From: Andrew Davis <afd@ti.com>
To: Bjorn Andersson <andersson@kernel.org>,
Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: <linux-omap@vger.kernel.org>, <linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Andrew Davis <afd@ti.com>
Subject: [PATCH 2/4] hwspinlock: omap: Use devm_pm_runtime_enable() helper
Date: Tue, 23 Jan 2024 10:04:03 -0600 [thread overview]
Message-ID: <20240123160405.360437-2-afd@ti.com> (raw)
In-Reply-To: <20240123160405.360437-1-afd@ti.com>
This disables runtime PM on module exit, allowing us to simplify
the probe exit path and remove callbacks. Do that here.
Signed-off-by: Andrew Davis <afd@ti.com>
---
drivers/hwspinlock/omap_hwspinlock.c | 26 ++++++++------------------
1 file changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index cca55143d24d4..2f18ea6c05e3f 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -89,10 +89,10 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
* make sure the module is enabled and clocked before reading
* the module SYSSTATUS register
*/
- pm_runtime_enable(&pdev->dev);
+ devm_pm_runtime_enable(&pdev->dev);
ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
- goto runtime_err;
+ return ret;
/* Determine number of locks */
i = readl(io_base + SYSSTATUS_OFFSET);
@@ -104,22 +104,18 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
*/
ret = pm_runtime_put(&pdev->dev);
if (ret < 0)
- goto runtime_err;
+ return ret;
/* one of the four lsb's must be set, and nothing else */
- if (hweight_long(i & 0xf) != 1 || i > 8) {
- ret = -EINVAL;
- goto runtime_err;
- }
+ if (hweight_long(i & 0xf) != 1 || i > 8)
+ return -EINVAL;
num_locks = i * 32; /* actual number of locks in this device */
bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
GFP_KERNEL);
- if (!bank) {
- ret = -ENOMEM;
- goto runtime_err;
- }
+ if (!bank)
+ return -ENOMEM;
platform_set_drvdata(pdev, bank);
@@ -129,16 +125,12 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
base_id, num_locks);
if (ret)
- goto runtime_err;
+ return ret;
dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n",
num_locks);
return 0;
-
-runtime_err:
- pm_runtime_disable(&pdev->dev);
- return ret;
}
static void omap_hwspinlock_remove(struct platform_device *pdev)
@@ -151,8 +143,6 @@ static void omap_hwspinlock_remove(struct platform_device *pdev)
dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
return;
}
-
- pm_runtime_disable(&pdev->dev);
}
static const struct of_device_id omap_hwspinlock_of_match[] = {
--
2.39.2
next prev parent reply other threads:[~2024-01-23 16:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-23 16:04 [PATCH 1/4] hwspinlock: omap: Remove unneeded check for OF node Andrew Davis
2024-01-23 16:04 ` Andrew Davis [this message]
2024-02-06 19:06 ` [PATCH 2/4] hwspinlock: omap: Use devm_pm_runtime_enable() helper Bjorn Andersson
2024-02-06 19:07 ` Andrew Davis
2024-01-23 16:04 ` [PATCH 3/4] hwspinlock: omap: Use devm_hwspin_lock_register() helper Andrew Davis
2024-02-06 19:02 ` Bjorn Andersson
2024-01-23 16:04 ` [PATCH 4/4] hwspinlock: omap: Use index to get hwspinlock pointer Andrew Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240123160405.360437-2-afd@ti.com \
--to=afd@ti.com \
--cc=andersson@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox