* [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver
@ 2024-03-13 7:06 Umang Jain
2024-03-13 7:06 ` [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 Umang Jain
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Umang Jain @ 2024-03-13 7:06 UTC (permalink / raw)
To: linux-media
Cc: Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus,
tomi.valkeinen, Umang Jain, Mauro Carvalho Chehab, Hans Verkuil,
open list
Add a v4l2 subdevice driver for the Sony IMX283 image sensor.
The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with
Square Pixel for Color Cameras.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank/link freq control support
- Test pattern support control
- Arbitrary horizontal and vertical cropping
- Supported resolution:
- 5472x3648 @ 20fps (SRGGB12)
- 5472x3648 @ 25fps (SRGGB10)
- 2736x1824 @ 50fps (SRGGB12)
The driver is tested on mainline branch v6.8-rc2 on IMX8MP Debix-SOM-A.
Additional testing has been done on RPi5 with the downstream BSP.
Changes in v3:
- fix headers includes
- Improve #define(s) readability
- Drop __func__ from error logs
- Use HZ_PER_MHZ instead of MEGA
- mdsel* variables should be u8
- Use container_of_const() instead of container_of()
- Use clamp() used of clamp_t variant
- Use streams API imx283_{enable|disable}_streams (**NOTE**)
- Properly fix PM runtime handling
(pm_ptr(), DEFINE_RUNTIME_DEV_PM_OPS,
imx283_runtime_suspend, imx283_runtime_resume)
- Fix format modifiers, signed-ness at various places
**NOTE**
There is streams mask issue, as no routes are defined with 1 pad:
For testing, I have the following applied locally:
```
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 4c6198c48dd6..38545d779620 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -2115,8 +2115,10 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
if (pad >= sd->entity.num_pads)
return -EINVAL;
- if (!streams_mask)
- return 0;
+ if (!streams_mask) {
+ dev_err(sd->dev, "no streams mask, returning ....\n");
+ //return 0;
+ }
/* Fallback on .s_stream() if .enable_streams() isn't available. */
if (!sd->ops->pad || !sd->ops->pad->enable_streams)
```
changes in v2 (summary):
- Use u32 wherever possible
- Use MEGA macro instead of self defined MHZ() macro
- Properly refine regs using CCI
- Drop tracking of current mode. Shifted to infer from active state directly.
(Laurent's review)
- Cont. from above: Pass the struct imx283_mode to functions whereever required.
- Remove unused comments
- Remove custom mutex. Use control handler one instead.
- Drop imx283_reset_colorspace() and inline
- Set colorspace field properly (drop _DEFAULTS)
- Use __maybe_unused for imx283_power_on() and imx283_power_off()
- Store controls v4l2_ctrl handles for those required, not all.
- Drop imx283_free_controls(). Use v4l2_ctrl_handler_free
- fix reset-gpios handling and add it to DT schema
- fix data-lanes property in DT schema
- fix IMX283 Kconfig
- Remove unused macros
- Alphabetical case consistency
Kieran Bingham (1):
media: i2c: Add imx283 camera sensor driver
Umang Jain (1):
media: dt-bindings: media: Add bindings for IMX283
.../bindings/media/i2c/sony,imx283.yaml | 107 ++
MAINTAINERS | 9 +
drivers/media/i2c/Kconfig | 10 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx283.c | 1596 +++++++++++++++++
5 files changed, 1723 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
create mode 100644 drivers/media/i2c/imx283.c
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 2024-03-13 7:06 [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver Umang Jain @ 2024-03-13 7:06 ` Umang Jain 2024-03-13 21:21 ` Laurent Pinchart 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-19 13:10 ` [PATCH v3 0/2] " Umang Jain 2 siblings, 1 reply; 11+ messages in thread From: Umang Jain @ 2024-03-13 7:06 UTC (permalink / raw) To: linux-media Cc: Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Umang Jain, Rob Herring, Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, open list - Add dt-bindings documentation for Sony IMX283 sensor driver - Add MAINTAINERS entry for Sony IMX283 binding documentation Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/media/i2c/sony,imx283.yaml | 107 ++++++++++++++++++ MAINTAINERS | 8 ++ 2 files changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml new file mode 100644 index 000000000000..e4f49f1435a5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Ideas on Board Oy +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX283 Sensor + +maintainers: + - Kieran Bingham <kieran.bingham@ideasonboard.com> + - Umang Jain <umang.jain@ideasonboard.com> + +description: + IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 5472H x 3648V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx283 + + reg: + maxItems: 1 + + clocks: + description: Clock frequency from 6 to 24 MHz. + maxItems: 1 + + vadd-supply: + description: Analog power supply (2.9V) + + vdd1-supply: + description: Interface power supply (1.8V) + + vdd2-supply: + description: Digital power supply (1.2V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx283"; + reg = <0x1a>; + clocks = <&imx283_clk>; + + assigned-clocks = <&imx283_clk>; + assigned-clock-parents = <&imx283_clk_parent>; + assigned-clock-rates = <12000000>; + + vadd-supply = <&camera_vadd_2v9>; + vdd1-supply = <&camera_vdd1_1v8>; + vdd2-supply = <&camera_vdd2_1v2>; + + port { + imx283: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 73d898383e51..32f790c3a5f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20368,6 +20368,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml F: drivers/media/i2c/imx274.c +SONY IMX283 SENSOR DRIVER +M: Kieran Bingham <kieran.bingham@ideasonboard.com> +M: Umang Jain <umang.jain@ideasonboard.com> +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml + SONY IMX290 SENSOR DRIVER M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> L: linux-media@vger.kernel.org -- 2.43.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 2024-03-13 7:06 ` [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 Umang Jain @ 2024-03-13 21:21 ` Laurent Pinchart 0 siblings, 0 replies; 11+ messages in thread From: Laurent Pinchart @ 2024-03-13 21:21 UTC (permalink / raw) To: Umang Jain Cc: linux-media, Kieran Bingham, willl will, Sakari Ailus, tomi.valkeinen, Rob Herring, Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, open list On Wed, Mar 13, 2024 at 12:36:58PM +0530, Umang Jain wrote: > - Add dt-bindings documentation for Sony IMX283 sensor driver > - Add MAINTAINERS entry for Sony IMX283 binding documentation > > Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../bindings/media/i2c/sony,imx283.yaml | 107 ++++++++++++++++++ > MAINTAINERS | 8 ++ > 2 files changed, 115 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > new file mode 100644 > index 000000000000..e4f49f1435a5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > @@ -0,0 +1,107 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2024 Ideas on Board Oy > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sony IMX283 Sensor > + > +maintainers: > + - Kieran Bingham <kieran.bingham@ideasonboard.com> > + - Umang Jain <umang.jain@ideasonboard.com> > + > +description: > + IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active > + array size of 5472H x 3648V. It is programmable through I2C interface. The > + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is > + sent through MIPI CSI-2. > + > +properties: > + compatible: > + const: sony,imx283 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: Clock frequency from 6 to 24 MHz. > + maxItems: 1 > + > + vadd-supply: > + description: Analog power supply (2.9V) > + > + vdd1-supply: > + description: Interface power supply (1.8V) > + > + vdd2-supply: > + description: Digital power supply (1.2V) Those two supplies are named vddd1 and vddd2 in the datasheet. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > + reset-gpios: > + description: Sensor reset (XCLR) GPIO > + maxItems: 1 > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + anyOf: > + - items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + link-frequencies: true > + > + required: > + - data-lanes > + - link-frequencies > + > + required: > + - endpoint > + > +required: > + - compatible > + - reg > + - clocks > + - port > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@1a { > + compatible = "sony,imx283"; > + reg = <0x1a>; > + clocks = <&imx283_clk>; > + > + assigned-clocks = <&imx283_clk>; > + assigned-clock-parents = <&imx283_clk_parent>; > + assigned-clock-rates = <12000000>; > + > + vadd-supply = <&camera_vadd_2v9>; > + vdd1-supply = <&camera_vdd1_1v8>; > + vdd2-supply = <&camera_vdd2_1v2>; > + > + port { > + imx283: endpoint { > + remote-endpoint = <&cam>; > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <360000000>; > + }; > + }; > + }; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 73d898383e51..32f790c3a5f9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -20368,6 +20368,14 @@ T: git git://linuxtv.org/media_tree.git > F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > F: drivers/media/i2c/imx274.c > > +SONY IMX283 SENSOR DRIVER > +M: Kieran Bingham <kieran.bingham@ideasonboard.com> > +M: Umang Jain <umang.jain@ideasonboard.com> > +L: linux-media@vger.kernel.org > +S: Maintained > +T: git git://linuxtv.org/media_tree.git > +F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > + > SONY IMX290 SENSOR DRIVER > M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > L: linux-media@vger.kernel.org -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 7:06 ` [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 Umang Jain @ 2024-03-13 7:06 ` Umang Jain 2024-03-13 8:55 ` Andy Shevchenko ` (3 more replies) 2024-03-19 13:10 ` [PATCH v3 0/2] " Umang Jain 2 siblings, 4 replies; 11+ messages in thread From: Umang Jain @ 2024-03-13 7:06 UTC (permalink / raw) To: linux-media Cc: Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Umang Jain, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, Andy Shevchenko, open list From: Kieran Bingham <kieran.bingham@ideasonboard.com> Add a v4l2 subdevice driver for the Sony IMX283 image sensor. The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color Cameras. The following features are supported: - Manual exposure an gain control support - vblank/hblank/link freq control support - Test pattern support control - Arbitrary horizontal and vertical cropping - Supported resolution: - 5472x3648 @ 20fps (SRGGB12) - 5472x3648 @ 25fps (SRGGB10) - 2736x1824 @ 50fps (SRGGB12) Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> --- MAINTAINERS | 1 + drivers/media/i2c/Kconfig | 10 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/imx283.c | 1596 ++++++++++++++++++++++++++++++++++++ 4 files changed, 1608 insertions(+) create mode 100644 drivers/media/i2c/imx283.c diff --git a/MAINTAINERS b/MAINTAINERS index 32f790c3a5f9..8169f0e41293 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20375,6 +20375,7 @@ L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml +F: drivers/media/i2c/imx283.c SONY IMX290 SENSOR DRIVER M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 4c3435921f19..2090b06b1827 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -153,6 +153,16 @@ config VIDEO_IMX274 This is a V4L2 sensor driver for the Sony IMX274 CMOS image sensor. +config VIDEO_IMX283 + tristate "Sony IMX283 sensor support" + select V4L2_CCI_I2C + help + This is a V4L2 sensor driver for the Sony IMX283 + CMOS image sensor. + + To compile this driver as a module, choose M here: the + module will be called imx283. + config VIDEO_IMX290 tristate "Sony IMX290 sensor support" select REGMAP_I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index dfbe6448b549..0fbd81f9f420 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_IMX214) += imx214.o obj-$(CONFIG_VIDEO_IMX219) += imx219.o obj-$(CONFIG_VIDEO_IMX258) += imx258.o obj-$(CONFIG_VIDEO_IMX274) += imx274.o +obj-$(CONFIG_VIDEO_IMX283) += imx283.o obj-$(CONFIG_VIDEO_IMX290) += imx290.o obj-$(CONFIG_VIDEO_IMX296) += imx296.o obj-$(CONFIG_VIDEO_IMX319) += imx319.o diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c new file mode 100644 index 000000000000..81fe2d4fd4d3 --- /dev/null +++ b/drivers/media/i2c/imx283.c @@ -0,0 +1,1596 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * V4L2 Support for the IMX283 + * + * Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color + * Cameras. + * + * Copyright (C) 2024 Ideas on Board Oy. + * + * Based on Sony IMX283 driver prepared by Will Whang + * + * Based on Sony imx477 camera driver + * Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd + */ + +#include <linux/array_size.h> +#include <linux/bitops.h> +#include <linux/container_of.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/types.h> +#include <linux/units.h> +#include <media/v4l2-cci.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-mediabus.h> + +/* Chip ID */ +#define IMX283_REG_CHIP_ID CCI_REG8(0x3000) +#define IMX283_CHIP_ID 0x0b // Default power on state + +#define IMX283_REG_STANDBY CCI_REG8(0x3000) +#define IMX283_ACTIVE 0 +#define IMX283_STANDBY BIT(0) +#define IMX283_STBLOGIC BIT(1) +#define IMX283_STBMIPI BIT(2) +#define IMX283_STBDV BIT(3) +#define IMX283_SLEEP BIT(4) + +#define IMX283_REG_CLAMP CCI_REG8(0x3001) +#define IMX283_CLPSQRST BIT(4) + +#define IMX283_REG_PLSTMG08 CCI_REG8(0x3003) +#define IMX283_PLSTMG08_VAL 0x77 + +#define IMX283_REG_MDSEL1 CCI_REG8(0x3004) +#define IMX283_REG_MDSEL2 CCI_REG8(0x3005) +#define IMX283_REG_MDSEL3 CCI_REG8(0x3006) +#define IMX283_MDSEL3_VCROP_EN BIT(5) +#define IMX283_REG_MDSEL4 CCI_REG8(0x3007) +#define IMX283_MDSEL4_VCROP_EN (BIT(4) | BIT(6)) + +#define IMX283_REG_SVR CCI_REG16_LE(0x3009) + +#define IMX283_REG_HTRIMMING CCI_REG8(0x300b) +#define IMX283_MDVREV BIT(0) /* VFLIP */ +#define IMX283_HTRIMMING_EN BIT(4) + +#define IMX283_REG_VWINPOS CCI_REG16_LE(0x300f) +#define IMX283_REG_VWIDCUT CCI_REG16_LE(0x3011) + +#define IMX283_REG_MDSEL7 CCI_REG16_LE(0x3013) + +/* CSI Clock Configuration */ +#define IMX283_REG_TCLKPOST CCI_REG8(0x3018) +#define IMX283_REG_THSPREPARE CCI_REG8(0x301a) +#define IMX283_REG_THSZERO CCI_REG8(0x301c) +#define IMX283_REG_THSTRAIL CCI_REG8(0x301e) +#define IMX283_REG_TCLKTRAIL CCI_REG8(0x3020) +#define IMX283_REG_TCLKPREPARE CCI_REG8(0x3022) +#define IMX283_REG_TCLKZERO CCI_REG16_LE(0x3024) +#define IMX283_REG_TLPX CCI_REG8(0x3026) +#define IMX283_REG_THSEXIT CCI_REG8(0x3028) +#define IMX283_REG_TCLKPRE CCI_REG8(0x302a) +#define IMX283_REG_SYSMODE CCI_REG8(0x3104) + +#define IMX283_REG_Y_OUT_SIZE CCI_REG16_LE(0x302f) +#define IMX283_REG_WRITE_VSIZE CCI_REG16_LE(0x3031) +#define IMX283_REG_OB_SIZE_V CCI_REG8(0x3033) + +/* HMAX internal HBLANK */ +#define IMX283_REG_HMAX CCI_REG16_LE(0x3036) +#define IMX283_HMAX_MAX (BIT(16) - 1) + +/* VMAX internal VBLANK */ +#define IMX283_REG_VMAX CCI_REG24_LE(0x3038) +#define IMX283_VMAX_MAX (BIT(16) - 1) + +/* SHR internal */ +#define IMX283_REG_SHR CCI_REG16_LE(0x303b) +#define IMX283_SHR_MIN 11 + +/* + * Analog gain control + * Gain [dB] = -20log{(2048 - value [10:0]) /2048} + * Range: 0dB to approximately +27dB + */ +#define IMX283_REG_ANALOG_GAIN CCI_REG16_LE(0x3042) +#define IMX283_ANA_GAIN_MIN 0 +#define IMX283_ANA_GAIN_MAX 1957 +#define IMX283_ANA_GAIN_STEP 1 +#define IMX283_ANA_GAIN_DEFAULT 0x0 + +/* + * Digital gain control + * Gain [dB] = value * 6 + * Range: 0dB to +18db + */ +#define IMX283_REG_DIGITAL_GAIN CCI_REG8(0x3044) +#define IMX283_DGTL_GAIN_MIN 0 +#define IMX283_DGTL_GAIN_MAX 3 +#define IMX283_DGTL_GAIN_DEFAULT 0 +#define IMX283_DGTL_GAIN_STEP 1 + +#define IMX283_REG_HTRIMMING_START CCI_REG16_LE(0x3058) +#define IMX283_REG_HTRIMMING_END CCI_REG16_LE(0x305a) + +#define IMX283_REG_MDSEL18 CCI_REG16_LE(0x30f6) + +/* Master Mode Operation Control */ +#define IMX283_REG_XMSTA CCI_REG8(0x3105) +#define IMX283_XMSTA BIT(0) + +#define IMX283_REG_SYNCDRV CCI_REG8(0x3107) +#define IMX283_SYNCDRV_XHS_XVS (0xa0 | 0x02) +#define IMX283_SYNCDRV_HIZ (0xa0 | 0x03) + +/* PLL Standby */ +#define IMX283_REG_STBPL CCI_REG8(0x320b) +#define IMX283_STBPL_NORMAL 0x00 +#define IMX283_STBPL_STANDBY 0x03 + +/* Input Frequency Setting */ +#define IMX283_REG_PLRD1 CCI_REG8(0x36c1) +#define IMX283_REG_PLRD2 CCI_REG16_LE(0x36c2) +#define IMX283_REG_PLRD3 CCI_REG8(0x36f7) +#define IMX283_REG_PLRD4 CCI_REG8(0x36f8) + +#define IMX283_REG_PLSTMG02 CCI_REG8(0x36aa) +#define IMX283_PLSTMG02_VAL 0x00 + +#define IMX283_REG_EBD_X_OUT_SIZE CCI_REG16_LE(0x3a54) + +/* Test pattern generator */ +#define IMX283_REG_TPG_CTRL CCI_REG8(0x3156) +#define IMX283_TPG_CTRL_CLKEN BIT(0) +#define IMX283_TPG_CTRL_PATEN BIT(4) + +#define IMX283_REG_TPG_PAT CCI_REG8(0x3157) +#define IMX283_TPG_PAT_ALL_000 0x00 +#define IMX283_TPG_PAT_ALL_FFF 0x01 +#define IMX283_TPG_PAT_ALL_555 0x02 +#define IMX283_TPG_PAT_ALL_AAA 0x03 +#define IMX283_TPG_PAT_H_COLOR_BARS 0x0a +#define IMX283_TPG_PAT_V_COLOR_BARS 0x0b + +/* Exposure control */ +#define IMX283_EXPOSURE_MIN 52 +#define IMX283_EXPOSURE_STEP 1 +#define IMX283_EXPOSURE_DEFAULT 1000 +#define IMX283_EXPOSURE_MAX 49865 + +#define IMAGE_PAD 0 + +#define IMX283_XCLR_MIN_DELAY_US (1 * USEC_PER_MSEC) +#define IMX283_XCLR_DELAY_RANGE_US (1 * USEC_PER_MSEC) + +/* IMX283 native and active pixel array size. */ +static const struct v4l2_rect imx283_native_area = { + .top = 0, + .left = 0, + .width = 5592, + .height = 3710, +}; + +static const struct v4l2_rect imx283_active_area = { + .top = 40, + .left = 108, + .width = 5472, + .height = 3648, +}; + +struct imx283_reg_list { + unsigned int num_of_regs; + const struct cci_reg_sequence *regs; +}; + +/* Mode : resolution and related config values */ +struct imx283_mode { + unsigned int mode; + + /* Bits per pixel */ + unsigned int bpp; + + /* Frame width */ + unsigned int width; + + /* Frame height */ + unsigned int height; + + /* + * Minimum horizontal timing in pixel-units + * + * Note that HMAX is written in 72MHz units, and the datasheet assumes a + * 720MHz link frequency. Convert datasheet values with the following: + * + * For 12 bpp modes (480Mbps) convert with: + * hmax = [hmax in 72MHz units] * 480 / 72 + * + * For 10 bpp modes (576Mbps) convert with: + * hmax = [hmax in 72MHz units] * 576 / 72 + */ + u32 min_hmax; + + /* minimum V-timing in lines */ + u32 min_vmax; + + /* default H-timing */ + u32 default_hmax; + + /* default V-timing */ + u32 default_vmax; + + /* minimum SHR */ + u32 min_shr; + + /* + * Per-mode vertical crop constants used to calculate values + * of IMX283REG_WIDCUT and IMX283_REG_VWINPOS. + */ + u32 veff; + u32 vst; + u32 vct; + + /* Horizontal and vertical binning ratio */ + u8 hbin_ratio; + u8 vbin_ratio; + + /* Optical Blanking */ + u32 horizontal_ob; + u32 vertical_ob; + + /* Analog crop rectangle. */ + struct v4l2_rect crop; +}; + +struct imx283_input_frequency { + unsigned int mhz; + unsigned int reg_count; + struct cci_reg_sequence regs[4]; +}; + +static const struct imx283_input_frequency imx283_frequencies[] = { + { + .mhz = 6 * HZ_PER_MHZ, + .reg_count = 4, + .regs = { + { IMX283_REG_PLRD1, 0x00 }, + { IMX283_REG_PLRD2, 0x00f0 }, + { IMX283_REG_PLRD3, 0x00 }, + { IMX283_REG_PLRD4, 0xc0 }, + }, + }, + { + .mhz = 12 * HZ_PER_MHZ, + .reg_count = 4, + .regs = { + { IMX283_REG_PLRD1, 0x01 }, + { IMX283_REG_PLRD2, 0x00f0 }, + { IMX283_REG_PLRD3, 0x01 }, + { IMX283_REG_PLRD4, 0xc0 }, + }, + }, + { + .mhz = 18 * HZ_PER_MHZ, + .reg_count = 4, + .regs = { + { IMX283_REG_PLRD1, 0x01 }, + { IMX283_REG_PLRD2, 0x00a0 }, + { IMX283_REG_PLRD3, 0x01 }, + { IMX283_REG_PLRD4, 0x80 }, + }, + }, + { + .mhz = 24 * HZ_PER_MHZ, + .reg_count = 4, + .regs = { + { IMX283_REG_PLRD1, 0x02 }, + { IMX283_REG_PLRD2, 0x00f0 }, + { IMX283_REG_PLRD3, 0x02 }, + { IMX283_REG_PLRD4, 0xc0 }, + }, + }, +}; + +enum imx283_modes { + IMX283_MODE_0, + IMX283_MODE_1, + IMX283_MODE_1A, + IMX283_MODE_1S, + IMX283_MODE_2, + IMX283_MODE_2A, + IMX283_MODE_3, + IMX283_MODE_4, + IMX283_MODE_5, + IMX283_MODE_6, +}; + +struct imx283_readout_mode { + u8 mdsel1; + u8 mdsel2; + u8 mdsel3; + u8 mdsel4; +}; + +static const struct imx283_readout_mode imx283_readout_modes[] = { + /* All pixel scan modes */ + [IMX283_MODE_0] = { 0x04, 0x03, 0x10, 0x00 }, /* 12 bit */ + [IMX283_MODE_1] = { 0x04, 0x01, 0x00, 0x00 }, /* 10 bit */ + [IMX283_MODE_1A] = { 0x04, 0x01, 0x20, 0x50 }, /* 10 bit */ + [IMX283_MODE_1S] = { 0x04, 0x41, 0x20, 0x50 }, /* 10 bit */ + + /* Horizontal / Vertical 2/2-line binning */ + [IMX283_MODE_2] = { 0x0d, 0x11, 0x50, 0x00 }, /* 12 bit */ + [IMX283_MODE_2A] = { 0x0d, 0x11, 0x70, 0x50 }, /* 12 bit */ + + /* Horizontal / Vertical 3/3-line binning */ + [IMX283_MODE_3] = { 0x1e, 0x18, 0x10, 0x00 }, /* 12 bit */ + + /* Vertical 2/9 subsampling, horizontal 3 binning cropping */ + [IMX283_MODE_4] = { 0x29, 0x18, 0x30, 0x50 }, /* 12 bit */ + + /* Vertical 2/19 subsampling binning, horizontal 3 binning */ + [IMX283_MODE_5] = { 0x2d, 0x18, 0x10, 0x00 }, /* 12 bit */ + + /* Vertical 2 binning horizontal 2/4, subsampling 16:9 cropping */ + [IMX283_MODE_6] = { 0x18, 0x21, 0x00, 0x09 }, /* 10 bit */ + + /* + * New modes should make sure the offset period is complied. + * See imx283_exposure() for reference. + */ +}; + +static const struct cci_reg_sequence mipi_data_rate_1440Mbps[] = { + /* The default register settings provide the 1440Mbps rate */ + { CCI_REG8(0x36c5), 0x00 }, /* Undocumented */ + { CCI_REG8(0x3ac4), 0x00 }, /* Undocumented */ + + { IMX283_REG_STBPL, 0x00 }, + { IMX283_REG_TCLKPOST, 0xa7 }, + { IMX283_REG_THSPREPARE, 0x6f }, + { IMX283_REG_THSZERO, 0x9f }, + { IMX283_REG_THSTRAIL, 0x5f }, + { IMX283_REG_TCLKTRAIL, 0x5f }, + { IMX283_REG_TCLKPREPARE, 0x6f }, + { IMX283_REG_TCLKZERO, 0x017f }, + { IMX283_REG_TLPX, 0x4f }, + { IMX283_REG_THSEXIT, 0x47 }, + { IMX283_REG_TCLKPRE, 0x07 }, + { IMX283_REG_SYSMODE, 0x02 }, +}; + +static const struct cci_reg_sequence mipi_data_rate_720Mbps[] = { + /* Undocumented Additions "For 720MBps" Setting */ + { CCI_REG8(0x36c5), 0x01 }, /* Undocumented */ + { CCI_REG8(0x3ac4), 0x01 }, /* Undocumented */ + + { IMX283_REG_STBPL, 0x00 }, + { IMX283_REG_TCLKPOST, 0x77 }, + { IMX283_REG_THSPREPARE, 0x37 }, + { IMX283_REG_THSZERO, 0x67 }, + { IMX283_REG_THSTRAIL, 0x37 }, + { IMX283_REG_TCLKTRAIL, 0x37 }, + { IMX283_REG_TCLKPREPARE, 0x37 }, + { IMX283_REG_TCLKZERO, 0xdf }, + { IMX283_REG_TLPX, 0x2f }, + { IMX283_REG_THSEXIT, 0x47 }, + { IMX283_REG_TCLKPRE, 0x0f }, + { IMX283_REG_SYSMODE, 0x02 }, +}; + +static const s64 link_frequencies[] = { + 720 * HZ_PER_MHZ, /* 1440 Mbps lane data rate */ + 360 * HZ_PER_MHZ, /* 720 Mbps data lane rate */ +}; + +static const struct imx283_reg_list link_freq_reglist[] = { + { /* 720 MHz */ + .num_of_regs = ARRAY_SIZE(mipi_data_rate_1440Mbps), + .regs = mipi_data_rate_1440Mbps, + }, + { /* 360 MHz */ + .num_of_regs = ARRAY_SIZE(mipi_data_rate_720Mbps), + .regs = mipi_data_rate_720Mbps, + }, +}; + +#define CENTERED_RECTANGLE(rect, _width, _height) \ + { \ + .left = rect.left + ((rect.width - (_width)) / 2), \ + .top = rect.top + ((rect.height - (_height)) / 2), \ + .width = (_width), \ + .height = (_height), \ + } + +/* Mode configs */ +static const struct imx283_mode supported_modes_12bit[] = { + { + /* 20MPix 21.40 fps readout mode 0 */ + .mode = IMX283_MODE_0, + .bpp = 12, + .width = 5472, + .height = 3648, + .min_hmax = 5914, /* 887 @ 480MHz/72MHz */ + .min_vmax = 3793, /* Lines */ + + .veff = 3694, + .vst = 0, + .vct = 0, + + .hbin_ratio = 1, + .vbin_ratio = 1, + + /* 20.00 FPS */ + .default_hmax = 6000, /* 900 @ 480MHz/72MHz */ + .default_vmax = 4000, + + .min_shr = 11, + .horizontal_ob = 96, + .vertical_ob = 16, + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), + }, + { + /* + * Readout mode 2 : 2/2 binned mode (2736x1824) + */ + .mode = IMX283_MODE_2, + .bpp = 12, + .width = 2736, + .height = 1824, + .min_hmax = 1870, /* Pixels (362 * 360/72 + padding) */ + .min_vmax = 3840, /* Lines */ + + /* 50.00 FPS */ + .default_hmax = 1870, /* 362 @ 360MHz/72MHz */ + .default_vmax = 3960, + + .veff = 1824, + .vst = 0, + .vct = 0, + + .hbin_ratio = 2, + .vbin_ratio = 2, + + .min_shr = 12, + .horizontal_ob = 48, + .vertical_ob = 4, + + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), + }, +}; + +static const struct imx283_mode supported_modes_10bit[] = { + { + /* 20MPix 25.48 fps readout mode 1 */ + .mode = IMX283_MODE_1, + .bpp = 10, + .width = 5472, + .height = 3648, + .min_hmax = 5960, /* 745 @ 576MHz / 72MHz */ + .min_vmax = 3793, + + /* 25.00 FPS */ + .default_hmax = 1500, /* 750 @ 576MHz / 72MHz */ + .default_vmax = 3840, + + .min_shr = 10, + .horizontal_ob = 96, + .vertical_ob = 16, + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), + }, +}; + +static const u32 imx283_mbus_codes[] = { + MEDIA_BUS_FMT_SRGGB12_1X12, + MEDIA_BUS_FMT_SRGGB10_1X10, +}; + +/* regulator supplies */ +static const char *const imx283_supply_name[] = { + "vadd", /* Analog (2.9V) supply */ + "vdd1", /* Supply Voltage 2 (1.8V) supply */ + "vdd2", /* Supply Voltage 3 (1.2V) supply */ +}; + +struct imx283 { + struct device *dev; + struct regmap *cci; + + const struct imx283_input_frequency *freq; + + struct v4l2_subdev sd; + struct media_pad pad; + + struct clk *xclk; + + struct gpio_desc *reset_gpio; + struct regulator_bulk_data supplies[ARRAY_SIZE(imx283_supply_name)]; + + /* V4L2 Controls */ + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vflip; + + unsigned long link_freq_bitmap; + + u16 hmax; + u32 vmax; +}; + +static inline struct imx283 *to_imx283(struct v4l2_subdev *sd) +{ + return container_of_const(sd, struct imx283, sd); +} + +static inline void get_mode_table(unsigned int code, + const struct imx283_mode **mode_list, + unsigned int *num_modes) +{ + switch (code) { + case MEDIA_BUS_FMT_SRGGB12_1X12: + case MEDIA_BUS_FMT_SGRBG12_1X12: + case MEDIA_BUS_FMT_SGBRG12_1X12: + case MEDIA_BUS_FMT_SBGGR12_1X12: + *mode_list = supported_modes_12bit; + *num_modes = ARRAY_SIZE(supported_modes_12bit); + break; + + case MEDIA_BUS_FMT_SRGGB10_1X10: + case MEDIA_BUS_FMT_SGRBG10_1X10: + case MEDIA_BUS_FMT_SGBRG10_1X10: + case MEDIA_BUS_FMT_SBGGR10_1X10: + *mode_list = supported_modes_10bit; + *num_modes = ARRAY_SIZE(supported_modes_10bit); + break; + default: + *mode_list = NULL; + *num_modes = 0; + break; + } +} + +/* Calculate the Pixel Rate based on the current mode */ +static u64 imx283_pixel_rate(struct imx283 *imx283, + const struct imx283_mode *mode) +{ + unsigned int bpp = mode->bpp; + const unsigned int ddr = 2; /* Double Data Rate */ + const unsigned int lanes = 4; /* Only 4 lane support */ + u64 link_frequency = link_frequencies[__ffs(imx283->link_freq_bitmap)]; + + return link_frequency * ddr * lanes / bpp; +} + +/* Convert from a variable pixel_rate to 72 MHz clock cycles */ +static u64 imx283_internal_clock(unsigned int pixel_rate, unsigned int pixels) +{ + /* + * Determine the following operation without overflow: + * pixels = 72 Mhz / pixel_rate + * + * The internal clock at 72MHz and Pixel Rate (between 240 and 576MHz) + * can easily overflow this calculation, so pre-divide to simplify. + */ + const u32 iclk_pre = 72; + const u32 pclk_pre = pixel_rate / HZ_PER_MHZ; + + return pixels * iclk_pre / pclk_pre; +} + +/* Internal clock (72MHz) to Pixel Rate clock (Variable) */ +static u64 imx283_iclk_to_pix(unsigned int pixel_rate, unsigned int cycles) +{ + /* + * Determine the following operation without overflow: + * cycles * pixel_rate / 72 MHz + * + * The internal clock at 72MHz and Pixel Rate (between 240 and 576MHz) + * can easily overflow this calculation, so pre-divide to simplify. + */ + const u32 iclk_pre = 72; + const u32 pclk_pre = pixel_rate / HZ_PER_MHZ; + + return cycles * pclk_pre / iclk_pre; +} + +/* Determine the exposure based on current hmax, vmax and a given SHR */ +static u32 imx283_exposure(struct imx283 *imx283, + const struct imx283_mode *mode, u64 shr) +{ + u32 svr = 0; /* SVR feature is not currently supported */ + u32 offset; + u64 numerator; + + /* Number of clocks per internal offset period */ + offset = mode->mode == IMX283_MODE_0 ? 209 : 157; + numerator = (imx283->vmax * (svr + 1) - shr) * imx283->hmax + offset; + + do_div(numerator, imx283->hmax); + + return clamp(numerator, 0, U32_MAX); +} + +static void imx283_exposure_limits(struct imx283 *imx283, + const struct imx283_mode *mode, + s64 *min_exposure, s64 *max_exposure) +{ + u32 svr = 0; /* SVR feature is not currently supported */ + u64 min_shr = mode->min_shr; + /* Global Shutter is not supported */ + u64 max_shr = (svr + 1) * imx283->vmax - 4; + + max_shr = min(max_shr, BIT(16) - 1); + + *min_exposure = imx283_exposure(imx283, mode, max_shr); + *max_exposure = imx283_exposure(imx283, mode, min_shr); +} + +/* + * Integration Time [s] = [ {VMAX x (SVR + 1) – (SHR)} x HMAX + offset ] + * / [ 72 x 10^6 ] + */ +static u32 imx283_shr(struct imx283 *imx283, const struct imx283_mode *mode, + u32 exposure) +{ + u32 svr = 0; /* SVR feature is not currently supported */ + u32 offset; + u64 temp; + + /* Number of clocks per internal offset period */ + offset = mode->mode == IMX283_MODE_0 ? 209 : 157; + temp = ((u64)exposure * imx283->hmax - offset); + do_div(temp, imx283->hmax); + + return (imx283->vmax * (svr + 1) - temp); +} + +static const char * const imx283_tpg_menu[] = { + "Disabled", + "All 000h", + "All FFFh", + "All 555h", + "All AAAh", + "Horizontal color bars", + "Vertical color bars", +}; + +static const int imx283_tpg_val[] = { + IMX283_TPG_PAT_ALL_000, + IMX283_TPG_PAT_ALL_000, + IMX283_TPG_PAT_ALL_FFF, + IMX283_TPG_PAT_ALL_555, + IMX283_TPG_PAT_ALL_AAA, + IMX283_TPG_PAT_H_COLOR_BARS, + IMX283_TPG_PAT_V_COLOR_BARS, +}; + +static int imx283_update_test_pattern(struct imx283 *imx283, u32 pattern_index) +{ + int ret; + + if (pattern_index >= ARRAY_SIZE(imx283_tpg_val)) + return -EINVAL; + + if (!pattern_index) + return cci_write(imx283->cci, IMX283_REG_TPG_CTRL, 0x00, NULL); + + ret = cci_write(imx283->cci, IMX283_REG_TPG_PAT, + imx283_tpg_val[pattern_index], NULL); + if (ret) + return ret; + + return cci_write(imx283->cci, IMX283_REG_TPG_CTRL, + IMX283_TPG_CTRL_CLKEN | IMX283_TPG_CTRL_PATEN, NULL); +} + +static int imx283_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct imx283 *imx283 = container_of(ctrl->handler, struct imx283, + ctrl_handler); + const struct imx283_mode *mode; + struct v4l2_mbus_framefmt *fmt; + const struct imx283_mode *mode_list; + struct v4l2_subdev_state *state; + unsigned int num_modes; + u64 shr, pixel_rate; + int ret = 0; + + state = v4l2_subdev_get_locked_active_state(&imx283->sd); + fmt = v4l2_subdev_state_get_format(state, 0); + + get_mode_table(fmt->code, &mode_list, &num_modes); + mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, + fmt->width, fmt->height); + + /* + * The VBLANK control may change the limits of usable exposure, so check + * and adjust if necessary. + */ + if (ctrl->id == V4L2_CID_VBLANK) { + /* Honour the VBLANK limits when setting exposure. */ + s64 current_exposure, max_exposure, min_exposure; + + imx283->vmax = mode->height + ctrl->val; + + imx283_exposure_limits(imx283, mode, + &min_exposure, &max_exposure); + + current_exposure = imx283->exposure->val; + current_exposure = clamp(current_exposure, min_exposure, + max_exposure); + + __v4l2_ctrl_modify_range(imx283->exposure, min_exposure, + max_exposure, 1, current_exposure); + } + + /* + * Applying V4L2 control value only happens + * when power is up for streaming + */ + if (!pm_runtime_get_if_active(imx283->dev, true)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + shr = imx283_shr(imx283, mode, ctrl->val); + dev_dbg(imx283->dev, "V4L2_CID_EXPOSURE : %d - SHR: %lld\n", + ctrl->val, shr); + ret = cci_write(imx283->cci, IMX283_REG_SHR, shr, NULL); + break; + + case V4L2_CID_HBLANK: + pixel_rate = imx283_pixel_rate(imx283, mode); + imx283->hmax = imx283_internal_clock(pixel_rate, mode->width + ctrl->val); + dev_dbg(imx283->dev, "V4L2_CID_HBLANK : %d HMAX : %u\n", + ctrl->val, imx283->hmax); + ret = cci_write(imx283->cci, IMX283_REG_HMAX, imx283->hmax, NULL); + break; + + case V4L2_CID_VBLANK: + imx283->vmax = mode->height + ctrl->val; + dev_dbg(imx283->dev, "V4L2_CID_VBLANK : %d VMAX : %u\n", + ctrl->val, imx283->vmax); + ret = cci_write(imx283->cci, IMX283_REG_VMAX, imx283->vmax, NULL); + break; + + case V4L2_CID_ANALOGUE_GAIN: + ret = cci_write(imx283->cci, IMX283_REG_ANALOG_GAIN, ctrl->val, NULL); + break; + + case V4L2_CID_DIGITAL_GAIN: + ret = cci_write(imx283->cci, IMX283_REG_DIGITAL_GAIN, ctrl->val, NULL); + break; + + case V4L2_CID_VFLIP: + /* + * VFLIP is managed by BIT(0) of IMX283_REG_HTRIMMING address, hence + * both need to be set simultaneously. + */ + if (ctrl->val) { + cci_write(imx283->cci, IMX283_REG_HTRIMMING, + IMX283_HTRIMMING_EN | IMX283_MDVREV, &ret); + } else { + cci_write(imx283->cci, IMX283_REG_HTRIMMING, + IMX283_HTRIMMING_EN, &ret); + } + break; + + case V4L2_CID_TEST_PATTERN: + ret = imx283_update_test_pattern(imx283, ctrl->val); + break; + + default: + dev_err(imx283->dev, "ctrl(id:0x%x, val:0x%x) is not handled\n", + ctrl->id, ctrl->val); + break; + } + + pm_runtime_put(imx283->dev); + + return ret; +} + +static const struct v4l2_ctrl_ops imx283_ctrl_ops = { + .s_ctrl = imx283_set_ctrl, +}; + +static int imx283_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(imx283_mbus_codes)) + return -EINVAL; + + code->code = imx283_mbus_codes[code->index]; + + return 0; +} + +static int imx283_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + const struct imx283_mode *mode_list; + unsigned int num_modes; + + get_mode_table(fse->code, &mode_list, &num_modes); + + if (fse->index >= num_modes) + return -EINVAL; + + fse->min_width = mode_list[fse->index].width; + fse->max_width = fse->min_width; + fse->min_height = mode_list[fse->index].height; + fse->max_height = fse->min_height; + + return 0; +} + +static void imx283_update_image_pad_format(struct imx283 *imx283, + const struct imx283_mode *mode, + struct v4l2_mbus_framefmt *format) +{ + format->width = mode->width; + format->height = mode->height; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_RAW; + format->ycbcr_enc = V4L2_YCBCR_ENC_601; + format->quantization = V4L2_QUANTIZATION_FULL_RANGE; + format->xfer_func = V4L2_XFER_FUNC_NONE; +} + +static int imx283_init_state(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct imx283 *imx283 = to_imx283(sd); + struct v4l2_mbus_framefmt *format; + const struct imx283_mode *mode; + struct v4l2_rect *crop; + + /* Initialize try_fmt */ + format = v4l2_subdev_state_get_format(state, IMAGE_PAD); + + mode = &supported_modes_12bit[0]; + format->code = MEDIA_BUS_FMT_SRGGB12_1X12; + imx283_update_image_pad_format(imx283, mode, format); + + /* Initialize crop rectangle to mode default */ + crop = v4l2_subdev_state_get_crop(state, IMAGE_PAD); + *crop = mode->crop; + + return 0; +} + +static void imx283_set_framing_limits(struct imx283 *imx283, + const struct imx283_mode *mode) +{ + u64 pixel_rate = imx283_pixel_rate(imx283, mode); + u64 min_hblank, max_hblank, def_hblank; + + /* Initialise hmax and vmax for exposure calculations */ + imx283->hmax = imx283_internal_clock(pixel_rate, mode->default_hmax); + imx283->vmax = mode->default_vmax; + + /* + * Horizontal Blanking + * Convert the HMAX_MAX (72MHz) to Pixel rate values for HBLANK_MAX + */ + min_hblank = mode->min_hmax - mode->width; + max_hblank = imx283_iclk_to_pix(pixel_rate, IMX283_HMAX_MAX) - mode->width; + def_hblank = mode->default_hmax - mode->width; + __v4l2_ctrl_modify_range(imx283->hblank, min_hblank, max_hblank, 1, + def_hblank); + __v4l2_ctrl_s_ctrl(imx283->hblank, def_hblank); + + /* Vertical Blanking */ + __v4l2_ctrl_modify_range(imx283->vblank, mode->min_vmax - mode->height, + IMX283_VMAX_MAX - mode->height, 1, + mode->default_vmax - mode->height); + __v4l2_ctrl_s_ctrl(imx283->vblank, mode->default_vmax - mode->height); +} + +static int imx283_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct v4l2_mbus_framefmt *format; + const struct imx283_mode *mode; + struct imx283 *imx283 = to_imx283(sd); + const struct imx283_mode *mode_list; + unsigned int num_modes; + + get_mode_table(fmt->format.code, &mode_list, &num_modes); + + mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, + fmt->format.width, fmt->format.height); + + fmt->format.width = mode->width; + fmt->format.height = mode->height; + fmt->format.field = V4L2_FIELD_NONE; + fmt->format.colorspace = V4L2_COLORSPACE_RAW; + fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_601; + fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE; + fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; + + format = v4l2_subdev_state_get_format(sd_state, 0); + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + imx283_set_framing_limits(imx283, mode); + + *format = fmt->format; + + return 0; +} + +static int imx283_standby_cancel(struct imx283 *imx283) +{ + unsigned int link_freq_idx; + int ret = 0; + + cci_write(imx283->cci, IMX283_REG_STANDBY, + IMX283_STBLOGIC | IMX283_STBDV, &ret); + + /* Configure PLL clocks based on the xclk */ + cci_multi_reg_write(imx283->cci, imx283->freq->regs, + imx283->freq->reg_count, &ret); + + dev_dbg(imx283->dev, "Using clk freq %ld MHz", + imx283->freq->mhz / HZ_PER_MHZ); + + /* Initialise communication */ + cci_write(imx283->cci, IMX283_REG_PLSTMG08, IMX283_PLSTMG08_VAL, &ret); + cci_write(imx283->cci, IMX283_REG_PLSTMG02, IMX283_PLSTMG02_VAL, &ret); + + /* Enable PLL */ + cci_write(imx283->cci, IMX283_REG_STBPL, IMX283_STBPL_NORMAL, &ret); + + /* Configure the MIPI link speed */ + link_freq_idx = __ffs(imx283->link_freq_bitmap); + cci_multi_reg_write(imx283->cci, link_freq_reglist[link_freq_idx].regs, + link_freq_reglist[link_freq_idx].num_of_regs, + &ret); + + /* 1st Stabilisation period of 1 ms or more */ + usleep_range(1000, 2000); + + /* Activate */ + cci_write(imx283->cci, IMX283_REG_STANDBY, IMX283_ACTIVE, &ret); + + /* 2nd Stabilisation period of 19ms or more */ + usleep_range(19000, 20000); + + cci_write(imx283->cci, IMX283_REG_CLAMP, IMX283_CLPSQRST, &ret); + cci_write(imx283->cci, IMX283_REG_XMSTA, 0, &ret); + cci_write(imx283->cci, IMX283_REG_SYNCDRV, IMX283_SYNCDRV_XHS_XVS, &ret); + + return ret; +} + +/* Start streaming */ +static int imx283_start_streaming(struct imx283 *imx283, + struct v4l2_subdev_state *state) +{ + const struct imx283_readout_mode *readout; + const struct imx283_mode *mode; + const struct v4l2_mbus_framefmt *fmt; + const struct imx283_mode *mode_list; + unsigned int num_modes; + u32 v_widcut; + s32 v_pos; + u32 write_v_size; + u32 y_out_size; + int ret = 0; + + fmt = v4l2_subdev_state_get_format(state, 0); + get_mode_table(fmt->code, &mode_list, &num_modes); + mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, + fmt->width, fmt->height); + + ret = imx283_standby_cancel(imx283); + if (ret) { + dev_err(imx283->dev, "failed to cancel standby\n"); + return ret; + } + + /* + * Set the readout mode registers. + * MDSEL3 and MDSEL4 are updated to enable Arbitrary Vertical Cropping. + */ + readout = &imx283_readout_modes[mode->mode]; + cci_write(imx283->cci, IMX283_REG_MDSEL1, readout->mdsel1, &ret); + cci_write(imx283->cci, IMX283_REG_MDSEL2, readout->mdsel2, &ret); + cci_write(imx283->cci, IMX283_REG_MDSEL3, + readout->mdsel3 | IMX283_MDSEL3_VCROP_EN, &ret); + cci_write(imx283->cci, IMX283_REG_MDSEL4, + readout->mdsel4 | IMX283_MDSEL4_VCROP_EN, &ret); + + /* Mode 1S specific entries from the Readout Drive Mode Tables */ + if (mode->mode == IMX283_MODE_1S) { + cci_write(imx283->cci, IMX283_REG_MDSEL7, 0x01, &ret); + cci_write(imx283->cci, IMX283_REG_MDSEL18, 0x1098, &ret); + } + + if (ret) { + dev_err(imx283->dev, "failed to set readout\n"); + return ret; + } + + /* Initialise SVR. Unsupported for now - Always 0 */ + cci_write(imx283->cci, IMX283_REG_SVR, 0x00, &ret); + + dev_dbg(imx283->dev, "Mode: Size %d x %d\n", mode->width, mode->height); + dev_dbg(imx283->dev, "Analogue Crop (in the mode) %d,%d %dx%d\n", + mode->crop.left, + mode->crop.top, + mode->crop.width, + mode->crop.height); + + y_out_size = mode->crop.height / mode->vbin_ratio; + write_v_size = y_out_size + mode->vertical_ob; + /* + * cropping start position = (VWINPOS – Vst) × 2 + * cropping width = Veff – (VWIDCUT – Vct) × 2 + */ + v_pos = imx283->vflip->val ? + ((-mode->crop.top / mode->vbin_ratio) / 2) + mode->vst : + ((mode->crop.top / mode->vbin_ratio) / 2) + mode->vst; + v_widcut = ((mode->veff - y_out_size) / 2) + mode->vct; + + cci_write(imx283->cci, IMX283_REG_Y_OUT_SIZE, y_out_size, &ret); + cci_write(imx283->cci, IMX283_REG_WRITE_VSIZE, write_v_size, &ret); + cci_write(imx283->cci, IMX283_REG_VWIDCUT, v_widcut, &ret); + cci_write(imx283->cci, IMX283_REG_VWINPOS, v_pos, &ret); + + cci_write(imx283->cci, IMX283_REG_OB_SIZE_V, mode->vertical_ob, &ret); + + /* TODO: Validate mode->crop is fully contained within imx283_native_area */ + cci_write(imx283->cci, IMX283_REG_HTRIMMING_START, mode->crop.left, &ret); + cci_write(imx283->cci, IMX283_REG_HTRIMMING_END, + mode->crop.left + mode->crop.width, &ret); + + /* Disable embedded data */ + cci_write(imx283->cci, IMX283_REG_EBD_X_OUT_SIZE, 0, &ret); + + /* Apply customized values from controls (HMAX/VMAX/SHR) */ + ret = __v4l2_ctrl_handler_setup(imx283->sd.ctrl_handler); + + return ret; +} + +static int imx283_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct imx283 *imx283 = to_imx283(sd); + int ret; + + if (pad != IMAGE_PAD) + return -EINVAL; + + ret = pm_runtime_get_sync(imx283->dev); + if (ret < 0) { + pm_runtime_put_noidle(imx283->dev); + return ret; + } + + ret = imx283_start_streaming(imx283, state); + if (ret) + goto err_rpm_put; + + return 0; + +err_rpm_put: + pm_runtime_mark_last_busy(imx283->dev); + pm_runtime_put_autosuspend(imx283->dev); + + return ret; +} + +static int imx283_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct imx283 *imx283 = to_imx283(sd); + int ret; + + if (pad != IMAGE_PAD) + return -EINVAL; + + ret = cci_write(imx283->cci, IMX283_REG_STANDBY, IMX283_STBLOGIC, NULL); + if (ret) + dev_err(imx283->dev, "Failed to stop stream\n"); + + pm_runtime_mark_last_busy(imx283->dev); + pm_runtime_put_autosuspend(imx283->dev); + + return ret; +} + +/* Power/clock management functions */ +static int imx283_power_on(struct imx283 *imx283) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(imx283_supply_name), + imx283->supplies); + if (ret) { + dev_err(imx283->dev, "failed to enable regulators\n"); + return ret; + } + + ret = clk_prepare_enable(imx283->xclk); + if (ret) { + dev_err(imx283->dev, "failed to enable clock\n"); + goto reg_off; + } + + gpiod_set_value_cansleep(imx283->reset_gpio, 0); + + usleep_range(IMX283_XCLR_MIN_DELAY_US, + IMX283_XCLR_MIN_DELAY_US + IMX283_XCLR_DELAY_RANGE_US); + + return 0; + +reg_off: + regulator_bulk_disable(ARRAY_SIZE(imx283_supply_name), imx283->supplies); + return ret; +} + +static int imx283_power_off(struct imx283 *imx283) +{ + gpiod_set_value_cansleep(imx283->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(imx283_supply_name), imx283->supplies); + clk_disable_unprepare(imx283->xclk); + + return 0; +} + +static int imx283_runtime_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct imx283 *imx283 = to_imx283(sd); + + return imx283_power_on(imx283); +} + +static int imx283_runtime_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct imx283 *imx283 = to_imx283(sd); + + imx283_power_off(imx283); + + return 0; +} + +static int imx283_get_regulators(struct imx283 *imx283) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(imx283_supply_name); i++) + imx283->supplies[i].supply = imx283_supply_name[i]; + + return devm_regulator_bulk_get(imx283->dev, + ARRAY_SIZE(imx283_supply_name), + imx283->supplies); +} + +/* Verify chip ID */ +static int imx283_identify_module(struct imx283 *imx283) +{ + int ret; + u64 val; + + ret = cci_read(imx283->cci, IMX283_REG_CHIP_ID, &val, NULL); + if (ret) { + dev_err(imx283->dev, "failed to read chip id %x, with error %d\n", + IMX283_CHIP_ID, ret); + return ret; + } + + if (val != IMX283_CHIP_ID) { + dev_err(imx283->dev, "chip id mismatch: %x!=%llx\n", + IMX283_CHIP_ID, val); + return -EIO; + } + + return 0; +} + +static int imx283_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + switch (sel->target) { + case V4L2_SEL_TGT_CROP: { + sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); + return 0; + } + + case V4L2_SEL_TGT_NATIVE_SIZE: + sel->r = imx283_native_area; + return 0; + + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r = imx283_active_area; + return 0; + default: + return -EINVAL; + } +} + +static const struct v4l2_subdev_core_ops imx283_core_ops = { + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops imx283_video_ops = { + .s_stream = v4l2_subdev_s_stream_helper, +}; + +static const struct v4l2_subdev_pad_ops imx283_pad_ops = { + .enum_mbus_code = imx283_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = imx283_set_pad_format, + .get_selection = imx283_get_selection, + .enum_frame_size = imx283_enum_frame_size, + .enable_streams = imx283_enable_streams, + .disable_streams = imx283_disable_streams, +}; + +static const struct v4l2_subdev_internal_ops imx283_internal_ops = { + .init_state = imx283_init_state, +}; + +static const struct v4l2_subdev_ops imx283_subdev_ops = { + .core = &imx283_core_ops, + .video = &imx283_video_ops, + .pad = &imx283_pad_ops, +}; + +/* Initialize control handlers */ +static int imx283_init_controls(struct imx283 *imx283) +{ + struct v4l2_ctrl_handler *ctrl_hdlr; + struct v4l2_fwnode_device_properties props; + struct v4l2_ctrl *link_freq; + const struct imx283_mode *mode = &supported_modes_12bit[0]; + u64 min_hblank, max_hblank, def_hblank; + u64 pixel_rate; + int ret; + + ctrl_hdlr = &imx283->ctrl_handler; + ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16); + if (ret) + return ret; + + /* + * Create the controls here, but mode specific limits are setup + * in the imx283_set_framing_limits() call below. + */ + + /* By default, PIXEL_RATE is read only */ + pixel_rate = imx283_pixel_rate(imx283, mode); + v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_PIXEL_RATE, pixel_rate, + pixel_rate, 1, pixel_rate); + + link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_LINK_FREQ, + __fls(imx283->link_freq_bitmap), + __ffs(imx283->link_freq_bitmap), + link_frequencies); + if (link_freq) + link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + /* Initialise vblank/hblank/exposure based on the current mode. */ + imx283->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_VBLANK, + mode->min_vmax - mode->height, + IMX283_VMAX_MAX, 1, + mode->default_vmax - mode->height); + + min_hblank = mode->min_hmax - mode->width; + max_hblank = imx283_iclk_to_pix(pixel_rate, IMX283_HMAX_MAX) - mode->width; + def_hblank = mode->default_hmax - mode->width; + imx283->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_HBLANK, min_hblank, max_hblank, + 1, def_hblank); + + imx283->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_EXPOSURE, + IMX283_EXPOSURE_MIN, + IMX283_EXPOSURE_MAX, + IMX283_EXPOSURE_STEP, + IMX283_EXPOSURE_DEFAULT); + + v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, + IMX283_ANA_GAIN_MIN, IMX283_ANA_GAIN_MAX, + IMX283_ANA_GAIN_STEP, IMX283_ANA_GAIN_DEFAULT); + + v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_DIGITAL_GAIN, + IMX283_DGTL_GAIN_MIN, IMX283_DGTL_GAIN_MAX, + IMX283_DGTL_GAIN_STEP, IMX283_DGTL_GAIN_DEFAULT); + + imx283->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_VFLIP, + 0, 1, 1, 0); + if (imx283->vflip) + imx283->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT; + + v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx283_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(imx283_tpg_menu) - 1, + 0, 0, imx283_tpg_menu); + + if (ctrl_hdlr->error) { + ret = ctrl_hdlr->error; + dev_err(imx283->dev, "control init failed (%d)\n", ret); + goto error; + } + + ret = v4l2_fwnode_device_parse(imx283->dev, &props); + if (ret) + goto error; + + ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx283_ctrl_ops, + &props); + if (ret) + goto error; + + imx283->sd.ctrl_handler = ctrl_hdlr; + + mutex_lock(imx283->ctrl_handler.lock); + + /* Setup exposure and frame/line length limits. */ + imx283_set_framing_limits(imx283, mode); + + mutex_unlock(imx283->ctrl_handler.lock); + + return 0; + +error: + v4l2_ctrl_handler_free(ctrl_hdlr); + + return ret; +} + +static int imx283_parse_endpoint(struct imx283 *imx283) +{ + struct fwnode_handle *fwnode; + struct v4l2_fwnode_endpoint bus_cfg = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + struct fwnode_handle *ep; + int ret; + + fwnode = dev_fwnode(imx283->dev); + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (!ep) { + dev_err(imx283->dev, "Failed to get next endpoint\n"); + return -ENXIO; + } + + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); + fwnode_handle_put(ep); + if (ret) + return ret; + + if (bus_cfg.bus.mipi_csi2.num_data_lanes != 4) { + dev_err(imx283->dev, + "number of CSI2 data lanes %d is not supported\n", + bus_cfg.bus.mipi_csi2.num_data_lanes); + ret = -EINVAL; + goto done_endpoint_free; + } + + ret = v4l2_link_freq_to_bitmap(imx283->dev, bus_cfg.link_frequencies, + bus_cfg.nr_of_link_frequencies, + link_frequencies, ARRAY_SIZE(link_frequencies), + &imx283->link_freq_bitmap); + +done_endpoint_free: + v4l2_fwnode_endpoint_free(&bus_cfg); + + return ret; +}; + +static int imx283_probe(struct i2c_client *client) +{ + struct imx283 *imx283; + unsigned int i; + unsigned int xclk_freq; + int ret; + + imx283 = devm_kzalloc(&client->dev, sizeof(*imx283), GFP_KERNEL); + if (!imx283) + return -ENOMEM; + + imx283->dev = &client->dev; + + v4l2_i2c_subdev_init(&imx283->sd, client, &imx283_subdev_ops); + + imx283->cci = devm_cci_regmap_init_i2c(client, 16); + if (IS_ERR(imx283->cci)) { + ret = PTR_ERR(imx283->cci); + dev_err(imx283->dev, "failed to initialize CCI: %d\n", ret); + return ret; + } + + /* Get system clock (xclk) */ + imx283->xclk = devm_clk_get(imx283->dev, NULL); + if (IS_ERR(imx283->xclk)) { + return dev_err_probe(imx283->dev, PTR_ERR(imx283->xclk), + "failed to get xclk\n"); + } + + xclk_freq = clk_get_rate(imx283->xclk); + for (i = 0; i < ARRAY_SIZE(imx283_frequencies); i++) { + if (xclk_freq == imx283_frequencies[i].mhz) { + imx283->freq = &imx283_frequencies[i]; + break; + } + } + if (!imx283->freq) { + dev_err(imx283->dev, "xclk frequency unsupported: %d Hz\n", xclk_freq); + return -EINVAL; + } + + ret = imx283_get_regulators(imx283); + if (ret) { + return dev_err_probe(imx283->dev, ret, + "failed to get regulators\n"); + } + + ret = imx283_parse_endpoint(imx283); + if (ret) { + dev_err(imx283->dev, "failed to parse endpoint configuration\n"); + return ret; + } + + /* Request optional enable pin */ + imx283->reset_gpio = devm_gpiod_get_optional(imx283->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(imx283->reset_gpio)) + return dev_err_probe(imx283->dev, PTR_ERR(imx283->reset_gpio), + "failed to get reset GPIO\n"); + + /* + * The sensor must be powered for imx283_identify_module() + * to be able to read the CHIP_ID register + */ + ret = imx283_power_on(imx283); + if (ret) + return ret; + + ret = imx283_identify_module(imx283); + if (ret) + goto error_power_off; + + /* + * Enable runtime PM with autosuspend. As the device has been powered + * manually, mark it as active, and increase the usage count without + * resuming the device. + */ + pm_runtime_set_active(imx283->dev); + pm_runtime_get_noresume(imx283->dev); + pm_runtime_enable(imx283->dev); + pm_runtime_set_autosuspend_delay(imx283->dev, 1000); + pm_runtime_use_autosuspend(imx283->dev); + + /* This needs the pm runtime to be registered. */ + ret = imx283_init_controls(imx283); + if (ret) + goto error_pm; + + /* Initialize subdev */ + imx283->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + imx283->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + imx283->sd.internal_ops = &imx283_internal_ops; + + /* Initialize source pads */ + imx283->pad.flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&imx283->sd.entity, 1, &imx283->pad); + if (ret) { + dev_err(imx283->dev, "failed to init entity pads: %d\n", ret); + goto error_handler_free; + } + + imx283->sd.state_lock = imx283->ctrl_handler.lock; + ret = v4l2_subdev_init_finalize(&imx283->sd); + if (ret < 0) { + dev_err(imx283->dev, "subdev init error: %d\n", ret); + goto error_media_entity; + } + + ret = v4l2_async_register_subdev_sensor(&imx283->sd); + if (ret < 0) { + dev_err(imx283->dev, "failed to register sensor sub-device: %d\n", ret); + goto error_subdev_cleanup; + } + + /* + * Decrease the PM usage count. The device will get suspended after the + * autosuspend delay, turning the power off. + */ + pm_runtime_mark_last_busy(imx283->dev); + pm_runtime_put_autosuspend(imx283->dev); + + return 0; + +error_subdev_cleanup: + v4l2_subdev_cleanup(&imx283->sd); + +error_media_entity: + media_entity_cleanup(&imx283->sd.entity); + +error_handler_free: + v4l2_ctrl_handler_free(imx283->sd.ctrl_handler); + +error_pm: + pm_runtime_disable(imx283->dev); + pm_runtime_set_suspended(imx283->dev); +error_power_off: + imx283_power_off(imx283); + + return ret; +} + +static void imx283_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct imx283 *imx283 = to_imx283(sd); + + v4l2_async_unregister_subdev(sd); + v4l2_subdev_cleanup(&imx283->sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(imx283->sd.ctrl_handler); + + pm_runtime_disable(imx283->dev); + if (!pm_runtime_status_suspended(imx283->dev)) + imx283_power_off(imx283); + pm_runtime_set_suspended(imx283->dev); +} + +static DEFINE_RUNTIME_DEV_PM_OPS(imx283_pm_ops, imx283_runtime_suspend, + imx283_runtime_resume, NULL); + +static const struct of_device_id imx283_dt_ids[] = { + { .compatible = "sony,imx283" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx283_dt_ids); + +static struct i2c_driver imx283_i2c_driver = { + .driver = { + .name = "imx283", + .pm = pm_ptr(&imx283_pm_ops), + .of_match_table = imx283_dt_ids, + }, + .probe = imx283_probe, + .remove = imx283_remove, +}; +module_i2c_driver(imx283_i2c_driver); + +MODULE_AUTHOR("Will Whang <will@willwhang.com>"); +MODULE_AUTHOR("Kieran Bingham <kieran.bingham@ideasonboard.com>"); +MODULE_AUTHOR("Umang Jain <umang.jain@ideasonboard.com>"); +MODULE_DESCRIPTION("Sony IMX283 Sensor Driver"); +MODULE_LICENSE("GPL"); -- 2.43.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain @ 2024-03-13 8:55 ` Andy Shevchenko 2024-03-13 11:12 ` Umang Jain 2024-03-13 14:52 ` Kieran Bingham ` (2 subsequent siblings) 3 siblings, 1 reply; 11+ messages in thread From: Andy Shevchenko @ 2024-03-13 8:55 UTC (permalink / raw) To: Umang Jain Cc: linux-media, Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, open list On Wed, Mar 13, 2024 at 9:08 AM Umang Jain <umang.jain@ideasonboard.com> wrote: > > From: Kieran Bingham <kieran.bingham@ideasonboard.com> > > Add a v4l2 subdevice driver for the Sony IMX283 image sensor. > > The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with > Square Pixel for Color Cameras. > > The following features are supported: > - Manual exposure an gain control support > - vblank/hblank/link freq control support > - Test pattern support control > - Arbitrary horizontal and vertical cropping > - Supported resolution: > - 5472x3648 @ 20fps (SRGGB12) > - 5472x3648 @ 25fps (SRGGB10) > - 2736x1824 @ 50fps (SRGGB12) I have got only this patch and there is no word about changes. Please, either make sure you Cc'ed people in cover letter to all reviewers, and/or use a comment area (after '---' line to list the changes related to this patch). -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 8:55 ` Andy Shevchenko @ 2024-03-13 11:12 ` Umang Jain 0 siblings, 0 replies; 11+ messages in thread From: Umang Jain @ 2024-03-13 11:12 UTC (permalink / raw) To: Andy Shevchenko Cc: linux-media, Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, open list Hello Andy, On 13/03/24 2:25 pm, Andy Shevchenko wrote: > On Wed, Mar 13, 2024 at 9:08 AM Umang Jain <umang.jain@ideasonboard.com> wrote: >> From: Kieran Bingham <kieran.bingham@ideasonboard.com> >> >> Add a v4l2 subdevice driver for the Sony IMX283 image sensor. >> >> The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with >> Square Pixel for Color Cameras. >> >> The following features are supported: >> - Manual exposure an gain control support >> - vblank/hblank/link freq control support >> - Test pattern support control >> - Arbitrary horizontal and vertical cropping >> - Supported resolution: >> - 5472x3648 @ 20fps (SRGGB12) >> - 5472x3648 @ 25fps (SRGGB10) >> - 2736x1824 @ 50fps (SRGGB12) > I have got only this patch and there is no word about changes. Please, Sorry about that. I should have cc'ed your explicitly or perhaps there is a way to cc all recipients just for the cover. I have `cccmd ="`pwd`/scripts/get_maintainer.pl"` in my .gitconfig but I think I need to do extra to make sure everyone receives the cover-letter atleast. The changelog here: https://lore.kernel.org/linux-media/20240313070705.91140-1-umang.jain@ideasonboard.com/T/#m550b44ee8769b84e0c1419dc5bfd9a51414468d9 > either make sure you Cc'ed people in cover letter to all reviewers, > and/or use a comment area (after '---' line to list the changes > related to this patch). > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 8:55 ` Andy Shevchenko @ 2024-03-13 14:52 ` Kieran Bingham 2024-03-14 6:25 ` kernel test robot 2024-03-14 6:57 ` kernel test robot 3 siblings, 0 replies; 11+ messages in thread From: Kieran Bingham @ 2024-03-13 14:52 UTC (permalink / raw) To: Umang Jain, linux-media Cc: Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Umang Jain, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, Andy Shevchenko, linux-kernel Hi Umang, Some corrections to make on the frame/mode timings below that we seem to have missed before. Quoting Umang Jain (2024-03-13 07:06:59) > From: Kieran Bingham <kieran.bingham@ideasonboard.com> > > Add a v4l2 subdevice driver for the Sony IMX283 image sensor. > > The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with > Square Pixel for Color Cameras. > > The following features are supported: > - Manual exposure an gain control support > - vblank/hblank/link freq control support > - Test pattern support control > - Arbitrary horizontal and vertical cropping > - Supported resolution: > - 5472x3648 @ 20fps (SRGGB12) > - 5472x3648 @ 25fps (SRGGB10) > - 2736x1824 @ 50fps (SRGGB12) > > Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> > --- > MAINTAINERS | 1 + > drivers/media/i2c/Kconfig | 10 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/imx283.c | 1596 ++++++++++++++++++++++++++++++++++++ > 4 files changed, 1608 insertions(+) > create mode 100644 drivers/media/i2c/imx283.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 32f790c3a5f9..8169f0e41293 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -20375,6 +20375,7 @@ L: linux-media@vger.kernel.org > S: Maintained > T: git git://linuxtv.org/media_tree.git > F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > +F: drivers/media/i2c/imx283.c > > SONY IMX290 SENSOR DRIVER > M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 4c3435921f19..2090b06b1827 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -153,6 +153,16 @@ config VIDEO_IMX274 > This is a V4L2 sensor driver for the Sony IMX274 > CMOS image sensor. > > +config VIDEO_IMX283 > + tristate "Sony IMX283 sensor support" > + select V4L2_CCI_I2C > + help > + This is a V4L2 sensor driver for the Sony IMX283 > + CMOS image sensor. > + > + To compile this driver as a module, choose M here: the > + module will be called imx283. > + > config VIDEO_IMX290 > tristate "Sony IMX290 sensor support" > select REGMAP_I2C > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index dfbe6448b549..0fbd81f9f420 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_IMX214) += imx214.o > obj-$(CONFIG_VIDEO_IMX219) += imx219.o > obj-$(CONFIG_VIDEO_IMX258) += imx258.o > obj-$(CONFIG_VIDEO_IMX274) += imx274.o > +obj-$(CONFIG_VIDEO_IMX283) += imx283.o > obj-$(CONFIG_VIDEO_IMX290) += imx290.o > obj-$(CONFIG_VIDEO_IMX296) += imx296.o > obj-$(CONFIG_VIDEO_IMX319) += imx319.o > diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c > new file mode 100644 > index 000000000000..81fe2d4fd4d3 > --- /dev/null > +++ b/drivers/media/i2c/imx283.c > @@ -0,0 +1,1596 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * V4L2 Support for the IMX283 > + * > + * Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color > + * Cameras. > + * > + * Copyright (C) 2024 Ideas on Board Oy. > + * > + * Based on Sony IMX283 driver prepared by Will Whang > + * > + * Based on Sony imx477 camera driver > + * Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd > + */ > + ... > +/* Mode : resolution and related config values */ > +struct imx283_mode { > + unsigned int mode; > + > + /* Bits per pixel */ > + unsigned int bpp; > + > + /* Frame width */ > + unsigned int width; > + > + /* Frame height */ > + unsigned int height; > + > + /* > + * Minimum horizontal timing in pixel-units > + * > + * Note that HMAX is written in 72MHz units, and the datasheet assumes a > + * 720MHz link frequency. Convert datasheet values with the following: > + * > + * For 12 bpp modes (480Mbps) convert with: > + * hmax = [hmax in 72MHz units] * 480 / 72 > + * > + * For 10 bpp modes (576Mbps) convert with: > + * hmax = [hmax in 72MHz units] * 576 / 72 > + */ > + u32 min_hmax; > + > + /* minimum V-timing in lines */ > + u32 min_vmax; > + > + /* default H-timing */ > + u32 default_hmax; > + > + /* default V-timing */ > + u32 default_vmax; > + > + /* minimum SHR */ > + u32 min_shr; > + > + /* > + * Per-mode vertical crop constants used to calculate values > + * of IMX283REG_WIDCUT and IMX283_REG_VWINPOS. > + */ > + u32 veff; > + u32 vst; > + u32 vct; > + > + /* Horizontal and vertical binning ratio */ > + u8 hbin_ratio; > + u8 vbin_ratio; > + > + /* Optical Blanking */ > + u32 horizontal_ob; > + u32 vertical_ob; > + > + /* Analog crop rectangle. */ > + struct v4l2_rect crop; > +}; ... > +/* Mode configs */ > +static const struct imx283_mode supported_modes_12bit[] = { > + { > + /* 20MPix 21.40 fps readout mode 0 */ > + .mode = IMX283_MODE_0, > + .bpp = 12, > + .width = 5472, > + .height = 3648, > + .min_hmax = 5914, /* 887 @ 480MHz/72MHz */ > + .min_vmax = 3793, /* Lines */ > + > + .veff = 3694, > + .vst = 0, > + .vct = 0, > + > + .hbin_ratio = 1, > + .vbin_ratio = 1, > + > + /* 20.00 FPS */ > + .default_hmax = 6000, /* 900 @ 480MHz/72MHz */ > + .default_vmax = 4000, > + > + .min_shr = 11, > + .horizontal_ob = 96, > + .vertical_ob = 16, > + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), > + }, > + { > + /* > + * Readout mode 2 : 2/2 binned mode (2736x1824) > + */ > + .mode = IMX283_MODE_2, > + .bpp = 12, > + .width = 2736, > + .height = 1824, > + .min_hmax = 1870, /* Pixels (362 * 360/72 + padding) */ I believe this should be .min_hmax = 2414, /* Pixels (362 * 480/72 + padding) */ > + .min_vmax = 3840, /* Lines */ > + > + /* 50.00 FPS */ > + .default_hmax = 1870, /* 362 @ 360MHz/72MHz */ > + .default_vmax = 3960, And for 50.00 FPS, these should be something like .default_hmax = 2500, /* 375 @ 480/72 */ .default_vmax = 3840, > + > + .veff = 1824, > + .vst = 0, > + .vct = 0, > + > + .hbin_ratio = 2, > + .vbin_ratio = 2, > + > + .min_shr = 12, > + .horizontal_ob = 48, > + .vertical_ob = 4, > + > + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), > + }, > +}; > + > +static const struct imx283_mode supported_modes_10bit[] = { > + { > + /* 20MPix 25.48 fps readout mode 1 */ > + .mode = IMX283_MODE_1, > + .bpp = 10, > + .width = 5472, > + .height = 3648, > + .min_hmax = 5960, /* 745 @ 576MHz / 72MHz */ > + .min_vmax = 3793, > + > + /* 25.00 FPS */ > + .default_hmax = 1500, /* 750 @ 576MHz / 72MHz */ This line has gone wrong somewhere. The default can't be lower than the min. I suspect it should be: = 6000, /* 750 @ 576MHz / 72MHz */ > + .default_vmax = 3840, > + > + .min_shr = 10, > + .horizontal_ob = 96, > + .vertical_ob = 16, > + .crop = CENTERED_RECTANGLE(imx283_active_area, 5472, 3648), > + }, > +}; -- Kieran ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 8:55 ` Andy Shevchenko 2024-03-13 14:52 ` Kieran Bingham @ 2024-03-14 6:25 ` kernel test robot 2024-03-14 6:57 ` kernel test robot 3 siblings, 0 replies; 11+ messages in thread From: kernel test robot @ 2024-03-14 6:25 UTC (permalink / raw) To: Umang Jain, linux-media Cc: llvm, oe-kbuild-all, Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Umang Jain, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, Andy Shevchenko, linux-kernel Hi Umang, kernel test robot noticed the following build errors: [auto build test ERROR on media-tree/master] [also build test ERROR on linuxtv-media-stage/master] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Umang-Jain/media-dt-bindings-media-Add-bindings-for-IMX283/20240313-151107 base: git://linuxtv.org/media_tree.git master patch link: https://lore.kernel.org/r/20240313070705.91140-3-umang.jain%40ideasonboard.com patch subject: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20240314/202403141412.K2tNvCOL-lkp@intel.com/config) compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 503c55e17037436dcd45ac69dea8967e67e3f5e8) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240314/202403141412.K2tNvCOL-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202403141412.K2tNvCOL-lkp@intel.com/ All errors (new ones prefixed by >>, old ones prefixed by <<): WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/imx/imx8mp-interconnect.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hte/hte-tegra194-test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/vdpa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/parport/parport.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/brcm_u-boot.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/tplink_safeloader.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_util.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_cmdset_0020.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/maps/map_funcs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio_pruss.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pcmcia/pcmcia_rsrc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vhost/vringh.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/greybus.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/gb-es2.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rpmsg/rpmsg_char.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/xilinx-ams.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/buffer/kfifo_buf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-hub.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-aspeed.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-ast-cf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-scom.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/siox/siox-bus-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/counter/ftm-quaddec.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/core/snd-pcm-dmaengine.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/drivers/snd-pcmtest.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/pci/hda/snd-hda-cirrus-scodec-test.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/soc-topology-test.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-ab8500-codec.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-sigmadsp.o WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x8 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text) WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-wm-adsp.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/qdsp6/snd-q6dsp-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-intel-atom.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-acpi-intel-byt.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-acpi-intel-bdw.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8m.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8ulp.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/imx-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mtk-adsp-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mt8195/snd-sof-mt8195.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mt8186/snd-sof-mt8186.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-utils.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-acpi.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-of.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/xilinx/snd-soc-xlnx-i2s.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/xilinx/snd-soc-xlnx-formatter-pcm.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/ac97_bus.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mtty.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy-fb.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mbochs.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/configfs/configfs_sample.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/bytestream-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/dma-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/inttype-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/record-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kobject/kobject-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kobject/kset-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/mip6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/sit.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ip6_udp_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/key/af_key.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/atm/mpoa.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/6lowpan/6lowpan.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ieee802154/6lowpan/ieee802154_6lowpan.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ieee802154/ieee802154_socket.o >> ERROR: modpost: "__hexagon_udivdi3" [drivers/media/i2c/imx283.ko] undefined! -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain ` (2 preceding siblings ...) 2024-03-14 6:25 ` kernel test robot @ 2024-03-14 6:57 ` kernel test robot 2024-03-14 9:57 ` Andy Shevchenko 3 siblings, 1 reply; 11+ messages in thread From: kernel test robot @ 2024-03-14 6:57 UTC (permalink / raw) To: Umang Jain, linux-media Cc: oe-kbuild-all, Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Umang Jain, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, Andy Shevchenko, linux-kernel Hi Umang, kernel test robot noticed the following build errors: [auto build test ERROR on media-tree/master] [also build test ERROR on linuxtv-media-stage/master] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Umang-Jain/media-dt-bindings-media-Add-bindings-for-IMX283/20240313-151107 base: git://linuxtv.org/media_tree.git master patch link: https://lore.kernel.org/r/20240313070705.91140-3-umang.jain%40ideasonboard.com patch subject: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver config: m68k-allmodconfig (https://download.01.org/0day-ci/archive/20240314/202403141436.KEQj1YzE-lkp@intel.com/config) compiler: m68k-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240314/202403141436.KEQj1YzE-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202403141436.KEQj1YzE-lkp@intel.com/ All errors (new ones prefixed by >>, old ones prefixed by <<): WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/tplink_safeloader.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_util.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_cmdset_0020.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/maps/map_funcs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio_pruss.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pcmcia/pcmcia_rsrc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pcmcia/i82365.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vhost/vringh.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/greybus.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/gb-es2.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rpmsg/rpmsg_char.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/xilinx-ams.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/buffer/kfifo_buf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-hub.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-aspeed.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-ast-cf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-scom.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/siox/siox-bus-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/counter/ftm-quaddec.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/oss/dmasound/dmasound_core.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/oss/dmasound/dmasound_atari.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/oss/dmasound/dmasound_paula.o WARNING: modpost: sound/oss/dmasound/dmasound_paula: section mismatch in reference: amiga_audio_driver+0x8 (section: .data) -> amiga_audio_remove (section: .exit.text) WARNING: modpost: missing MODULE_DESCRIPTION() in sound/core/snd-pcm-dmaengine.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/drivers/snd-pcmtest.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/pci/hda/snd-hda-cirrus-scodec-test.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/soc-topology-test.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-ab8500-codec.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-sigmadsp.o WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x8 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text) WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/codecs/snd-soc-wm-adsp.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/qdsp6/snd-q6dsp-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-intel-atom.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-acpi-intel-byt.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/intel/snd-sof-acpi-intel-bdw.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8m.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/snd-sof-imx8ulp.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/imx/imx-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mtk-adsp-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mt8195/snd-sof-mt8195.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/mediatek/mt8186/snd-sof-mt8186.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-utils.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-acpi.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/sof/snd-sof-of.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/xilinx/snd-soc-xlnx-i2s.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/xilinx/snd-soc-xlnx-formatter-pcm.o WARNING: modpost: missing MODULE_DESCRIPTION() in sound/ac97_bus.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mtty.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy-fb.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mbochs.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/configfs/configfs_sample.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/bytestream-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/dma-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/inttype-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kfifo/record-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kobject/kobject-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kobject/kset-example.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/mip6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/sit.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ip6_udp_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/key/af_key.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/atm/mpoa.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/6lowpan/6lowpan.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ieee802154/6lowpan/ieee802154_6lowpan.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ieee802154/ieee802154_socket.o >> ERROR: modpost: "__udivdi3" [drivers/media/i2c/imx283.ko] undefined! -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver 2024-03-14 6:57 ` kernel test robot @ 2024-03-14 9:57 ` Andy Shevchenko 0 siblings, 0 replies; 11+ messages in thread From: Andy Shevchenko @ 2024-03-14 9:57 UTC (permalink / raw) To: kernel test robot Cc: Umang Jain, linux-media, oe-kbuild-all, Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Mauro Carvalho Chehab, Hans Verkuil, Hans de Goede, Alain Volmat, Paul Elder, Mehdi Djait, Bingbu Cao, linux-kernel On Thu, Mar 14, 2024 at 8:57 AM kernel test robot <lkp@intel.com> wrote: > > Hi Umang, > > kernel test robot noticed the following build errors: > > [auto build test ERROR on media-tree/master] > [also build test ERROR on linuxtv-media-stage/master] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch#_base_tree_information] > > url: https://github.com/intel-lab-lkp/linux/commits/Umang-Jain/media-dt-bindings-media-Add-bindings-for-IMX283/20240313-151107 > base: git://linuxtv.org/media_tree.git master > patch link: https://lore.kernel.org/r/20240313070705.91140-3-umang.jain%40ideasonboard.com > patch subject: [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver > config: m68k-allmodconfig (https://download.01.org/0day-ci/archive/20240314/202403141436.KEQj1YzE-lkp@intel.com/config) > compiler: m68k-linux-gcc (GCC) 13.2.0 > reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240314/202403141436.KEQj1YzE-lkp@intel.com/reproduce) > > If you fix the issue in a separate patch/commit (i.e. not just a new version of > the same patch/commit), kindly add following tags > | Reported-by: kernel test robot <lkp@intel.com> > | Closes: https://lore.kernel.org/oe-kbuild-all/202403141436.KEQj1YzE-lkp@intel.com/ > > All errors (new ones prefixed by >>, old ones prefixed by <<): ... > >> ERROR: modpost: "__udivdi3" [drivers/media/i2c/imx283.ko] undefined! I believe I have commented on a suspicious line (during v1 or v2 review round). Seems nobody reacted :-) -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver 2024-03-13 7:06 [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 7:06 ` [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 Umang Jain 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain @ 2024-03-19 13:10 ` Umang Jain 2 siblings, 0 replies; 11+ messages in thread From: Umang Jain @ 2024-03-19 13:10 UTC (permalink / raw) To: linux-media Cc: Kieran Bingham, Laurent Pinchart, willl will, Sakari Ailus, tomi.valkeinen, Mauro Carvalho Chehab, Hans Verkuil, open list Hello, Ping for review and also the streams API streams_mask issue mentioned below. Is anyone interested in looking at this particular issue? On 13/03/24 12:36 pm, Umang Jain wrote: > Add a v4l2 subdevice driver for the Sony IMX283 image sensor. > > The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with > Square Pixel for Color Cameras. > > The following features are supported: > - Manual exposure an gain control support > - vblank/hblank/link freq control support > - Test pattern support control > - Arbitrary horizontal and vertical cropping > - Supported resolution: > - 5472x3648 @ 20fps (SRGGB12) > - 5472x3648 @ 25fps (SRGGB10) > - 2736x1824 @ 50fps (SRGGB12) > > The driver is tested on mainline branch v6.8-rc2 on IMX8MP Debix-SOM-A. > Additional testing has been done on RPi5 with the downstream BSP. > > Changes in v3: > - fix headers includes > - Improve #define(s) readability > - Drop __func__ from error logs > - Use HZ_PER_MHZ instead of MEGA > - mdsel* variables should be u8 > - Use container_of_const() instead of container_of() > - Use clamp() used of clamp_t variant > - Use streams API imx283_{enable|disable}_streams (**NOTE**) > - Properly fix PM runtime handling > (pm_ptr(), DEFINE_RUNTIME_DEV_PM_OPS, > imx283_runtime_suspend, imx283_runtime_resume) > - Fix format modifiers, signed-ness at various places > > > **NOTE** > There is streams mask issue, as no routes are defined with 1 pad: > For testing, I have the following applied locally: > ``` > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > index 4c6198c48dd6..38545d779620 100644 > --- a/drivers/media/v4l2-core/v4l2-subdev.c > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > @@ -2115,8 +2115,10 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad, > if (pad >= sd->entity.num_pads) > return -EINVAL; > > - if (!streams_mask) > - return 0; > + if (!streams_mask) { > + dev_err(sd->dev, "no streams mask, returning ....\n"); > + //return 0; > + } > > /* Fallback on .s_stream() if .enable_streams() isn't available. */ > if (!sd->ops->pad || !sd->ops->pad->enable_streams) > ``` > > changes in v2 (summary): > - Use u32 wherever possible > - Use MEGA macro instead of self defined MHZ() macro > - Properly refine regs using CCI > - Drop tracking of current mode. Shifted to infer from active state directly. > (Laurent's review) > - Cont. from above: Pass the struct imx283_mode to functions whereever required. > - Remove unused comments > - Remove custom mutex. Use control handler one instead. > - Drop imx283_reset_colorspace() and inline > - Set colorspace field properly (drop _DEFAULTS) > - Use __maybe_unused for imx283_power_on() and imx283_power_off() > - Store controls v4l2_ctrl handles for those required, not all. > - Drop imx283_free_controls(). Use v4l2_ctrl_handler_free > - fix reset-gpios handling and add it to DT schema > - fix data-lanes property in DT schema > - fix IMX283 Kconfig > - Remove unused macros > - Alphabetical case consistency > > Kieran Bingham (1): > media: i2c: Add imx283 camera sensor driver > > Umang Jain (1): > media: dt-bindings: media: Add bindings for IMX283 > > .../bindings/media/i2c/sony,imx283.yaml | 107 ++ > MAINTAINERS | 9 + > drivers/media/i2c/Kconfig | 10 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/imx283.c | 1596 +++++++++++++++++ > 5 files changed, 1723 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml > create mode 100644 drivers/media/i2c/imx283.c > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2024-03-19 13:10 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-03-13 7:06 [PATCH v3 0/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 7:06 ` [PATCH v3 1/2] media: dt-bindings: media: Add bindings for IMX283 Umang Jain 2024-03-13 21:21 ` Laurent Pinchart 2024-03-13 7:06 ` [PATCH v3 2/2] media: i2c: Add imx283 camera sensor driver Umang Jain 2024-03-13 8:55 ` Andy Shevchenko 2024-03-13 11:12 ` Umang Jain 2024-03-13 14:52 ` Kieran Bingham 2024-03-14 6:25 ` kernel test robot 2024-03-14 6:57 ` kernel test robot 2024-03-14 9:57 ` Andy Shevchenko 2024-03-19 13:10 ` [PATCH v3 0/2] " Umang Jain
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox