4260>] _raw_spin_lock_irqsave+0x50/0x88
>   [<ffffffff8021e0c8>] clockevents_register_device+0x60/0x1e8
>   [<ffffffff80130ff0>] r4k_clockevent_init+0x220/0x3a0
>   [<ffffffff801339d0>] start_secondary+0x50/0x3b8
>
> raw_smp_processor_id() is required in order to avoid calling into lockdep
> before RCU has declared the CPU to be watched for readers.
>
> See also commit 29368e093921 ("x86/smpboot:  Move rcu_cpu_starting() earlier"),
> commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
> 99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").
>
> Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/mips/kernel/smp.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
> index 8fbef537fb885..82e2e051b4161 100644
> --- a/arch/mips/kernel/smp.c
> +++ b/arch/mips/kernel/smp.c
> @@ -351,10 +351,11 @@ early_initcall(mips_smp_ipi_init);
>   */
>  asmlinkage void start_secondary(void)
>  {
> -       unsigned int cpu;
> +       unsigned int cpu = raw_smp_processor_id();
>
>         cpu_probe();
>         per_cpu_trap_init(false);
> +       rcutree_report_cpu_starting(cpu);
>         mips_clockevent_init();
>         mp_ops->init_secondary();
>         cpu_report();
> @@ -366,7 +367,6 @@ asmlinkage void start_secondary(void)
>          */
>
>         calibrate_delay();
> -       cpu = smp_processor_id();
>         cpu_data[cpu].udelay_val = loops_per_jiffy;
>
>         set_cpu_sibling_map(cpu);
> --
> 2.42.0
>