From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: ChiYuan Huang <cy_huang@richtek.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
oder_chiou@realtek.com, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.com, linux-sound@vger.kernel.org
Subject: [PATCH AUTOSEL 6.7 24/39] ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
Date: Sun, 28 Jan 2024 11:10:44 -0500 [thread overview]
Message-ID: <20240128161130.200783-24-sashal@kernel.org> (raw)
In-Reply-To: <20240128161130.200783-1-sashal@kernel.org>
From: ChiYuan Huang <cy_huang@richtek.com>
[ Upstream commit 415d10ccef712f3ec73cd880c1fef3eb48601c3a ]
To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/rtq9128.c | 67 ++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 31 deletions(-)
diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c
index bda64f9eeb62..aa3eadecd974 100644
--- a/sound/soc/codecs/rtq9128.c
+++ b/sound/soc/codecs/rtq9128.c
@@ -59,6 +59,7 @@
struct rtq9128_data {
struct gpio_desc *enable;
+ unsigned int daifmt;
int tdm_slots;
int tdm_slot_width;
bool tdm_input_data2_select;
@@ -441,10 +442,7 @@ static const struct snd_soc_component_driver rtq9128_comp_driver = {
static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct rtq9128_data *data = snd_soc_dai_get_drvdata(dai);
- struct snd_soc_component *comp = dai->component;
struct device *dev = dai->dev;
- unsigned int audfmt, fmtval;
- int ret;
dev_dbg(dev, "%s: fmt 0x%8x\n", __func__, fmt);
@@ -454,35 +452,10 @@ static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL;
}
- fmtval = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
- if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
- dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
- return -EINVAL;
- }
+ /* Store here and will be used in runtime hw_params for DAI format setting */
+ data->daifmt = fmt;
- switch (fmtval) {
- case SND_SOC_DAIFMT_I2S:
- audfmt = 8;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- audfmt = 9;
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- audfmt = 10;
- break;
- case SND_SOC_DAIFMT_DSP_A:
- audfmt = data->tdm_slots ? 12 : 11;
- break;
- case SND_SOC_DAIFMT_DSP_B:
- audfmt = data->tdm_slots ? 4 : 3;
- break;
- default:
- dev_err(dev, "Unsupported format 0x%8x\n", fmt);
- return -EINVAL;
- }
-
- ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
- return ret < 0 ? ret : 0;
+ return 0;
}
static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
@@ -558,10 +531,38 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
unsigned int width, slot_width, bitrate, audbit, dolen;
struct snd_soc_component *comp = dai->component;
struct device *dev = dai->dev;
+ unsigned int fmtval, audfmt;
int ret;
dev_dbg(dev, "%s: width %d\n", __func__, params_width(param));
+ fmtval = FIELD_GET(SND_SOC_DAIFMT_FORMAT_MASK, data->daifmt);
+ if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
+ dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
+ return -EINVAL;
+ }
+
+ switch (fmtval) {
+ case SND_SOC_DAIFMT_I2S:
+ audfmt = 8;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ audfmt = 9;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ audfmt = 10;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ audfmt = data->tdm_slots ? 12 : 11;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ audfmt = data->tdm_slots ? 4 : 3;
+ break;
+ default:
+ dev_err(dev, "Unsupported format 0x%8x\n", fmtval);
+ return -EINVAL;
+ }
+
switch (width = params_width(param)) {
case 16:
audbit = 0;
@@ -615,6 +616,10 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
return -EINVAL;
}
+ ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDBIT_MASK, audbit);
if (ret < 0)
return ret;
--
2.43.0
next prev parent reply other threads:[~2024-01-28 16:12 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-28 16:10 [PATCH AUTOSEL 6.7 01/39] PCI: Only override AMD USB controller if required Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 02/39] PCI: switchtec: Fix stdev_release() crash after surprise hot remove Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 03/39] perf cs-etm: Bump minimum OpenCSD version to ensure a bugfix is present Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 04/39] xhci: fix possible null pointer deref during xhci urb enqueue Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 05/39] extcon: fix possible name leak in extcon_dev_register() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 06/39] usb: hub: Replace hardcoded quirk value with BIT() macro Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 07/39] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 08/39] selftests/sgx: Fix linker script asserts Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 09/39] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 10/39] tty: serial: 8250: Set RS422 interface by default to fix Moxa RS422/RS485 PCIe boards Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 11/39] fs/kernfs/dir: obey S_ISGID Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 12/39] spmi: mediatek: Fix UAF on device remove Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 13/39] ring-buffer: Do no swap cpu buffers if order is different Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 14/39] staging: vme_user: Fix the issue of return the wrong error code Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 15/39] power: supply: qcom_battmgr: Register the power supplies after PDR is up Sasha Levin
2024-01-29 13:03 ` Sebastian Reichel
2024-01-30 23:01 ` Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 16/39] PCI: Fix 64GT/s effective data rate calculation Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 17/39] PCI/AER: Decode Requester ID when no error info found Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 18/39] 9p: Fix initialisation of netfs_inode for 9p Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 19/39] tracefs/eventfs: Use root and instance inodes as default ownership Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 20/39] usb: xhci-plat: fix usb disconnect issue after s4 Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 21/39] misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 22/39] libsubcmd: Fix memory leak in uniq() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 23/39] ASoC: codecs: rtq9128: Fix PM_RUNTIME usage Sasha Levin
2024-01-28 16:10 ` Sasha Levin [this message]
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 25/39] drm/amdkfd: Fix lock dependency warning Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 26/39] drm/amd/display: To adjust dprefclk by down spread percentage Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 27/39] Revert "drm/amd/display: Fix conversions between bytes and KB" Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 28/39] drm/amdkfd: Fix lock dependency warning with srcu Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 29/39] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 30/39] blk-mq: fix IO hang from sbitmap wakeup race Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 31/39] ceph: reinitialize mds feature bit even when session in open Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 32/39] ceph: fix deadlock or deadcode of misusing dget() Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 33/39] ceph: fix invalid pointer access if get_quota_realm return ERR_PTR Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 34/39] drm/amdgpu: fix avg vs input power reporting on smu7 Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 35/39] drm/amd/powerplay: Fix kzalloc parameter 'ATOM_Tonga_PPM_Table' in 'get_platform_power_management_table()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 36/39] drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 37/39] drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 38/39] drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()' Sasha Levin
2024-01-28 16:10 ` [PATCH AUTOSEL 6.7 39/39] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240128161130.200783-24-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=cy_huang@richtek.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox