From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org,
Dan Carpenter <dan.carpenter@linaro.org>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] Input: matrix_keypad - avoid repeatedly converting GPIO to IRQ
Date: Sat, 20 Jan 2024 21:32:28 -0800 [thread overview]
Message-ID: <20240121053232.276968-1-dmitry.torokhov@gmail.com> (raw)
gpio_to_irq() is getting more expensive and may require sleeping.
Convert row GPIOs to interrupt numbers once in probe() and use
this information when the driver needs to enable or disable given
interrupt line.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/keyboard/matrix_keypad.c | 48 ++++++++++++++------------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 50fa764c82d2..1cd1ffb80401 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -27,6 +27,7 @@ struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
struct input_dev *input_dev;
unsigned int row_shift;
+ unsigned int row_irqs[MATRIX_MAX_ROWS];
DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
@@ -92,7 +93,7 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
enable_irq(pdata->clustered_irq);
else {
for (i = 0; i < pdata->num_row_gpios; i++)
- enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+ enable_irq(keypad->row_irqs[i]);
}
}
@@ -105,7 +106,7 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
disable_irq_nosync(pdata->clustered_irq);
else {
for (i = 0; i < pdata->num_row_gpios; i++)
- disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+ disable_irq_nosync(keypad->row_irqs[i]);
}
}
@@ -233,7 +234,6 @@ static void matrix_keypad_stop(struct input_dev *dev)
static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
{
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
- unsigned int gpio;
int i;
if (pdata->clustered_irq > 0) {
@@ -241,21 +241,16 @@ static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
keypad->gpio_all_disabled = true;
} else {
- for (i = 0; i < pdata->num_row_gpios; i++) {
- if (!test_bit(i, keypad->disabled_gpios)) {
- gpio = pdata->row_gpios[i];
-
- if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ if (!test_bit(i, keypad->disabled_gpios))
+ if (enable_irq_wake(keypad->row_irqs[i]) == 0)
__set_bit(i, keypad->disabled_gpios);
- }
- }
}
}
static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
{
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
- unsigned int gpio;
int i;
if (pdata->clustered_irq > 0) {
@@ -264,12 +259,9 @@ static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
keypad->gpio_all_disabled = false;
}
} else {
- for (i = 0; i < pdata->num_row_gpios; i++) {
- if (test_and_clear_bit(i, keypad->disabled_gpios)) {
- gpio = pdata->row_gpios[i];
- disable_irq_wake(gpio_to_irq(gpio));
- }
- }
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ if (test_and_clear_bit(i, keypad->disabled_gpios))
+ disable_irq_wake(keypad->row_irqs[i]);
}
}
@@ -306,7 +298,7 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
struct matrix_keypad *keypad)
{
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
- int i, err;
+ int i, irq, err;
/* initialized strobe lines as outputs, activated */
for (i = 0; i < pdata->num_col_gpios; i++) {
@@ -345,11 +337,19 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
}
} else {
for (i = 0; i < pdata->num_row_gpios; i++) {
- err = request_any_context_irq(
- gpio_to_irq(pdata->row_gpios[i]),
+ irq = gpio_to_irq(pdata->row_gpios[i]);
+ if (irq < 0) {
+ err = irq;
+ dev_err(&pdev->dev,
+ "Unable to convert GPIO line %i to irq: %d\n",
+ pdata->row_gpios[i], err);
+ goto err_free_irqs;
+ }
+
+ err = request_any_context_irq(irq,
matrix_keypad_interrupt,
IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING,
"matrix-keypad", keypad);
if (err < 0) {
dev_err(&pdev->dev,
@@ -357,6 +357,8 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
pdata->row_gpios[i]);
goto err_free_irqs;
}
+
+ keypad->row_irqs[i] = irq;
}
}
@@ -366,7 +368,7 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
err_free_irqs:
while (--i >= 0)
- free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ free_irq(keypad->row_irqs[i], keypad);
i = pdata->num_row_gpios;
err_free_rows:
while (--i >= 0)
@@ -388,7 +390,7 @@ static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
free_irq(pdata->clustered_irq, keypad);
} else {
for (i = 0; i < pdata->num_row_gpios; i++)
- free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ free_irq(keypad->row_irqs[i], keypad);
}
for (i = 0; i < pdata->num_row_gpios; i++)
--
2.43.0.429.g432eaa2c6b-goog
next reply other threads:[~2024-01-21 5:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-21 5:32 Dmitry Torokhov [this message]
2024-01-21 5:32 ` [PATCH 2/3] Input: matrix_keypad - consolidate handling of clustered interrupt Dmitry Torokhov
2024-01-21 5:32 ` [PATCH 3/3] Input: matrix_keypad - switch to using managed resources Dmitry Torokhov
2024-01-22 8:19 ` [PATCH 1/3] Input: matrix_keypad - avoid repeatedly converting GPIO to IRQ Bartosz Golaszewski
2024-01-31 18:48 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240121053232.276968-1-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=dan.carpenter@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox