From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Daniel Stodden <dns@arista.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Logan Gunthorpe <logang@deltatee.com>,
Dmitry Safonov <dima@arista.com>, Sasha Levin <sashal@kernel.org>,
kurt.schwemmer@microsemi.com, linux-pci@vger.kernel.org
Subject: [PATCH AUTOSEL 6.7 02/39] PCI: switchtec: Fix stdev_release() crash after surprise hot remove
Date: Sun, 28 Jan 2024 11:10:22 -0500 [thread overview]
Message-ID: <20240128161130.200783-2-sashal@kernel.org> (raw)
In-Reply-To: <20240128161130.200783-1-sashal@kernel.org>
From: Daniel Stodden <dns@arista.com>
[ Upstream commit df25461119d987b8c81d232cfe4411e91dcabe66 ]
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com
Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/switch/switchtec.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 5b921387eca6..1804794d0e68 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1308,13 +1308,6 @@ static void stdev_release(struct device *dev)
{
struct switchtec_dev *stdev = to_stdev(dev);
- if (stdev->dma_mrpc) {
- iowrite32(0, &stdev->mmio_mrpc->dma_en);
- flush_wc_buf(stdev);
- writeq(0, &stdev->mmio_mrpc->dma_addr);
- dma_free_coherent(&stdev->pdev->dev, sizeof(*stdev->dma_mrpc),
- stdev->dma_mrpc, stdev->dma_mrpc_dma_addr);
- }
kfree(stdev);
}
@@ -1358,7 +1351,7 @@ static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
return ERR_PTR(-ENOMEM);
stdev->alive = true;
- stdev->pdev = pdev;
+ stdev->pdev = pci_dev_get(pdev);
INIT_LIST_HEAD(&stdev->mrpc_queue);
mutex_init(&stdev->mrpc_mutex);
stdev->mrpc_busy = 0;
@@ -1391,6 +1384,7 @@ static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
return stdev;
err_put:
+ pci_dev_put(stdev->pdev);
put_device(&stdev->dev);
return ERR_PTR(rc);
}
@@ -1644,6 +1638,18 @@ static int switchtec_init_pci(struct switchtec_dev *stdev,
return 0;
}
+static void switchtec_exit_pci(struct switchtec_dev *stdev)
+{
+ if (stdev->dma_mrpc) {
+ iowrite32(0, &stdev->mmio_mrpc->dma_en);
+ flush_wc_buf(stdev);
+ writeq(0, &stdev->mmio_mrpc->dma_addr);
+ dma_free_coherent(&stdev->pdev->dev, sizeof(*stdev->dma_mrpc),
+ stdev->dma_mrpc, stdev->dma_mrpc_dma_addr);
+ stdev->dma_mrpc = NULL;
+ }
+}
+
static int switchtec_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
@@ -1703,6 +1709,9 @@ static void switchtec_pci_remove(struct pci_dev *pdev)
ida_free(&switchtec_minor_ida, MINOR(stdev->dev.devt));
dev_info(&stdev->dev, "unregistered.\n");
stdev_kill(stdev);
+ switchtec_exit_pci(stdev);
+ pci_dev_put(stdev->pdev);
+ stdev->pdev = NULL;
put_device(&stdev->dev);
}
--
2.43.0
next prev parent reply other threads:[~2024-01-28 16:11 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-28 16:10 [PATCH AUTOSEL 6.7 01/39] PCI: Only override AMD USB controller if required Sasha Levin
2024-01-28 16:10 ` Sasha Levin [this message]
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 03/39] perf cs-etm: Bump minimum OpenCSD version to ensure a bugfix is present Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 04/39] xhci: fix possible null pointer deref during xhci urb enqueue Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 05/39] extcon: fix possible name leak in extcon_dev_register() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 06/39] usb: hub: Replace hardcoded quirk value with BIT() macro Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 07/39] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 08/39] selftests/sgx: Fix linker script asserts Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 09/39] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 10/39] tty: serial: 8250: Set RS422 interface by default to fix Moxa RS422/RS485 PCIe boards Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 11/39] fs/kernfs/dir: obey S_ISGID Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 12/39] spmi: mediatek: Fix UAF on device remove Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 13/39] ring-buffer: Do no swap cpu buffers if order is different Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 14/39] staging: vme_user: Fix the issue of return the wrong error code Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 15/39] power: supply: qcom_battmgr: Register the power supplies after PDR is up Sasha Levin
2024-01-29 13:03 ` Sebastian Reichel
2024-01-30 23:01 ` Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 16/39] PCI: Fix 64GT/s effective data rate calculation Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 17/39] PCI/AER: Decode Requester ID when no error info found Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 18/39] 9p: Fix initialisation of netfs_inode for 9p Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 19/39] tracefs/eventfs: Use root and instance inodes as default ownership Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 20/39] usb: xhci-plat: fix usb disconnect issue after s4 Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 21/39] misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 22/39] libsubcmd: Fix memory leak in uniq() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 23/39] ASoC: codecs: rtq9128: Fix PM_RUNTIME usage Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 24/39] ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 25/39] drm/amdkfd: Fix lock dependency warning Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 26/39] drm/amd/display: To adjust dprefclk by down spread percentage Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 27/39] Revert "drm/amd/display: Fix conversions between bytes and KB" Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 28/39] drm/amdkfd: Fix lock dependency warning with srcu Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 29/39] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 30/39] blk-mq: fix IO hang from sbitmap wakeup race Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 31/39] ceph: reinitialize mds feature bit even when session in open Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 32/39] ceph: fix deadlock or deadcode of misusing dget() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 33/39] ceph: fix invalid pointer access if get_quota_realm return ERR_PTR Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 34/39] drm/amdgpu: fix avg vs input power reporting on smu7 Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 35/39] drm/amd/powerplay: Fix kzalloc parameter 'ATOM_Tonga_PPM_Table' in 'get_platform_power_management_table()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 36/39] drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 37/39] drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 38/39] drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 39/39] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240128161130.200783-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bhelgaas@google.com \
--cc=dima@arista.com \
--cc=dns@arista.com \
--cc=kurt.schwemmer@microsemi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=logang@deltatee.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox