Re: [REGRESSION] Thunderbolt Host Reset Change Causes eGPU Disconnection from 6.8.7=>6.8.8

Re: [REGRESSION] Thunderbolt Host Reset Change Causes eGPU Disconnection from 6.8.7=>6.8.8

[Gia]

Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
TS3 Plus Thunderbolt 3 dock.

After the update I see this message on boot "xHCI host controller not
responding, assume dead" and the dock is not working anymore. Kernel
6.8.7 works great.

Re: [REGRESSION] Thunderbolt Host Reset Change Causes eGPU Disconnection from 6.8.7=>6.8.8

[Linux regression tracking (Thorsten Leemhuis)]

[CCing Mario, who asked for the two suspected commits to be backported]

On 06.05.24 14:24, Gia wrote:
> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> TS3 Plus Thunderbolt 3 dock.
> 
> After the update I see this message on boot "xHCI host controller not
> responding, assume dead" and the dock is not working anymore. Kernel
> 6.8.7 works great.

Thx for the report. Could you make the kernel log (journalctl -k/dmesg)
accessible somewhere?

And have you looked into the other stuff that Mario suggested in the
other thread? See the following mail and the reply to it for details:

https://lore.kernel.org/all/1eb96465-0a81-4187-b8e7-607d85617d5f@gmail.com/T/#u

Ciao, Thorsten

P.S.: To be sure the issue doesn't fall through the cracks unnoticed,
I'm adding it to regzbot, the Linux kernel regression tracking bot:

#regzbot ^introduced v6.8.7..v6.8.8
#regzbot title thunderbolt: TB3 dock problems, xHCI host controller not
responding, assume dead

Re: [REGRESSION] Thunderbolt Host Reset Change Causes eGPU Disconnection from 6.8.7=>6.8.8

[Gia]

Hi Thorsten,

I'll try to provide a kernel log ASAP, it's not that easy because when
I run into this issue my keyboard isn't working. The kernel parameter
that Mario suggested, thunderbolt.host_reset=false, fixes the issue!

I can add that without the suggested kernel parameter the issue
persists with the latest Archlinux kernel 6.9.1.

I also found another report of the issue on Archlinux forum:
https://bbs.archlinux.org/viewtopic.php?id=295824


On Mon, May 6, 2024 at 2:53 PM Linux regression tracking (Thorsten
Leemhuis) <regressions@leemhuis.info> wrote:
>
> [CCing Mario, who asked for the two suspected commits to be backported]
>
> On 06.05.24 14:24, Gia wrote:
> > Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> > TS3 Plus Thunderbolt 3 dock.
> >
> > After the update I see this message on boot "xHCI host controller not
> > responding, assume dead" and the dock is not working anymore. Kernel
> > 6.8.7 works great.
>
> Thx for the report. Could you make the kernel log (journalctl -k/dmesg)
> accessible somewhere?
>
> And have you looked into the other stuff that Mario suggested in the
> other thread? See the following mail and the reply to it for details:
>
> https://lore.kernel.org/all/1eb96465-0a81-4187-b8e7-607d85617d5f@gmail.com/T/#u
>
> Ciao, Thorsten
>
> P.S.: To be sure the issue doesn't fall through the cracks unnoticed,
> I'm adding it to regzbot, the Linux kernel regression tracking bot:
>
> #regzbot ^introduced v6.8.7..v6.8.8
> #regzbot title thunderbolt: TB3 dock problems, xHCI host controller not
> responding, assume dead

Re: [REGRESSION] Thunderbolt Host Reset Change Causes eGPU Disconnection from 6.8.7=>6.8.8

[Mario Limonciello]

Can we please get some kernel logs for these two cases on the command line?

thunderbolt.dyndbg=+p
thunderbolt.dyndbg=+p thunderbolt.host_reset=false

Also what is the value for:

$ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection

That won't change in the two cases, but it will be really helpful to 
understand this issue.

On 5/20/2024 04:19, Gia wrote:
> Hi Thorsten,
> 
> I'll try to provide a kernel log ASAP, it's not that easy because when
> I run into this issue my keyboard isn't working. The kernel parameter
> that Mario suggested, thunderbolt.host_reset=false, fixes the issue!
> 
> I can add that without the suggested kernel parameter the issue
> persists with the latest Archlinux kernel 6.9.1.
> 
> I also found another report of the issue on Archlinux forum:
> https://bbs.archlinux.org/viewtopic.php?id=295824
> 
> 
> On Mon, May 6, 2024 at 2:53 PM Linux regression tracking (Thorsten
> Leemhuis) <regressions@leemhuis.info> wrote:
>>
>> [CCing Mario, who asked for the two suspected commits to be backported]
>>
>> On 06.05.24 14:24, Gia wrote:
>>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
>>> TS3 Plus Thunderbolt 3 dock.
>>>
>>> After the update I see this message on boot "xHCI host controller not
>>> responding, assume dead" and the dock is not working anymore. Kernel
>>> 6.8.7 works great.
>>
>> Thx for the report. Could you make the kernel log (journalctl -k/dmesg)
>> accessible somewhere?
>>
>> And have you looked into the other stuff that Mario suggested in the
>> other thread? See the following mail and the reply to it for details:
>>
>> https://lore.kernel.org/all/1eb96465-0a81-4187-b8e7-607d85617d5f@gmail.com/T/#u
>>
>> Ciao, Thorsten
>>
>> P.S.: To be sure the issue doesn't fall through the cracks unnoticed,
>> I'm adding it to regzbot, the Linux kernel regression tracking bot:
>>
>> #regzbot ^introduced v6.8.7..v6.8.8
>> #regzbot title thunderbolt: TB3 dock problems, xHCI host controller not
>> responding, assume dead

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Christian Heusel]

[-- Attachment #1: Type: text/plain, Size: 1563 bytes --]

On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> [CCing Mario, who asked for the two suspected commits to be backported]
> 
> On 06.05.24 14:24, Gia wrote:
> > Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> > TS3 Plus Thunderbolt 3 dock.
> > 
> > After the update I see this message on boot "xHCI host controller not
> > responding, assume dead" and the dock is not working anymore. Kernel
> > 6.8.7 works great.

We now have some further information on the matter as somebody was kind
enough to bisect the issue in the [Arch Linux Forums][0]:

    cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")

This is a stable commit id, the relevant mainline commit is:

    59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")

The other reporter created [a issue][1] in our bugtracker, which I'll
leave here just for completeness sake.

Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
Reported-by: Gia <giacomo.gio@gmail.com>
Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>

The person doing the bisection also offered to chime in here if further
debugging is needed!

Also CC'ing the Commitauthors & Subsystem Maintainers for this report.

Cheers,
Christian

[0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
[1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48

#regzbot introduced: 59a54c5f3dbd
#regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mario Limonciello]

On 5/20/2024 09:39, Christian Heusel wrote:
> On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
>> [CCing Mario, who asked for the two suspected commits to be backported]
>>
>> On 06.05.24 14:24, Gia wrote:
>>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
>>> TS3 Plus Thunderbolt 3 dock.
>>>
>>> After the update I see this message on boot "xHCI host controller not
>>> responding, assume dead" and the dock is not working anymore. Kernel
>>> 6.8.7 works great.
> 
> We now have some further information on the matter as somebody was kind
> enough to bisect the issue in the [Arch Linux Forums][0]:
> 
>      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> 
> This is a stable commit id, the relevant mainline commit is:
> 
>      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> 
> The other reporter created [a issue][1] in our bugtracker, which I'll
> leave here just for completeness sake.
> 
> Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> Reported-by: Gia <giacomo.gio@gmail.com>
> Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> 
> The person doing the bisection also offered to chime in here if further
> debugging is needed!
> 
> Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> 
> Cheers,
> Christian
> 
> [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> 
> #regzbot introduced: 59a54c5f3dbd
> #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48

As I mentioned in my other email I would like to collate logs onto a 
kernel Bugzilla.  With these two cases:

thunderbolt.dyndbg=+p
thunderbolt.dyndbg=+p thunderbolt.host_reset=false

Also what is the value for:

$ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Benjamin Böhmke]

[-- Attachment #1: Type: text/plain, Size: 2360 bytes --]

On Monday, May 20, 2024 16:41 CEST, Mario Limonciello <mario.limonciello@amd.com> wrote:

> On 5/20/2024 09:39, Christian Heusel wrote:
> > On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> >> [CCing Mario, who asked for the two suspected commits to be backported]
> >>
> >> On 06.05.24 14:24, Gia wrote:
> >>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> >>> TS3 Plus Thunderbolt 3 dock.
> >>>
> >>> After the update I see this message on boot "xHCI host controller not
> >>> responding, assume dead" and the dock is not working anymore. Kernel
> >>> 6.8.7 works great.
> > 
> > We now have some further information on the matter as somebody was kind
> > enough to bisect the issue in the [Arch Linux Forums][0]:
> > 
> >      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> > 
> > This is a stable commit id, the relevant mainline commit is:
> > 
> >      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> > 
> > The other reporter created [a issue][1] in our bugtracker, which I'll
> > leave here just for completeness sake.
> > 
> > Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> > Reported-by: Gia <giacomo.gio@gmail.com>
> > Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> > 
> > The person doing the bisection also offered to chime in here if further
> > debugging is needed!
> > 
> > Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> > 
> > Cheers,
> > Christian
> > 
> > [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> > [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > 
> > #regzbot introduced: 59a54c5f3dbd
> > #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> 
> As I mentioned in my other email I would like to collate logs onto a 
> kernel Bugzilla.  With these two cases:
> 
> thunderbolt.dyndbg=+p
> thunderbolt.dyndbg=+p thunderbolt.host_reset=false
> 
> Also what is the value for:
> 
> $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection

I attached the requested kernel logs as text files (hope this is ok).
In both cases I used the stable ArchLinux kernel 6.9.1

The iommu_dma_protection is both cases "1".

Best Regards
Benjamin

[-- Attachment #2: dmesg_tb_dbg__reset_false.txt --]
[-- Type: text/plain, Size: 109983 bytes --]

[    0.000000] Linux version 6.9.1-arch1-1 (linux@archlinux) (gcc (GCC) 14.1.1 20240507, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri, 17 May 2024 16:56:38 +0000
[    0.000000] Command line: initrd=\initramfs-linux.img root=LABEL=arch rw resume=swap thunderbolt.dyndbg=+p thunderbolt.host_reset=false
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f7b3000-0x0000000042f55fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000042f56000-0x0000000043041fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000043042000-0x0000000043170fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000043171000-0x0000000043efefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000043eff000-0x0000000043efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000043f00000-0x0000000049ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004a200000-0x000000004a3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004b000000-0x00000000503fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008afbfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.8 by American Megatrends
[    0.000000] efi: ACPI=0x430cc000 ACPI 2.0=0x430cc014 SMBIOS=0x43c0f000 SMBIOS 3.0=0x43c0e000 MEMATTR=0x3b7ba018 ESRT=0x3bf08098 INITRD=0x38a01218 RNG=0x42f85018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem72: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[    0.000000] efi: Not removing mem73: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem74: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem75: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem77: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem78: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.4.0 present.
[    0.000000] DMI: TUXEDO TUXEDO InfinityBook Pro Gen7 (MK1)/PHxARX1_PHxAQF1, BIOS N.1.05A07 11/07/2022
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.000000] tsc: Detected 2688.000 MHz TSC
[    0.000373] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000375] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000380] last_pfn = 0x8afc00 max_arch_pfn = 0x400000000
[    0.000383] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000384] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000777] last_pfn = 0x43f00 max_arch_pfn = 0x400000000
[    0.012685] esrt: Reserving ESRT space from 0x000000003bf08098 to 0x000000003bf08170.
[    0.012689] e820: update [mem 0x3bf08000-0x3bf08fff] usable ==> reserved
[    0.012699] Using GB pages for direct mapping
[    0.012699] Incomplete global flushes, disabling PCID
[    0.012847] Secure boot disabled
[    0.012847] RAMDISK: [mem 0x32aff000-0x33afdfff]
[    0.012873] ACPI: Early table checksum verification disabled
[    0.012875] ACPI: RSDP 0x00000000430CC014 000024 (v02 ALASKA)
[    0.012878] ACPI: XSDT 0x00000000430CB728 000104 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012882] ACPI: FACP 0x000000004303F000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[    0.012885] ACPI: DSDT 0x0000000042FC6000 078134 (v02 ALASKA A M I    01072009 INTL 20200717)
[    0.012888] ACPI: FACS 0x000000004316F000 000040
[    0.012889] ACPI: FIDT 0x0000000042FC5000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012891] ACPI: SSDT 0x0000000043041000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[    0.012893] ACPI: SSDT 0x0000000042FBF000 005D0B (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[    0.012895] ACPI: SSDT 0x0000000042FBC000 002AA1 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[    0.012897] ACPI: SSDT 0x0000000042FB8000 0033D3 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.012899] ACPI: SSDT 0x0000000042FAA000 00D337 (v02 INTEL  TcssSsdt 00001000 INTL 20200717)
[    0.012901] ACPI: HPET 0x0000000043040000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012902] ACPI: APIC 0x0000000042FA9000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[    0.012904] ACPI: MCFG 0x0000000042FA8000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012906] ACPI: SSDT 0x0000000042FA1000 00669F (v02 ALASKA AdlP_Rvp 00001000 INTL 20200717)
[    0.012908] ACPI: SSDT 0x0000000042F9F000 001E89 (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[    0.012910] ACPI: UEFI 0x00000000430B1000 000048 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012911] ACPI: NHLT 0x0000000042F9E000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.012913] ACPI: LPIT 0x0000000042F9D000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012915] ACPI: SSDT 0x0000000042F99000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[    0.012917] ACPI: SSDT 0x0000000042F96000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[    0.012919] ACPI: DBGP 0x0000000042F95000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012920] ACPI: DBG2 0x0000000042F94000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.012922] ACPI: SSDT 0x0000000042F92000 0014F5 (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    0.012924] ACPI: DMAR 0x0000000042F91000 000088 (v02 INTEL  EDK2     00000002      01000013)
[    0.012926] ACPI: SSDT 0x0000000042F90000 000CAA (v02 INTEL  xh_adlLP 00000000 INTL 20200717)
[    0.012928] ACPI: SSDT 0x0000000042F8C000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[    0.012930] ACPI: SSDT 0x0000000042F89000 002B2A (v02 SocCmn SocCmn   00003000 INTL 20200717)
[    0.012931] ACPI: BGRT 0x0000000042F88000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012933] ACPI: PHAT 0x0000000042F87000 000611 (v00 ALASKA A M I    00000005 MSFT 0100000D)
[    0.012935] ACPI: WSMT 0x0000000042F9C000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012937] ACPI: FPDT 0x0000000042F86000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012938] ACPI: Reserving FACP table memory at [mem 0x4303f000-0x4303f113]
[    0.012939] ACPI: Reserving DSDT table memory at [mem 0x42fc6000-0x4303e133]
[    0.012940] ACPI: Reserving FACS table memory at [mem 0x4316f000-0x4316f03f]
[    0.012940] ACPI: Reserving FIDT table memory at [mem 0x42fc5000-0x42fc509b]
[    0.012941] ACPI: Reserving SSDT table memory at [mem 0x43041000-0x4304138b]
[    0.012941] ACPI: Reserving SSDT table memory at [mem 0x42fbf000-0x42fc4d0a]
[    0.012942] ACPI: Reserving SSDT table memory at [mem 0x42fbc000-0x42fbeaa0]
[    0.012942] ACPI: Reserving SSDT table memory at [mem 0x42fb8000-0x42fbb3d2]
[    0.012943] ACPI: Reserving SSDT table memory at [mem 0x42faa000-0x42fb7336]
[    0.012943] ACPI: Reserving HPET table memory at [mem 0x43040000-0x43040037]
[    0.012944] ACPI: Reserving APIC table memory at [mem 0x42fa9000-0x42fa91db]
[    0.012944] ACPI: Reserving MCFG table memory at [mem 0x42fa8000-0x42fa803b]
[    0.012945] ACPI: Reserving SSDT table memory at [mem 0x42fa1000-0x42fa769e]
[    0.012945] ACPI: Reserving SSDT table memory at [mem 0x42f9f000-0x42fa0e88]
[    0.012946] ACPI: Reserving UEFI table memory at [mem 0x430b1000-0x430b1047]
[    0.012946] ACPI: Reserving NHLT table memory at [mem 0x42f9e000-0x42f9e02c]
[    0.012947] ACPI: Reserving LPIT table memory at [mem 0x42f9d000-0x42f9d0cb]
[    0.012947] ACPI: Reserving SSDT table memory at [mem 0x42f99000-0x42f9ba82]
[    0.012948] ACPI: Reserving SSDT table memory at [mem 0x42f96000-0x42f98356]
[    0.012948] ACPI: Reserving DBGP table memory at [mem 0x42f95000-0x42f95033]
[    0.012949] ACPI: Reserving DBG2 table memory at [mem 0x42f94000-0x42f94053]
[    0.012949] ACPI: Reserving SSDT table memory at [mem 0x42f92000-0x42f934f4]
[    0.012950] ACPI: Reserving DMAR table memory at [mem 0x42f91000-0x42f91087]
[    0.012950] ACPI: Reserving SSDT table memory at [mem 0x42f90000-0x42f90ca9]
[    0.012951] ACPI: Reserving SSDT table memory at [mem 0x42f8c000-0x42f8fae9]
[    0.012951] ACPI: Reserving SSDT table memory at [mem 0x42f89000-0x42f8bb29]
[    0.012951] ACPI: Reserving BGRT table memory at [mem 0x42f88000-0x42f88037]
[    0.012952] ACPI: Reserving PHAT table memory at [mem 0x42f87000-0x42f87610]
[    0.012952] ACPI: Reserving WSMT table memory at [mem 0x42f9c000-0x42f9c027]
[    0.012953] ACPI: Reserving FPDT table memory at [mem 0x42f86000-0x42f86043]
[    0.013331] No NUMA configuration found
[    0.013332] Faking a node at [mem 0x0000000000000000-0x00000008afbfffff]
[    0.013333] NODE_DATA(0) allocated [mem 0x8afbfb000-0x8afbfffff]
[    0.013358] Zone ranges:
[    0.013359]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013360]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013361]   Normal   [mem 0x0000000100000000-0x00000008afbfffff]
[    0.013361]   Device   empty
[    0.013362] Movable zone start for each node
[    0.013362] Early memory node ranges
[    0.013363]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.013363]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.013364]   node   0: [mem 0x0000000000100000-0x000000003f7b2fff]
[    0.013365]   node   0: [mem 0x0000000043eff000-0x0000000043efffff]
[    0.013365]   node   0: [mem 0x0000000100000000-0x00000008afbfffff]
[    0.013367] Initmem setup node 0 [mem 0x0000000000001000-0x00000008afbfffff]
[    0.013369] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013370] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013386] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.014591] On node 0, zone DMA32: 18252 pages in unavailable ranges
[    0.049556] On node 0, zone Normal: 16640 pages in unavailable ranges
[    0.049563] On node 0, zone Normal: 1024 pages in unavailable ranges
[    0.049596] Reserving Intel graphics memory at [mem 0x4c800000-0x503fffff]
[    0.050496] ACPI: PM-Timer IO Port: 0x1808
[    0.050502] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.050503] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.050504] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.050504] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.050504] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.050505] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.050505] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.050506] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.050506] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.050506] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.050507] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.050507] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.050507] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.050508] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.050508] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.050508] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.050509] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.050509] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.050510] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.050510] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.050510] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.050511] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.050511] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.050511] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.050595] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.050596] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.050598] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.050600] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.050601] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.050605] e820: update [mem 0x38a23000-0x38a9efff] usable ==> reserved
[    0.050612] TSC deadline timer available
[    0.050614] CPU topo: Max. logical packages:   1
[    0.050615] CPU topo: Max. logical dies:       1
[    0.050615] CPU topo: Max. dies per package:   1
[    0.050617] CPU topo: Max. threads per core:   2
[    0.050617] CPU topo: Num. cores per package:    14
[    0.050618] CPU topo: Num. threads per package:  20
[    0.050618] CPU topo: Allowing 20 present CPUs plus 0 hotplug CPUs
[    0.050628] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.050629] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.050630] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.050631] PM: hibernation: Registered nosave memory: [mem 0x38a23000-0x38a9efff]
[    0.050632] PM: hibernation: Registered nosave memory: [mem 0x3bf08000-0x3bf08fff]
[    0.050633] PM: hibernation: Registered nosave memory: [mem 0x3f7b3000-0x42f55fff]
[    0.050633] PM: hibernation: Registered nosave memory: [mem 0x42f56000-0x43041fff]
[    0.050633] PM: hibernation: Registered nosave memory: [mem 0x43042000-0x43170fff]
[    0.050634] PM: hibernation: Registered nosave memory: [mem 0x43171000-0x43efefff]
[    0.050635] PM: hibernation: Registered nosave memory: [mem 0x43f00000-0x49ffffff]
[    0.050635] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff]
[    0.050635] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff]
[    0.050636] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff]
[    0.050636] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff]
[    0.050636] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfdffffff]
[    0.050637] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.050637] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.050637] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.050638] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.050638] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.050638] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.050639] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.050639] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.050639] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.050640] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.050641] [mem 0x50400000-0xfdffffff] available for PCI devices
[    0.050642] Booting paravirtualized kernel on bare hardware
[    0.050643] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.054560] setup_percpu: NR_CPUS:320 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
[    0.055438] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.055442] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.055444] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
[    0.055447] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 
[    0.055449] pcpu-alloc: [0] 16 17 18 19 
[    0.055459] Kernel command line: initrd=\initramfs-linux.img root=LABEL=arch rw resume=swap thunderbolt.dyndbg=+p thunderbolt.host_reset=false
[    0.055500] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.055501] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.055502] printk: log_buf_len min size: 131072 bytes
[    0.055606] printk: log_buf_len: 262144 bytes
[    0.055606] printk: early log buf free: 115272(87%)
[    0.057668] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.058710] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.058854] Fallback order for Node 0: 0 
[    0.058857] Built 1 zonelists, mobility grouping on.  Total pages: 8189669
[    0.058858] Policy zone: Normal
[    0.059009] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.059016] software IO TLB: area num 32.
[    0.107844] Memory: 32420000K/33279304K available (18432K kernel code, 2164K rwdata, 13276K rodata, 3408K init, 3636K bss, 859044K reserved, 0K cma-reserved)
[    0.108001] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.108032] ftrace: allocating 49689 entries in 195 pages
[    0.112440] ftrace: allocated 195 pages with 4 groups
[    0.112490] Dynamic Preempt: full
[    0.112559] rcu: Preemptible hierarchical RCU implementation.
[    0.112560] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=20.
[    0.112560] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.112561] 	Trampoline variant of Tasks RCU enabled.
[    0.112562] 	Rude variant of Tasks RCU enabled.
[    0.112562] 	Tracing variant of Tasks RCU enabled.
[    0.112563] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.112563] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.112569] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.112571] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.112573] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.114979] NR_IRQS: 20736, nr_irqs: 2216, preallocated irqs: 16
[    0.115330] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.115789] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.115815] Console: colour dummy device 80x25
[    0.115816] printk: legacy console [tty0] enabled
[    0.115845] ACPI: Core revision 20230628
[    0.116060] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.116060] APIC: Switch to symmetric I/O mode setup
[    0.116061] DMAR: Host address width 39
[    0.116062] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.116065] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.116067] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.116071] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.116072] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff
[    0.116075] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.116075] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.116076] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.120002] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.120004] x2apic enabled
[    0.120067] APIC: Switched APIC routing to: cluster x2apic
[    0.131334] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    0.131338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5378.00 BogoMIPS (lpj=8960000)
[    0.131385] CPU0: Thermal monitoring enabled (TM1)
[    0.131386] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.131484] CET detected: Indirect Branch Tracking enabled
[    0.131485] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.131486] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.131487] process: using mwait in idle threads
[    0.131489] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.131490] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit
[    0.131490] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall
[    0.131491] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.131491] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.131492] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.131493] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.131493] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.131494] Register File Data Sampling: Vulnerable: No microcode
[    0.131500] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.131501] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.131502] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.131502] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.131503] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.131503] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.131504] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.131505] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
[    0.131505] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[    0.134670] Freeing SMP alternatives memory: 40K
[    0.134670] pid_max: default: 32768 minimum: 301
[    0.134670] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.134670] landlock: Up and running.
[    0.134670] Yama: becoming mindful.
[    0.134670] LSM support for eBPF active
[    0.134670] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.134670] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.134670] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-12700H (family: 0x6, model: 0x9a, stepping: 0x3)
[    0.134670] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.134670] core: cpu_core PMU driver: 
[    0.134670] ... version:                5
[    0.134670] ... bit width:              48
[    0.134670] ... generic registers:      8
[    0.134670] ... value mask:             0000ffffffffffff
[    0.134670] ... max period:             00007fffffffffff
[    0.134670] ... fixed-purpose events:   4
[    0.134670] ... event mask:             0001000f000000ff
[    0.134670] signal: max sigframe size: 3632
[    0.134670] Estimated ratio of average max frequency by base frequency (times 1024): 1668
[    0.134670] rcu: Hierarchical SRCU implementation.
[    0.134670] rcu: 	Max phase no-delay instances is 1000.
[    0.134670] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.134670] smp: Bringing up secondary CPUs ...
[    0.134670] smpboot: x86: Booting SMP configuration:
[    0.134670] .... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #13 #14 #15 #16 #17 #18 #19
[    0.018965] core: cpu_atom PMU driver: PEBS-via-PT 
[    0.018965] ... version:                5
[    0.018965] ... bit width:              48
[    0.018965] ... generic registers:      6
[    0.018965] ... value mask:             0000ffffffffffff
[    0.018965] ... max period:             00007fffffffffff
[    0.018965] ... fixed-purpose events:   3
[    0.018965] ... event mask:             000000070000003f
[    0.138098]   #1  #3  #5  #7  #9 #11
[    0.144745] smp: Brought up 1 node, 20 CPUs
[    0.144745] smpboot: Total of 20 processors activated (107563.00 BogoMIPS)
[    0.148869] devtmpfs: initialized
[    0.148869] x86/mm: Memory block size: 128MB
[    0.149280] ACPI: PM: Registering ACPI NVS region [mem 0x43042000-0x43170fff] (1241088 bytes)
[    0.149280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.149280] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.149280] pinctrl core: initialized pinctrl subsystem
[    0.149280] PM: RTC time: 14:53:17, date: 2024-05-20
[    0.149280] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.151694] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.151925] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.152151] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.152155] audit: initializing netlink subsys (disabled)
[    0.152158] audit: type=2000 audit(1716216797.019:1): state=initialized audit_enabled=0 res=1
[    0.152158] thermal_sys: Registered thermal governor 'fair_share'
[    0.152158] thermal_sys: Registered thermal governor 'bang_bang'
[    0.152158] thermal_sys: Registered thermal governor 'step_wise'
[    0.152158] thermal_sys: Registered thermal governor 'user_space'
[    0.152158] thermal_sys: Registered thermal governor 'power_allocator'
[    0.152158] cpuidle: using governor ladder
[    0.152158] cpuidle: using governor menu
[    0.152158] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152158] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
[    0.152158] PCI: not using ECAM ([mem 0xc0000000-0xcfffffff] not reserved)
[    0.152158] PCI: Using configuration type 1 for base access
[    0.152158] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.152158] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.152158] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.152158] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.152158] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.154712] Demotion targets for Node 0: null
[    0.154894] ACPI: Added _OSI(Module Device)
[    0.154896] ACPI: Added _OSI(Processor Device)
[    0.154897] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.154898] ACPI: Added _OSI(Processor Aggregator Device)
[    0.263420] ACPI: 14 ACPI AML tables successfully acquired and loaded
[    0.283095] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[    0.283097] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[    0.284111] ACPI: Dynamic OEM Table Load:
[    0.284111] ACPI: SSDT 0xFFFF91D4C15F7800 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.284111] ACPI: Dynamic OEM Table Load:
[    0.284111] ACPI: SSDT 0xFFFF91D4C2322000 000626 (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.284468] ACPI: Dynamic OEM Table Load:
[    0.284473] ACPI: SSDT 0xFFFF91D4C2155A00 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.285726] ACPI: Dynamic OEM Table Load:
[    0.285731] ACPI: SSDT 0xFFFF91D4C2321000 0004BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.287299] ACPI: Dynamic OEM Table Load:
[    0.287307] ACPI: SSDT 0xFFFF91D4C15D4000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.289371] ACPI: Dynamic OEM Table Load:
[    0.289377] ACPI: SSDT 0xFFFF91D4C15D2000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.291038] ACPI: Dynamic OEM Table Load:
[    0.291044] ACPI: SSDT 0xFFFF91D4C2330000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.292943] ACPI: Dynamic OEM Table Load:
[    0.292949] ACPI: SSDT 0xFFFF91D4C15F9000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.302357] ACPI: _OSC evaluated successfully for all CPUs
[    0.302449] ACPI: EC: EC started
[    0.302450] ACPI: EC: interrupt blocked
[    0.304293] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.304295] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.304297] ACPI: Interpreter enabled
[    0.304348] ACPI: PM: (supports S0 S3 S4 S5)
[    0.304349] ACPI: Using IOAPIC for interrupt routing
[    0.305889] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
[    0.307672] PCI: ECAM [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.307682] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.307683] PCI: Using E820 reservations for host bridge windows
[    0.309293] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.310293] ACPI: \_SB_.PC00.PEG1.PXP_: New power resource
[    0.311052] ACPI: \_SB_.PC00.PEG2.PXP_: New power resource
[    0.316605] ACPI: \_SB_.PC00.PEG0.PXP_: New power resource
[    0.321808] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
[    0.330797] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource
[    0.342480] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.351016] ACPI: \_SB_.PC00.TBT0: New power resource
[    0.351155] ACPI: \_SB_.PC00.TBT1: New power resource
[    0.351276] ACPI: \_SB_.PC00.D3C_: New power resource
[    0.482527] ACPI: \_TZ_.FN00: New power resource
[    0.482585] ACPI: \_TZ_.FN01: New power resource
[    0.482645] ACPI: \_TZ_.FN02: New power resource
[    0.482700] ACPI: \_TZ_.FN03: New power resource
[    0.482755] ACPI: \_TZ_.FN04: New power resource
[    0.483281] ACPI: \PIN_: New power resource
[    0.483590] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[    0.483595] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.485640] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.489664] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.492143] PCI host bridge to bus 0000:00
[    0.492145] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.492147] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.492149] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.492150] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.492151] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window]
[    0.492153] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.492154] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.608758] pci 0000:00:00.0: [8086:4641] type 00 class 0x060000 conventional PCI endpoint
[    0.608961] pci 0000:00:02.0: [8086:46a6] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.608969] pci 0000:00:02.0: BAR 0 [mem 0x601c000000-0x601cffffff 64bit]
[    0.608974] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.608977] pci 0000:00:02.0: BAR 4 [io  0x3000-0x303f]
[    0.608992] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.608994] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.609016] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit]
[    0.609017] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs
[    0.609021] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref]
[    0.609022] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs
[    0.609164] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000 conventional PCI endpoint
[    0.609177] pci 0000:00:04.0: BAR 0 [mem 0x601d140000-0x601d15ffff 64bit]
[    0.609546] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400 PCIe Root Port
[    0.609592] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.609677] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.609727] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[    0.610448] pci 0000:00:06.2: [8086:463d] type 01 class 0x060400 PCIe Root Port
[    0.610491] pci 0000:00:06.2: PCI bridge to [bus 02]
[    0.610499] pci 0000:00:06.2:   bridge window [mem 0x5e300000-0x5e3fffff]
[    0.610588] pci 0000:00:06.2: PME# supported from D0 D3hot D3cold
[    0.610637] pci 0000:00:06.2: PTM enabled (root), 4ns granularity
[    0.611482] pci 0000:00:07.0: [8086:466e] type 01 class 0x060400 PCIe Root Port
[    0.611498] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    0.611502] pci 0000:00:07.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    0.611508] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    0.611528] pci 0000:00:07.0: Overriding RP PIO Log Size to 4
[    0.611592] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.611612] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
[    0.612696] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000 conventional PCI endpoint
[    0.612704] pci 0000:00:08.0: BAR 0 [mem 0x601d199000-0x601d199fff 64bit]
[    0.612798] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
[    0.612805] pci 0000:00:0a.0: BAR 0 [mem 0x601d180000-0x601d187fff 64bit]
[    0.612822] pci 0000:00:0a.0: enabling Extended Tags
[    0.612926] pci 0000:00:0d.0: [8086:461e] type 00 class 0x0c0330 conventional PCI endpoint
[    0.612935] pci 0000:00:0d.0: BAR 0 [mem 0x601d170000-0x601d17ffff 64bit]
[    0.612973] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.613565] pci 0000:00:0d.2: [8086:463e] type 00 class 0x0c0340 conventional PCI endpoint
[    0.613574] pci 0000:00:0d.2: BAR 0 [mem 0x601d100000-0x601d13ffff 64bit]
[    0.613581] pci 0000:00:0d.2: BAR 2 [mem 0x601d198000-0x601d198fff 64bit]
[    0.613610] pci 0000:00:0d.2: supports D1 D2
[    0.613611] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.613904] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330 conventional PCI endpoint
[    0.613927] pci 0000:00:14.0: BAR 0 [mem 0x601d160000-0x601d16ffff 64bit]
[    0.614026] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.614807] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000 conventional PCI endpoint
[    0.614829] pci 0000:00:14.2: BAR 0 [mem 0x601d190000-0x601d193fff 64bit]
[    0.614843] pci 0000:00:14.2: BAR 2 [mem 0x601d197000-0x601d197fff 64bit]
[    0.615066] pci 0000:00:14.3: [8086:51f0] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
[    0.615127] pci 0000:00:14.3: BAR 0 [mem 0x601d18c000-0x601d18ffff 64bit]
[    0.615317] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.616151] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000 conventional PCI endpoint
[    0.616883] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.620305] pci 0000:00:1f.0: [8086:5182] type 00 class 0x060100 conventional PCI endpoint
[    0.620711] pci 0000:00:1f.3: [8086:51c8] type 00 class 0x040380 conventional PCI endpoint
[    0.620773] pci 0000:00:1f.3: BAR 0 [mem 0x601d188000-0x601d18bfff 64bit]
[    0.620846] pci 0000:00:1f.3: BAR 4 [mem 0x601d000000-0x601d0fffff 64bit]
[    0.621007] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.621761] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.621790] pci 0000:00:1f.4: BAR 0 [mem 0x601d194000-0x601d1940ff 64bit]
[    0.621815] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.622113] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000 conventional PCI endpoint
[    0.622134] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.622372] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.623194] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802 PCIe Endpoint
[    0.623208] pci 0000:02:00.0: BAR 0 [mem 0x5e300000-0x5e303fff 64bit]
[    0.623443] pci 0000:00:06.2: PCI bridge to [bus 02]
[    0.623512] pci 0000:03:00.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.623565] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    0.623579] pci 0000:03:00.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.623615] pci 0000:03:00.0: enabling Extended Tags
[    0.623793] pci 0000:03:00.0: supports D1 D2
[    0.623794] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.623956] pci 0000:03:00.0: PTM enabled, 4ns granularity
[    0.624004] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.631383] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    0.631515] pci 0000:04:02.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.631569] pci 0000:04:02.0: PCI bridge to [bus 05]
[    0.631583] pci 0000:04:02.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.631624] pci 0000:04:02.0: enabling Extended Tags
[    0.631796] pci 0000:04:02.0: supports D1 D2
[    0.631797] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.632115] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    0.632236] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
[    0.632268] pci 0000:05:00.0: BAR 0 [mem 0x52000000-0x5200ffff]
[    0.632378] pci 0000:05:00.0: enabling Extended Tags
[    0.632568] pci 0000:05:00.0: supports D1 D2
[    0.632568] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.632747] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.632935] pci 0000:04:02.0: PCI bridge to [bus 05]
[    0.636996] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.637104] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.637209] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.637314] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.637418] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.637523] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.637628] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.637768] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    1.157520] Low-power S0 idle used by default for system suspend
[    1.167327] ACPI: EC: interrupt unblocked
[    1.167329] ACPI: EC: event unblocked
[    1.167355] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.167356] ACPI: EC: GPE=0x6e
[    1.167357] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    1.167359] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    1.168022] iommu: Default domain type: Translated
[    1.168022] iommu: DMA domain TLB invalidation policy: lazy mode
[    1.168142] SCSI subsystem initialized
[    1.168150] libata version 3.00 loaded.
[    1.168150] ACPI: bus type USB registered
[    1.168150] usbcore: registered new interface driver usbfs
[    1.168150] usbcore: registered new interface driver hub
[    1.168150] usbcore: registered new device driver usb
[    1.168150] EDAC MC: Ver: 3.0.0
[    1.171452] efivars: Registered efivars operations
[    1.171674] NetLabel: Initializing
[    1.171676] NetLabel:  domain hash size = 128
[    1.171677] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.171706] NetLabel:  unlabeled traffic allowed by default
[    1.171713] mctp: management component transport protocol core
[    1.171715] NET: Registered PF_MCTP protocol family
[    1.171725] PCI: Using ACPI for IRQ routing
[    1.265989] PCI: pci_cache_line_size set to 64 bytes
[    1.266903] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
[    1.267823] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    1.267825] e820: reserve RAM buffer [mem 0x38a23000-0x3bffffff]
[    1.267827] e820: reserve RAM buffer [mem 0x3bf08000-0x3bffffff]
[    1.267829] e820: reserve RAM buffer [mem 0x3f7b3000-0x3fffffff]
[    1.267830] e820: reserve RAM buffer [mem 0x43f00000-0x43ffffff]
[    1.267831] e820: reserve RAM buffer [mem 0x8afc00000-0x8afffffff]
[    1.268025] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.268025] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.268025] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.268025] vgaarb: loaded
[    1.268075] clocksource: Switched to clocksource tsc-early
[    1.268509] VFS: Disk quotas dquot_6.6.0
[    1.268521] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.268587] pnp: PnP ACPI init
[    1.269723] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.269725] system 00:01: [io  0x164e-0x164f] has been reserved
[    1.269938] system 00:02: [io  0x1854-0x1857] has been reserved
[    1.271271] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    1.271298] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    1.271300] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    1.271302] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    1.271304] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
[    1.271305] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.271307] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    1.271308] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.272819] system 00:04: [io  0x2000-0x20fe] has been reserved
[    1.274291] pnp: PnP ACPI: found 6 devices
[    1.279794] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.279920] NET: Registered PF_INET protocol family
[    1.280090] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.292209] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    1.292244] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.292424] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.292822] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.292921] TCP: Hash tables configured (established 262144 bind 65536)
[    1.293185] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    1.293268] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    1.293343] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    1.293420] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.293425] NET: Registered PF_XDP protocol family
[    1.293433] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 03-2c] add_size 1000
[    1.293442] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned
[    1.293446] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned
[    1.293449] pci 0000:00:07.0: bridge window [io  0x4000-0x4fff]: assigned
[    1.293451] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned
[    1.293799] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    1.293800] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    1.293802] pci 0000:00:1f.5: BAR 0 [mem 0x50400000-0x50400fff]: assigned
[    1.293826] pci 0000:00:06.0: PCI bridge to [bus 01]
[    1.293857] pci 0000:00:06.2: PCI bridge to [bus 02]
[    1.293865] pci 0000:00:06.2:   bridge window [mem 0x5e300000-0x5e3fffff]
[    1.293873] pci 0000:04:02.0: PCI bridge to [bus 05]
[    1.293880] pci 0000:04:02.0:   bridge window [mem 0x52000000-0x520fffff]
[    1.293892] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    1.293899] pci 0000:03:00.0:   bridge window [mem 0x52000000-0x520fffff]
[    1.293911] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    1.293913] pci 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
[    1.293915] pci 0000:00:07.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    1.293918] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    1.293922] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.293923] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.293925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.293926] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    1.293927] pci_bus 0000:00: resource 8 [mem 0x50400000-0xbfffffff window]
[    1.293928] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    1.293930] pci_bus 0000:02: resource 1 [mem 0x5e300000-0x5e3fffff]
[    1.293931] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    1.293932] pci_bus 0000:03: resource 1 [mem 0x52000000-0x5e1fffff]
[    1.293933] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref]
[    1.293935] pci_bus 0000:04: resource 1 [mem 0x52000000-0x520fffff]
[    1.293936] pci_bus 0000:05: resource 1 [mem 0x52000000-0x520fffff]
[    1.295803] PCI: CLS 64 bytes, default 64
[    1.295812] DMAR: Intel-IOMMU force enabled due to platform opt in
[    1.295819] DMAR: No ATSR found
[    1.295820] DMAR: No SATC found
[    1.295821] DMAR: IOMMU feature fl1gp_support inconsistent
[    1.295822] DMAR: IOMMU feature pgsel_inv inconsistent
[    1.295823] DMAR: IOMMU feature nwfs inconsistent
[    1.295824] DMAR: IOMMU feature dit inconsistent
[    1.295825] DMAR: IOMMU feature sc_support inconsistent
[    1.295826] DMAR: IOMMU feature dev_iotlb_support inconsistent
[    1.295827] DMAR: dmar0: Using Queued invalidation
[    1.295830] DMAR: dmar1: Using Queued invalidation
[    1.295838] Trying to unpack rootfs image as initramfs...
[    1.296028] pci 0000:00:02.0: Adding to iommu group 0
[    1.296068] pci 0000:00:00.0: Adding to iommu group 1
[    1.296077] pci 0000:00:04.0: Adding to iommu group 2
[    1.296113] pci 0000:00:06.0: Adding to iommu group 3
[    1.296146] pci 0000:00:06.2: Adding to iommu group 4
[    1.296155] pci 0000:00:07.0: Adding to iommu group 5
[    1.296164] pci 0000:00:08.0: Adding to iommu group 6
[    1.296173] pci 0000:00:0a.0: Adding to iommu group 7
[    1.296188] pci 0000:00:0d.0: Adding to iommu group 8
[    1.296197] pci 0000:00:0d.2: Adding to iommu group 8
[    1.296212] pci 0000:00:14.0: Adding to iommu group 9
[    1.296222] pci 0000:00:14.2: Adding to iommu group 9
[    1.296230] pci 0000:00:14.3: Adding to iommu group 10
[    1.296242] pci 0000:00:15.0: Adding to iommu group 11
[    1.296262] pci 0000:00:1f.0: Adding to iommu group 12
[    1.296271] pci 0000:00:1f.3: Adding to iommu group 12
[    1.296280] pci 0000:00:1f.4: Adding to iommu group 12
[    1.296289] pci 0000:00:1f.5: Adding to iommu group 12
[    1.296322] pci 0000:02:00.0: Adding to iommu group 13
[    1.296330] pci 0000:03:00.0: Adding to iommu group 14
[    1.296340] pci 0000:04:02.0: Adding to iommu group 15
[    1.296353] pci 0000:05:00.0: Adding to iommu group 16
[    1.296673] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.296674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.296675] software IO TLB: mapped [mem 0x000000002c967000-0x0000000030967000] (64MB)
[    1.296717] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    1.296778] clocksource: Switched to clocksource tsc
[    1.296805] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.316811] Initialise system trusted keyrings
[    1.316821] Key type blacklist registered
[    1.316867] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    1.316874] zbud: loaded
[    1.316982] fuse: init (API version 7.40)
[    1.317061] integrity: Platform Keyring initialized
[    1.317064] integrity: Machine keyring initialized
[    1.325126] Freeing initrd memory: 16380K
[    1.327516] Key type asymmetric registered
[    1.327519] Asymmetric key parser 'x509' registered
[    1.327536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.327585] io scheduler mq-deadline registered
[    1.327586] io scheduler kyber registered
[    1.327595] io scheduler bfq registered
[    1.328383] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[    1.328762] pcieport 0000:00:06.2: PME: Signaling with IRQ 123
[    1.328891] pcieport 0000:00:07.0: PME: Signaling with IRQ 124
[    1.328906] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    1.329462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.331647] ACPI: AC: AC Adapter [AC0] (on-line)
[    1.331685] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.331697] ACPI: button: Sleep Button [SLPB]
[    1.331716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.331725] ACPI: button: Power Button [PWRB]
[    1.331741] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input2
[    1.331751] ACPI: button: Lid Switch [LID1]
[    1.339506] thermal LNXTHERM:00: registered as thermal_zone0
[    1.339509] ACPI: thermal: Thermal Zone [ECTZ] (54 C)
[    1.348377] thermal LNXTHERM:01: registered as thermal_zone1
[    1.348382] ACPI: thermal: Thermal Zone [TZ00] (54 C)
[    1.348683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.353015] hpet_acpi_add: no address or irqs in _CRS
[    1.353049] Non-volatile memory driver v1.3
[    1.353050] Linux agpgart interface v0.103
[    1.353467] ACPI: bus type drm_connector registered
[    1.355794] usbcore: registered new interface driver usbserial_generic
[    1.355799] usbserial: USB Serial support registered for generic
[    1.355854] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.357108] rtc_cmos rtc_cmos: registered as rtc0
[    1.357321] rtc_cmos rtc_cmos: setting system clock to 2024-05-20T14:53:18 UTC (1716216798)
[    1.357345] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    1.359260] intel_pstate: Intel P-state driver initializing
[    1.363075] intel_pstate: HWP enabled
[    1.363709] ledtrig-cpu: registered to indicate activity on CPUs
[    1.364165] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    1.365607] fbcon: Deferring console take-over
[    1.365610] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    1.365670] hid: raw HID events driver (C) Jiri Kosina
[    1.365740] drop_monitor: Initializing network drop monitor service
[    1.365852] NET: Registered PF_INET6 protocol family
[    1.366066] ACPI: battery: Slot [BAT0] (battery present)
[    1.370946] Segment Routing with IPv6
[    1.370947] RPL Segment Routing with IPv6
[    1.370954] In-situ OAM (IOAM) with IPv6
[    1.370968] NET: Registered PF_PACKET protocol family
[    1.373146] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.374353] microcode: Current revision: 0x00000419
[    1.375596] unchecked MSR access error: WRMSR to 0xd10 (tried to write 0x000000000000ffff) at rIP: 0xffffffffaba8c9f8 (native_write_msr+0x8/0x30)
[    1.375634] Call Trace:
[    1.375636]  <TASK>
[    1.375638]  ? ex_handler_msr.isra.0.cold+0x5b/0x60
[    1.375640]  ? fixup_exception+0x2c3/0x3a0
[    1.375642]  ? gp_try_fixup_and_notify+0x1e/0xb0
[    1.375644]  ? exc_general_protection+0x104/0x400
[    1.375645]  ? security_kernfs_init_security+0x35/0x50
[    1.375648]  ? asm_exc_general_protection+0x26/0x30
[    1.375650]  ? native_write_msr+0x8/0x30
[    1.375652]  cat_wrmsr+0x49/0x70
[    1.375654]  resctrl_arch_online_cpu+0x353/0x3a0
[    1.375655]  ? __pfx_resctrl_arch_online_cpu+0x10/0x10
[    1.375656]  cpuhp_invoke_callback+0x11f/0x410
[    1.375658]  ? __pfx_smpboot_thread_fn+0x10/0x10
[    1.375660]  cpuhp_thread_fun+0xa2/0x150
[    1.375662]  smpboot_thread_fn+0xda/0x1d0
[    1.375664]  kthread+0xcf/0x100
[    1.375666]  ? __pfx_kthread+0x10/0x10
[    1.375667]  ret_from_fork+0x31/0x50
[    1.375669]  ? __pfx_kthread+0x10/0x10
[    1.375670]  ret_from_fork_asm+0x1a/0x30
[    1.375672]  </TASK>
[    1.376790] resctrl: L2 allocation detected
[    1.376806] IPI shorthand broadcast: enabled
[    1.378074] sched_clock: Marking stable (1361152460, 15632359)->(1402903977, -26119158)
[    1.378613] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    1.379729] registered taskstats version 1
[    1.382404] Loading compiled-in X.509 certificates
[    1.385786] Loaded X.509 cert 'Build time autogenerated kernel key: be4bbad69eed7dd060ec4b225d099c7ad90dc57b'
[    1.389855] zswap: loaded using pool zstd/zsmalloc
[    1.390317] Key type .fscrypt registered
[    1.390319] Key type fscrypt-provisioning registered
[    1.390899] integrity: Loading X.509 certificate: UEFI:db
[    1.390916] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.390917] integrity: Loading X.509 certificate: UEFI:db
[    1.390925] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.390925] integrity: Loading X.509 certificate: UEFI:db
[    1.393771] integrity: Loaded X.509 cert 'UNIWILL Tech BIOS 2019 Root CA: 815e876df90e5b8b41d2d56d0c39e0b6'
[    1.394840] PM:   Magic number: 8:321:890
[    1.394874] pci 0000:00:1f.3: hash matches
[    1.397632] RAS: Correctable Errors collector initialized.
[    1.404138] clk: Disabling unused clocks
[    1.404139] PM: genpd: Disabling unused power domains
[    1.409491] Freeing unused decrypted memory: 2028K
[    1.410103] Freeing unused kernel image (initmem) memory: 3408K
[    1.410104] Write protecting the kernel read-only data: 32768k
[    1.411101] Freeing unused kernel image (rodata/data gap) memory: 1060K
[    1.415713] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.415716] rodata_test: all tests were successful
[    1.415719] Run /init as init process
[    1.415720]   with arguments:
[    1.415721]     /init
[    1.415722]   with environment:
[    1.415722]     HOME=/
[    1.415722]     TERM=linux
[    1.449718] fbcon: Taking over console
[    1.454926] Console: switching to colour frame buffer device 160x50
[    1.540097] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    1.540118] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    1.541194] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    1.541565] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    1.541571] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    1.541576] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
[    1.541704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.541711] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.541714] usb usb1: Product: xHCI Host Controller
[    1.541717] usb usb1: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.541719] usb usb1: SerialNumber: 0000:00:0d.0
[    1.541934] hub 1-0:1.0: USB hub found
[    1.541959] hub 1-0:1.0: 1 port detected
[    1.542509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.542514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.542517] usb usb2: Product: xHCI Host Controller
[    1.542520] usb usb2: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.542522] usb usb2: SerialNumber: 0000:00:0d.0
[    1.542672] hub 2-0:1.0: USB hub found
[    1.542693] hub 2-0:1.0: 1 port detected
[    1.542995] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.543000] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.543955] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.543964] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.544094] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.545115] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[    1.545597] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.545603] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.545608] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.545739] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.545746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.545749] usb usb3: Product: xHCI Host Controller
[    1.545751] usb usb3: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.545765] usb usb3: SerialNumber: 0000:00:14.0
[    1.545959] hub 3-0:1.0: USB hub found
[    1.545998] hub 3-0:1.0: 12 ports detected
[    1.549223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.549230] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549233] usb usb4: Product: xHCI Host Controller
[    1.549235] usb usb4: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.549237] usb usb4: SerialNumber: 0000:00:14.0
[    1.549392] hub 4-0:1.0: USB hub found
[    1.549424] hub 4-0:1.0: 4 ports detected
[    1.550720] usb: port power management may be unreliable
[    1.551177] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.551187] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    1.552475] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    1.552960] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.552966] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    1.552970] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.553072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.553079] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.553082] usb usb5: Product: xHCI Host Controller
[    1.553085] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.553087] usb usb5: SerialNumber: 0000:05:00.0
[    1.553199] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    1.553277] hub 5-0:1.0: USB hub found
[    1.553289] nvme nvme0: pci function 0000:02:00.0
[    1.553296] hub 5-0:1.0: 2 ports detected
[    1.553520] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.553524] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.553527] usb usb6: Product: xHCI Host Controller
[    1.553529] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.553530] usb usb6: SerialNumber: 0000:05:00.0
[    1.553650] hub 6-0:1.0: USB hub found
[    1.553671] hub 6-0:1.0: 2 ports detected
[    1.566265] nvme nvme0: D3 entry latency set to 10 seconds
[    1.570587] nvme nvme0: 20/0/0 default/read/poll queues
[    1.574000]  nvme0n1: p1 p2 p3
[    1.587906] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.787335] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    1.799103] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.799438] Console: switching to colour dummy device 80x25
[    1.809003] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.856539] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.856796] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    1.858495] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.865545] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)
[    1.942577] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=23.11
[    1.942581] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.942582] usb 3-3: Product: USB2.1 Hub
[    1.942583] usb 3-3: Manufacturer: GenesysLogic
[    1.944068] hub 3-3:1.0: USB hub found
[    1.944454] hub 3-3:1.0: 2 ports detected
[    1.957336] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
[    1.957346] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.957347] usb 5-1: Product: USB2.1 Hub
[    1.957348] usb 5-1: Manufacturer: CalDigit, Inc.
[    1.958840] hub 5-1:1.0: USB hub found
[    1.959319] hub 5-1:1.0: 4 ports detected
[    2.062679] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
[    2.076222] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[    2.083416] usb 4-4: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=23.11
[    2.083422] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.083423] usb 4-4: Product: USB3.2 Hub
[    2.083424] usb 4-4: Manufacturer: GenesysLogic
[    2.085691] hub 4-4:1.0: USB hub found
[    2.086078] hub 4-4:1.0: 2 ports detected
[    2.098380] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
[    2.098408] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.098420] usb 6-1: Product: USB3.1 Gen2 Hub
[    2.098424] usb 6-1: Manufacturer: CalDigit, Inc.
[    2.100588] hub 6-1:1.0: USB hub found
[    2.101037] hub 6-1:1.0: 4 ports detected
[    2.202446] usb 3-10: new full-speed USB device number 3 using xhci_hcd
[    2.227786] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.20.0
[    2.227792] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
[    2.248792] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[    2.249854] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
[    2.249856] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
[    2.250380] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
[    2.251147] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[    2.265883] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
[    2.346120] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    2.346145] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.383992] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
[    2.384024] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.384037] usb 5-1.4: Product: USB2.1 Hub
[    2.384046] usb 5-1.4: Manufacturer: CalDigit, Inc.
[    2.386528] hub 5-1.4:1.0: USB hub found
[    2.386995] hub 5-1.4:1.0: 4 ports detected
[    2.445908] usb 3-3.2: new full-speed USB device number 4 using xhci_hcd
[    2.456400] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.479296] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
[    2.479328] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    2.479339] usb 6-1.1: Product: USB-C Pro Card Reader
[    2.479348] usb 6-1.1: Manufacturer: CalDigit
[    2.479356] usb 6-1.1: SerialNumber: 000000000006
[    2.493437] usb-storage 6-1.1:1.0: USB Mass Storage device detected
[    2.494250] scsi host0: usb-storage 6-1.1:1.0
[    2.494341] usbcore: registered new interface driver usb-storage
[    2.497296] usbcore: registered new interface driver uas
[    2.559700] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[    2.563887] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c24d, bcdDevice=80.01
[    2.563921] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.563933] usb 3-3.2: Product: Logitech G710 Keyboard
[    2.563942] usb 3-3.2: Manufacturer: Logitech
[    2.580690] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
[    2.580701] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.580705] usb 6-1.4: Product: USB3.1 Gen1 Hub
[    2.580707] usb 6-1.4: Manufacturer: CalDigit, Inc.
[    2.583857] hub 6-1.4:1.0: USB hub found
[    2.584157] hub 6-1.4:1.0: 4 ports detected
[    2.593273] usbcore: registered new interface driver usbhid
[    2.593280] usbhid: USB HID core driver
[    2.599218] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C24D.0001/input/input4
[    2.633027] usb 4-4.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.656877] hid-generic 0003:046D:C24D.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-3.2/input0
[    2.657514] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C24D.0002/input/input5
[    2.665524] usb 4-4.1: New USB device found, idVendor=0bda, idProduct=0316, bcdDevice= 2.04
[    2.665548] usb 4-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.665556] usb 4-4.1: Product: USB3.0-CRW
[    2.665563] usb 4-4.1: Manufacturer: Generic
[    2.665568] usb 4-4.1: SerialNumber: 20120501030900000
[    2.676856] usb-storage 4-4.1:1.0: USB Mass Storage device detected
[    2.677980] scsi host1: usb-storage 4-4.1:1.0
[    2.692597] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
[    2.713981] hid-generic 0003:046D:C24D.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-3.2/input1
[    3.036233] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
[    3.055609] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[    3.055630] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    3.055654] usb 6-1.4.4: Product: USB 10/100/1000 LAN
[    3.055660] usb 6-1.4.4: Manufacturer: Realtek
[    3.055664] usb 6-1.4.4: SerialNumber: 001001000
[    3.378826] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    3.382032] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.382675] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.518077] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
[    3.519579] sd 0:0:0:0: [sda] Media removed, stopped polling
[    3.520526] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.544226] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
[    3.544243] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    3.544251] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
[    3.544257] usb 5-1.4.1: Manufacturer: CalDigit Inc.
[    3.561025] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0003/input/input8
[    3.566217] fbcon: i915drmfb (fb0) is primary device
[    3.615757] hid-generic 0003:2188:4042.0003: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
[    3.709064] scsi 1:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 6
[    3.711992] sd 1:0:0:0: [sdb] Media removed, stopped polling
[    3.712858] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    4.898964] Console: switching to colour frame buffer device 160x50
[    5.056316] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    5.372262] EXT4-fs (nvme0n1p2): mounted filesystem 3d3927a4-190d-4e14-aae4-2b44c8b74da8 r/w with ordered data mode. Quota mode: none.
[    5.426337] systemd[1]: systemd 255.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    5.426346] systemd[1]: Detected architecture x86-64.
[    5.427242] systemd[1]: Hostname set to <pandora>.
[    5.956030] systemd[1]: bpf-lsm: LSM BPF program attached
[    6.093907] systemd[1]: Queued start job for default target Graphical Interface.
[    6.127212] systemd[1]: Created slice Virtual Machine and Container Slice.
[    6.127939] systemd[1]: Created slice Slice /system/dirmngr.
[    6.128271] systemd[1]: Created slice Slice /system/getty.
[    6.128573] systemd[1]: Created slice Slice /system/gpg-agent.
[    6.128867] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    6.129179] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    6.129447] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    6.129720] systemd[1]: Created slice Slice /system/keyboxd.
[    6.129965] systemd[1]: Created slice Slice /system/modprobe.
[    6.130238] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.130417] systemd[1]: Created slice User and Session Slice.
[    6.130504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.130576] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.130753] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.130821] systemd[1]: Expecting device /dev/disk/by-diskseq/1-part3...
[    6.130868] systemd[1]: Expecting device /dev/disk/by-uuid/3512-6C76...
[    6.130913] systemd[1]: Reached target Local Encrypted Volumes.
[    6.130960] systemd[1]: Reached target Login Prompts.
[    6.131003] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.131060] systemd[1]: Reached target Remote File Systems.
[    6.131100] systemd[1]: Reached target Slice Units.
[    6.131146] systemd[1]: Reached target System Time Set.
[    6.131196] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.131291] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.131434] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.132591] systemd[1]: Listening on Process Core Dump Socket.
[    6.132735] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.132828] systemd[1]: Listening on Journal Socket.
[    6.132884] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.133047] systemd[1]: Listening on udev Control Socket.
[    6.133127] systemd[1]: Listening on udev Kernel Socket.
[    6.134249] systemd[1]: Mounting Huge Pages File System...
[    6.135086] systemd[1]: Mounting POSIX Message Queue File System...
[    6.135856] systemd[1]: Mounting Kernel Debug File System...
[    6.136604] systemd[1]: Mounting Kernel Trace File System...
[    6.137435] systemd[1]: Starting Create List of Static Device Nodes...
[    6.138314] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.139394] systemd[1]: Starting Load Kernel Module configfs...
[    6.141335] systemd[1]: Starting Load Kernel Module dm_mod...
[    6.143109] systemd[1]: Starting Load Kernel Module drm...
[    6.144487] systemd[1]: Starting Load Kernel Module fuse...
[    6.146072] systemd[1]: Starting Load Kernel Module loop...
[    6.147105] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    6.149060] systemd[1]: Starting Journal Service...
[    6.151343] systemd[1]: Starting Load Kernel Modules...
[    6.152229] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.152922] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.154041] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.154872] systemd[1]: Starting Coldplug All udev Devices...
[    6.157017] systemd[1]: Mounted Huge Pages File System.
[    6.158012] systemd[1]: Mounted POSIX Message Queue File System.
[    6.159176] device-mapper: uevent: version 1.0.3
[    6.159236] loop: module loaded
[    6.159309] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    6.159323] systemd[1]: Mounted Kernel Debug File System.
[    6.160983] systemd[1]: Mounted Kernel Trace File System.
[    6.162213] systemd[1]: Finished Create List of Static Device Nodes.
[    6.163523] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.163654] systemd[1]: Finished Load Kernel Module configfs.
[    6.164726] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    6.164821] systemd[1]: Finished Load Kernel Module dm_mod.
[    6.165758] systemd-journald[421]: Collecting audit messages is disabled.
[    6.165833] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.165917] systemd[1]: Finished Load Kernel Module drm.
[    6.166869] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.166938] systemd[1]: Finished Load Kernel Module fuse.
[    6.167989] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    6.168089] systemd[1]: Finished Load Kernel Module loop.
[    6.168315] i2c_dev: i2c /dev entries driver
[    6.169909] systemd[1]: Mounting FUSE Control File System...
[    6.171757] systemd[1]: Mounting Kernel Configuration File System...
[    6.172742] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    6.173609] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    6.175994] systemd[1]: Mounted FUSE Control File System.
[    6.177595] systemd[1]: Mounted Kernel Configuration File System.
[    6.196308] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[    6.198351] systemd[1]: Started Journal Service.
[    6.200646] cryptd: max_cpu_qlen set to 1000
[    6.208978] AVX2 version of gcm_enc/dec engaged.
[    6.209162] AES CTR mode by8 optimization enabled
[    6.216159] EXT4-fs (nvme0n1p2): re-mounted 3d3927a4-190d-4e14-aae4-2b44c8b74da8 r/w. Quota mode: none.
[    6.228101] systemd-journald[421]: Received client request to flush runtime journal.
[    6.252616] systemd-journald[421]: /var/log/journal/4af3a1e8e01745ddbaff38b21f2c52c6/system.journal: Journal file uses a different sequence number ID, rotating.
[    6.252620] systemd-journald[421]: Rotating system journal.
[    6.341410] Key type encrypted registered
[    6.346155] mc: Linux media interface: v0.10
[    6.357455] input: Intel HID events as /devices/platform/INTC1070:00/input/input9
[    6.358510] intel-hid INTC1070:00: failed to enable HID power button
[    6.377389] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[    6.377399] caller igen6_probe+0x15e/0x7c0 [igen6_edac] mapping multiple BARs
[    6.378507] videodev: Linux video capture interface: v2.00
[    6.379737] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
[    6.384896] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
[    6.384925] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
[    6.384927] EDAC igen6 MC0: ADDR 0x7fffffffe0 
[    6.384936] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
[    6.384938] EDAC igen6 MC1: ADDR 0x7fffffffe0 
[    6.385006] EDAC igen6: v2.5.1
[    6.411989] intel_pmc_core INT33A1:00:  initialized
[    6.413222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.414601] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.440226] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    6.440575] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    6.440673] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    6.441449] ACPI: bus type thunderbolt registered
[    6.441780] thunderbolt 0000:00:0d.2: total paths: 12
[    6.441788] thunderbolt 0000:00:0d.2: IOMMU DMA protection is enabled
[    6.442339] asus_wmi: ASUS WMI generic driver loaded
[    6.442890] thunderbolt 0000:00:0d.2: allocating TX ring 0 of size 10
[    6.442921] thunderbolt 0000:00:0d.2: allocating RX ring 0 of size 10
[    6.442939] thunderbolt 0000:00:0d.2: control channel created
[    6.442943] thunderbolt 0000:00:0d.2: using software connection manager
[    6.445995] Creating 1 MTD partitions on "0000:00:1f.5":
[    6.446001] 0x000000000000-0x000002000000 : "BIOS"
[    6.451159] i2c i2c-15: Successfully instantiated SPD at 0x50
[    6.455029] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    6.455559] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    6.463925] Adding 11546620k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:11546620k SS
[    6.466235] thunderbolt 0000:00:0d.2: created link from 0000:00:0d.0
[    6.486624] iTCO_vendor_support: vendor-support=0
[    6.497661] thunderbolt 0000:00:0d.2: created link from 0000:00:0d.0
[    6.497855] thunderbolt 0000:00:0d.2: created link from 0000:00:07.0
[    6.501553] thunderbolt 0000:00:0d.2: NHI initialized, starting thunderbolt
[    6.501557] thunderbolt 0000:00:0d.2: control channel starting...
[    6.501559] thunderbolt 0000:00:0d.2: starting TX ring 0
[    6.501563] thunderbolt 0000:00:0d.2: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[    6.501566] thunderbolt 0000:00:0d.2: starting RX ring 0
[    6.501568] thunderbolt 0000:00:0d.2: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[    6.501572] thunderbolt 0000:00:0d.2: security level set to user
[    6.502011] thunderbolt 0000:00:0d.2: current switch config:
[    6.502013] thunderbolt 0000:00:0d.2:  USB4 Switch: 8087:463e (Revision: 2, TB Version: 32)
[    6.502015] thunderbolt 0000:00:0d.2:   Max Port Number: 13
[    6.502017] thunderbolt 0000:00:0d.2:   Config:
[    6.502018] thunderbolt 0000:00:0d.2:    Upstream Port Number: 7 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[    6.502020] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
[    6.510343] thunderbolt 0000:00:0d.2: initializing Switch at 0x0 (depth: 0, up port: 7)
[    6.510607] asus_wmi: ASUS Management GUID not found
[    6.510650] Bluetooth: Core ver 2.22
[    6.510680] NET: Registered PF_BLUETOOTH protocol family
[    6.510682] Bluetooth: HCI device and connection manager initialized
[    6.510687] Bluetooth: HCI socket layer initialized
[    6.510689] Bluetooth: L2CAP socket layer initialized
[    6.510693] Bluetooth: SCO socket layer initialized
[    6.512060] thunderbolt 0000:00:0d.2: 0: credit allocation parameters:
[    6.512066] thunderbolt 0000:00:0d.2: 0:  USB3: 32
[    6.512068] thunderbolt 0000:00:0d.2: 0:  DP AUX: 1
[    6.512071] thunderbolt 0000:00:0d.2: 0:  DP main: 0
[    6.512073] thunderbolt 0000:00:0d.2: 0:  PCIe: 64
[    6.512074] thunderbolt 0000:00:0d.2: 0:  DMA: 14
[    6.517379] thunderbolt 0000:00:0d.2: 0: DROM version: 3
[    6.517642] thunderbolt 0000:00:0d.2: 0: uid: 0xeeeed3e080874857
[    6.520072] thunderbolt 0000:00:0d.2:  Port 1: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.520076] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.520077] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.520078] thunderbolt 0000:00:0d.2:   NFC Credits: 0x47800000
[    6.520080] thunderbolt 0000:00:0d.2:   Credits (total/control): 120/2
[    6.522599] thunderbolt 0000:00:0d.2:  Port 2: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.522602] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.522604] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.522605] thunderbolt 0000:00:0d.2:   NFC Credits: 0x80000000
[    6.522606] thunderbolt 0000:00:0d.2:   Credits (total/control): 0/2
[    6.524455] thunderbolt 0000:00:0d.2:  Port 3: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.524457] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.524459] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.524460] thunderbolt 0000:00:0d.2:   NFC Credits: 0x83c00000
[    6.524461] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    6.526989] thunderbolt 0000:00:0d.2:  Port 4: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.526992] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.526993] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.526995] thunderbolt 0000:00:0d.2:   NFC Credits: 0x83c00000
[    6.526996] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    6.527258] thunderbolt 0000:00:0d.2:  Port 5: 8087:15ea (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[    6.527262] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    6.527264] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.527265] thunderbolt 0000:00:0d.2:   NFC Credits: 0x100000c
[    6.527267] thunderbolt 0000:00:0d.2:   Credits (total/control): 16/0
[    6.527526] thunderbolt 0000:00:0d.2:  Port 6: 8087:15ea (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[    6.527530] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    6.527532] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.527534] thunderbolt 0000:00:0d.2:   NFC Credits: 0x100000c
[    6.527536] thunderbolt 0000:00:0d.2:   Credits (total/control): 16/0
[    6.528865] thunderbolt 0000:00:0d.2:  Port 7: 8086:15ea (Revision: 0, TB Version: 1, Type: NHI (0x2))
[    6.528869] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 11/11
[    6.528871] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.528873] thunderbolt 0000:00:0d.2:   NFC Credits: 0x1c00000
[    6.528875] thunderbolt 0000:00:0d.2:   Credits (total/control): 28/0
[    6.529658] thunderbolt 0000:00:0d.2:  Port 8: 8087:15ea (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[    6.529663] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.529666] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.529668] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.529671] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.529924] thunderbolt 0000:00:0d.2:  Port 9: 8087:15ea (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[    6.529928] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.529931] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.529933] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.529936] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.530058] thunderbolt 0000:00:0d.2:  Port 10: not implemented
[    6.530191] thunderbolt 0000:00:0d.2:  Port 11: not implemented
[    6.530998] thunderbolt 0000:00:0d.2:  Port 12: 8087:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[    6.531003] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.531005] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.531007] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.531009] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.531264] thunderbolt 0000:00:0d.2:  Port 13: 8087:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[    6.531268] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.531270] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.531272] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.531274] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.531277] thunderbolt 0000:00:0d.2: 0: running quirk_usb3_maximum_bandwidth [thunderbolt]
[    6.531336] thunderbolt 0000:00:0d.2: 0:12: USB3 maximum bandwidth limited to 16376 Mb/s
[    6.531340] thunderbolt 0000:00:0d.2: 0:13: USB3 maximum bandwidth limited to 16376 Mb/s
[    6.531343] thunderbolt 0000:00:0d.2: 0: linked ports 1 <-> 2
[    6.531346] thunderbolt 0000:00:0d.2: 0: linked ports 3 <-> 4
[    6.537690] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.537855] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.537983] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.538161] ee1004 15-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    6.538442] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.538445] cfg80211: failed to load regulatory.db
[    6.540805] thunderbolt 0000:00:0d.2: 0: TMU: supports uni-directional mode
[    6.540915] thunderbolt 0000:00:0d.2: 0: TMU: current mode: off
[    6.545193] thunderbolt 0000:00:0d.2: 0: TMU: mode change off -> uni-directional, LowRes requested
[    6.545661] thunderbolt 0000:00:0d.2: 0: TMU: mode set to: uni-directional, LowRes
[    6.546569] thunderbolt 0000:00:0d.2: 0:1: is connected, link is up (state: 2)
[    6.547966] thunderbolt 0000:00:0d.2: 0:1: reading NVM authentication status of retimers
[    6.637293] input: UNIW0001:00 093A:0274 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input10
[    6.637527] input: UNIW0001:00 093A:0274 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input11
[    6.637794] hid-generic 0018:093A:0274.0004: input,hidraw3: I2C HID v1.00 Mouse [UNIW0001:00 093A:0274] on i2c-UNIW0001:00
[    6.648825] usbcore: registered new device driver r8152-cfgselector
[    6.649864] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    6.650081] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.651912] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.651916] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.651917] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.651918] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.651919] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.651974] intel_rapl_msr: PL4 support detected.
[    6.652409] intel_rapl_common: Found RAPL domain package
[    6.652413] intel_rapl_common: Found RAPL domain core
[    6.652415] intel_rapl_common: Found RAPL domain uncore
[    6.652417] intel_rapl_common: Found RAPL domain psys
[    6.663446] Intel(R) Wireless WiFi driver for Linux
[    6.663986] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    6.668489] iwlwifi 0000:00:14.3: Detected crf-id 0x1300504, cnv-id 0x80400 wfpm id 0x80000030
[    6.668545] iwlwifi 0000:00:14.3: PCI dev 51f0/0074, rev=0x370, rfid=0x10a100
[    6.675150] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
[    6.675447] intel_rapl_common: Found RAPL domain package
[    6.676700] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.42
[    6.677050] iwlwifi 0000:00:14.3: loaded firmware version 89.e9cec78e.0 so-a0-hr-b0-89.ucode op_mode iwlmvm
[    6.678418] proc_thermal_pci 0000:00:04.0: error: proc_thermal_add, will continue
[    6.679985] Consider using thermal netlink events interface
[    6.683509] pps_core: LinuxPPS API ver. 1 registered
[    6.683513] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    6.688142] PTP clock support registered
[    6.704202] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    6.704406] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.704747] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.734008] input: UNIW0001:00 093A:0274 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input12
[    6.734223] input: UNIW0001:00 093A:0274 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input13
[    6.734281] hid-multitouch 0018:093A:0274.0004: input,hidraw3: I2C HID v1.00 Mouse [UNIW0001:00 093A:0274] on i2c-UNIW0001:00
[    6.736083] r8152-cfgselector 6-1.4.4: reset SuperSpeed USB device number 5 using xhci_hcd
[    6.773224] r8152 6-1.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
[    6.786048] usbcore: registered new interface driver btusb
[    6.788155] Bluetooth: hci0: Device revision is 2
[    6.788161] Bluetooth: hci0: Secure boot is enabled
[    6.788163] Bluetooth: hci0: OTP lock is enabled
[    6.788164] Bluetooth: hci0: API lock is enabled
[    6.788166] Bluetooth: hci0: Debug lock is disabled
[    6.788167] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.788169] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[    6.788247] ACPI Warning: \_SB.PC00.XHCI.RHUB.HS10._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20230628/nsarguments-61)
[    6.788333] Bluetooth: hci0: DSM reset method type: 0x00
[    6.792713] mousedev: PS/2 mouse device common for all mice
[    6.793686] Bluetooth: hci0: Found device firmware: intel/ibt-0040-4150.sfi
[    6.793707] Bluetooth: hci0: Boot Address: 0x100800
[    6.793710] Bluetooth: hci0: Firmware Version: 46-14.24
[    6.815742] r8152 6-1.4.4:1.0 eth0: v1.12.13
[    6.815790] usbcore: registered new interface driver r8152
[    6.822538] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.822546] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.822549] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.822552] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    6.822554] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    6.822555] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    6.822557] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    6.841011] usbcore: registered new interface driver cdc_ether
[    6.845479] usbcore: registered new interface driver r8153_ecm
[    6.848534] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x370
[    6.848591] thermal thermal_zone3: failed to read out thermal zone (-61)
[    6.858385] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    6.860970] intel_tcc_cooling: Programmable TCC Offset detected
[    6.922782] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14
[    6.922849] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input15
[    6.922889] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input16
[    6.922929] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input17
[    6.922969] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
[    6.923033] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input19
[    6.963134] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    6.963193] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    6.963254] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    6.963265] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    6.963391] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    6.964556] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    7.031049] iwlwifi 0000:00:14.3: base HW address: 7c:21:4a:40:58:49
[    7.051156] r8152 6-1.4.4:1.0 enp5s0u1u4u4: renamed from eth0
[    7.052814] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    7.162236] thunderbolt 0000:00:0d.2: 0:1: disabling sideband transactions
[    7.321368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.321374] Bluetooth: BNEP filters: protocol multicast
[    7.321378] Bluetooth: BNEP socket layer initialized
[    7.394815] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    7.494263] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    7.494321] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    7.494373] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    7.494432] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    7.495564] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    7.496285] typec port0: bound usb3-port2 (ops connector_ops)
[    7.496308] typec port0: bound usb2-port1 (ops connector_ops)
[    7.566748] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    7.652302] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    7.676093] usbcore: registered new interface driver snd-usb-audio
[    7.691357] thunderbolt 0-0:1.1: NVM version 7.0
[    7.691363] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
[    7.692415] thunderbolt 0000:00:0d.2: current switch config:
[    7.692418] thunderbolt 0000:00:0d.2:  Thunderbolt 3 Switch: 8086:15ef (Revision: 6, TB Version: 16)
[    7.692422] thunderbolt 0000:00:0d.2:   Max Port Number: 13
[    7.692424] thunderbolt 0000:00:0d.2:   Config:
[    7.692425] thunderbolt 0000:00:0d.2:    Upstream Port Number: 1 Depth: 1 Route String: 0x1 Enabled: 1, PlugEventsDelay: 254ms
[    7.692428] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
[    7.700953] thunderbolt 0000:00:0d.2: initializing Switch at 0x1 (depth: 1, up port: 1)
[    7.731529] thunderbolt 0000:00:0d.2: 1: reading DROM (length: 0x6d)
[    7.751570] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    7.751627] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    7.751688] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    7.751748] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    7.752959] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    8.338834] thunderbolt 0000:00:0d.2: 1: DROM version: 1
[    8.340158] thunderbolt 0000:00:0d.2: 1: uid: 0x3d600630c86400
[    8.343223] thunderbolt 0000:00:0d.2:  Port 1: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
[    8.343226] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    8.343228] thunderbolt 0000:00:0d.2:   Max counters: 16
[    8.343229] thunderbolt 0000:00:0d.2:   NFC Credits: 0x780000e
[    8.343231] thunderbolt 0000:00:0d.2:   Credits (total/control): 120/2
[    8.346836] thunderbolt 0000:00:0d.2:  Port 2: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
[    8.346840] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    8.346841] thunderbolt 0000:00:0d.2:   Max counters: 16
[    8.346842] thunderbolt 0000:00:0d.2:   NFC Credits: 0x0
[    8.346843] thunderbolt 0000:00:0d.2:   Credits (total/control): 0/2
[    8.346844] thunderbolt 0000:00:0d.2: 1:3: disabled by eeprom
[    8.346845] thunderbolt 0000:00:0d.2: 1:4: disabled by eeprom
[    8.346846] thunderbolt 0000:00:0d.2: 1:5: disabled by eeprom
[    8.346847] thunderbolt 0000:00:0d.2: 1:6: disabled by eeprom
[    8.346848] thunderbolt 0000:00:0d.2: 1:7: disabled by eeprom
[    8.347100] thunderbolt 0000:00:0d.2:  Port 8: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100102))
[    8.347102] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.347103] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.347104] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.347105] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.347365] thunderbolt 0000:00:0d.2:  Port 9: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    8.347367] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.347368] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.347369] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.347370] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.348426] thunderbolt 0000:00:0d.2:  Port 10: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    8.348428] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    8.348429] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.348429] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.348430] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.348959] thunderbolt 0000:00:0d.2:  Port 11: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    8.348962] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    8.348967] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.348969] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.348970] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.349777] thunderbolt 0000:00:0d.2:  Port 12: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
[    8.349780] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.349781] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.349782] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.349783] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.350047] thunderbolt 0000:00:0d.2:  Port 13: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
[    8.350049] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.350050] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.350051] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.350052] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.350312] thunderbolt 0000:00:0d.2: 1: current link speed 10.0 Gb/s
[    8.350314] thunderbolt 0000:00:0d.2: 1: current link width symmetric, dual lanes
[    8.352974] thunderbolt 0000:00:0d.2: 1: CLx: current mode: disabled
[    8.358198] thunderbolt 0000:00:0d.2: 1: TMU: supports uni-directional mode
[    8.358469] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
[    8.358503] thunderbolt 0-1: new device found, vendor=0x3d device=0x18
[    8.358505] thunderbolt 0-1: CalDigit, Inc. USB-C Pro Dock
[    8.361074] thunderbolt 0000:00:0d.2: 1: NVM version 43.0
[    8.362313] thunderbolt 0000:00:0d.2: 1: discovery, not touching CL states
[    8.362977] thunderbolt 0000:00:0d.2: 0:3: is unplugged (state: 7)
[    8.363921] thunderbolt 0000:00:0d.2: discovering Video path starting from 0:5
[    8.364055] thunderbolt 0000:00:0d.2: 0:5:  In HopID: 9 => Out port: 1 Out HopID: 11
[    8.364057] thunderbolt 0000:00:0d.2: 0:5:   Weight: 1 Priority: 1 Credits: 5 Drop: 0 PM: 0
[    8.364059] thunderbolt 0000:00:0d.2: 0:5:    Counter enabled: 0 Counter index: 0
[    8.364061] thunderbolt 0000:00:0d.2: 0:5:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.364062] thunderbolt 0000:00:0d.2: 0:5:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.364189] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 11 => Out port: 11 Out HopID: 9
[    8.364190] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 1 Credits: 26 Drop: 0 PM: 0
[    8.364192] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 0
[    8.364194] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.364195] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.364197] thunderbolt 0000:00:0d.2: path discovery complete
[    8.364454] thunderbolt 0000:00:0d.2: discovering AUX TX path starting from 0:5
[    8.365114] thunderbolt 0000:00:0d.2: 0:5:  In HopID: 8 => Out port: 1 Out HopID: 10
[    8.365115] thunderbolt 0000:00:0d.2: 0:5:   Weight: 1 Priority: 2 Credits: 4 Drop: 0 PM: 0
[    8.365117] thunderbolt 0000:00:0d.2: 0:5:    Counter enabled: 0 Counter index: 0
[    8.365118] thunderbolt 0000:00:0d.2: 0:5:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.365120] thunderbolt 0000:00:0d.2: 0:5:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.365247] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 10 => Out port: 11 Out HopID: 8
[    8.365248] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.365250] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 0
[    8.365251] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.365252] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.365254] thunderbolt 0000:00:0d.2: path discovery complete
[    8.365783] thunderbolt 0000:00:0d.2: discovering AUX RX path starting from 1:11
[    8.366480] thunderbolt 0000:00:0d.2: 1:11:  In HopID: 8 => Out port: 1 Out HopID: 10
[    8.366491] thunderbolt 0000:00:0d.2: 1:11:   Weight: 1 Priority: 2 Credits: 4 Drop: 0 PM: 0
[    8.366501] thunderbolt 0000:00:0d.2: 1:11:    Counter enabled: 0 Counter index: 0
[    8.366507] thunderbolt 0000:00:0d.2: 1:11:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.366509] thunderbolt 0000:00:0d.2: 1:11:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.366629] thunderbolt 0000:00:0d.2: 0:1:  In HopID: 10 => Out port: 5 Out HopID: 8
[    8.366631] thunderbolt 0000:00:0d.2: 0:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.366633] thunderbolt 0000:00:0d.2: 0:1:    Counter enabled: 0 Counter index: 0
[    8.366634] thunderbolt 0000:00:0d.2: 0:1:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.366636] thunderbolt 0000:00:0d.2: 0:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.366637] thunderbolt 0000:00:0d.2: path discovery complete
[    8.367029] thunderbolt 0000:00:0d.2: 0:5 <-> 1:11 (DP): DP IN maximum supported bandwidth 2700 Mb/s x4 = 8640 Mb/s
[    8.367159] thunderbolt 0000:00:0d.2: 0:5 <-> 1:11 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.367853] thunderbolt 0000:00:0d.2: 0:5 <-> 1:11 (DP): reduced bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.367856] thunderbolt 0000:00:0d.2: 0:5 <-> 1:11 (DP): discovered
[    8.368253] thunderbolt 0000:00:0d.2: discovering Video path starting from 0:6
[    8.368387] thunderbolt 0000:00:0d.2: 0:6:  In HopID: 9 => Out port: 1 Out HopID: 13
[    8.368389] thunderbolt 0000:00:0d.2: 0:6:   Weight: 1 Priority: 1 Credits: 5 Drop: 0 PM: 0
[    8.368391] thunderbolt 0000:00:0d.2: 0:6:    Counter enabled: 0 Counter index: 0
[    8.368392] thunderbolt 0000:00:0d.2: 0:6:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.368394] thunderbolt 0000:00:0d.2: 0:6:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.368520] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 13 => Out port: 10 Out HopID: 9
[    8.368522] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 1 Credits: 26 Drop: 0 PM: 0
[    8.368523] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 0
[    8.368525] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.368526] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.368528] thunderbolt 0000:00:0d.2: path discovery complete
[    8.369314] thunderbolt 0000:00:0d.2: discovering AUX TX path starting from 0:6
[    8.369448] thunderbolt 0000:00:0d.2: 0:6:  In HopID: 8 => Out port: 1 Out HopID: 12
[    8.369450] thunderbolt 0000:00:0d.2: 0:6:   Weight: 1 Priority: 2 Credits: 4 Drop: 0 PM: 0
[    8.369452] thunderbolt 0000:00:0d.2: 0:6:    Counter enabled: 0 Counter index: 0
[    8.369453] thunderbolt 0000:00:0d.2: 0:6:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.369455] thunderbolt 0000:00:0d.2: 0:6:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.369581] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 12 => Out port: 10 Out HopID: 8
[    8.369583] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.369585] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 0
[    8.369587] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.369588] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.369590] thunderbolt 0000:00:0d.2: path discovery complete
[    8.370718] thunderbolt 0000:00:0d.2: discovering AUX RX path starting from 1:10
[    8.370883] thunderbolt 0000:00:0d.2: 1:10:  In HopID: 8 => Out port: 1 Out HopID: 11
[    8.370888] thunderbolt 0000:00:0d.2: 1:10:   Weight: 1 Priority: 2 Credits: 4 Drop: 0 PM: 0
[    8.370891] thunderbolt 0000:00:0d.2: 1:10:    Counter enabled: 0 Counter index: 0
[    8.370893] thunderbolt 0000:00:0d.2: 1:10:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.370895] thunderbolt 0000:00:0d.2: 1:10:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.371092] thunderbolt 0000:00:0d.2: 0:1:  In HopID: 11 => Out port: 6 Out HopID: 8
[    8.371096] thunderbolt 0000:00:0d.2: 0:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.371099] thunderbolt 0000:00:0d.2: 0:1:    Counter enabled: 0 Counter index: 0
[    8.371101] thunderbolt 0000:00:0d.2: 0:1:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.371103] thunderbolt 0000:00:0d.2: 0:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.371105] thunderbolt 0000:00:0d.2: path discovery complete
[    8.371445] thunderbolt 0000:00:0d.2: 0:6 <-> 1:10 (DP): DP IN maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.372109] thunderbolt 0000:00:0d.2: 0:6 <-> 1:10 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.372243] thunderbolt 0000:00:0d.2: 0:6 <-> 1:10 (DP): reduced bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.372244] thunderbolt 0000:00:0d.2: 0:6 <-> 1:10 (DP): discovered
[    8.372837] thunderbolt 0000:00:0d.2: discovering PCIe Up path starting from 0:8
[    8.373560] thunderbolt 0000:00:0d.2: 0:8:  In HopID: 8 => Out port: 1 Out HopID: 8
[    8.373565] thunderbolt 0000:00:0d.2: 0:8:   Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[    8.373567] thunderbolt 0000:00:0d.2: 0:8:    Counter enabled: 0 Counter index: 0
[    8.373569] thunderbolt 0000:00:0d.2: 0:8:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.373571] thunderbolt 0000:00:0d.2: 0:8:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.373679] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 8 => Out port: 8 Out HopID: 8
[    8.373681] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 3 Credits: 24 Drop: 0 PM: 0
[    8.373683] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 0
[    8.373684] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.373686] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.373688] thunderbolt 0000:00:0d.2: path discovery complete
[    8.374204] thunderbolt 0000:00:0d.2: discovering PCIe Down path starting from 1:8
[    8.374899] thunderbolt 0000:00:0d.2: 1:8:  In HopID: 8 => Out port: 1 Out HopID: 8
[    8.374901] thunderbolt 0000:00:0d.2: 1:8:   Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[    8.374902] thunderbolt 0000:00:0d.2: 1:8:    Counter enabled: 0 Counter index: 0
[    8.374903] thunderbolt 0000:00:0d.2: 1:8:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.374905] thunderbolt 0000:00:0d.2: 1:8:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.375033] thunderbolt 0000:00:0d.2: 0:1:  In HopID: 8 => Out port: 8 Out HopID: 8
[    8.375034] thunderbolt 0000:00:0d.2: 0:1:   Weight: 1 Priority: 3 Credits: 24 Drop: 0 PM: 0
[    8.375035] thunderbolt 0000:00:0d.2: 0:1:    Counter enabled: 0 Counter index: 0
[    8.375037] thunderbolt 0000:00:0d.2: 0:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.375038] thunderbolt 0000:00:0d.2: 0:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.375039] thunderbolt 0000:00:0d.2: path discovery complete
[    8.375166] thunderbolt 0000:00:0d.2: 0:8 <-> 1:8 (PCI): discovered
[    8.376373] thunderbolt 0000:00:0d.2: 0:5: attached to bandwidth group 1
[    8.376505] thunderbolt 0000:00:0d.2: 0:6: attached to bandwidth group 1
[    8.376507] thunderbolt 0000:00:0d.2: 1:11: DP OUT resource available discovered
[    8.376508] thunderbolt 0000:00:0d.2: 1:10: DP OUT resource available discovered
[    8.377958] thunderbolt 0000:00:0d.2: 0:5: DP IN resource available
[    8.379354] thunderbolt 0000:00:0d.2: 0:6: DP IN resource available
[    8.418502] Bluetooth: hci0: Waiting for firmware download to complete
[    8.420059] Bluetooth: hci0: Firmware loaded in 1588251 usecs
[    8.420187] Bluetooth: hci0: Waiting for device to boot
[    8.435097] Bluetooth: hci0: Device booted in 14657 usecs
[    8.435174] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    8.435303] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0040-4150.ddc
[    8.438117] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.441183] Bluetooth: hci0: Firmware timestamp 2024.14 buildtype 1 build 81454
[    8.441187] Bluetooth: hci0: Firmware SHA1: 0xdfd62093
[    8.445141] Bluetooth: hci0: Fseq status: Success (0x00)
[    8.445145] Bluetooth: hci0: Fseq executed: 00.00.02.41
[    8.445146] Bluetooth: hci0: Fseq BT Top: 00.00.02.41
[    8.525756] Bluetooth: MGMT ver 1.22
[    8.530897] NET: Registered PF_ALG protocol family
[    9.467447] Bluetooth: RFCOMM TTY layer initialized
[    9.467454] Bluetooth: RFCOMM socket layer initialized
[    9.467457] Bluetooth: RFCOMM ver 1.11
[   10.229343] r8152 6-1.4.4:1.0 enp5s0u1u4u4: carrier on
[   39.239566] ACPI BIOS Error (bug): Could not resolve symbol [^^^^NPCF.ACBT], AE_NOT_FOUND (20230628/psargs-330)
[   39.239800] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0._Q83 due to previous error (AE_NOT_FOUND) (20230628/psparse-529)


[-- Attachment #3: dmesg_tb_dbg.txt --]
[-- Type: text/plain, Size: 131198 bytes --]

[    0.000000] Linux version 6.9.1-arch1-1 (linux@archlinux) (gcc (GCC) 14.1.1 20240507, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri, 17 May 2024 16:56:38 +0000
[    0.000000] Command line: initrd=\initramfs-linux.img root=LABEL=arch rw resume=swap thunderbolt.dyndbg=+p
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7b2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f7b3000-0x0000000042f55fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000042f56000-0x0000000043041fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000043042000-0x0000000043170fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000043171000-0x0000000043efefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000043eff000-0x0000000043efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000043f00000-0x0000000049ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004a200000-0x000000004a3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004b000000-0x00000000503fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008afbfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.8 by American Megatrends
[    0.000000] efi: ACPI=0x430cc000 ACPI 2.0=0x430cc014 SMBIOS=0x43c0f000 SMBIOS 3.0=0x43c0e000 MEMATTR=0x3b7ba018 ESRT=0x3bf08098 INITRD=0x38a09b98 RNG=0x42f85018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem73: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[    0.000000] efi: Not removing mem74: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem75: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem76: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem78: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem79: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.4.0 present.
[    0.000000] DMI: TUXEDO TUXEDO InfinityBook Pro Gen7 (MK1)/PHxARX1_PHxAQF1, BIOS N.1.05A07 11/07/2022
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.000000] tsc: Detected 2688.000 MHz TSC
[    0.000376] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000378] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000384] last_pfn = 0x8afc00 max_arch_pfn = 0x400000000
[    0.000387] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000390] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000761] last_pfn = 0x43f00 max_arch_pfn = 0x400000000
[    0.013111] esrt: Reserving ESRT space from 0x000000003bf08098 to 0x000000003bf08170.
[    0.013114] e820: update [mem 0x3bf08000-0x3bf08fff] usable ==> reserved
[    0.013124] Using GB pages for direct mapping
[    0.013125] Incomplete global flushes, disabling PCID
[    0.013233] Secure boot disabled
[    0.013233] RAMDISK: [mem 0x32aff000-0x33afdfff]
[    0.013260] ACPI: Early table checksum verification disabled
[    0.013262] ACPI: RSDP 0x00000000430CC014 000024 (v02 ALASKA)
[    0.013265] ACPI: XSDT 0x00000000430CB728 000104 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013268] ACPI: FACP 0x000000004303F000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[    0.013271] ACPI: DSDT 0x0000000042FC6000 078134 (v02 ALASKA A M I    01072009 INTL 20200717)
[    0.013273] ACPI: FACS 0x000000004316F000 000040
[    0.013275] ACPI: FIDT 0x0000000042FC5000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013277] ACPI: SSDT 0x0000000043041000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[    0.013279] ACPI: SSDT 0x0000000042FBF000 005D0B (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[    0.013281] ACPI: SSDT 0x0000000042FBC000 002AA1 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[    0.013283] ACPI: SSDT 0x0000000042FB8000 0033D3 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.013284] ACPI: SSDT 0x0000000042FAA000 00D337 (v02 INTEL  TcssSsdt 00001000 INTL 20200717)
[    0.013286] ACPI: HPET 0x0000000043040000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013288] ACPI: APIC 0x0000000042FA9000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[    0.013290] ACPI: MCFG 0x0000000042FA8000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013291] ACPI: SSDT 0x0000000042FA1000 00669F (v02 ALASKA AdlP_Rvp 00001000 INTL 20200717)
[    0.013293] ACPI: SSDT 0x0000000042F9F000 001E89 (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[    0.013295] ACPI: UEFI 0x00000000430B1000 000048 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013296] ACPI: NHLT 0x0000000042F9E000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.013298] ACPI: LPIT 0x0000000042F9D000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013300] ACPI: SSDT 0x0000000042F99000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[    0.013302] ACPI: SSDT 0x0000000042F96000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[    0.013304] ACPI: DBGP 0x0000000042F95000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013305] ACPI: DBG2 0x0000000042F94000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.013307] ACPI: SSDT 0x0000000042F92000 0014F5 (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[    0.013309] ACPI: DMAR 0x0000000042F91000 000088 (v02 INTEL  EDK2     00000002      01000013)
[    0.013311] ACPI: SSDT 0x0000000042F90000 000CAA (v02 INTEL  xh_adlLP 00000000 INTL 20200717)
[    0.013312] ACPI: SSDT 0x0000000042F8C000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[    0.013314] ACPI: SSDT 0x0000000042F89000 002B2A (v02 SocCmn SocCmn   00003000 INTL 20200717)
[    0.013316] ACPI: BGRT 0x0000000042F88000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013318] ACPI: PHAT 0x0000000042F87000 000611 (v00 ALASKA A M I    00000005 MSFT 0100000D)
[    0.013319] ACPI: WSMT 0x0000000042F9C000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013321] ACPI: FPDT 0x0000000042F86000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013323] ACPI: Reserving FACP table memory at [mem 0x4303f000-0x4303f113]
[    0.013324] ACPI: Reserving DSDT table memory at [mem 0x42fc6000-0x4303e133]
[    0.013324] ACPI: Reserving FACS table memory at [mem 0x4316f000-0x4316f03f]
[    0.013325] ACPI: Reserving FIDT table memory at [mem 0x42fc5000-0x42fc509b]
[    0.013325] ACPI: Reserving SSDT table memory at [mem 0x43041000-0x4304138b]
[    0.013326] ACPI: Reserving SSDT table memory at [mem 0x42fbf000-0x42fc4d0a]
[    0.013326] ACPI: Reserving SSDT table memory at [mem 0x42fbc000-0x42fbeaa0]
[    0.013327] ACPI: Reserving SSDT table memory at [mem 0x42fb8000-0x42fbb3d2]
[    0.013327] ACPI: Reserving SSDT table memory at [mem 0x42faa000-0x42fb7336]
[    0.013328] ACPI: Reserving HPET table memory at [mem 0x43040000-0x43040037]
[    0.013328] ACPI: Reserving APIC table memory at [mem 0x42fa9000-0x42fa91db]
[    0.013329] ACPI: Reserving MCFG table memory at [mem 0x42fa8000-0x42fa803b]
[    0.013329] ACPI: Reserving SSDT table memory at [mem 0x42fa1000-0x42fa769e]
[    0.013330] ACPI: Reserving SSDT table memory at [mem 0x42f9f000-0x42fa0e88]
[    0.013330] ACPI: Reserving UEFI table memory at [mem 0x430b1000-0x430b1047]
[    0.013331] ACPI: Reserving NHLT table memory at [mem 0x42f9e000-0x42f9e02c]
[    0.013331] ACPI: Reserving LPIT table memory at [mem 0x42f9d000-0x42f9d0cb]
[    0.013331] ACPI: Reserving SSDT table memory at [mem 0x42f99000-0x42f9ba82]
[    0.013332] ACPI: Reserving SSDT table memory at [mem 0x42f96000-0x42f98356]
[    0.013332] ACPI: Reserving DBGP table memory at [mem 0x42f95000-0x42f95033]
[    0.013333] ACPI: Reserving DBG2 table memory at [mem 0x42f94000-0x42f94053]
[    0.013333] ACPI: Reserving SSDT table memory at [mem 0x42f92000-0x42f934f4]
[    0.013334] ACPI: Reserving DMAR table memory at [mem 0x42f91000-0x42f91087]
[    0.013334] ACPI: Reserving SSDT table memory at [mem 0x42f90000-0x42f90ca9]
[    0.013335] ACPI: Reserving SSDT table memory at [mem 0x42f8c000-0x42f8fae9]
[    0.013335] ACPI: Reserving SSDT table memory at [mem 0x42f89000-0x42f8bb29]
[    0.013336] ACPI: Reserving BGRT table memory at [mem 0x42f88000-0x42f88037]
[    0.013336] ACPI: Reserving PHAT table memory at [mem 0x42f87000-0x42f87610]
[    0.013337] ACPI: Reserving WSMT table memory at [mem 0x42f9c000-0x42f9c027]
[    0.013337] ACPI: Reserving FPDT table memory at [mem 0x42f86000-0x42f86043]
[    0.013716] No NUMA configuration found
[    0.013716] Faking a node at [mem 0x0000000000000000-0x00000008afbfffff]
[    0.013718] NODE_DATA(0) allocated [mem 0x8afbfa000-0x8afbfefff]
[    0.013743] Zone ranges:
[    0.013744]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013745]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013746]   Normal   [mem 0x0000000100000000-0x00000008afbfffff]
[    0.013747]   Device   empty
[    0.013747] Movable zone start for each node
[    0.013748] Early memory node ranges
[    0.013748]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.013749]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.013749]   node   0: [mem 0x0000000000100000-0x000000003f7b2fff]
[    0.013750]   node   0: [mem 0x0000000043eff000-0x0000000043efffff]
[    0.013750]   node   0: [mem 0x0000000100000000-0x00000008afbfffff]
[    0.013753] Initmem setup node 0 [mem 0x0000000000001000-0x00000008afbfffff]
[    0.013755] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013756] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013772] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.014945] On node 0, zone DMA32: 18252 pages in unavailable ranges
[    0.049947] On node 0, zone Normal: 16640 pages in unavailable ranges
[    0.049954] On node 0, zone Normal: 1024 pages in unavailable ranges
[    0.049986] Reserving Intel graphics memory at [mem 0x4c800000-0x503fffff]
[    0.050886] ACPI: PM-Timer IO Port: 0x1808
[    0.050892] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.050894] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.050894] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.050894] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.050895] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.050895] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.050896] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.050896] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.050896] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.050897] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.050897] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.050897] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.050898] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.050898] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.050898] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.050899] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.050899] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.050900] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.050900] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.050900] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.050901] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.050901] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.050902] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.050902] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.050984] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.050986] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.050987] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.050989] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.050990] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.050995] e820: update [mem 0x38a23000-0x38a9efff] usable ==> reserved
[    0.051002] TSC deadline timer available
[    0.051004] CPU topo: Max. logical packages:   1
[    0.051004] CPU topo: Max. logical dies:       1
[    0.051005] CPU topo: Max. dies per package:   1
[    0.051006] CPU topo: Max. threads per core:   2
[    0.051007] CPU topo: Num. cores per package:    14
[    0.051007] CPU topo: Num. threads per package:  20
[    0.051008] CPU topo: Allowing 20 present CPUs plus 0 hotplug CPUs
[    0.051017] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.051018] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.051019] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.051020] PM: hibernation: Registered nosave memory: [mem 0x38a23000-0x38a9efff]
[    0.051021] PM: hibernation: Registered nosave memory: [mem 0x3bf08000-0x3bf08fff]
[    0.051022] PM: hibernation: Registered nosave memory: [mem 0x3f7b3000-0x42f55fff]
[    0.051022] PM: hibernation: Registered nosave memory: [mem 0x42f56000-0x43041fff]
[    0.051022] PM: hibernation: Registered nosave memory: [mem 0x43042000-0x43170fff]
[    0.051023] PM: hibernation: Registered nosave memory: [mem 0x43171000-0x43efefff]
[    0.051024] PM: hibernation: Registered nosave memory: [mem 0x43f00000-0x49ffffff]
[    0.051024] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff]
[    0.051024] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff]
[    0.051025] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff]
[    0.051025] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff]
[    0.051026] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfdffffff]
[    0.051026] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.051026] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.051027] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.051027] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.051027] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.051028] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[    0.051028] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.051028] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[    0.051029] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.051029] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.051030] [mem 0x50400000-0xfdffffff] available for PCI devices
[    0.051031] Booting paravirtualized kernel on bare hardware
[    0.051032] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.054966] setup_percpu: NR_CPUS:320 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
[    0.055819] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.055823] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.055824] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
[    0.055827] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 
[    0.055830] pcpu-alloc: [0] 16 17 18 19 
[    0.055839] Kernel command line: initrd=\initramfs-linux.img root=LABEL=arch rw resume=swap thunderbolt.dyndbg=+p
[    0.055874] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.055874] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.055875] printk: log_buf_len min size: 131072 bytes
[    0.056004] printk: log_buf_len: 262144 bytes
[    0.056005] printk: early log buf free: 115336(87%)
[    0.058085] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.059124] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.059259] Fallback order for Node 0: 0 
[    0.059262] Built 1 zonelists, mobility grouping on.  Total pages: 8189669
[    0.059263] Policy zone: Normal
[    0.059438] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.059445] software IO TLB: area num 32.
[    0.108297] Memory: 32419976K/33279304K available (18432K kernel code, 2164K rwdata, 13276K rodata, 3408K init, 3636K bss, 859068K reserved, 0K cma-reserved)
[    0.108453] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.108481] ftrace: allocating 49689 entries in 195 pages
[    0.112957] ftrace: allocated 195 pages with 4 groups
[    0.113008] Dynamic Preempt: full
[    0.113060] rcu: Preemptible hierarchical RCU implementation.
[    0.113061] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=20.
[    0.113061] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.113062] 	Trampoline variant of Tasks RCU enabled.
[    0.113063] 	Rude variant of Tasks RCU enabled.
[    0.113063] 	Tracing variant of Tasks RCU enabled.
[    0.113063] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.113064] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.113071] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.113073] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.113074] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.115452] NR_IRQS: 20736, nr_irqs: 2216, preallocated irqs: 16
[    0.115798] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.116238] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.116265] Console: colour dummy device 80x25
[    0.116267] printk: legacy console [tty0] enabled
[    0.116296] ACPI: Core revision 20230628
[    0.116531] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.116532] APIC: Switch to symmetric I/O mode setup
[    0.116533] DMAR: Host address width 39
[    0.116533] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.116537] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.116538] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.116542] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[    0.116544] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff
[    0.116546] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.116547] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.116547] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.120467] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.120469] x2apic enabled
[    0.120535] APIC: Switched APIC routing to: cluster x2apic
[    0.131818] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    0.131822] Calibrating delay loop (skipped), value calculated using timer frequency.. 5378.00 BogoMIPS (lpj=8960000)
[    0.131868] CPU0: Thermal monitoring enabled (TM1)
[    0.131870] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.131968] CET detected: Indirect Branch Tracking enabled
[    0.131969] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.131970] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.131971] process: using mwait in idle threads
[    0.131973] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.131974] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit
[    0.131974] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall
[    0.131975] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.131975] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.131976] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.131977] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.131977] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.131978] Register File Data Sampling: Vulnerable: No microcode
[    0.131984] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.131985] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.131986] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.131986] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.131987] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.131987] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.131988] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.131989] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
[    0.131989] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[    0.135154] Freeing SMP alternatives memory: 40K
[    0.135154] pid_max: default: 32768 minimum: 301
[    0.135154] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.135154] landlock: Up and running.
[    0.135154] Yama: becoming mindful.
[    0.135154] LSM support for eBPF active
[    0.135154] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.135154] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.135154] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-12700H (family: 0x6, model: 0x9a, stepping: 0x3)
[    0.135154] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.135154] core: cpu_core PMU driver: 
[    0.135154] ... version:                5
[    0.135154] ... bit width:              48
[    0.135154] ... generic registers:      8
[    0.135154] ... value mask:             0000ffffffffffff
[    0.135154] ... max period:             00007fffffffffff
[    0.135154] ... fixed-purpose events:   4
[    0.135154] ... event mask:             0001000f000000ff
[    0.135154] signal: max sigframe size: 3632
[    0.135154] Estimated ratio of average max frequency by base frequency (times 1024): 1668
[    0.135154] rcu: Hierarchical SRCU implementation.
[    0.135154] rcu: 	Max phase no-delay instances is 1000.
[    0.135154] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.135154] smp: Bringing up secondary CPUs ...
[    0.135154] smpboot: x86: Booting SMP configuration:
[    0.135154] .... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #13 #14 #15 #16 #17 #18 #19
[    0.018982] core: cpu_atom PMU driver: PEBS-via-PT 
[    0.018982] ... version:                5
[    0.018982] ... bit width:              48
[    0.018982] ... generic registers:      6
[    0.018982] ... value mask:             0000ffffffffffff
[    0.018982] ... max period:             00007fffffffffff
[    0.018982] ... fixed-purpose events:   3
[    0.018982] ... event mask:             000000070000003f
[    0.138587]   #1  #3  #5  #7  #9 #11
[    0.145227] smp: Brought up 1 node, 20 CPUs
[    0.145227] smpboot: Total of 20 processors activated (107563.00 BogoMIPS)
[    0.149376] devtmpfs: initialized
[    0.149376] x86/mm: Memory block size: 128MB
[    0.149771] ACPI: PM: Registering ACPI NVS region [mem 0x43042000-0x43170fff] (1241088 bytes)
[    0.149771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.149771] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.149771] pinctrl core: initialized pinctrl subsystem
[    0.149771] PM: RTC time: 14:48:36, date: 2024-05-20
[    0.149771] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.152173] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.152397] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.152651] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.152655] audit: initializing netlink subsys (disabled)
[    0.152658] audit: type=2000 audit(1716216516.019:1): state=initialized audit_enabled=0 res=1
[    0.152658] thermal_sys: Registered thermal governor 'fair_share'
[    0.152658] thermal_sys: Registered thermal governor 'bang_bang'
[    0.152658] thermal_sys: Registered thermal governor 'step_wise'
[    0.152658] thermal_sys: Registered thermal governor 'user_space'
[    0.152658] thermal_sys: Registered thermal governor 'power_allocator'
[    0.152658] cpuidle: using governor ladder
[    0.152658] cpuidle: using governor menu
[    0.152658] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152658] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
[    0.152658] PCI: not using ECAM ([mem 0xc0000000-0xcfffffff] not reserved)
[    0.152658] PCI: Using configuration type 1 for base access
[    0.152658] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.152658] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.152658] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.152658] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.152658] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.152658] Demotion targets for Node 0: null
[    0.152658] ACPI: Added _OSI(Module Device)
[    0.152658] ACPI: Added _OSI(Processor Device)
[    0.152658] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152658] ACPI: Added _OSI(Processor Aggregator Device)
[    0.236903] ACPI: 14 ACPI AML tables successfully acquired and loaded
[    0.253559] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[    0.253562] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[    0.255246] ACPI: Dynamic OEM Table Load:
[    0.255264] ACPI: SSDT 0xFFFF97F0017F5400 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20200717)
[    0.256538] ACPI: Dynamic OEM Table Load:
[    0.256543] ACPI: SSDT 0xFFFF97F0017EA000 000626 (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[    0.257732] ACPI: Dynamic OEM Table Load:
[    0.257736] ACPI: SSDT 0xFFFF97F002834A00 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[    0.258935] ACPI: Dynamic OEM Table Load:
[    0.258939] ACPI: SSDT 0xFFFF97F0017EE000 0004BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20200717)
[    0.260462] ACPI: Dynamic OEM Table Load:
[    0.260470] ACPI: SSDT 0xFFFF97F0017E4000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[    0.262495] ACPI: Dynamic OEM Table Load:
[    0.262501] ACPI: SSDT 0xFFFF97F0017E2000 001038 (v02 PmRef  ApHwp    00003000 INTL 20200717)
[    0.264140] ACPI: Dynamic OEM Table Load:
[    0.264146] ACPI: SSDT 0xFFFF97F0017E6000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[    0.265984] ACPI: Dynamic OEM Table Load:
[    0.265990] ACPI: SSDT 0xFFFF97F0017FE000 000FBB (v02 PmRef  ApCst    00003000 INTL 20200717)
[    0.274949] ACPI: _OSC evaluated successfully for all CPUs
[    0.275041] ACPI: EC: EC started
[    0.275042] ACPI: EC: interrupt blocked
[    0.276827] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.276830] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.276831] ACPI: Interpreter enabled
[    0.276879] ACPI: PM: (supports S0 S3 S4 S5)
[    0.276880] ACPI: Using IOAPIC for interrupt routing
[    0.278291] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
[    0.280202] PCI: ECAM [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.280213] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.280214] PCI: Using E820 reservations for host bridge windows
[    0.281659] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.282788] ACPI: \_SB_.PC00.PEG1.PXP_: New power resource
[    0.283522] ACPI: \_SB_.PC00.PEG2.PXP_: New power resource
[    0.286107] ACPI: \_SB_.PC00.PEG0.PXP_: New power resource
[    0.291010] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
[    0.299911] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource
[    0.311292] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.319799] ACPI: \_SB_.PC00.TBT0: New power resource
[    0.319885] ACPI: \_SB_.PC00.TBT1: New power resource
[    0.319965] ACPI: \_SB_.PC00.D3C_: New power resource
[    0.449158] ACPI: \_TZ_.FN00: New power resource
[    0.449216] ACPI: \_TZ_.FN01: New power resource
[    0.449273] ACPI: \_TZ_.FN02: New power resource
[    0.449328] ACPI: \_TZ_.FN03: New power resource
[    0.449387] ACPI: \_TZ_.FN04: New power resource
[    0.449913] ACPI: \PIN_: New power resource
[    0.450223] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[    0.450233] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.452222] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.456151] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.458636] PCI host bridge to bus 0000:00
[    0.458638] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.458640] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.458641] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.458643] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.458644] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window]
[    0.458646] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.458647] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.575919] pci 0000:00:00.0: [8086:4641] type 00 class 0x060000 conventional PCI endpoint
[    0.576123] pci 0000:00:02.0: [8086:46a6] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.576130] pci 0000:00:02.0: BAR 0 [mem 0x601c000000-0x601cffffff 64bit]
[    0.576135] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.576139] pci 0000:00:02.0: BAR 4 [io  0x3000-0x303f]
[    0.576153] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.576156] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.576177] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit]
[    0.576178] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs
[    0.576183] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref]
[    0.576184] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs
[    0.576325] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000 conventional PCI endpoint
[    0.576337] pci 0000:00:04.0: BAR 0 [mem 0x601d140000-0x601d15ffff 64bit]
[    0.576701] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400 PCIe Root Port
[    0.576747] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.576832] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.576883] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[    0.577601] pci 0000:00:06.2: [8086:463d] type 01 class 0x060400 PCIe Root Port
[    0.577644] pci 0000:00:06.2: PCI bridge to [bus 02]
[    0.577651] pci 0000:00:06.2:   bridge window [mem 0x5e300000-0x5e3fffff]
[    0.577741] pci 0000:00:06.2: PME# supported from D0 D3hot D3cold
[    0.577789] pci 0000:00:06.2: PTM enabled (root), 4ns granularity
[    0.578505] pci 0000:00:07.0: [8086:466e] type 01 class 0x060400 PCIe Root Port
[    0.578526] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    0.578531] pci 0000:00:07.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    0.578538] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    0.578564] pci 0000:00:07.0: Overriding RP PIO Log Size to 4
[    0.578653] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.578676] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
[    0.579748] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000 conventional PCI endpoint
[    0.579757] pci 0000:00:08.0: BAR 0 [mem 0x601d199000-0x601d199fff 64bit]
[    0.579851] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
[    0.579857] pci 0000:00:0a.0: BAR 0 [mem 0x601d180000-0x601d187fff 64bit]
[    0.579874] pci 0000:00:0a.0: enabling Extended Tags
[    0.579978] pci 0000:00:0d.0: [8086:461e] type 00 class 0x0c0330 conventional PCI endpoint
[    0.579988] pci 0000:00:0d.0: BAR 0 [mem 0x601d170000-0x601d17ffff 64bit]
[    0.580027] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.580604] pci 0000:00:0d.2: [8086:463e] type 00 class 0x0c0340 conventional PCI endpoint
[    0.580613] pci 0000:00:0d.2: BAR 0 [mem 0x601d100000-0x601d13ffff 64bit]
[    0.580620] pci 0000:00:0d.2: BAR 2 [mem 0x601d198000-0x601d198fff 64bit]
[    0.580649] pci 0000:00:0d.2: supports D1 D2
[    0.580650] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.580944] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330 conventional PCI endpoint
[    0.580968] pci 0000:00:14.0: BAR 0 [mem 0x601d160000-0x601d16ffff 64bit]
[    0.581066] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.581683] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000 conventional PCI endpoint
[    0.581711] pci 0000:00:14.2: BAR 0 [mem 0x601d190000-0x601d193fff 64bit]
[    0.581731] pci 0000:00:14.2: BAR 2 [mem 0x601d197000-0x601d197fff 64bit]
[    0.582018] pci 0000:00:14.3: [8086:51f0] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
[    0.582082] pci 0000:00:14.3: BAR 0 [mem 0x601d18c000-0x601d18ffff 64bit]
[    0.582228] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.583080] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000 conventional PCI endpoint
[    0.583812] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.587201] pci 0000:00:1f.0: [8086:5182] type 00 class 0x060100 conventional PCI endpoint
[    0.587606] pci 0000:00:1f.3: [8086:51c8] type 00 class 0x040380 conventional PCI endpoint
[    0.587666] pci 0000:00:1f.3: BAR 0 [mem 0x601d188000-0x601d18bfff 64bit]
[    0.587736] pci 0000:00:1f.3: BAR 4 [mem 0x601d000000-0x601d0fffff 64bit]
[    0.587896] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.588575] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.588620] pci 0000:00:1f.4: BAR 0 [mem 0x601d194000-0x601d1940ff 64bit]
[    0.588663] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.588982] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000 conventional PCI endpoint
[    0.589003] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.589244] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.590066] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802 PCIe Endpoint
[    0.590080] pci 0000:02:00.0: BAR 0 [mem 0x5e300000-0x5e303fff 64bit]
[    0.590311] pci 0000:00:06.2: PCI bridge to [bus 02]
[    0.590380] pci 0000:03:00.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.590433] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    0.590448] pci 0000:03:00.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.590484] pci 0000:03:00.0: enabling Extended Tags
[    0.590662] pci 0000:03:00.0: supports D1 D2
[    0.590663] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.590826] pci 0000:03:00.0: PTM enabled, 4ns granularity
[    0.590874] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.598504] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    0.598641] pci 0000:04:02.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.598699] pci 0000:04:02.0: PCI bridge to [bus 05]
[    0.598715] pci 0000:04:02.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.598755] pci 0000:04:02.0: enabling Extended Tags
[    0.598928] pci 0000:04:02.0: supports D1 D2
[    0.598929] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.599250] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    0.599371] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
[    0.599402] pci 0000:05:00.0: BAR 0 [mem 0x52000000-0x5200ffff]
[    0.599513] pci 0000:05:00.0: enabling Extended Tags
[    0.599703] pci 0000:05:00.0: supports D1 D2
[    0.599704] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.599884] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.600073] pci 0000:04:02.0: PCI bridge to [bus 05]
[    0.604070] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.604174] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.604276] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.604378] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.604480] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.604581] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.604682] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.604783] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    1.127903] Low-power S0 idle used by default for system suspend
[    1.137567] ACPI: EC: interrupt unblocked
[    1.137568] ACPI: EC: event unblocked
[    1.137595] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.137596] ACPI: EC: GPE=0x6e
[    1.137597] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    1.137598] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    1.138526] iommu: Default domain type: Translated
[    1.138526] iommu: DMA domain TLB invalidation policy: lazy mode
[    1.138649] SCSI subsystem initialized
[    1.138657] libata version 3.00 loaded.
[    1.138657] ACPI: bus type USB registered
[    1.138657] usbcore: registered new interface driver usbfs
[    1.138657] usbcore: registered new interface driver hub
[    1.138657] usbcore: registered new device driver usb
[    1.138657] EDAC MC: Ver: 3.0.0
[    1.141931] efivars: Registered efivars operations
[    1.142157] NetLabel: Initializing
[    1.142159] NetLabel:  domain hash size = 128
[    1.142161] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.142189] NetLabel:  unlabeled traffic allowed by default
[    1.142196] mctp: management component transport protocol core
[    1.142198] NET: Registered PF_MCTP protocol family
[    1.142203] PCI: Using ACPI for IRQ routing
[    1.236450] PCI: pci_cache_line_size set to 64 bytes
[    1.237361] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
[    1.238282] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    1.238283] e820: reserve RAM buffer [mem 0x38a23000-0x3bffffff]
[    1.238284] e820: reserve RAM buffer [mem 0x3bf08000-0x3bffffff]
[    1.238285] e820: reserve RAM buffer [mem 0x3f7b3000-0x3fffffff]
[    1.238286] e820: reserve RAM buffer [mem 0x43f00000-0x43ffffff]
[    1.238287] e820: reserve RAM buffer [mem 0x8afc00000-0x8afffffff]
[    1.238584] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.238584] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.238584] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.238584] vgaarb: loaded
[    1.238586] clocksource: Switched to clocksource tsc-early
[    1.239042] VFS: Disk quotas dquot_6.6.0
[    1.239054] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.239119] pnp: PnP ACPI init
[    1.240230] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.240232] system 00:01: [io  0x164e-0x164f] has been reserved
[    1.240352] system 00:02: [io  0x1854-0x1857] has been reserved
[    1.241424] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    1.241447] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    1.241449] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    1.241450] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    1.241452] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
[    1.241453] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.241454] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    1.241456] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.243049] system 00:04: [io  0x2000-0x20fe] has been reserved
[    1.244514] pnp: PnP ACPI: found 6 devices
[    1.250212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.250342] NET: Registered PF_INET protocol family
[    1.250540] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.262514] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    1.262554] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.262727] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.263101] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.263201] TCP: Hash tables configured (established 262144 bind 65536)
[    1.263310] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    1.263390] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    1.263463] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    1.263537] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.263543] NET: Registered PF_XDP protocol family
[    1.263549] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 03-2c] add_size 1000
[    1.263559] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned
[    1.263565] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned
[    1.263568] pci 0000:00:07.0: bridge window [io  0x4000-0x4fff]: assigned
[    1.263570] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned
[    1.263918] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    1.263920] resource: avoiding allocation from e820 entry [mem 0x000a0000-0x000fffff]
[    1.263921] pci 0000:00:1f.5: BAR 0 [mem 0x50400000-0x50400fff]: assigned
[    1.263946] pci 0000:00:06.0: PCI bridge to [bus 01]
[    1.263977] pci 0000:00:06.2: PCI bridge to [bus 02]
[    1.263985] pci 0000:00:06.2:   bridge window [mem 0x5e300000-0x5e3fffff]
[    1.263993] pci 0000:04:02.0: PCI bridge to [bus 05]
[    1.264000] pci 0000:04:02.0:   bridge window [mem 0x52000000-0x520fffff]
[    1.264013] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    1.264019] pci 0000:03:00.0:   bridge window [mem 0x52000000-0x520fffff]
[    1.264031] pci 0000:00:07.0: PCI bridge to [bus 03-2c]
[    1.264033] pci 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
[    1.264035] pci 0000:00:07.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    1.264037] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    1.264041] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.264043] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.264044] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.264045] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    1.264047] pci_bus 0000:00: resource 8 [mem 0x50400000-0xbfffffff window]
[    1.264048] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    1.264049] pci_bus 0000:02: resource 1 [mem 0x5e300000-0x5e3fffff]
[    1.264050] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    1.264052] pci_bus 0000:03: resource 1 [mem 0x52000000-0x5e1fffff]
[    1.264053] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref]
[    1.264054] pci_bus 0000:04: resource 1 [mem 0x52000000-0x520fffff]
[    1.264055] pci_bus 0000:05: resource 1 [mem 0x52000000-0x520fffff]
[    1.266083] PCI: CLS 64 bytes, default 64
[    1.266091] DMAR: Intel-IOMMU force enabled due to platform opt in
[    1.266098] DMAR: No ATSR found
[    1.266099] DMAR: No SATC found
[    1.266100] DMAR: IOMMU feature fl1gp_support inconsistent
[    1.266101] DMAR: IOMMU feature pgsel_inv inconsistent
[    1.266102] DMAR: IOMMU feature nwfs inconsistent
[    1.266102] DMAR: IOMMU feature dit inconsistent
[    1.266103] DMAR: IOMMU feature sc_support inconsistent
[    1.266104] DMAR: IOMMU feature dev_iotlb_support inconsistent
[    1.266105] DMAR: dmar0: Using Queued invalidation
[    1.266108] DMAR: dmar1: Using Queued invalidation
[    1.266164] Trying to unpack rootfs image as initramfs...
[    1.266347] pci 0000:00:02.0: Adding to iommu group 0
[    1.266399] pci 0000:00:00.0: Adding to iommu group 1
[    1.266408] pci 0000:00:04.0: Adding to iommu group 2
[    1.266443] pci 0000:00:06.0: Adding to iommu group 3
[    1.266476] pci 0000:00:06.2: Adding to iommu group 4
[    1.266485] pci 0000:00:07.0: Adding to iommu group 5
[    1.266492] pci 0000:00:08.0: Adding to iommu group 6
[    1.266500] pci 0000:00:0a.0: Adding to iommu group 7
[    1.266515] pci 0000:00:0d.0: Adding to iommu group 8
[    1.266523] pci 0000:00:0d.2: Adding to iommu group 8
[    1.266536] pci 0000:00:14.0: Adding to iommu group 9
[    1.266545] pci 0000:00:14.2: Adding to iommu group 9
[    1.266555] pci 0000:00:14.3: Adding to iommu group 10
[    1.266566] pci 0000:00:15.0: Adding to iommu group 11
[    1.266586] pci 0000:00:1f.0: Adding to iommu group 12
[    1.266594] pci 0000:00:1f.3: Adding to iommu group 12
[    1.266609] pci 0000:00:1f.4: Adding to iommu group 12
[    1.266617] pci 0000:00:1f.5: Adding to iommu group 12
[    1.266649] pci 0000:02:00.0: Adding to iommu group 13
[    1.266658] pci 0000:03:00.0: Adding to iommu group 14
[    1.266667] pci 0000:04:02.0: Adding to iommu group 15
[    1.266685] pci 0000:05:00.0: Adding to iommu group 16
[    1.266983] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.266984] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.266985] software IO TLB: mapped [mem 0x000000002c967000-0x0000000030967000] (64MB)
[    1.267021] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[    1.267098] clocksource: Switched to clocksource tsc
[    1.267126] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.283499] Initialise system trusted keyrings
[    1.283508] Key type blacklist registered
[    1.283612] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    1.283620] zbud: loaded
[    1.283764] fuse: init (API version 7.40)
[    1.283853] integrity: Platform Keyring initialized
[    1.283856] integrity: Machine keyring initialized
[    1.294563] Key type asymmetric registered
[    1.294565] Asymmetric key parser 'x509' registered
[    1.294582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.294666] io scheduler mq-deadline registered
[    1.294668] io scheduler kyber registered
[    1.294676] io scheduler bfq registered
[    1.296318] Freeing initrd memory: 16380K
[    1.296498] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[    1.296871] pcieport 0000:00:06.2: PME: Signaling with IRQ 123
[    1.297001] pcieport 0000:00:07.0: PME: Signaling with IRQ 124
[    1.297014] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    1.297580] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.300204] ACPI: AC: AC Adapter [AC0] (on-line)
[    1.300241] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.300253] ACPI: button: Sleep Button [SLPB]
[    1.300272] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.300281] ACPI: button: Power Button [PWRB]
[    1.300297] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input2
[    1.300307] ACPI: button: Lid Switch [LID1]
[    1.305826] thermal LNXTHERM:00: registered as thermal_zone0
[    1.305828] ACPI: thermal: Thermal Zone [ECTZ] (50 C)
[    1.311301] thermal LNXTHERM:01: registered as thermal_zone1
[    1.311304] ACPI: thermal: Thermal Zone [TZ00] (50 C)
[    1.311746] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.316141] hpet_acpi_add: no address or irqs in _CRS
[    1.316196] Non-volatile memory driver v1.3
[    1.316198] Linux agpgart interface v0.103
[    1.316577] ACPI: bus type drm_connector registered
[    1.318638] usbcore: registered new interface driver usbserial_generic
[    1.318642] usbserial: USB Serial support registered for generic
[    1.318692] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.320163] rtc_cmos rtc_cmos: registered as rtc0
[    1.320482] rtc_cmos rtc_cmos: setting system clock to 2024-05-20T14:48:37 UTC (1716216517)
[    1.320509] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    1.322006] intel_pstate: Intel P-state driver initializing
[    1.324714] intel_pstate: HWP enabled
[    1.325411] ledtrig-cpu: registered to indicate activity on CPUs
[    1.325731] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    1.327067] fbcon: Deferring console take-over
[    1.327069] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    1.327130] hid: raw HID events driver (C) Jiri Kosina
[    1.327200] drop_monitor: Initializing network drop monitor service
[    1.327275] NET: Registered PF_INET6 protocol family
[    1.332452] Segment Routing with IPv6
[    1.332455] RPL Segment Routing with IPv6
[    1.332469] In-situ OAM (IOAM) with IPv6
[    1.332499] NET: Registered PF_PACKET protocol family
[    1.334574] ACPI: battery: Slot [BAT0] (battery present)
[    1.335009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.336144] microcode: Current revision: 0x00000419
[    1.337271] unchecked MSR access error: WRMSR to 0xd10 (tried to write 0x000000000000ffff) at rIP: 0xffffffff82e8c9f8 (native_write_msr+0x8/0x30)
[    1.337310] Call Trace:
[    1.337320]  <TASK>
[    1.337322]  ? ex_handler_msr.isra.0.cold+0x5b/0x60
[    1.337324]  ? fixup_exception+0x2c3/0x3a0
[    1.337326]  ? gp_try_fixup_and_notify+0x1e/0xb0
[    1.337327]  ? exc_general_protection+0x104/0x400
[    1.337329]  ? security_kernfs_init_security+0x35/0x50
[    1.337331]  ? asm_exc_general_protection+0x26/0x30
[    1.337333]  ? native_write_msr+0x8/0x30
[    1.337335]  cat_wrmsr+0x49/0x70
[    1.337336]  resctrl_arch_online_cpu+0x353/0x3a0
[    1.337337]  ? __pfx_resctrl_arch_online_cpu+0x10/0x10
[    1.337338]  cpuhp_invoke_callback+0x11f/0x410
[    1.337340]  ? __pfx_smpboot_thread_fn+0x10/0x10
[    1.337342]  cpuhp_thread_fun+0xa2/0x150
[    1.337344]  smpboot_thread_fn+0xda/0x1d0
[    1.337346]  kthread+0xcf/0x100
[    1.337347]  ? __pfx_kthread+0x10/0x10
[    1.337348]  ret_from_fork+0x31/0x50
[    1.337350]  ? __pfx_kthread+0x10/0x10
[    1.337351]  ret_from_fork_asm+0x1a/0x30
[    1.337353]  </TASK>
[    1.338565] resctrl: L2 allocation detected
[    1.338587] IPI shorthand broadcast: enabled
[    1.339854] sched_clock: Marking stable (1323334086, 15649198)->(1364478794, -25495510)
[    1.340342] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    1.341405] registered taskstats version 1
[    1.344053] Loading compiled-in X.509 certificates
[    1.346800] Loaded X.509 cert 'Build time autogenerated kernel key: be4bbad69eed7dd060ec4b225d099c7ad90dc57b'
[    1.351349] zswap: loaded using pool zstd/zsmalloc
[    1.351695] Key type .fscrypt registered
[    1.351698] Key type fscrypt-provisioning registered
[    1.352178] integrity: Loading X.509 certificate: UEFI:db
[    1.352198] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.352199] integrity: Loading X.509 certificate: UEFI:db
[    1.352211] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.352211] integrity: Loading X.509 certificate: UEFI:db
[    1.356937] integrity: Loaded X.509 cert 'UNIWILL Tech BIOS 2019 Root CA: 815e876df90e5b8b41d2d56d0c39e0b6'
[    1.358771] PM:   Magic number: 8:768:839
[    1.358804] acpi OVTI01AS:00: hash matches
[    1.362546] RAS: Correctable Errors collector initialized.
[    1.371608] clk: Disabling unused clocks
[    1.371609] PM: genpd: Disabling unused power domains
[    1.376922] Freeing unused decrypted memory: 2028K
[    1.377534] Freeing unused kernel image (initmem) memory: 3408K
[    1.377535] Write protecting the kernel read-only data: 32768k
[    1.378507] Freeing unused kernel image (rodata/data gap) memory: 1060K
[    1.383157] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.383159] rodata_test: all tests were successful
[    1.383161] Run /init as init process
[    1.383162]   with arguments:
[    1.383162]     /init
[    1.383163]   with environment:
[    1.383163]     HOME=/
[    1.383164]     TERM=linux
[    1.414865] fbcon: Taking over console
[    1.420349] Console: switching to colour frame buffer device 160x50
[    1.498675] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.498680] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.500798] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.501012] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    1.501021] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    1.502082] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    1.502433] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    1.502438] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    1.502441] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
[    1.502598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.502606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.502610] usb usb1: Product: xHCI Host Controller
[    1.502612] usb usb1: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.502615] usb usb1: SerialNumber: 0000:00:0d.0
[    1.502763] hub 1-0:1.0: USB hub found
[    1.502783] hub 1-0:1.0: 1 port detected
[    1.503400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.503410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.503414] usb usb2: Product: xHCI Host Controller
[    1.503416] usb usb2: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.503418] usb usb2: SerialNumber: 0000:00:0d.0
[    1.503565] hub 2-0:1.0: USB hub found
[    1.503583] hub 2-0:1.0: 1 port detected
[    1.504931] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.504940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.506112] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[    1.506679] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.506685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.506689] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.506808] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.506813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.506816] usb usb3: Product: xHCI Host Controller
[    1.506818] usb usb3: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.506820] usb usb3: SerialNumber: 0000:00:14.0
[    1.507000] hub 3-0:1.0: USB hub found
[    1.507053] hub 3-0:1.0: 12 ports detected
[    1.509874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.509882] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.509885] usb usb4: Product: xHCI Host Controller
[    1.509888] usb usb4: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.509890] usb usb4: SerialNumber: 0000:00:14.0
[    1.510047] hub 4-0:1.0: USB hub found
[    1.510079] hub 4-0:1.0: 4 ports detected
[    1.511132] usb: port power management may be unreliable
[    1.511526] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.511534] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    1.512788] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    1.512865] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    1.512958] nvme nvme0: pci function 0000:02:00.0
[    1.513237] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.513240] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    1.513244] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.513346] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.513352] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.513355] usb usb5: Product: xHCI Host Controller
[    1.513357] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.513359] usb usb5: SerialNumber: 0000:05:00.0
[    1.513487] hub 5-0:1.0: USB hub found
[    1.513507] hub 5-0:1.0: 2 ports detected
[    1.513727] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.513731] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.513734] usb usb6: Product: xHCI Host Controller
[    1.513736] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    1.513738] usb usb6: SerialNumber: 0000:05:00.0
[    1.513856] hub 6-0:1.0: USB hub found
[    1.513873] hub 6-0:1.0: 2 ports detected
[    1.526176] nvme nvme0: D3 entry latency set to 10 seconds
[    1.530417] nvme nvme0: 20/0/0 default/read/poll queues
[    1.533324]  nvme0n1: p1 p2 p3
[    1.545615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.746060] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    1.759333] Console: switching to colour dummy device 80x25
[    1.765695] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.769036] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.819043] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.819267] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    1.820928] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.827686] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)
[    1.913031] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=23.11
[    1.913034] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.913034] usb 3-3: Product: USB2.1 Hub
[    1.913035] usb 3-3: Manufacturer: GenesysLogic
[    1.914011] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
[    1.914014] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.914015] usb 5-1: Product: USB2.1 Hub
[    1.914016] usb 5-1: Manufacturer: CalDigit, Inc.
[    1.914934] hub 3-3:1.0: USB hub found
[    1.915349] hub 3-3:1.0: 2 ports detected
[    1.915501] hub 5-1:1.0: USB hub found
[    1.915807] hub 5-1:1.0: 4 ports detected
[    2.032721] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[    2.032742] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
[    2.053858] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
[    2.053861] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.053862] usb 6-1: Product: USB3.1 Gen2 Hub
[    2.053863] usb 6-1: Manufacturer: CalDigit, Inc.
[    2.054081] usb 4-4: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=23.11
[    2.054083] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.054084] usb 4-4: Product: USB3.2 Hub
[    2.054084] usb 4-4: Manufacturer: GenesysLogic
[    2.055508] hub 6-1:1.0: USB hub found
[    2.055865] hub 4-4:1.0: USB hub found
[    2.055881] hub 6-1:1.0: 4 ports detected
[    2.056213] hub 4-4:1.0: 2 ports detected
[    2.172318] usb 3-10: new full-speed USB device number 3 using xhci_hcd
[    2.191435] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.20.0
[    2.191439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
[    2.212087] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[    2.213196] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
[    2.213199] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
[    2.213688] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
[    2.214488] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[    2.219210] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
[    2.316532] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    2.316553] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.337260] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
[    2.337282] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.337289] usb 5-1.4: Product: USB2.1 Hub
[    2.337294] usb 5-1.4: Manufacturer: CalDigit, Inc.
[    2.340244] hub 5-1.4:1.0: USB hub found
[    2.340707] hub 5-1.4:1.0: 4 ports detected
[    2.409925] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.415955] usb 3-3.2: new full-speed USB device number 4 using xhci_hcd
[    2.432707] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
[    2.432732] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    2.432740] usb 6-1.1: Product: USB-C Pro Card Reader
[    2.432746] usb 6-1.1: Manufacturer: CalDigit
[    2.432751] usb 6-1.1: SerialNumber: 000000000006
[    2.449922] usb-storage 6-1.1:1.0: USB Mass Storage device detected
[    2.450522] scsi host0: usb-storage 6-1.1:1.0
[    2.450639] usbcore: registered new interface driver usb-storage
[    2.456828] usbcore: registered new interface driver uas
[    2.516254] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[    2.537570] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c24d, bcdDevice=80.01
[    2.537594] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.537602] usb 3-3.2: Product: Logitech G710 Keyboard
[    2.537608] usb 3-3.2: Manufacturer: Logitech
[    2.538369] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
[    2.538380] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.538386] usb 6-1.4: Product: USB3.1 Gen1 Hub
[    2.538391] usb 6-1.4: Manufacturer: CalDigit, Inc.
[    2.542300] hub 6-1.4:1.0: USB hub found
[    2.542765] hub 6-1.4:1.0: 4 ports detected
[    2.567826] usbcore: registered new interface driver usbhid
[    2.567834] usbhid: USB HID core driver
[    2.575376] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C24D.0001/input/input4
[    2.609704] usb 4-4.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.630133] hid-generic 0003:046D:C24D.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-3.2/input0
[    2.630814] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C24D.0002/input/input5
[    2.641917] usb 4-4.1: New USB device found, idVendor=0bda, idProduct=0316, bcdDevice= 2.04
[    2.641942] usb 4-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.641950] usb 4-4.1: Product: USB3.0-CRW
[    2.641957] usb 4-4.1: Manufacturer: Generic
[    2.641962] usb 4-4.1: SerialNumber: 20120501030900000
[    2.645719] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
[    2.652697] usb-storage 4-4.1:1.0: USB Mass Storage device detected
[    2.654211] scsi host1: usb-storage 4-4.1:1.0
[    2.687022] hid-generic 0003:046D:C24D.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-3.2/input1
[    2.989513] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
[    3.008820] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[    3.008839] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    3.008844] usb 6-1.4.4: Product: USB 10/100/1000 LAN
[    3.008849] usb 6-1.4.4: Manufacturer: Realtek
[    3.008852] usb 6-1.4.4: SerialNumber: 001001000
[    3.325888] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    3.328689] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.329329] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.464756] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
[    3.466450] sd 0:0:0:0: [sda] Media removed, stopped polling
[    3.467471] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.497199] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
[    3.497214] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    3.497219] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
[    3.497222] usb 5-1.4.1: Manufacturer: CalDigit Inc.
[    3.509516] fbcon: i915drmfb (fb0) is primary device
[    3.513756] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0003/input/input8
[    3.569547] hid-generic 0003:2188:4042.0003: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
[    3.683028] scsi 1:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 6
[    3.686279] sd 1:0:0:0: [sdb] Media removed, stopped polling
[    3.687241] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    4.846365] Console: switching to colour frame buffer device 160x50
[    5.004575] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    5.317474] EXT4-fs (nvme0n1p2): mounted filesystem 3d3927a4-190d-4e14-aae4-2b44c8b74da8 r/w with ordered data mode. Quota mode: none.
[    5.373941] systemd[1]: systemd 255.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    5.373945] systemd[1]: Detected architecture x86-64.
[    5.374538] systemd[1]: Hostname set to <pandora>.
[    6.039381] systemd[1]: bpf-lsm: LSM BPF program attached
[    6.185024] systemd[1]: Queued start job for default target Graphical Interface.
[    6.265440] systemd[1]: Created slice Virtual Machine and Container Slice.
[    6.266989] systemd[1]: Created slice Slice /system/dirmngr.
[    6.267649] systemd[1]: Created slice Slice /system/getty.
[    6.268240] systemd[1]: Created slice Slice /system/gpg-agent.
[    6.268431] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    6.268568] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    6.268701] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    6.268841] systemd[1]: Created slice Slice /system/keyboxd.
[    6.268979] systemd[1]: Created slice Slice /system/modprobe.
[    6.269251] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.269367] systemd[1]: Created slice User and Session Slice.
[    6.269433] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.269496] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.269621] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.269680] systemd[1]: Expecting device /dev/disk/by-diskseq/1-part3...
[    6.269721] systemd[1]: Expecting device /dev/disk/by-uuid/3512-6C76...
[    6.269762] systemd[1]: Reached target Local Encrypted Volumes.
[    6.269803] systemd[1]: Reached target Login Prompts.
[    6.269842] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.269894] systemd[1]: Reached target Remote File Systems.
[    6.269935] systemd[1]: Reached target Slice Units.
[    6.269981] systemd[1]: Reached target System Time Set.
[    6.270027] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.270096] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.270210] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.270891] systemd[1]: Listening on Process Core Dump Socket.
[    6.270979] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.271053] systemd[1]: Listening on Journal Socket.
[    6.271110] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.271235] systemd[1]: Listening on udev Control Socket.
[    6.271301] systemd[1]: Listening on udev Kernel Socket.
[    6.272173] systemd[1]: Mounting Huge Pages File System...
[    6.272848] systemd[1]: Mounting POSIX Message Queue File System...
[    6.273560] systemd[1]: Mounting Kernel Debug File System...
[    6.274192] systemd[1]: Mounting Kernel Trace File System...
[    6.275178] systemd[1]: Starting Create List of Static Device Nodes...
[    6.276111] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.277116] systemd[1]: Starting Load Kernel Module configfs...
[    6.278981] systemd[1]: Starting Load Kernel Module dm_mod...
[    6.281246] systemd[1]: Starting Load Kernel Module drm...
[    6.282804] systemd[1]: Starting Load Kernel Module fuse...
[    6.284434] systemd[1]: Starting Load Kernel Module loop...
[    6.285496] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    6.288003] systemd[1]: Starting Journal Service...
[    6.290119] systemd[1]: Starting Load Kernel Modules...
[    6.291019] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.291718] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.292745] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.293580] systemd[1]: Starting Coldplug All udev Devices...
[    6.295955] systemd[1]: Mounted Huge Pages File System.
[    6.296154] device-mapper: uevent: version 1.0.3
[    6.296194] loop: module loaded
[    6.296283] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    6.297603] systemd[1]: Mounted POSIX Message Queue File System.
[    6.298870] systemd[1]: Mounted Kernel Debug File System.
[    6.300161] systemd[1]: Mounted Kernel Trace File System.
[    6.301484] systemd[1]: Finished Create List of Static Device Nodes.
[    6.302857] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.302977] systemd[1]: Finished Load Kernel Module configfs.
[    6.304175] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    6.304284] systemd[1]: Finished Load Kernel Module dm_mod.
[    6.305260] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.305337] systemd[1]: Finished Load Kernel Module drm.
[    6.306308] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.306378] systemd[1]: Finished Load Kernel Module fuse.
[    6.306727] systemd-journald[441]: Collecting audit messages is disabled.
[    6.307300] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    6.307369] systemd[1]: Finished Load Kernel Module loop.
[    6.307853] i2c_dev: i2c /dev entries driver
[    6.309206] systemd[1]: Mounting FUSE Control File System...
[    6.310724] systemd[1]: Mounting Kernel Configuration File System...
[    6.311850] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    6.312869] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    6.315227] systemd[1]: Mounted FUSE Control File System.
[    6.318239] systemd[1]: Mounted Kernel Configuration File System.
[    6.322943] EXT4-fs (nvme0n1p2): re-mounted 3d3927a4-190d-4e14-aae4-2b44c8b74da8 r/w. Quota mode: none.
[    6.323952] systemd[1]: Finished Remount Root and Kernel File Systems.
[    6.325747] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[    6.326540] systemd[1]: Starting Load/Save OS Random Seed...
[    6.327537] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.339287] systemd[1]: Started Journal Service.
[    6.342070] cryptd: max_cpu_qlen set to 1000
[    6.351924] AVX2 version of gcm_enc/dec engaged.
[    6.352048] AES CTR mode by8 optimization enabled
[    6.355889] systemd-journald[441]: Received client request to flush runtime journal.
[    6.374135] systemd-journald[441]: /var/log/journal/4af3a1e8e01745ddbaff38b21f2c52c6/system.journal: Journal file uses a different sequence number ID, rotating.
[    6.374138] systemd-journald[441]: Rotating system journal.
[    6.507542] Key type encrypted registered
[    6.509567] mc: Linux media interface: v0.10
[    6.519754] input: Intel HID events as /devices/platform/INTC1070:00/input/input9
[    6.519760] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[    6.519770] caller igen6_probe+0x15e/0x7c0 [igen6_edac] mapping multiple BARs
[    6.522601] intel-hid INTC1070:00: failed to enable HID power button
[    6.523044] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
[    6.526298] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
[    6.526333] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
[    6.526335] EDAC igen6 MC0: ADDR 0x7fffffffe0 
[    6.526783] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
[    6.526787] EDAC igen6 MC1: ADDR 0x7fffffffe0 
[    6.529895] EDAC igen6: v2.5.1
[    6.532106] videodev: Linux video capture interface: v2.00
[    6.558955] intel_pmc_core INT33A1:00:  initialized
[    6.599992] Adding 11546620k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:11546620k SS
[    6.621232] ACPI: bus type thunderbolt registered
[    6.621334] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.622374] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.625223] thunderbolt 0000:00:0d.2: total paths: 12
[    6.625245] thunderbolt 0000:00:0d.2: IOMMU DMA protection is enabled
[    6.627508] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    6.627842] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    6.627935] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    6.638702] i2c i2c-15: Successfully instantiated SPD at 0x50
[    6.646155] thunderbolt 0000:00:0d.2: allocating TX ring 0 of size 10
[    6.646196] thunderbolt 0000:00:0d.2: allocating RX ring 0 of size 10
[    6.646219] thunderbolt 0000:00:0d.2: control channel created
[    6.646224] thunderbolt 0000:00:0d.2: using software connection manager
[    6.649925] asus_wmi: ASUS WMI generic driver loaded
[    6.651090] Creating 1 MTD partitions on "0000:00:1f.5":
[    6.651095] 0x000000000000-0x000002000000 : "BIOS"
[    6.659027] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    6.659665] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    6.664634] thunderbolt 0000:00:0d.2: created link from 0000:00:0d.0
[    6.694238] thunderbolt 0000:00:0d.2: created link from 0000:00:0d.0
[    6.694372] thunderbolt 0000:00:0d.2: created link from 0000:00:07.0
[    6.696946] thunderbolt 0000:00:0d.2: NHI initialized, starting thunderbolt
[    6.696952] thunderbolt 0000:00:0d.2: control channel starting...
[    6.696955] thunderbolt 0000:00:0d.2: starting TX ring 0
[    6.696961] thunderbolt 0000:00:0d.2: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[    6.696965] thunderbolt 0000:00:0d.2: starting RX ring 0
[    6.696969] thunderbolt 0000:00:0d.2: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[    6.696976] thunderbolt 0000:00:0d.2: security level set to user
[    6.697254] thunderbolt 0000:00:0d.2: current switch config:
[    6.697259] thunderbolt 0000:00:0d.2:  USB4 Switch: 8087:463e (Revision: 2, TB Version: 32)
[    6.697264] thunderbolt 0000:00:0d.2:   Max Port Number: 13
[    6.697267] thunderbolt 0000:00:0d.2:   Config:
[    6.697268] thunderbolt 0000:00:0d.2:    Upstream Port Number: 7 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[    6.697272] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
[    6.704032] thunderbolt 0000:00:0d.2: initializing Switch at 0x0 (depth: 0, up port: 7)
[    6.705889] thunderbolt 0000:00:0d.2: 0: credit allocation parameters:
[    6.705893] thunderbolt 0000:00:0d.2: 0:  USB3: 32
[    6.705895] thunderbolt 0000:00:0d.2: 0:  DP AUX: 1
[    6.705898] thunderbolt 0000:00:0d.2: 0:  DP main: 0
[    6.705900] thunderbolt 0000:00:0d.2: 0:  PCIe: 64
[    6.705902] thunderbolt 0000:00:0d.2: 0:  DMA: 14
[    6.711626] thunderbolt 0000:00:0d.2: 0: DROM version: 3
[    6.712454] thunderbolt 0000:00:0d.2: 0: uid: 0x6cacd6008087a2d6
[    6.714503] thunderbolt 0000:00:0d.2:  Port 1: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.714510] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.714513] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.714516] thunderbolt 0000:00:0d.2:   NFC Credits: 0x47800000
[    6.714519] thunderbolt 0000:00:0d.2:   Credits (total/control): 120/2
[    6.717035] thunderbolt 0000:00:0d.2:  Port 2: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.717041] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.717044] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.717047] thunderbolt 0000:00:0d.2:   NFC Credits: 0x80000000
[    6.717050] thunderbolt 0000:00:0d.2:   Credits (total/control): 0/2
[    6.719437] thunderbolt 0000:00:0d.2:  Port 3: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.719442] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.719445] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.719448] thunderbolt 0000:00:0d.2:   NFC Credits: 0x83c00000
[    6.719451] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    6.721028] iTCO_vendor_support: vendor-support=0
[    6.721166] intel_rapl_msr: PL4 support detected.
[    6.721180] usbcore: registered new device driver r8152-cfgselector
[    6.721205] intel_rapl_common: Found RAPL domain package
[    6.721209] intel_rapl_common: Found RAPL domain core
[    6.721210] intel_rapl_common: Found RAPL domain uncore
[    6.721212] intel_rapl_common: Found RAPL domain psys
[    6.721220] asus_wmi: ASUS Management GUID not found
[    6.721445] thunderbolt 0000:00:0d.2:  Port 4: 8087:15ea (Revision: 0, TB Version: 1, Type: Port (0x1))
[    6.721453] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    6.721472] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.721476] thunderbolt 0000:00:0d.2:   NFC Credits: 0x83c00000
[    6.721479] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    6.722314] thunderbolt 0000:00:0d.2:  Port 5: 8087:15ea (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[    6.722388] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    6.722390] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.722391] thunderbolt 0000:00:0d.2:   NFC Credits: 0x100000c
[    6.722393] thunderbolt 0000:00:0d.2:   Credits (total/control): 16/0
[    6.722676] thunderbolt 0000:00:0d.2:  Port 6: 8087:15ea (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[    6.722684] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    6.722697] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.722700] thunderbolt 0000:00:0d.2:   NFC Credits: 0x100000c
[    6.722702] thunderbolt 0000:00:0d.2:   Credits (total/control): 16/0
[    6.723563] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.723764] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.723950] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.724027] thunderbolt 0000:00:0d.2:  Port 7: 8086:15ea (Revision: 0, TB Version: 1, Type: NHI (0x2))
[    6.724035] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 11/11
[    6.724038] thunderbolt 0000:00:0d.2:   Max counters: 16
[    6.724040] thunderbolt 0000:00:0d.2:   NFC Credits: 0x1c00000
[    6.724042] thunderbolt 0000:00:0d.2:   Credits (total/control): 28/0
[    6.724295] thunderbolt 0000:00:0d.2:  Port 8: 8087:15ea (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[    6.724303] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.724305] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.724307] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.724309] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.724520] ee1004 15-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    6.724910] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.724915] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.724917] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.724919] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.724920] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.725099] thunderbolt 0000:00:0d.2:  Port 9: 8087:15ea (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[    6.725104] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.725106] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.725108] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.725110] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.725232] thunderbolt 0000:00:0d.2:  Port 10: not implemented
[    6.725368] thunderbolt 0000:00:0d.2:  Port 11: not implemented
[    6.725632] thunderbolt 0000:00:0d.2:  Port 12: 8087:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[    6.725635] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.725637] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.725638] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.725639] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.726445] thunderbolt 0000:00:0d.2:  Port 13: 8087:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[    6.726459] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    6.726466] thunderbolt 0000:00:0d.2:   Max counters: 2
[    6.726473] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    6.726479] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    6.726482] thunderbolt 0000:00:0d.2: 0: running quirk_usb3_maximum_bandwidth [thunderbolt]
[    6.726529] thunderbolt 0000:00:0d.2: 0:12: USB3 maximum bandwidth limited to 16376 Mb/s
[    6.726531] thunderbolt 0000:00:0d.2: 0:13: USB3 maximum bandwidth limited to 16376 Mb/s
[    6.726533] thunderbolt 0000:00:0d.2: 0: linked ports 1 <-> 2
[    6.726535] thunderbolt 0000:00:0d.2: 0: linked ports 3 <-> 4
[    6.729001] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.729004] cfg80211: failed to load regulatory.db
[    6.735417] thunderbolt 0000:00:0d.2: 0: TMU: supports uni-directional mode
[    6.735550] thunderbolt 0000:00:0d.2: 0: TMU: current mode: off
[    6.738302] Bluetooth: Core ver 2.22
[    6.738316] NET: Registered PF_BLUETOOTH protocol family
[    6.738317] Bluetooth: HCI device and connection manager initialized
[    6.738320] Bluetooth: HCI socket layer initialized
[    6.738323] Bluetooth: L2CAP socket layer initialized
[    6.738325] Bluetooth: SCO socket layer initialized
[    6.739648] thunderbolt 0000:00:0d.2: 0: TMU: mode change off -> uni-directional, LowRes requested
[    6.740677] thunderbolt 0000:00:0d.2: 0: TMU: mode set to: uni-directional, LowRes
[    6.741068] thunderbolt 0000:00:0d.2: 0: resetting
[    6.743473] thunderbolt 0000:00:0d.2: acking hot unplug event on 0:1
[    6.767472] pcieport 0000:00:07.0: pciehp: Slot(3): Link Down
[    6.767475] pcieport 0000:00:07.0: pciehp: Slot(3): Card not present
[    6.767485] xhci_hcd 0000:05:00.0: remove, state 1
[    6.767494] usb usb6: USB disconnect, device number 1
[    6.767495] usb 6-1: USB disconnect, device number 2
[    6.767496] usb 6-1.1: USB disconnect, device number 3
[    6.792433] thunderbolt 0000:00:0d.2: 0:5: DP IN resource available
[    6.793826] thunderbolt 0000:00:0d.2: 0:6: DP IN resource available
[    6.793958] thunderbolt 0000:00:0d.2: 0:1: got unplug event for disconnected port, ignoring
[    6.832566] input: UNIW0001:00 093A:0274 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input10
[    6.832696] input: UNIW0001:00 093A:0274 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input11
[    6.832892] hid-generic 0018:093A:0274.0004: input,hidraw3: I2C HID v1.00 Mouse [UNIW0001:00 093A:0274] on i2c-UNIW0001:00
[    6.847494] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    6.847647] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.861711] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
[    6.861936] intel_rapl_common: Found RAPL domain package
[    6.865796] proc_thermal_pci 0000:00:04.0: error: proc_thermal_add, will continue
[    6.867010] Consider using thermal netlink events interface
[    6.870206] Intel(R) Wireless WiFi driver for Linux
[    6.870638] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    6.874324] iwlwifi 0000:00:14.3: Detected crf-id 0x1300504, cnv-id 0x80400 wfpm id 0x80000030
[    6.874385] iwlwifi 0000:00:14.3: PCI dev 51f0/0074, rev=0x370, rfid=0x10a100
[    6.880665] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.42
[    6.881102] iwlwifi 0000:00:14.3: loaded firmware version 89.e9cec78e.0 so-a0-hr-b0-89.ucode op_mode iwlmvm
[    6.886604] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    6.886805] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.887512] pps_core: LinuxPPS API ver. 1 registered
[    6.887515] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    6.889570] usb 6-1.4: USB disconnect, device number 4
[    6.895037] PTP clock support registered
[    6.928173] input: UNIW0001:00 093A:0274 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input12
[    6.928368] input: UNIW0001:00 093A:0274 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-16/i2c-UNIW0001:00/0018:093A:0274.0004/input/input13
[    6.928455] hid-multitouch 0018:093A:0274.0004: input,hidraw3: I2C HID v1.00 Mouse [UNIW0001:00 093A:0274] on i2c-UNIW0001:00
[    6.989536] usbcore: registered new interface driver btusb
[    6.991648] Bluetooth: hci0: Device revision is 2
[    6.991653] Bluetooth: hci0: Secure boot is enabled
[    6.991655] Bluetooth: hci0: OTP lock is enabled
[    6.991656] Bluetooth: hci0: API lock is enabled
[    6.991657] Bluetooth: hci0: Debug lock is disabled
[    6.991658] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.991661] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[    6.991749] ACPI Warning: \_SB.PC00.XHCI.RHUB.HS10._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20230628/nsarguments-61)
[    6.991791] Bluetooth: hci0: DSM reset method type: 0x00
[    6.994261] mousedev: PS/2 mouse device common for all mice
[    6.996976] Bluetooth: hci0: Found device firmware: intel/ibt-0040-4150.sfi
[    6.996991] Bluetooth: hci0: Boot Address: 0x100800
[    6.996993] Bluetooth: hci0: Firmware Version: 46-14.24
[    7.033665] intel_tcc_cooling: Programmable TCC Offset detected
[    7.081129] thunderbolt 0000:00:0d.2: acking hot plug event on 0:1
[    7.081145] thunderbolt 0000:00:0d.2: 0:1: hotplug: scanning
[    7.081367] thunderbolt 0000:00:0d.2: 0:1: is connected, link is up (state: 2)
[    7.083150] thunderbolt 0000:00:0d.2: 0:1: reading NVM authentication status of retimers
[    7.088608] thunderbolt 0000:00:0d.2: acking hot plug event on 0:2
[    7.545056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.545059] Bluetooth: BNEP filters: protocol multicast
[    7.545062] Bluetooth: BNEP socket layer initialized
[    7.696075] thunderbolt 0000:00:0d.2: 0:1: disabling sideband transactions
[    7.782517] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[    7.785109] r8152 6-1.4.4:1.0 (unnamed net_device) (uninitialized): Get ether addr fail
[    7.785211] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.785279] r8152-cfgselector 6-1.4.4: USB disconnect, device number 5
[    7.787953] usb 5-1.4.1: Not enough bandwidth for altsetting 1
[    7.787959] usb 5-1.4.1: 1:1: cannot set freq 44100 to ep 0x81
[    7.788469] r8152 6-1.4.4:1.0 eth0: v1.12.13
[    7.789887] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.789892] usb 5-1.4.1: Not enough bandwidth for altsetting 2
[    7.789896] usb 5-1.4.1: 1:2: cannot set freq 44100 to ep 0x81
[    7.790019] usbcore: registered new interface driver r8152
[    7.791617] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.791638] usb 5-1.4.1: Not enough bandwidth for altsetting 3
[    7.791644] usb 5-1.4.1: 1:3: cannot set freq 44100 to ep 0x81
[    7.793774] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.793783] usb 5-1.4.1: Not enough bandwidth for altsetting 4
[    7.793789] usb 5-1.4.1: 1:4: cannot set freq 48000 to ep 0x81
[    7.795758] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.795767] usb 5-1.4.1: Not enough bandwidth for altsetting 5
[    7.795774] usb 5-1.4.1: 1:5: cannot set freq 48000 to ep 0x81
[    7.797792] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.797798] usb 5-1.4.1: Not enough bandwidth for altsetting 6
[    7.797802] usb 5-1.4.1: 1:6: cannot set freq 48000 to ep 0x81
[    7.799894] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.799905] usb 5-1.4.1: Not enough bandwidth for altsetting 7
[    7.799911] usb 5-1.4.1: 1:7: cannot set freq 96000 to ep 0x81
[    7.801572] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.801575] usb 5-1.4.1: Not enough bandwidth for altsetting 8
[    7.801577] usb 5-1.4.1: 1:8: cannot set freq 96000 to ep 0x81
[    7.803218] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.803220] usb 5-1.4.1: Not enough bandwidth for altsetting 9
[    7.803222] usb 5-1.4.1: 1:9: cannot set freq 96000 to ep 0x81
[    7.804684] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.804685] usb 5-1.4.1: Not enough bandwidth for altsetting 10
[    7.804687] usb 5-1.4.1: 1:10: cannot set freq 192000 to ep 0x81
[    7.805955] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.805956] usb 5-1.4.1: Not enough bandwidth for altsetting 11
[    7.805958] usb 5-1.4.1: 1:11: cannot set freq 192000 to ep 0x81
[    7.807055] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.807056] usb 5-1.4.1: Not enough bandwidth for altsetting 12
[    7.807057] usb 5-1.4.1: 1:12: cannot set freq 192000 to ep 0x81
[    7.808118] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.808153] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.808155] usb 5-1.4.1: Not enough bandwidth for altsetting 1
[    7.808156] usb 5-1.4.1: 2:1: cannot set freq 44100 to ep 0x4
[    7.809232] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.809235] usb 5-1.4.1: Not enough bandwidth for altsetting 2
[    7.809238] usb 5-1.4.1: 2:2: cannot set freq 44100 to ep 0x4
[    7.810294] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.810295] usb 5-1.4.1: Not enough bandwidth for altsetting 3
[    7.810296] usb 5-1.4.1: 2:3: cannot set freq 44100 to ep 0x4
[    7.811328] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.811329] usb 5-1.4.1: Not enough bandwidth for altsetting 4
[    7.811330] usb 5-1.4.1: 2:4: cannot set freq 48000 to ep 0x4
[    7.812301] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.812302] usb 5-1.4.1: Not enough bandwidth for altsetting 5
[    7.812303] usb 5-1.4.1: 2:5: cannot set freq 48000 to ep 0x4
[    7.813339] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.813340] usb 5-1.4.1: Not enough bandwidth for altsetting 6
[    7.813341] usb 5-1.4.1: 2:6: cannot set freq 48000 to ep 0x4
[    7.814381] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.814383] usb 5-1.4.1: Not enough bandwidth for altsetting 7
[    7.814384] usb 5-1.4.1: 2:7: cannot set freq 96000 to ep 0x4
[    7.815426] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.815428] usb 5-1.4.1: Not enough bandwidth for altsetting 8
[    7.815429] usb 5-1.4.1: 2:8: cannot set freq 96000 to ep 0x4
[    7.816398] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.816399] usb 5-1.4.1: Not enough bandwidth for altsetting 9
[    7.816400] usb 5-1.4.1: 2:9: cannot set freq 96000 to ep 0x4
[    7.817337] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.817339] usb 5-1.4.1: Not enough bandwidth for altsetting 10
[    7.817340] usb 5-1.4.1: 2:10: cannot set freq 192000 to ep 0x4
[    7.818266] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.818267] usb 5-1.4.1: Not enough bandwidth for altsetting 11
[    7.818268] usb 5-1.4.1: 2:11: cannot set freq 192000 to ep 0x4
[    7.818497] usbcore: registered new interface driver cdc_ether
[    7.819225] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.819231] usb 5-1.4.1: Not enough bandwidth for altsetting 12
[    7.819236] usb 5-1.4.1: 2:12: cannot set freq 192000 to ep 0x4
[    7.820314] usb 5-1.4.1: Not enough bandwidth for altsetting 0
[    7.820444] usb 5-1.4.1: 19:0: failed to get current value for ch 0 (-22)
[    7.820534] usb 5-1.4.1: 19:0: cannot get min/max values for control 2 (id 19)
[    7.821504] usb 5-1.4.1: 25:0: failed to get current value for ch 0 (-22)
[    7.821648] usb 5-1.4.1: 22:0: failed to get current value for ch 0 (-22)
[    7.821731] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.822838] usbcore: registered new interface driver snd-usb-audio
[    7.828978] usbcore: registered new interface driver r8153_ecm
[    7.839263] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x370
[    7.839326] thermal thermal_zone4: failed to read out thermal zone (-61)
[    7.840997] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.841842] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.842722] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.843559] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.844365] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.845183] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.846638] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.847712] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.848702] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.849700] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.850022] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    7.850667] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.912659] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.913663] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.914542] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.915365] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.916198] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.916273] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.917716] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.917801] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.917889] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.917997] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.918181] usb 5-1.4.1: 22:0: cannot get min/max values for control 2 (id 22)
[    7.954774] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    7.954824] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    7.954884] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    7.954943] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    7.955180] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    7.956179] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    8.012936] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.013562] typec port0: bound usb3-port2 (ops connector_ops)
[    8.013598] typec port0: bound usb2-port1 (ops connector_ops)
[    8.019969] xhci_hcd 0000:05:00.0: USB bus 6 deregistered
[    8.020019] xhci_hcd 0000:05:00.0: remove, state 1
[    8.020030] usb usb5: USB disconnect, device number 1
[    8.020034] usb 5-1: USB disconnect, device number 2
[    8.020037] usb 5-1.4: USB disconnect, device number 3
[    8.020040] usb 5-1.4.1: USB disconnect, device number 4
[    8.022303] iwlwifi 0000:00:14.3: base HW address: 7c:21:4a:40:58:49
[    8.040572] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    8.057245] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    8.062253] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.062259] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.062261] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.062263] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.062264] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.062265] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    8.062266] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    8.142670] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    8.156389] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    8.156446] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    8.156498] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    8.156509] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    8.157841] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    8.209287] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    8.209468] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    8.209937] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    8.210776] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    8.211660] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    8.220510] xhci_hcd 0000:05:00.0: Host halt failed, -19
[    8.220515] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[    8.221020] xhci_hcd 0000:05:00.0: USB bus 5 deregistered
[    8.222153] pci_bus 0000:05: busn_res: [bus 05] is released
[    8.222753] pci_bus 0000:04: busn_res: [bus 04-05] is released
[    8.225355] thunderbolt 0-0:1.1: NVM version 7.0
[    8.225360] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
[    8.226410] thunderbolt 0000:00:0d.2: current switch config:
[    8.226413] thunderbolt 0000:00:0d.2:  Thunderbolt 3 Switch: 8086:15ef (Revision: 6, TB Version: 16)
[    8.226417] thunderbolt 0000:00:0d.2:   Max Port Number: 13
[    8.226420] thunderbolt 0000:00:0d.2:   Config:
[    8.226421] thunderbolt 0000:00:0d.2:    Upstream Port Number: 0 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
[    8.226424] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
[    8.227755] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    8.234944] thunderbolt 0000:00:0d.2: initializing Switch at 0x1 (depth: 1, up port: 1)
[    8.246755] thunderbolt 0000:00:0d.2: acking hot plug event on 1:2
[    8.267378] thunderbolt 0000:00:0d.2: 1: reading DROM (length: 0x6d)
[    8.285368] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    8.384782] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    8.384841] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    8.384889] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
[    8.384896] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10
[    8.386037] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
[    8.626423] Bluetooth: hci0: Waiting for firmware download to complete
[    8.626662] Bluetooth: hci0: Firmware loaded in 1591486 usecs
[    8.626783] Bluetooth: hci0: Waiting for device to boot
[    8.641868] Bluetooth: hci0: Device booted in 14816 usecs
[    8.641890] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    8.642100] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0040-4150.ddc
[    8.644920] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.647936] Bluetooth: hci0: Firmware timestamp 2024.14 buildtype 1 build 81454
[    8.647942] Bluetooth: hci0: Firmware SHA1: 0xdfd62093
[    8.651882] Bluetooth: hci0: Fseq status: Success (0x00)
[    8.651887] Bluetooth: hci0: Fseq executed: 00.00.02.41
[    8.651889] Bluetooth: hci0: Fseq BT Top: 00.00.02.41
[    8.733410] Bluetooth: MGMT ver 1.22
[    8.740425] NET: Registered PF_ALG protocol family
[    8.879296] thunderbolt 0000:00:0d.2: 1: DROM version: 1
[    8.880631] thunderbolt 0000:00:0d.2: 1: uid: 0x3d600630c86400
[    8.884540] thunderbolt 0000:00:0d.2:  Port 1: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
[    8.884562] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    8.884564] thunderbolt 0000:00:0d.2:   Max counters: 16
[    8.884566] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
[    8.884567] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    8.887782] thunderbolt 0000:00:0d.2:  Port 2: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
[    8.887787] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
[    8.887789] thunderbolt 0000:00:0d.2:   Max counters: 16
[    8.887791] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
[    8.887792] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
[    8.887794] thunderbolt 0000:00:0d.2: 1:3: disabled by eeprom
[    8.887795] thunderbolt 0000:00:0d.2: 1:4: disabled by eeprom
[    8.887796] thunderbolt 0000:00:0d.2: 1:5: disabled by eeprom
[    8.887797] thunderbolt 0000:00:0d.2: 1:6: disabled by eeprom
[    8.887798] thunderbolt 0000:00:0d.2: 1:7: disabled by eeprom
[    8.888053] thunderbolt 0000:00:0d.2:  Port 8: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100102))
[    8.888056] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.888057] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.888058] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.888059] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.888848] thunderbolt 0000:00:0d.2:  Port 9: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    8.888850] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.888851] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.888852] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.888852] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.889379] thunderbolt 0000:00:0d.2:  Port 10: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    8.889381] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    8.889382] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.889383] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.889384] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.890457] thunderbolt 0000:00:0d.2:  Port 11: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    8.890459] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
[    8.890460] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.890461] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.890462] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.890721] thunderbolt 0000:00:0d.2:  Port 12: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
[    8.890723] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.890724] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.890725] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.890726] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.891534] thunderbolt 0000:00:0d.2:  Port 13: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
[    8.891545] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
[    8.891551] thunderbolt 0000:00:0d.2:   Max counters: 2
[    8.891557] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
[    8.891564] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
[    8.891825] thunderbolt 0000:00:0d.2: 1: current link speed 10.0 Gb/s
[    8.891827] thunderbolt 0000:00:0d.2: 1: current link width symmetric, single lane
[    8.892224] thunderbolt 0000:00:0d.2: 0:1: total credits changed 120 -> 60
[    8.892938] thunderbolt 0000:00:0d.2: 0:2: total credits changed 0 -> 60
[    8.893048] thunderbolt 0000:00:0d.2: 1: CLx: current mode: disabled
[    8.897789] thunderbolt 0000:00:0d.2: 1: TMU: supports uni-directional mode
[    8.898596] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
[    8.898660] thunderbolt 0-1: new device found, vendor=0x3d device=0x18
[    8.898663] thunderbolt 0-1: CalDigit, Inc. USB-C Pro Dock
[    8.900686] thunderbolt 0000:00:0d.2: 1: NVM version 43.0
[    8.901856] thunderbolt 0000:00:0d.2: 0:2: is connected, link is up (state: 2)
[    8.905863] thunderbolt 0000:00:0d.2: acking hot unplug event on 0:2
[    8.905873] thunderbolt 0000:00:0d.2: acking hot unplug event on 1:2
[    8.906143] thunderbolt 0000:00:0d.2: 0:1: total credits changed 60 -> 120
[    8.906275] thunderbolt 0000:00:0d.2: 0:2: total credits changed 60 -> 0
[    8.906957] thunderbolt 0000:00:0d.2: 1:1: total credits changed 60 -> 120
[    8.907069] thunderbolt 0000:00:0d.2: 1:2: total credits changed 60 -> 0
[    8.907344] thunderbolt 0000:00:0d.2: 1: link width set to symmetric, dual lanes
[    8.910266] thunderbolt 0000:00:0d.2: 1:1: CLx: CL0s/CL1 supported
[    8.910268] thunderbolt 0000:00:0d.2: 0:1: CLx: CL0s/CL1 supported
[    8.911725] thunderbolt 0000:00:0d.2: 1: CLx: CL0s/CL1 enabled
[    8.911727] thunderbolt 0000:00:0d.2: 1: TMU: mode change bi-directional, HiFi -> uni-directional, LowRes requested
[    8.913071] thunderbolt 0000:00:0d.2: 1: TMU: disabled
[    8.917344] thunderbolt 0000:00:0d.2: 1: TMU: mode set to: uni-directional, LowRes
[    8.918406] thunderbolt 0000:00:0d.2: 1:10: DP adapter HPD set, queuing hotplug
[    8.918669] thunderbolt 0000:00:0d.2: 1:11: DP adapter HPD set, queuing hotplug
[    8.918814] thunderbolt 0000:00:0d.2: 0:8 <-> 1:8 (PCI): activating
[    8.918819] thunderbolt 0000:00:0d.2: activating PCIe Down path from 0:8 to 1:8
[    8.919491] thunderbolt 0000:00:0d.2: 1:1: Writing hop 1
[    8.919493] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 8 => Out port: 8 Out HopID: 8
[    8.919496] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 3 Credits: 32 Drop: 0 PM: 0
[    8.919498] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 2047
[    8.919500] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.919502] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.919804] thunderbolt 0000:00:0d.2: 0:8: Writing hop 0
[    8.919806] thunderbolt 0000:00:0d.2: 0:8:  In HopID: 8 => Out port: 1 Out HopID: 8
[    8.919808] thunderbolt 0000:00:0d.2: 0:8:   Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[    8.919810] thunderbolt 0000:00:0d.2: 0:8:    Counter enabled: 0 Counter index: 2047
[    8.919812] thunderbolt 0000:00:0d.2: 0:8:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.919814] thunderbolt 0000:00:0d.2: 0:8:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.919936] thunderbolt 0000:00:0d.2: path activation complete
[    8.919938] thunderbolt 0000:00:0d.2: activating PCIe Up path from 1:8 to 0:8
[    8.920069] thunderbolt 0000:00:0d.2: 0:1: Writing hop 1
[    8.920071] thunderbolt 0000:00:0d.2: 0:1:  In HopID: 8 => Out port: 8 Out HopID: 8
[    8.920073] thunderbolt 0000:00:0d.2: 0:1:   Weight: 1 Priority: 3 Credits: 64 Drop: 0 PM: 0
[    8.920075] thunderbolt 0000:00:0d.2: 0:1:    Counter enabled: 0 Counter index: 2047
[    8.920077] thunderbolt 0000:00:0d.2: 0:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.920080] thunderbolt 0000:00:0d.2: 0:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.920339] thunderbolt 0000:00:0d.2: 1:8: Writing hop 0
[    8.920342] thunderbolt 0000:00:0d.2: 1:8:  In HopID: 8 => Out port: 1 Out HopID: 8
[    8.920344] thunderbolt 0000:00:0d.2: 1:8:   Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[    8.920346] thunderbolt 0000:00:0d.2: 1:8:    Counter enabled: 0 Counter index: 2047
[    8.920348] thunderbolt 0000:00:0d.2: 1:8:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.920350] thunderbolt 0000:00:0d.2: 1:8:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.920978] thunderbolt 0000:00:0d.2: path activation complete
[    8.923786] thunderbolt 0000:00:0d.2: 1:1: xHCI connected
[    8.924173] thunderbolt 0000:00:0d.2: 1:3: xHCI connected
[    8.924197] thunderbolt 0000:00:0d.2: 0:2: got plug event for connected port, ignoring
[    8.924210] thunderbolt 0000:00:0d.2: hotplug event for upstream port 1:2 (unplug: 0)
[    8.924213] thunderbolt 0000:00:0d.2: 0:2: got unplug event for disconnected port, ignoring
[    8.924216] thunderbolt 0000:00:0d.2: hotplug event for upstream port 1:2 (unplug: 1)
[    8.924308] thunderbolt 0000:00:0d.2: 1:10: DP OUT resource available after hotplug
[    8.924311] thunderbolt 0000:00:0d.2: looking for DP IN <-> DP OUT pairs:
[    8.924444] thunderbolt 0000:00:0d.2: 0:5: DP IN available
[    8.925561] thunderbolt 0000:00:0d.2: 1:10: DP OUT available
[    8.927238] thunderbolt 0000:00:0d.2: 0: allocated DP resource for port 5
[    8.927244] thunderbolt 0000:00:0d.2: 0:5: attached to bandwidth group 1
[    8.928190] thunderbolt 0000:00:0d.2: 0:1: link maximum bandwidth 18000/18000 Mb/s
[    8.928454] thunderbolt 0000:00:0d.2: 1:1: link maximum bandwidth 18000/18000 Mb/s
[    8.928589] thunderbolt 0000:00:0d.2: available bandwidth for new DP tunnel 18000/18000 Mb/s
[    8.928596] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): activating
[    8.930748] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[    8.930754] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
[    8.930758] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): disabling LTTPR
[    8.930992] thunderbolt 0000:00:0d.2: activating Video path from 0:5 to 1:10
[    8.930994] thunderbolt 0000:00:0d.2: 1:1: adding 12 NFC credits to 0
[    8.931256] thunderbolt 0000:00:0d.2: 1:1: Writing hop 1
[    8.931258] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 9 => Out port: 10 Out HopID: 9
[    8.931261] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[    8.931263] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 2047
[    8.931265] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.931267] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.932088] thunderbolt 0000:00:0d.2: 0:5: Writing hop 0
[    8.932092] thunderbolt 0000:00:0d.2: 0:5:  In HopID: 9 => Out port: 1 Out HopID: 9
[    8.932095] thunderbolt 0000:00:0d.2: 0:5:   Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[    8.932098] thunderbolt 0000:00:0d.2: 0:5:    Counter enabled: 0 Counter index: 2047
[    8.932100] thunderbolt 0000:00:0d.2: 0:5:   Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[    8.932102] thunderbolt 0000:00:0d.2: 0:5:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.932218] thunderbolt 0000:00:0d.2: path activation complete
[    8.932221] thunderbolt 0000:00:0d.2: activating AUX TX path from 0:5 to 1:10
[    8.932480] thunderbolt 0000:00:0d.2: 1:1: Writing hop 1
[    8.932485] thunderbolt 0000:00:0d.2: 1:1:  In HopID: 10 => Out port: 10 Out HopID: 8
[    8.932488] thunderbolt 0000:00:0d.2: 1:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.932490] thunderbolt 0000:00:0d.2: 1:1:    Counter enabled: 0 Counter index: 2047
[    8.932491] thunderbolt 0000:00:0d.2: 1:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.932493] thunderbolt 0000:00:0d.2: 1:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.932929] thunderbolt 0000:00:0d.2: 0:5: Writing hop 0
[    8.932934] thunderbolt 0000:00:0d.2: 0:5:  In HopID: 8 => Out port: 1 Out HopID: 10
[    8.932936] thunderbolt 0000:00:0d.2: 0:5:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.932937] thunderbolt 0000:00:0d.2: 0:5:    Counter enabled: 0 Counter index: 2047
[    8.932939] thunderbolt 0000:00:0d.2: 0:5:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.932941] thunderbolt 0000:00:0d.2: 0:5:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.933620] thunderbolt 0000:00:0d.2: path activation complete
[    8.933624] thunderbolt 0000:00:0d.2: activating AUX RX path from 1:10 to 0:5
[    8.933795] thunderbolt 0000:00:0d.2: 0:1: Writing hop 1
[    8.933800] thunderbolt 0000:00:0d.2: 0:1:  In HopID: 9 => Out port: 5 Out HopID: 8
[    8.933802] thunderbolt 0000:00:0d.2: 0:1:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.933804] thunderbolt 0000:00:0d.2: 0:1:    Counter enabled: 0 Counter index: 2047
[    8.933806] thunderbolt 0000:00:0d.2: 0:1:   Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[    8.933808] thunderbolt 0000:00:0d.2: 0:1:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.934033] thunderbolt 0000:00:0d.2: 1:10: Writing hop 0
[    8.934035] thunderbolt 0000:00:0d.2: 1:10:  In HopID: 8 => Out port: 1 Out HopID: 9
[    8.934037] thunderbolt 0000:00:0d.2: 1:10:   Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[    8.934038] thunderbolt 0000:00:0d.2: 1:10:    Counter enabled: 0 Counter index: 2047
[    8.934040] thunderbolt 0000:00:0d.2: 1:10:   Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[    8.934041] thunderbolt 0000:00:0d.2: 1:10:   Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[    8.934167] thunderbolt 0000:00:0d.2: path activation complete
[    9.002042] thunderbolt 0000:00:0d.2: acking hot plug event on 1:11
[    9.003036] thunderbolt 0000:00:0d.2: acking hot plug event on 1:10
[    9.149361] pcieport 0000:00:07.0: pciehp: Slot(3): Card present
[    9.149367] pcieport 0000:00:07.0: pciehp: Slot(3): Link Up
[    9.218482] Bluetooth: RFCOMM TTY layer initialized
[    9.218491] Bluetooth: RFCOMM socket layer initialized
[    9.218497] Bluetooth: RFCOMM ver 1.11
[    9.285792] pci 0000:03:00.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Upstream Port
[    9.285877] pci 0000:03:00.0: PCI bridge to [bus 00]
[    9.285902] pci 0000:03:00.0:   bridge window [io  0x0000-0x0fff]
[    9.285914] pci 0000:03:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    9.285946] pci 0000:03:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    9.285982] pci 0000:03:00.0: enabling Extended Tags
[    9.286310] pci 0000:03:00.0: supports D1 D2
[    9.286314] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.286524] pci 0000:03:00.0: PTM enabled, 4ns granularity
[    9.286645] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    9.287139] pci 0000:03:00.0: Adding to iommu group 14
[    9.287373] pcieport 0000:00:07.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[    9.295791] pci 0000:03:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    9.295987] pci 0000:04:02.0: [8086:15ef] type 01 class 0x060400 PCIe Switch Downstream Port
[    9.296044] pci 0000:04:02.0: PCI bridge to [bus 00]
[    9.296059] pci 0000:04:02.0:   bridge window [io  0x0000-0x0fff]
[    9.296066] pci 0000:04:02.0:   bridge window [mem 0x00000000-0x000fffff]
[    9.296090] pci 0000:04:02.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    9.296120] pci 0000:04:02.0: enabling Extended Tags
[    9.296378] pci 0000:04:02.0: supports D1 D2
[    9.296381] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.296723] pci 0000:04:02.0: Adding to iommu group 15
[    9.296915] pci 0000:03:00.0: PCI bridge to [bus 04-2c]
[    9.296945] pci 0000:04:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    9.297112] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
[    9.297146] pci 0000:05:00.0: BAR 0 [mem 0x00000000-0x0000ffff]
[    9.297249] pci 0000:05:00.0: enabling Extended Tags
[    9.297479] pci 0000:05:00.0: supports D1 D2
[    9.297481] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.297717] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    9.297894] pci 0000:05:00.0: Adding to iommu group 16
[    9.298058] pci 0000:04:02.0: PCI bridge to [bus 05-2c]
[    9.298085] pci_bus 0000:05: busn_res: [bus 05-2c] end is updated to 05
[    9.298094] pci_bus 0000:04: busn_res: [bus 04-2c] end is updated to 05
[    9.298110] pci 0000:03:00.0: bridge window [mem 0x52000000-0x5e1fffff]: assigned
[    9.298113] pci 0000:03:00.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]: assigned
[    9.298116] pci 0000:03:00.0: bridge window [io  0x4000-0x4fff]: assigned
[    9.298120] pci 0000:04:02.0: bridge window [mem 0x52000000-0x5e1fffff]: assigned
[    9.298122] pci 0000:04:02.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]: assigned
[    9.298125] pci 0000:04:02.0: bridge window [io  0x4000-0x4fff]: assigned
[    9.298127] pci 0000:05:00.0: BAR 0 [mem 0x52000000-0x5200ffff]: assigned
[    9.298135] pci 0000:04:02.0: PCI bridge to [bus 05]
[    9.298139] pci 0000:04:02.0:   bridge window [io  0x4000-0x4fff]
[    9.298148] pci 0000:04:02.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    9.298155] pci 0000:04:02.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    9.298166] pci 0000:03:00.0: PCI bridge to [bus 04-05]
[    9.298170] pci 0000:03:00.0:   bridge window [io  0x4000-0x4fff]
[    9.298179] pci 0000:03:00.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    9.298186] pci 0000:03:00.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    9.298197] pcieport 0000:00:07.0: PCI bridge to [bus 03-2c]
[    9.298200] pcieport 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
[    9.298205] pcieport 0000:00:07.0:   bridge window [mem 0x52000000-0x5e1fffff]
[    9.298209] pcieport 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    9.298375] pcieport 0000:03:00.0: enabling device (0000 -> 0003)
[    9.298722] pcieport 0000:04:02.0: enabling device (0000 -> 0003)
[    9.299784] pci 0000:05:00.0: enabling device (0000 -> 0002)
[    9.300388] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    9.300397] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    9.301802] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    9.302393] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    9.302398] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    9.302401] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    9.302459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    9.302462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.302465] usb usb5: Product: xHCI Host Controller
[    9.302466] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    9.302468] usb usb5: SerialNumber: 0000:05:00.0
[    9.302783] hub 5-0:1.0: USB hub found
[    9.302794] hub 5-0:1.0: 2 ports detected
[    9.302992] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    9.302995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.302997] usb usb6: Product: xHCI Host Controller
[    9.302998] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
[    9.303000] usb usb6: SerialNumber: 0000:05:00.0
[    9.303557] hub 6-0:1.0: USB hub found
[    9.303567] hub 6-0:1.0: 2 ports detected
[    9.552443] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[   10.130905] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
[   10.131029] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
[   10.131047] thunderbolt 0000:00:0d.2: bandwidth consumption changed, re-calculating estimated bandwidth
[   10.131051] thunderbolt 0000:00:0d.2: re-calculating bandwidth estimation for group 1
[   10.131198] thunderbolt 0000:00:0d.2: bandwidth estimation for group 1 done
[   10.131206] thunderbolt 0000:00:0d.2: bandwidth re-calculation done
[   10.131212] thunderbolt 0000:00:0d.2: 1: TMU: mode change uni-directional, LowRes -> uni-directional, HiFi requested
[   10.135515] thunderbolt 0000:00:0d.2: 1: TMU: mode set to: uni-directional, HiFi
[   10.136473] thunderbolt 0000:00:0d.2: 0:6: DP IN available
[   10.136606] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
[   10.136610] thunderbolt 0000:00:0d.2: 0:6: no suitable DP OUT adapter available, not tunneling
[   10.136743] thunderbolt 0000:00:0d.2: 1:11: DP OUT resource available after hotplug
[   10.136748] thunderbolt 0000:00:0d.2: looking for DP IN <-> DP OUT pairs:
[   10.136876] thunderbolt 0000:00:0d.2: 0:5: DP IN in use
[   10.137568] thunderbolt 0000:00:0d.2: 0:6: DP IN available
[   10.137687] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
[   10.137820] thunderbolt 0000:00:0d.2: 1:11: DP OUT available
[   10.139280] thunderbolt 0000:00:0d.2: 0: allocated DP resource for port 6
[   10.139286] thunderbolt 0000:00:0d.2: 0:6: attached to bandwidth group 1
[   10.139694] thunderbolt 0000:00:0d.2: 0:1: link maximum bandwidth 18000/18000 Mb/s
[   10.140680] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
[   10.140829] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
[   10.140963] thunderbolt 0000:00:0d.2: 1:1: link maximum bandwidth 18000/18000 Mb/s
[   10.141892] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
[   10.142027] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
[   10.142033] thunderbolt 0000:00:0d.2: available bandwidth for new DP tunnel 18000/720 Mb/s
[   10.142052] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): activating
[   10.143353] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[   10.143360] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
[   10.143366] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): not enough bandwidth
[   10.143371] thunderbolt 0000:00:0d.2: 1:11: DP tunnel activation failed, aborting
[   10.143489] thunderbolt 0000:00:0d.2: 0:6: detached from bandwidth group 1
[   10.144883] thunderbolt 0000:00:0d.2: 0: released DP resource for port 6
[   14.902955] usb 5-1: unable to get BOS descriptor set
[   14.906143] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
[   14.906167] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   14.906175] usb 5-1: Product: USB2.1 Hub
[   14.906183] usb 5-1: Manufacturer: CalDigit, Inc.
[   14.908660] hub 5-1:1.0: USB hub found
[   14.909135] hub 5-1:1.0: 4 ports detected
[   15.026182] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[   15.050199] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
[   15.050223] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   15.050231] usb 6-1: Product: USB3.1 Gen2 Hub
[   15.050237] usb 6-1: Manufacturer: CalDigit, Inc.
[   15.053712] hub 6-1:1.0: USB hub found
[   15.054279] hub 6-1:1.0: 4 ports detected
[   15.215877] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
[   15.333676] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
[   15.333703] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   15.333711] usb 5-1.4: Product: USB2.1 Hub
[   15.333718] usb 5-1.4: Manufacturer: CalDigit, Inc.
[   15.336484] hub 5-1.4:1.0: USB hub found
[   15.336797] hub 5-1.4:1.0: 4 ports detected
[   15.402943] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[   15.425589] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
[   15.425615] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[   15.425623] usb 6-1.1: Product: USB-C Pro Card Reader
[   15.425691] usb 6-1.1: Manufacturer: CalDigit
[   15.425697] usb 6-1.1: SerialNumber: 000000000006
[   15.432231] usb-storage 6-1.1:1.0: USB Mass Storage device detected
[   15.433690] scsi host0: usb-storage 6-1.1:1.0
[   15.506218] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[   15.528220] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
[   15.528237] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   15.528241] usb 6-1.4: Product: USB3.1 Gen1 Hub
[   15.528244] usb 6-1.4: Manufacturer: CalDigit, Inc.
[   15.531198] hub 6-1.4:1.0: USB hub found
[   15.531506] hub 6-1.4:1.0: 4 ports detected
[   15.649217] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
[   15.989548] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
[   16.007996] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[   16.008021] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   16.008029] usb 6-1.4.4: Product: USB 10/100/1000 LAN
[   16.008035] usb 6-1.4.4: Manufacturer: Realtek
[   16.008040] usb 6-1.4.4: SerialNumber: 001001000
[   16.090287] r8152-cfgselector 6-1.4.4: reset SuperSpeed USB device number 5 using xhci_hcd
[   16.136796] r8152 6-1.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
[   16.171430] r8152 6-1.4.4:1.0 eth0: v1.12.13
[   16.209513] r8152 6-1.4.4:1.0 enp5s0u1u4u4: renamed from eth0
[   16.453330] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
[   16.454420] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.455908] sd 0:0:0:0: [sda] Media removed, stopped polling
[   16.457173] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.497559] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
[   16.497567] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[   16.497570] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
[   16.497572] usb 5-1.4.1: Manufacturer: CalDigit Inc.
[   16.920216] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[   17.494492] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0005/input/input20
[   17.550258] hid-generic 0003:2188:4042.0005: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
[   19.609816] r8152 6-1.4.4:1.0 enp5s0u1u4u4: carrier on
[   39.990148] ACPI BIOS Error (bug): Could not resolve symbol [^^^^NPCF.ACBT], AE_NOT_FOUND (20230628/psargs-330)
[   39.994211] ACPI Error: Aborting method \_SB.PC00.LPCB.EC0._Q83 due to previous error (AE_NOT_FOUND) (20230628/psparse-529)

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

Hi,

On Mon, May 20, 2024 at 05:12:40PM +0200, Benjamin Böhmke wrote:
> On Monday, May 20, 2024 16:41 CEST, Mario Limonciello <mario.limonciello@amd.com> wrote:
> 
> > On 5/20/2024 09:39, Christian Heusel wrote:
> > > On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> > >> [CCing Mario, who asked for the two suspected commits to be backported]
> > >>
> > >> On 06.05.24 14:24, Gia wrote:
> > >>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> > >>> TS3 Plus Thunderbolt 3 dock.
> > >>>
> > >>> After the update I see this message on boot "xHCI host controller not
> > >>> responding, assume dead" and the dock is not working anymore. Kernel
> > >>> 6.8.7 works great.
> > > 
> > > We now have some further information on the matter as somebody was kind
> > > enough to bisect the issue in the [Arch Linux Forums][0]:
> > > 
> > >      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> > > 
> > > This is a stable commit id, the relevant mainline commit is:
> > > 
> > >      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> > > 
> > > The other reporter created [a issue][1] in our bugtracker, which I'll
> > > leave here just for completeness sake.
> > > 
> > > Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > Reported-by: Gia <giacomo.gio@gmail.com>
> > > Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > 
> > > The person doing the bisection also offered to chime in here if further
> > > debugging is needed!
> > > 
> > > Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> > > 
> > > Cheers,
> > > Christian
> > > 
> > > [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> > > [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > > 
> > > #regzbot introduced: 59a54c5f3dbd
> > > #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > 
> > As I mentioned in my other email I would like to collate logs onto a 
> > kernel Bugzilla.  With these two cases:
> > 
> > thunderbolt.dyndbg=+p
> > thunderbolt.dyndbg=+p thunderbolt.host_reset=false
> > 
> > Also what is the value for:
> > 
> > $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> 
> I attached the requested kernel logs as text files (hope this is ok).
> In both cases I used the stable ArchLinux kernel 6.9.1
> 
> The iommu_dma_protection is both cases "1".
> 
> Best Regards
> Benjamin

After reset the link comes up just fine but there is one thing that I
noticed:

> [    8.225355] thunderbolt 0-0:1.1: NVM version 7.0
> [    8.225360] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
> [    8.226410] thunderbolt 0000:00:0d.2: current switch config:
> [    8.226413] thunderbolt 0000:00:0d.2:  Thunderbolt 3 Switch: 8086:15ef (Revision: 6, TB Version: 16)
> [    8.226417] thunderbolt 0000:00:0d.2:   Max Port Number: 13
> [    8.226420] thunderbolt 0000:00:0d.2:   Config:
> [    8.226421] thunderbolt 0000:00:0d.2:    Upstream Port Number: 0 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
> [    8.226424] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
> [    8.227755] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
> [    8.234944] thunderbolt 0000:00:0d.2: initializing Switch at 0x1 (depth: 1, up port: 1)
> [    8.246755] thunderbolt 0000:00:0d.2: acking hot plug event on 1:2
> [    8.267378] thunderbolt 0000:00:0d.2: 1: reading DROM (length: 0x6d)
> [    8.879296] thunderbolt 0000:00:0d.2: 1: DROM version: 1
> [    8.880631] thunderbolt 0000:00:0d.2: 1: uid: 0x3d600630c86400
> [    8.884540] thunderbolt 0000:00:0d.2:  Port 1: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> [    8.884562] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> [    8.884564] thunderbolt 0000:00:0d.2:   Max counters: 16
> [    8.884566] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> [    8.884567] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> [    8.887782] thunderbolt 0000:00:0d.2:  Port 2: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> [    8.887787] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> [    8.887789] thunderbolt 0000:00:0d.2:   Max counters: 16
> [    8.887791] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> [    8.887792] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> [    8.887794] thunderbolt 0000:00:0d.2: 1:3: disabled by eeprom
> [    8.887795] thunderbolt 0000:00:0d.2: 1:4: disabled by eeprom
> [    8.887796] thunderbolt 0000:00:0d.2: 1:5: disabled by eeprom
> [    8.887797] thunderbolt 0000:00:0d.2: 1:6: disabled by eeprom
> [    8.887798] thunderbolt 0000:00:0d.2: 1:7: disabled by eeprom
> [    8.888053] thunderbolt 0000:00:0d.2:  Port 8: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100102))
> [    8.888056] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> [    8.888057] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.888058] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.888059] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.888848] thunderbolt 0000:00:0d.2:  Port 9: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
> [    8.888850] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> [    8.888851] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.888852] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.888852] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.889379] thunderbolt 0000:00:0d.2:  Port 10: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> [    8.889381] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> [    8.889382] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.889383] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.889384] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.890457] thunderbolt 0000:00:0d.2:  Port 11: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> [    8.890459] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> [    8.890460] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.890461] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.890462] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.890721] thunderbolt 0000:00:0d.2:  Port 12: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> [    8.890723] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> [    8.890724] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.890725] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.890726] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.891534] thunderbolt 0000:00:0d.2:  Port 13: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> [    8.891545] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> [    8.891551] thunderbolt 0000:00:0d.2:   Max counters: 2
> [    8.891557] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> [    8.891564] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> [    8.891825] thunderbolt 0000:00:0d.2: 1: current link speed 10.0 Gb/s

Here it is 10G instead of 20G which limits the bandwidth available for
DP tunneling.

...

> [    9.297112] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
> [    9.297146] pci 0000:05:00.0: BAR 0 [mem 0x00000000-0x0000ffff]
> [    9.297249] pci 0000:05:00.0: enabling Extended Tags
> [    9.297479] pci 0000:05:00.0: supports D1 D2
> [    9.297481] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    9.297717] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)

The xHCI comes up just fine though.

> [    9.300388] xhci_hcd 0000:05:00.0: xHCI Host Controller
> [    9.300397] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
> [    9.301802] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
> [    9.302393] xhci_hcd 0000:05:00.0: xHCI Host Controller
> [    9.302398] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
> [    9.302401] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> [    9.302459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> [    9.302462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    9.302465] usb usb5: Product: xHCI Host Controller
> [    9.302466] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> [    9.302468] usb usb5: SerialNumber: 0000:05:00.0
> [    9.302783] hub 5-0:1.0: USB hub found
> [    9.302794] hub 5-0:1.0: 2 ports detected
> [    9.302992] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
> [    9.302995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    9.302997] usb usb6: Product: xHCI Host Controller
> [    9.302998] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> [    9.303000] usb usb6: SerialNumber: 0000:05:00.0
> [    9.303557] hub 6-0:1.0: USB hub found
> [    9.303567] hub 6-0:1.0: 2 ports detected
> [    9.552443] usb 5-1: new high-speed USB device number 2 using xhci_hcd
> [   10.130905] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> [   10.131029] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> [   10.131047] thunderbolt 0000:00:0d.2: bandwidth consumption changed, re-calculating estimated bandwidth
> [   10.131051] thunderbolt 0000:00:0d.2: re-calculating bandwidth estimation for group 1
> [   10.131198] thunderbolt 0000:00:0d.2: bandwidth estimation for group 1 done
> [   10.131206] thunderbolt 0000:00:0d.2: bandwidth re-calculation done
> [   10.131212] thunderbolt 0000:00:0d.2: 1: TMU: mode change uni-directional, LowRes -> uni-directional, HiFi requested
> [   10.135515] thunderbolt 0000:00:0d.2: 1: TMU: mode set to: uni-directional, HiFi
> [   10.136473] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> [   10.136606] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> [   10.136610] thunderbolt 0000:00:0d.2: 0:6: no suitable DP OUT adapter available, not tunneling
> [   10.136743] thunderbolt 0000:00:0d.2: 1:11: DP OUT resource available after hotplug
> [   10.136748] thunderbolt 0000:00:0d.2: looking for DP IN <-> DP OUT pairs:
> [   10.136876] thunderbolt 0000:00:0d.2: 0:5: DP IN in use
> [   10.137568] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> [   10.137687] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> [   10.137820] thunderbolt 0000:00:0d.2: 1:11: DP OUT available
> [   10.139280] thunderbolt 0000:00:0d.2: 0: allocated DP resource for port 6
> [   10.139286] thunderbolt 0000:00:0d.2: 0:6: attached to bandwidth group 1
> [   10.139694] thunderbolt 0000:00:0d.2: 0:1: link maximum bandwidth 18000/18000 Mb/s
> [   10.140680] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> [   10.140829] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> [   10.140963] thunderbolt 0000:00:0d.2: 1:1: link maximum bandwidth 18000/18000 Mb/s
> [   10.141892] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> [   10.142027] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> [   10.142033] thunderbolt 0000:00:0d.2: available bandwidth for new DP tunnel 18000/720 Mb/s
> [   10.142052] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): activating
> [   10.143353] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
> [   10.143360] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
> [   10.143366] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): not enough bandwidth
> [   10.143371] thunderbolt 0000:00:0d.2: 1:11: DP tunnel activation failed, aborting

However, the second DP tunnel fails because of no bandwidth.

> [   10.143489] thunderbolt 0000:00:0d.2: 0:6: detached from bandwidth group 1
> [   10.144883] thunderbolt 0000:00:0d.2: 0: released DP resource for port 6
> [   14.902955] usb 5-1: unable to get BOS descriptor set
> [   14.906143] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
> [   14.906167] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [   14.906175] usb 5-1: Product: USB2.1 Hub
> [   14.906183] usb 5-1: Manufacturer: CalDigit, Inc.
> [   14.908660] hub 5-1:1.0: USB hub found
> [   14.909135] hub 5-1:1.0: 4 ports detected
> [   15.026182] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
> [   15.050199] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
> [   15.050223] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [   15.050231] usb 6-1: Product: USB3.1 Gen2 Hub
> [   15.050237] usb 6-1: Manufacturer: CalDigit, Inc.
> [   15.053712] hub 6-1:1.0: USB hub found
> [   15.054279] hub 6-1:1.0: 4 ports detected
> [   15.215877] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
> [   15.333676] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
> [   15.333703] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [   15.333711] usb 5-1.4: Product: USB2.1 Hub
> [   15.333718] usb 5-1.4: Manufacturer: CalDigit, Inc.
> [   15.336484] hub 5-1.4:1.0: USB hub found
> [   15.336797] hub 5-1.4:1.0: 4 ports detected
> [   15.402943] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
> [   15.425589] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
> [   15.425615] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
> [   15.425623] usb 6-1.1: Product: USB-C Pro Card Reader
> [   15.425691] usb 6-1.1: Manufacturer: CalDigit
> [   15.425697] usb 6-1.1: SerialNumber: 000000000006
> [   15.432231] usb-storage 6-1.1:1.0: USB Mass Storage device detected
> [   15.433690] scsi host0: usb-storage 6-1.1:1.0
> [   15.506218] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
> [   15.528220] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
> [   15.528237] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [   15.528241] usb 6-1.4: Product: USB3.1 Gen1 Hub
> [   15.528244] usb 6-1.4: Manufacturer: CalDigit, Inc.
> [   15.531198] hub 6-1.4:1.0: USB hub found
> [   15.531506] hub 6-1.4:1.0: 4 ports detected
> [   15.649217] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
> [   15.989548] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
> [   16.007996] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
> [   16.008021] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> [   16.008029] usb 6-1.4.4: Product: USB 10/100/1000 LAN
> [   16.008035] usb 6-1.4.4: Manufacturer: Realtek
> [   16.008040] usb 6-1.4.4: SerialNumber: 001001000
> [   16.090287] r8152-cfgselector 6-1.4.4: reset SuperSpeed USB device number 5 using xhci_hcd
> [   16.136796] r8152 6-1.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
> [   16.171430] r8152 6-1.4.4:1.0 eth0: v1.12.13
> [   16.209513] r8152 6-1.4.4:1.0 enp5s0u1u4u4: renamed from eth0
> [   16.453330] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
> [   16.454420] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [   16.455908] sd 0:0:0:0: [sda] Media removed, stopped polling
> [   16.457173] sd 0:0:0:0: [sda] Attached SCSI removable disk
> [   16.497559] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
> [   16.497567] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
> [   16.497570] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
> [   16.497572] usb 5-1.4.1: Manufacturer: CalDigit Inc.
> [   16.920216] ucsi_acpi USBC000:00: possible UCSI driver bug 1
> [   17.494492] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0005/input/input20
> [   17.550258] hid-generic 0003:2188:4042.0005: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
> [   19.609816] r8152 6-1.4.4:1.0 enp5s0u1u4u4: carrier on

All the USB devices seem to work fine (assuming I read this right).

There is the DP tunneling limitation but other than that how the dock
does not work? At least reading this log everything else seems to be
fine except the second monitor?

Now it is interesting why the link is only 20G and not 40G. I do have
this same device and it gets the link up as 40G just fine:

[   17.867868] thunderbolt 0000:00:0d.2: 1: current link speed 20.0 Gb/s
[   17.867869] thunderbolt 0000:00:0d.2: 1: current link width symmetric, single lane
[   17.868437] thunderbolt 0000:00:0d.2: 0:1: total credits changed 120 -> 60
[   17.868625] thunderbolt 0000:00:0d.2: 0:2: total credits changed 0 -> 60
[   17.872472] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
[   17.872608] thunderbolt 0-1: new device found, vendor=0x3d device=0x11
[   17.879102] thunderbolt 0-1: CalDigit, Inc. TS3 Plus

Do you use a Thunderbolt cable or some regular type-C one? There is the
lightning symbol on the connector when it is Thunderbolt one.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Benjamin Böhmke]

On Monday, May 20, 2024 18:21 CEST, Mika Westerberg <mika.westerberg@linux.intel.com> wrote:

> Hi,
> 
> On Mon, May 20, 2024 at 05:12:40PM +0200, Benjamin Böhmke wrote:
> > On Monday, May 20, 2024 16:41 CEST, Mario Limonciello <mario.limonciello@amd.com> wrote:
> > 
> > > On 5/20/2024 09:39, Christian Heusel wrote:
> > > > On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> > > >> [CCing Mario, who asked for the two suspected commits to be backported]
> > > >>
> > > >> On 06.05.24 14:24, Gia wrote:
> > > >>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> > > >>> TS3 Plus Thunderbolt 3 dock.
> > > >>>
> > > >>> After the update I see this message on boot "xHCI host controller not
> > > >>> responding, assume dead" and the dock is not working anymore. Kernel
> > > >>> 6.8.7 works great.
> > > > 
> > > > We now have some further information on the matter as somebody was kind
> > > > enough to bisect the issue in the [Arch Linux Forums][0]:
> > > > 
> > > >      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> > > > 
> > > > This is a stable commit id, the relevant mainline commit is:
> > > > 
> > > >      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> > > > 
> > > > The other reporter created [a issue][1] in our bugtracker, which I'll
> > > > leave here just for completeness sake.
> > > > 
> > > > Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > > Reported-by: Gia <giacomo.gio@gmail.com>
> > > > Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > > 
> > > > The person doing the bisection also offered to chime in here if further
> > > > debugging is needed!
> > > > 
> > > > Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> > > > 
> > > > Cheers,
> > > > Christian
> > > > 
> > > > [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> > > > [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > > > 
> > > > #regzbot introduced: 59a54c5f3dbd
> > > > #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > > 
> > > As I mentioned in my other email I would like to collate logs onto a 
> > > kernel Bugzilla.  With these two cases:
> > > 
> > > thunderbolt.dyndbg=+p
> > > thunderbolt.dyndbg=+p thunderbolt.host_reset=false
> > > 
> > > Also what is the value for:
> > > 
> > > $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> > 
> > I attached the requested kernel logs as text files (hope this is ok).
> > In both cases I used the stable ArchLinux kernel 6.9.1
> > 
> > The iommu_dma_protection is both cases "1".
> > 
> > Best Regards
> > Benjamin
> 
> After reset the link comes up just fine but there is one thing that I
> noticed:
> 
> > [    8.225355] thunderbolt 0-0:1.1: NVM version 7.0
> > [    8.225360] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
> > [    8.226410] thunderbolt 0000:00:0d.2: current switch config:
> > [    8.226413] thunderbolt 0000:00:0d.2:  Thunderbolt 3 Switch: 8086:15ef (Revision: 6, TB Version: 16)
> > [    8.226417] thunderbolt 0000:00:0d.2:   Max Port Number: 13
> > [    8.226420] thunderbolt 0000:00:0d.2:   Config:
> > [    8.226421] thunderbolt 0000:00:0d.2:    Upstream Port Number: 0 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
> > [    8.226424] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
> > [    8.227755] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
> > [    8.234944] thunderbolt 0000:00:0d.2: initializing Switch at 0x1 (depth: 1, up port: 1)
> > [    8.246755] thunderbolt 0000:00:0d.2: acking hot plug event on 1:2
> > [    8.267378] thunderbolt 0000:00:0d.2: 1: reading DROM (length: 0x6d)
> > [    8.879296] thunderbolt 0000:00:0d.2: 1: DROM version: 1
> > [    8.880631] thunderbolt 0000:00:0d.2: 1: uid: 0x3d600630c86400
> > [    8.884540] thunderbolt 0000:00:0d.2:  Port 1: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> > [    8.884562] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> > [    8.884564] thunderbolt 0000:00:0d.2:   Max counters: 16
> > [    8.884566] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> > [    8.884567] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> > [    8.887782] thunderbolt 0000:00:0d.2:  Port 2: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> > [    8.887787] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> > [    8.887789] thunderbolt 0000:00:0d.2:   Max counters: 16
> > [    8.887791] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> > [    8.887792] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> > [    8.887794] thunderbolt 0000:00:0d.2: 1:3: disabled by eeprom
> > [    8.887795] thunderbolt 0000:00:0d.2: 1:4: disabled by eeprom
> > [    8.887796] thunderbolt 0000:00:0d.2: 1:5: disabled by eeprom
> > [    8.887797] thunderbolt 0000:00:0d.2: 1:6: disabled by eeprom
> > [    8.887798] thunderbolt 0000:00:0d.2: 1:7: disabled by eeprom
> > [    8.888053] thunderbolt 0000:00:0d.2:  Port 8: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100102))
> > [    8.888056] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > [    8.888057] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.888058] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.888059] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.888848] thunderbolt 0000:00:0d.2:  Port 9: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
> > [    8.888850] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > [    8.888851] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.888852] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.888852] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.889379] thunderbolt 0000:00:0d.2:  Port 10: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> > [    8.889381] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> > [    8.889382] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.889383] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.889384] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.890457] thunderbolt 0000:00:0d.2:  Port 11: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> > [    8.890459] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> > [    8.890460] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.890461] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.890462] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.890721] thunderbolt 0000:00:0d.2:  Port 12: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> > [    8.890723] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > [    8.890724] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.890725] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.890726] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.891534] thunderbolt 0000:00:0d.2:  Port 13: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> > [    8.891545] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > [    8.891551] thunderbolt 0000:00:0d.2:   Max counters: 2
> > [    8.891557] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > [    8.891564] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > [    8.891825] thunderbolt 0000:00:0d.2: 1: current link speed 10.0 Gb/s
> 
> Here it is 10G instead of 20G which limits the bandwidth available for
> DP tunneling.
> 
> ...
> 
> > [    9.297112] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
> > [    9.297146] pci 0000:05:00.0: BAR 0 [mem 0x00000000-0x0000ffff]
> > [    9.297249] pci 0000:05:00.0: enabling Extended Tags
> > [    9.297479] pci 0000:05:00.0: supports D1 D2
> > [    9.297481] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [    9.297717] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> 
> The xHCI comes up just fine though.
> 
> > [    9.300388] xhci_hcd 0000:05:00.0: xHCI Host Controller
> > [    9.300397] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
> > [    9.301802] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
> > [    9.302393] xhci_hcd 0000:05:00.0: xHCI Host Controller
> > [    9.302398] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
> > [    9.302401] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> > [    9.302459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> > [    9.302462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [    9.302465] usb usb5: Product: xHCI Host Controller
> > [    9.302466] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> > [    9.302468] usb usb5: SerialNumber: 0000:05:00.0
> > [    9.302783] hub 5-0:1.0: USB hub found
> > [    9.302794] hub 5-0:1.0: 2 ports detected
> > [    9.302992] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
> > [    9.302995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [    9.302997] usb usb6: Product: xHCI Host Controller
> > [    9.302998] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> > [    9.303000] usb usb6: SerialNumber: 0000:05:00.0
> > [    9.303557] hub 6-0:1.0: USB hub found
> > [    9.303567] hub 6-0:1.0: 2 ports detected
> > [    9.552443] usb 5-1: new high-speed USB device number 2 using xhci_hcd
> > [   10.130905] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > [   10.131029] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > [   10.131047] thunderbolt 0000:00:0d.2: bandwidth consumption changed, re-calculating estimated bandwidth
> > [   10.131051] thunderbolt 0000:00:0d.2: re-calculating bandwidth estimation for group 1
> > [   10.131198] thunderbolt 0000:00:0d.2: bandwidth estimation for group 1 done
> > [   10.131206] thunderbolt 0000:00:0d.2: bandwidth re-calculation done
> > [   10.131212] thunderbolt 0000:00:0d.2: 1: TMU: mode change uni-directional, LowRes -> uni-directional, HiFi requested
> > [   10.135515] thunderbolt 0000:00:0d.2: 1: TMU: mode set to: uni-directional, HiFi
> > [   10.136473] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> > [   10.136606] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> > [   10.136610] thunderbolt 0000:00:0d.2: 0:6: no suitable DP OUT adapter available, not tunneling
> > [   10.136743] thunderbolt 0000:00:0d.2: 1:11: DP OUT resource available after hotplug
> > [   10.136748] thunderbolt 0000:00:0d.2: looking for DP IN <-> DP OUT pairs:
> > [   10.136876] thunderbolt 0000:00:0d.2: 0:5: DP IN in use
> > [   10.137568] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> > [   10.137687] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> > [   10.137820] thunderbolt 0000:00:0d.2: 1:11: DP OUT available
> > [   10.139280] thunderbolt 0000:00:0d.2: 0: allocated DP resource for port 6
> > [   10.139286] thunderbolt 0000:00:0d.2: 0:6: attached to bandwidth group 1
> > [   10.139694] thunderbolt 0000:00:0d.2: 0:1: link maximum bandwidth 18000/18000 Mb/s
> > [   10.140680] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > [   10.140829] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > [   10.140963] thunderbolt 0000:00:0d.2: 1:1: link maximum bandwidth 18000/18000 Mb/s
> > [   10.141892] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > [   10.142027] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > [   10.142033] thunderbolt 0000:00:0d.2: available bandwidth for new DP tunnel 18000/720 Mb/s
> > [   10.142052] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): activating
> > [   10.143353] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
> > [   10.143360] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
> > [   10.143366] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): not enough bandwidth
> > [   10.143371] thunderbolt 0000:00:0d.2: 1:11: DP tunnel activation failed, aborting
> 
> However, the second DP tunnel fails because of no bandwidth.
> 
> > [   10.143489] thunderbolt 0000:00:0d.2: 0:6: detached from bandwidth group 1
> > [   10.144883] thunderbolt 0000:00:0d.2: 0: released DP resource for port 6
> > [   14.902955] usb 5-1: unable to get BOS descriptor set
> > [   14.906143] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
> > [   14.906167] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [   14.906175] usb 5-1: Product: USB2.1 Hub
> > [   14.906183] usb 5-1: Manufacturer: CalDigit, Inc.
> > [   14.908660] hub 5-1:1.0: USB hub found
> > [   14.909135] hub 5-1:1.0: 4 ports detected
> > [   15.026182] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
> > [   15.050199] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
> > [   15.050223] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [   15.050231] usb 6-1: Product: USB3.1 Gen2 Hub
> > [   15.050237] usb 6-1: Manufacturer: CalDigit, Inc.
> > [   15.053712] hub 6-1:1.0: USB hub found
> > [   15.054279] hub 6-1:1.0: 4 ports detected
> > [   15.215877] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
> > [   15.333676] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
> > [   15.333703] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [   15.333711] usb 5-1.4: Product: USB2.1 Hub
> > [   15.333718] usb 5-1.4: Manufacturer: CalDigit, Inc.
> > [   15.336484] hub 5-1.4:1.0: USB hub found
> > [   15.336797] hub 5-1.4:1.0: 4 ports detected
> > [   15.402943] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
> > [   15.425589] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
> > [   15.425615] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
> > [   15.425623] usb 6-1.1: Product: USB-C Pro Card Reader
> > [   15.425691] usb 6-1.1: Manufacturer: CalDigit
> > [   15.425697] usb 6-1.1: SerialNumber: 000000000006
> > [   15.432231] usb-storage 6-1.1:1.0: USB Mass Storage device detected
> > [   15.433690] scsi host0: usb-storage 6-1.1:1.0
> > [   15.506218] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
> > [   15.528220] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
> > [   15.528237] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [   15.528241] usb 6-1.4: Product: USB3.1 Gen1 Hub
> > [   15.528244] usb 6-1.4: Manufacturer: CalDigit, Inc.
> > [   15.531198] hub 6-1.4:1.0: USB hub found
> > [   15.531506] hub 6-1.4:1.0: 4 ports detected
> > [   15.649217] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
> > [   15.989548] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
> > [   16.007996] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
> > [   16.008021] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> > [   16.008029] usb 6-1.4.4: Product: USB 10/100/1000 LAN
> > [   16.008035] usb 6-1.4.4: Manufacturer: Realtek
> > [   16.008040] usb 6-1.4.4: SerialNumber: 001001000
> > [   16.090287] r8152-cfgselector 6-1.4.4: reset SuperSpeed USB device number 5 using xhci_hcd
> > [   16.136796] r8152 6-1.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
> > [   16.171430] r8152 6-1.4.4:1.0 eth0: v1.12.13
> > [   16.209513] r8152 6-1.4.4:1.0 enp5s0u1u4u4: renamed from eth0
> > [   16.453330] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
> > [   16.454420] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [   16.455908] sd 0:0:0:0: [sda] Media removed, stopped polling
> > [   16.457173] sd 0:0:0:0: [sda] Attached SCSI removable disk
> > [   16.497559] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
> > [   16.497567] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
> > [   16.497570] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
> > [   16.497572] usb 5-1.4.1: Manufacturer: CalDigit Inc.
> > [   16.920216] ucsi_acpi USBC000:00: possible UCSI driver bug 1
> > [   17.494492] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0005/input/input20
> > [   17.550258] hid-generic 0003:2188:4042.0005: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
> > [   19.609816] r8152 6-1.4.4:1.0 enp5s0u1u4u4: carrier on
> 
> All the USB devices seem to work fine (assuming I read this right).

To keep the log small I unplugged all USB devices from the dock.
But even if connected I don't have issues with them.

> 
> There is the DP tunneling limitation but other than that how the dock
> does not work? At least reading this log everything else seems to be
> fine except the second monitor?

Exactly only the second monitor is/was not working.

> 
> Now it is interesting why the link is only 20G and not 40G. I do have
> this same device and it gets the link up as 40G just fine:
> 
> [   17.867868] thunderbolt 0000:00:0d.2: 1: current link speed 20.0 Gb/s
> [   17.867869] thunderbolt 0000:00:0d.2: 1: current link width symmetric, single lane
> [   17.868437] thunderbolt 0000:00:0d.2: 0:1: total credits changed 120 -> 60
> [   17.868625] thunderbolt 0000:00:0d.2: 0:2: total credits changed 0 -> 60
> [   17.872472] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
> [   17.872608] thunderbolt 0-1: new device found, vendor=0x3d device=0x11
> [   17.879102] thunderbolt 0-1: CalDigit, Inc. TS3 Plus
> 

My dock is a little different model (see https://www.caldigit.com/usb-c-pro-dock/)
I don't have a CalDigit TS3 Plus.

> Do you use a Thunderbolt cable or some regular type-C one? There is the
> lightning symbol on the connector when it is Thunderbolt one.

The dock was connected with a Thunderbolt cable, that I used for a couple of years without any issues.
Based on the hint I replaced the cable and the issue is now gone for me.

I still don't understand why this happened as it was working great for years and is still working with kernels 6.8.7 or older.
But nevertheless sorry if I wasted time of anyone because of broken hardware.

Best Regards
Benjamin

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

In my case I use the official Thunderbolt cable that came with my
CalDigit TS3 Plus and yet the log - attached in a previous email -
says current link speed 10.0 Gb/s. I just tried a good quality USB4
cable too and nothing changed.

Maybe it's relevant to note that I'm using the Thunderbolt dock via
USB4 on a PC with an AMD Ryzen 7 7735HS.

On Mon, May 20, 2024 at 6:53 PM Benjamin Böhmke <benjamin@boehmke.net> wrote:
>
> On Monday, May 20, 2024 18:21 CEST, Mika Westerberg <mika.westerberg@linux.intel.com> wrote:
>
> > Hi,
> >
> > On Mon, May 20, 2024 at 05:12:40PM +0200, Benjamin Böhmke wrote:
> > > On Monday, May 20, 2024 16:41 CEST, Mario Limonciello <mario.limonciello@amd.com> wrote:
> > >
> > > > On 5/20/2024 09:39, Christian Heusel wrote:
> > > > > On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> > > > >> [CCing Mario, who asked for the two suspected commits to be backported]
> > > > >>
> > > > >> On 06.05.24 14:24, Gia wrote:
> > > > >>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> > > > >>> TS3 Plus Thunderbolt 3 dock.
> > > > >>>
> > > > >>> After the update I see this message on boot "xHCI host controller not
> > > > >>> responding, assume dead" and the dock is not working anymore. Kernel
> > > > >>> 6.8.7 works great.
> > > > >
> > > > > We now have some further information on the matter as somebody was kind
> > > > > enough to bisect the issue in the [Arch Linux Forums][0]:
> > > > >
> > > > >      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> > > > >
> > > > > This is a stable commit id, the relevant mainline commit is:
> > > > >
> > > > >      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> > > > >
> > > > > The other reporter created [a issue][1] in our bugtracker, which I'll
> > > > > leave here just for completeness sake.
> > > > >
> > > > > Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > > > Reported-by: Gia <giacomo.gio@gmail.com>
> > > > > Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> > > > >
> > > > > The person doing the bisection also offered to chime in here if further
> > > > > debugging is needed!
> > > > >
> > > > > Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> > > > >
> > > > > Cheers,
> > > > > Christian
> > > > >
> > > > > [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> > > > > [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > > > >
> > > > > #regzbot introduced: 59a54c5f3dbd
> > > > > #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> > > >
> > > > As I mentioned in my other email I would like to collate logs onto a
> > > > kernel Bugzilla.  With these two cases:
> > > >
> > > > thunderbolt.dyndbg=+p
> > > > thunderbolt.dyndbg=+p thunderbolt.host_reset=false
> > > >
> > > > Also what is the value for:
> > > >
> > > > $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> > >
> > > I attached the requested kernel logs as text files (hope this is ok).
> > > In both cases I used the stable ArchLinux kernel 6.9.1
> > >
> > > The iommu_dma_protection is both cases "1".
> > >
> > > Best Regards
> > > Benjamin
> >
> > After reset the link comes up just fine but there is one thing that I
> > noticed:
> >
> > > [    8.225355] thunderbolt 0-0:1.1: NVM version 7.0
> > > [    8.225360] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
> > > [    8.226410] thunderbolt 0000:00:0d.2: current switch config:
> > > [    8.226413] thunderbolt 0000:00:0d.2:  Thunderbolt 3 Switch: 8086:15ef (Revision: 6, TB Version: 16)
> > > [    8.226417] thunderbolt 0000:00:0d.2:   Max Port Number: 13
> > > [    8.226420] thunderbolt 0000:00:0d.2:   Config:
> > > [    8.226421] thunderbolt 0000:00:0d.2:    Upstream Port Number: 0 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
> > > [    8.226424] thunderbolt 0000:00:0d.2:    unknown1: 0x0 unknown4: 0x0
> > > [    8.227755] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
> > > [    8.234944] thunderbolt 0000:00:0d.2: initializing Switch at 0x1 (depth: 1, up port: 1)
> > > [    8.246755] thunderbolt 0000:00:0d.2: acking hot plug event on 1:2
> > > [    8.267378] thunderbolt 0000:00:0d.2: 1: reading DROM (length: 0x6d)
> > > [    8.879296] thunderbolt 0000:00:0d.2: 1: DROM version: 1
> > > [    8.880631] thunderbolt 0000:00:0d.2: 1: uid: 0x3d600630c86400
> > > [    8.884540] thunderbolt 0000:00:0d.2:  Port 1: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> > > [    8.884562] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> > > [    8.884564] thunderbolt 0000:00:0d.2:   Max counters: 16
> > > [    8.884566] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> > > [    8.884567] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> > > [    8.887782] thunderbolt 0000:00:0d.2:  Port 2: 8086:15ef (Revision: 6, TB Version: 1, Type: Port (0x1))
> > > [    8.887787] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 19/19
> > > [    8.887789] thunderbolt 0000:00:0d.2:   Max counters: 16
> > > [    8.887791] thunderbolt 0000:00:0d.2:   NFC Credits: 0x3c00000
> > > [    8.887792] thunderbolt 0000:00:0d.2:   Credits (total/control): 60/2
> > > [    8.887794] thunderbolt 0000:00:0d.2: 1:3: disabled by eeprom
> > > [    8.887795] thunderbolt 0000:00:0d.2: 1:4: disabled by eeprom
> > > [    8.887796] thunderbolt 0000:00:0d.2: 1:5: disabled by eeprom
> > > [    8.887797] thunderbolt 0000:00:0d.2: 1:6: disabled by eeprom
> > > [    8.887798] thunderbolt 0000:00:0d.2: 1:7: disabled by eeprom
> > > [    8.888053] thunderbolt 0000:00:0d.2:  Port 8: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100102))
> > > [    8.888056] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > > [    8.888057] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.888058] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.888059] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.888848] thunderbolt 0000:00:0d.2:  Port 9: 8086:15ef (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
> > > [    8.888850] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > > [    8.888851] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.888852] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.888852] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.889379] thunderbolt 0000:00:0d.2:  Port 10: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> > > [    8.889381] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> > > [    8.889382] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.889383] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.889384] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.890457] thunderbolt 0000:00:0d.2:  Port 11: 8086:15ef (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
> > > [    8.890459] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 9/9
> > > [    8.890460] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.890461] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.890462] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.890721] thunderbolt 0000:00:0d.2:  Port 12: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> > > [    8.890723] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > > [    8.890724] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.890725] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.890726] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.891534] thunderbolt 0000:00:0d.2:  Port 13: 8086:15ea (Revision: 6, TB Version: 1, Type: Inactive (0x0))
> > > [    8.891545] thunderbolt 0000:00:0d.2:   Max hop id (in/out): 8/8
> > > [    8.891551] thunderbolt 0000:00:0d.2:   Max counters: 2
> > > [    8.891557] thunderbolt 0000:00:0d.2:   NFC Credits: 0x800000
> > > [    8.891564] thunderbolt 0000:00:0d.2:   Credits (total/control): 8/0
> > > [    8.891825] thunderbolt 0000:00:0d.2: 1: current link speed 10.0 Gb/s
> >
> > Here it is 10G instead of 20G which limits the bandwidth available for
> > DP tunneling.
> >
> > ...
> >
> > > [    9.297112] pci 0000:05:00.0: [8086:15f0] type 00 class 0x0c0330 PCIe Endpoint
> > > [    9.297146] pci 0000:05:00.0: BAR 0 [mem 0x00000000-0x0000ffff]
> > > [    9.297249] pci 0000:05:00.0: enabling Extended Tags
> > > [    9.297479] pci 0000:05:00.0: supports D1 D2
> > > [    9.297481] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > > [    9.297717] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> >
> > The xHCI comes up just fine though.
> >
> > > [    9.300388] xhci_hcd 0000:05:00.0: xHCI Host Controller
> > > [    9.300397] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
> > > [    9.301802] xhci_hcd 0000:05:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
> > > [    9.302393] xhci_hcd 0000:05:00.0: xHCI Host Controller
> > > [    9.302398] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
> > > [    9.302401] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> > > [    9.302459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> > > [    9.302462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > > [    9.302465] usb usb5: Product: xHCI Host Controller
> > > [    9.302466] usb usb5: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> > > [    9.302468] usb usb5: SerialNumber: 0000:05:00.0
> > > [    9.302783] hub 5-0:1.0: USB hub found
> > > [    9.302794] hub 5-0:1.0: 2 ports detected
> > > [    9.302992] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
> > > [    9.302995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > > [    9.302997] usb usb6: Product: xHCI Host Controller
> > > [    9.302998] usb usb6: Manufacturer: Linux 6.9.1-arch1-1 xhci-hcd
> > > [    9.303000] usb usb6: SerialNumber: 0000:05:00.0
> > > [    9.303557] hub 6-0:1.0: USB hub found
> > > [    9.303567] hub 6-0:1.0: 2 ports detected
> > > [    9.552443] usb 5-1: new high-speed USB device number 2 using xhci_hcd
> > > [   10.130905] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > > [   10.131029] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > > [   10.131047] thunderbolt 0000:00:0d.2: bandwidth consumption changed, re-calculating estimated bandwidth
> > > [   10.131051] thunderbolt 0000:00:0d.2: re-calculating bandwidth estimation for group 1
> > > [   10.131198] thunderbolt 0000:00:0d.2: bandwidth estimation for group 1 done
> > > [   10.131206] thunderbolt 0000:00:0d.2: bandwidth re-calculation done
> > > [   10.131212] thunderbolt 0000:00:0d.2: 1: TMU: mode change uni-directional, LowRes -> uni-directional, HiFi requested
> > > [   10.135515] thunderbolt 0000:00:0d.2: 1: TMU: mode set to: uni-directional, HiFi
> > > [   10.136473] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> > > [   10.136606] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> > > [   10.136610] thunderbolt 0000:00:0d.2: 0:6: no suitable DP OUT adapter available, not tunneling
> > > [   10.136743] thunderbolt 0000:00:0d.2: 1:11: DP OUT resource available after hotplug
> > > [   10.136748] thunderbolt 0000:00:0d.2: looking for DP IN <-> DP OUT pairs:
> > > [   10.136876] thunderbolt 0000:00:0d.2: 0:5: DP IN in use
> > > [   10.137568] thunderbolt 0000:00:0d.2: 0:6: DP IN available
> > > [   10.137687] thunderbolt 0000:00:0d.2: 1:10: DP OUT in use
> > > [   10.137820] thunderbolt 0000:00:0d.2: 1:11: DP OUT available
> > > [   10.139280] thunderbolt 0000:00:0d.2: 0: allocated DP resource for port 6
> > > [   10.139286] thunderbolt 0000:00:0d.2: 0:6: attached to bandwidth group 1
> > > [   10.139694] thunderbolt 0000:00:0d.2: 0:1: link maximum bandwidth 18000/18000 Mb/s
> > > [   10.140680] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > > [   10.140829] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > > [   10.140963] thunderbolt 0000:00:0d.2: 1:1: link maximum bandwidth 18000/18000 Mb/s
> > > [   10.141892] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): DPRX read done
> > > [   10.142027] thunderbolt 0000:00:0d.2: 0:5 <-> 1:10 (DP): consumed bandwidth 0/17280 Mb/s
> > > [   10.142033] thunderbolt 0000:00:0d.2: available bandwidth for new DP tunnel 18000/720 Mb/s
> > > [   10.142052] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): activating
> > > [   10.143353] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
> > > [   10.143360] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): DP OUT maximum supported bandwidth 5400 Mb/s x4 = 17280 Mb/s
> > > [   10.143366] thunderbolt 0000:00:0d.2: 0:6 <-> 1:11 (DP): not enough bandwidth
> > > [   10.143371] thunderbolt 0000:00:0d.2: 1:11: DP tunnel activation failed, aborting
> >
> > However, the second DP tunnel fails because of no bandwidth.
> >
> > > [   10.143489] thunderbolt 0000:00:0d.2: 0:6: detached from bandwidth group 1
> > > [   10.144883] thunderbolt 0000:00:0d.2: 0: released DP resource for port 6
> > > [   14.902955] usb 5-1: unable to get BOS descriptor set
> > > [   14.906143] usb 5-1: New USB device found, idVendor=2188, idProduct=0610, bcdDevice=70.42
> > > [   14.906167] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > > [   14.906175] usb 5-1: Product: USB2.1 Hub
> > > [   14.906183] usb 5-1: Manufacturer: CalDigit, Inc.
> > > [   14.908660] hub 5-1:1.0: USB hub found
> > > [   14.909135] hub 5-1:1.0: 4 ports detected
> > > [   15.026182] usb 6-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
> > > [   15.050199] usb 6-1: New USB device found, idVendor=2188, idProduct=0625, bcdDevice=70.42
> > > [   15.050223] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > > [   15.050231] usb 6-1: Product: USB3.1 Gen2 Hub
> > > [   15.050237] usb 6-1: Manufacturer: CalDigit, Inc.
> > > [   15.053712] hub 6-1:1.0: USB hub found
> > > [   15.054279] hub 6-1:1.0: 4 ports detected
> > > [   15.215877] usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
> > > [   15.333676] usb 5-1.4: New USB device found, idVendor=2188, idProduct=0611, bcdDevice=93.06
> > > [   15.333703] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > > [   15.333711] usb 5-1.4: Product: USB2.1 Hub
> > > [   15.333718] usb 5-1.4: Manufacturer: CalDigit, Inc.
> > > [   15.336484] hub 5-1.4:1.0: USB hub found
> > > [   15.336797] hub 5-1.4:1.0: 4 ports detected
> > > [   15.402943] usb 6-1.1: new SuperSpeed USB device number 3 using xhci_hcd
> > > [   15.425589] usb 6-1.1: New USB device found, idVendor=2188, idProduct=0754, bcdDevice= 0.06
> > > [   15.425615] usb 6-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
> > > [   15.425623] usb 6-1.1: Product: USB-C Pro Card Reader
> > > [   15.425691] usb 6-1.1: Manufacturer: CalDigit
> > > [   15.425697] usb 6-1.1: SerialNumber: 000000000006
> > > [   15.432231] usb-storage 6-1.1:1.0: USB Mass Storage device detected
> > > [   15.433690] scsi host0: usb-storage 6-1.1:1.0
> > > [   15.506218] usb 6-1.4: new SuperSpeed USB device number 4 using xhci_hcd
> > > [   15.528220] usb 6-1.4: New USB device found, idVendor=2188, idProduct=0620, bcdDevice=93.06
> > > [   15.528237] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > > [   15.528241] usb 6-1.4: Product: USB3.1 Gen1 Hub
> > > [   15.528244] usb 6-1.4: Manufacturer: CalDigit, Inc.
> > > [   15.531198] hub 6-1.4:1.0: USB hub found
> > > [   15.531506] hub 6-1.4:1.0: 4 ports detected
> > > [   15.649217] usb 5-1.4.1: new high-speed USB device number 4 using xhci_hcd
> > > [   15.989548] usb 6-1.4.4: new SuperSpeed USB device number 5 using xhci_hcd
> > > [   16.007996] usb 6-1.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
> > > [   16.008021] usb 6-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> > > [   16.008029] usb 6-1.4.4: Product: USB 10/100/1000 LAN
> > > [   16.008035] usb 6-1.4.4: Manufacturer: Realtek
> > > [   16.008040] usb 6-1.4.4: SerialNumber: 001001000
> > > [   16.090287] r8152-cfgselector 6-1.4.4: reset SuperSpeed USB device number 5 using xhci_hcd
> > > [   16.136796] r8152 6-1.4.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
> > > [   16.171430] r8152 6-1.4.4:1.0 eth0: v1.12.13
> > > [   16.209513] r8152 6-1.4.4:1.0 enp5s0u1u4u4: renamed from eth0
> > > [   16.453330] scsi 0:0:0:0: Direct-Access     CalDigit SD Card Reader   0006 PQ: 0 ANSI: 6
> > > [   16.454420] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > > [   16.455908] sd 0:0:0:0: [sda] Media removed, stopped polling
> > > [   16.457173] sd 0:0:0:0: [sda] Attached SCSI removable disk
> > > [   16.497559] usb 5-1.4.1: New USB device found, idVendor=2188, idProduct=4042, bcdDevice= 0.06
> > > [   16.497567] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
> > > [   16.497570] usb 5-1.4.1: Product: CalDigit USB-C Pro Audio
> > > [   16.497572] usb 5-1.4.1: Manufacturer: CalDigit Inc.
> > > [   16.920216] ucsi_acpi USBC000:00: possible UCSI driver bug 1
> > > [   17.494492] input: CalDigit Inc. CalDigit USB-C Pro Audio as /devices/pci0000:00/0000:00:07.0/0000:03:00.0/0000:04:02.0/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.3/0003:2188:4042.0005/input/input20
> > > [   17.550258] hid-generic 0003:2188:4042.0005: input,hidraw2: USB HID v1.11 Device [CalDigit Inc. CalDigit USB-C Pro Audio] on usb-0000:05:00.0-1.4.1/input3
> > > [   19.609816] r8152 6-1.4.4:1.0 enp5s0u1u4u4: carrier on
> >
> > All the USB devices seem to work fine (assuming I read this right).
>
> To keep the log small I unplugged all USB devices from the dock.
> But even if connected I don't have issues with them.
>
> >
> > There is the DP tunneling limitation but other than that how the dock
> > does not work? At least reading this log everything else seems to be
> > fine except the second monitor?
>
> Exactly only the second monitor is/was not working.
>
> >
> > Now it is interesting why the link is only 20G and not 40G. I do have
> > this same device and it gets the link up as 40G just fine:
> >
> > [   17.867868] thunderbolt 0000:00:0d.2: 1: current link speed 20.0 Gb/s
> > [   17.867869] thunderbolt 0000:00:0d.2: 1: current link width symmetric, single lane
> > [   17.868437] thunderbolt 0000:00:0d.2: 0:1: total credits changed 120 -> 60
> > [   17.868625] thunderbolt 0000:00:0d.2: 0:2: total credits changed 0 -> 60
> > [   17.872472] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
> > [   17.872608] thunderbolt 0-1: new device found, vendor=0x3d device=0x11
> > [   17.879102] thunderbolt 0-1: CalDigit, Inc. TS3 Plus
> >
>
> My dock is a little different model (see https://www.caldigit.com/usb-c-pro-dock/)
> I don't have a CalDigit TS3 Plus.
>
> > Do you use a Thunderbolt cable or some regular type-C one? There is the
> > lightning symbol on the connector when it is Thunderbolt one.
>
> The dock was connected with a Thunderbolt cable, that I used for a couple of years without any issues.
> Based on the hint I replaced the cable and the issue is now gone for me.
>
> I still don't understand why this happened as it was working great for years and is still working with kernels 6.8.7 or older.
> But nevertheless sorry if I wasted time of anyone because of broken hardware.
>
> Best Regards
> Benjamin
>

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

Hi,

On Mon, May 20, 2024 at 07:30:28PM +0200, Gia wrote:
> In my case I use the official Thunderbolt cable that came with my
> CalDigit TS3 Plus and yet the log - attached in a previous email -
> says current link speed 10.0 Gb/s. I just tried a good quality USB4
> cable too and nothing changed.

I will take a look at your logs today but in the meantime can you run
following command on the system with the dock connected?

  # tbdump -r 0 -a 1 -vv -N 2 LANE_ADP_CS_0

Here tbdump comes from https://github.com/intel/tbtools. It should be
pretty straighforward to build but let me know if any issues
(unfortunately there is no binary package available at this time).

The '-a 1' should match the adapter the dock is connected. You can get
it for instance like this (this is an example from my system):

  # tblist
  Domain 0 Route 0: 8087:7eb2 Intel Gen14
  Domain 0 Route 1: 003d:0011 CalDigit, Inc. TS3 Plus
  Domain 1 Route 0: 8087:7eb2 Intel Gen14

Here the CalDigit has "Route 1" so it means I use "-a 1" above. It could
be also "Domain 0 Route 3" in which case replace the "-a 1" with "-a 3".

This command should dump two lane adapter registers LANE_ADP_CS_0/1 that
show the link capabilities.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

Here you go:

0x0080 0x003c01c0 0b00000000 00111100 00000001 11000000 .... LANE_ADP_CS_0
  [00:07]       0xc0 Next Capability Pointer
  [08:15]        0x1 Capability ID
  [16:19]        0xc Supported Link Speeds
  [20:21]        0x3 Supported Link Widths (SLW)
  [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
  [26:26]        0x0 CL0s Support
  [27:27]        0x0 CL1 Support
  [28:28]        0x0 CL2 Support
0x0081 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
  [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
  [04:05]        0x3 Target Link Width → Establish a Symmetric Link
  [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
  [10:10]        0x0 CL0s Enable
  [11:11]        0x0 CL1 Enable
  [12:12]        0x0 CL2 Enable
  [14:14]        0x0 Lane Disable (LD)
  [15:15]        0x0 Lane Bonding (LB)
  [16:19]        0x8 Current Link Speed → Gen 2
  [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
  [26:29]        0x2 Adapter State → CL0
  [30:30]        0x0 PM Secondary (PMS)

On Tue, May 21, 2024 at 7:11 AM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> Hi,
>
> On Mon, May 20, 2024 at 07:30:28PM +0200, Gia wrote:
> > In my case I use the official Thunderbolt cable that came with my
> > CalDigit TS3 Plus and yet the log - attached in a previous email -
> > says current link speed 10.0 Gb/s. I just tried a good quality USB4
> > cable too and nothing changed.
>
> I will take a look at your logs today but in the meantime can you run
> following command on the system with the dock connected?
>
>   # tbdump -r 0 -a 1 -vv -N 2 LANE_ADP_CS_0
>
> Here tbdump comes from https://github.com/intel/tbtools. It should be
> pretty straighforward to build but let me know if any issues
> (unfortunately there is no binary package available at this time).
>
> The '-a 1' should match the adapter the dock is connected. You can get
> it for instance like this (this is an example from my system):
>
>   # tblist
>   Domain 0 Route 0: 8087:7eb2 Intel Gen14
>   Domain 0 Route 1: 003d:0011 CalDigit, Inc. TS3 Plus
>   Domain 1 Route 0: 8087:7eb2 Intel Gen14
>
> Here the CalDigit has "Route 1" so it means I use "-a 1" above. It could
> be also "Domain 0 Route 3" in which case replace the "-a 1" with "-a 3".
>
> This command should dump two lane adapter registers LANE_ADP_CS_0/1 that
> show the link capabilities.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

On Tue, May 21, 2024 at 10:15:28AM +0200, Gia wrote:
> Here you go:
> 
> 0x0080 0x003c01c0 0b00000000 00111100 00000001 11000000 .... LANE_ADP_CS_0
>   [00:07]       0xc0 Next Capability Pointer
>   [08:15]        0x1 Capability ID
>   [16:19]        0xc Supported Link Speeds
>   [20:21]        0x3 Supported Link Widths (SLW)
>   [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
>   [26:26]        0x0 CL0s Support
>   [27:27]        0x0 CL1 Support
>   [28:28]        0x0 CL2 Support
> 0x0081 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
>   [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
>   [04:05]        0x3 Target Link Width → Establish a Symmetric Link
>   [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
>   [10:10]        0x0 CL0s Enable
>   [11:11]        0x0 CL1 Enable
>   [12:12]        0x0 CL2 Enable
>   [14:14]        0x0 Lane Disable (LD)
>   [15:15]        0x0 Lane Bonding (LB)
>   [16:19]        0x8 Current Link Speed → Gen 2
>   [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
>   [26:29]        0x2 Adapter State → CL0
>   [30:30]        0x0 PM Secondary (PMS)

Thanks this looks fine (although the link is still Gen 2). Can you run
the same from the dock upstream port too?

  # tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

Here you have the output from the dock upstream port:

sudo tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0

0x0036 0x003c013e 0b00000000 00111100 00000001 00111110 .... LANE_ADP_CS_0
  [00:07]       0x3e Next Capability Pointer
  [08:15]        0x1 Capability ID
  [16:19]        0xc Supported Link Speeds
  [20:21]        0x3 Supported Link Widths (SLW)
  [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
  [26:26]        0x0 CL0s Support
  [27:27]        0x0 CL1 Support
  [28:28]        0x0 CL2 Support
0x0037 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
  [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
  [04:05]        0x3 Target Link Width → Establish a Symmetric Link
  [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
  [10:10]        0x0 CL0s Enable
  [11:11]        0x0 CL1 Enable
  [12:12]        0x0 CL2 Enable
  [14:14]        0x0 Lane Disable (LD)
  [15:15]        0x0 Lane Bonding (LB)
  [16:19]        0x8 Current Link Speed → Gen 2
  [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
  [26:29]        0x2 Adapter State → CL0
  [30:30]        0x0 PM Secondary (PMS)

On Tue, May 21, 2024 at 10:59 AM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> On Tue, May 21, 2024 at 10:15:28AM +0200, Gia wrote:
> > Here you go:
> >
> > 0x0080 0x003c01c0 0b00000000 00111100 00000001 11000000 .... LANE_ADP_CS_0
> >   [00:07]       0xc0 Next Capability Pointer
> >   [08:15]        0x1 Capability ID
> >   [16:19]        0xc Supported Link Speeds
> >   [20:21]        0x3 Supported Link Widths (SLW)
> >   [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
> >   [26:26]        0x0 CL0s Support
> >   [27:27]        0x0 CL1 Support
> >   [28:28]        0x0 CL2 Support
> > 0x0081 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
> >   [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
> >   [04:05]        0x3 Target Link Width → Establish a Symmetric Link
> >   [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
> >   [10:10]        0x0 CL0s Enable
> >   [11:11]        0x0 CL1 Enable
> >   [12:12]        0x0 CL2 Enable
> >   [14:14]        0x0 Lane Disable (LD)
> >   [15:15]        0x0 Lane Bonding (LB)
> >   [16:19]        0x8 Current Link Speed → Gen 2
> >   [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
> >   [26:29]        0x2 Adapter State → CL0
> >   [30:30]        0x0 PM Secondary (PMS)
>
> Thanks this looks fine (although the link is still Gen 2). Can you run
> the same from the dock upstream port too?
>
>   # tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

On Tue, May 21, 2024 at 11:12:10AM +0200, Gia wrote:
> Here you have the output from the dock upstream port:
> 
> sudo tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0
> 
> 0x0036 0x003c013e 0b00000000 00111100 00000001 00111110 .... LANE_ADP_CS_0
>   [00:07]       0x3e Next Capability Pointer
>   [08:15]        0x1 Capability ID
>   [16:19]        0xc Supported Link Speeds
>   [20:21]        0x3 Supported Link Widths (SLW)
>   [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
>   [26:26]        0x0 CL0s Support
>   [27:27]        0x0 CL1 Support
>   [28:28]        0x0 CL2 Support
> 0x0037 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
>   [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
>   [04:05]        0x3 Target Link Width → Establish a Symmetric Link
>   [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
>   [10:10]        0x0 CL0s Enable
>   [11:11]        0x0 CL1 Enable
>   [12:12]        0x0 CL2 Enable
>   [14:14]        0x0 Lane Disable (LD)
>   [15:15]        0x0 Lane Bonding (LB)
>   [16:19]        0x8 Current Link Speed → Gen 2
>   [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
>   [26:29]        0x2 Adapter State → CL0
>   [30:30]        0x0 PM Secondary (PMS)

Hmm, okay both sides announce support of Gen3 yet the link is Gen2 which
makes me still suspect the cable, or the connection in general. I
suggest, if you have, try with another Thunderbolt cable.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

[-- Attachment #1: Type: text/plain, Size: 2250 bytes --]

Now this is odd...

I've tested another cable - a very short one used with a Gen3 nvme
enclosure that I'm sure it's working - and I got Gen2 20 Gbps. I also
have tested this on Windows 11 and I still just got a Gen2 connection.

I was almost sure it was caused by a bad USB4 implementation by the PC
manufacturer, then I tried to connect a Thunderbolt 3 disk enclosure
via daisy chain to the Caldigit dock and I got the full Gen3 40 Gbps
connection! See the attached picture.

I'll try to connect the dock to a laptop via Thunderbolt 3 as a last
test and I'll report back.



On Tue, May 21, 2024 at 1:26 PM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> On Tue, May 21, 2024 at 11:12:10AM +0200, Gia wrote:
> > Here you have the output from the dock upstream port:
> >
> > sudo tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0
> >
> > 0x0036 0x003c013e 0b00000000 00111100 00000001 00111110 .... LANE_ADP_CS_0
> >   [00:07]       0x3e Next Capability Pointer
> >   [08:15]        0x1 Capability ID
> >   [16:19]        0xc Supported Link Speeds
> >   [20:21]        0x3 Supported Link Widths (SLW)
> >   [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
> >   [26:26]        0x0 CL0s Support
> >   [27:27]        0x0 CL1 Support
> >   [28:28]        0x0 CL2 Support
> > 0x0037 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
> >   [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
> >   [04:05]        0x3 Target Link Width → Establish a Symmetric Link
> >   [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
> >   [10:10]        0x0 CL0s Enable
> >   [11:11]        0x0 CL1 Enable
> >   [12:12]        0x0 CL2 Enable
> >   [14:14]        0x0 Lane Disable (LD)
> >   [15:15]        0x0 Lane Bonding (LB)
> >   [16:19]        0x8 Current Link Speed → Gen 2
> >   [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
> >   [26:29]        0x2 Adapter State → CL0
> >   [30:30]        0x0 PM Secondary (PMS)
>
> Hmm, okay both sides announce support of Gen3 yet the link is Gen2 which
> makes me still suspect the cable, or the connection in general. I
> suggest, if you have, try with another Thunderbolt cable.

[-- Attachment #2: CaldigitTS3Plus_Win11_link_speed.jpg --]
[-- Type: image/jpeg, Size: 385686 bytes --]

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mario Limonciello]

On 5/22/2024 09:41, Gia wrote:
> Now this is odd...
> 
> I've tested another cable - a very short one used with a Gen3 nvme
> enclosure that I'm sure it's working - and I got Gen2 20 Gbps. I also
> have tested this on Windows 11 and I still just got a Gen2 connection.
> 
> I was almost sure it was caused by a bad USB4 implementation by the PC
> manufacturer, then I tried to connect a Thunderbolt 3 disk enclosure
> via daisy chain to the Caldigit dock and I got the full Gen3 40 Gbps
> connection! See the attached picture.
> 

I suspect you can't actually get Gen 3 performance in this 
configuration.  IIUC you should still be limited by the uplink to the host.

Those are some really odd findings but it's at least good it's 
"consistent" between Windows and Linux.

I'd suggest you report this to your manufacturer to investigate.  Sanath 
can keep me honest I don't believe we've seen this problem on the 
reference stuff.

> I'll try to connect the dock to a laptop via Thunderbolt 3 as a last
> test and I'll report back.
> 
> 
> 
> On Tue, May 21, 2024 at 1:26 PM Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
>>
>> On Tue, May 21, 2024 at 11:12:10AM +0200, Gia wrote:
>>> Here you have the output from the dock upstream port:
>>>
>>> sudo tbdump -r 2 -a 1 -vv -N2 LANE_ADP_CS_0
>>>
>>> 0x0036 0x003c013e 0b00000000 00111100 00000001 00111110 .... LANE_ADP_CS_0
>>>    [00:07]       0x3e Next Capability Pointer
>>>    [08:15]        0x1 Capability ID
>>>    [16:19]        0xc Supported Link Speeds
>>>    [20:21]        0x3 Supported Link Widths (SLW)
>>>    [22:23]        0x0 Gen 4 Asymmetric Support (G4AS)
>>>    [26:26]        0x0 CL0s Support
>>>    [27:27]        0x0 CL1 Support
>>>    [28:28]        0x0 CL2 Support
>>> 0x0037 0x0828003c 0b00001000 00101000 00000000 00111100 .... LANE_ADP_CS_1
>>>    [00:03]        0xc Target Link Speed → Router shall attempt Gen 3 speed
>>>    [04:05]        0x3 Target Link Width → Establish a Symmetric Link
>>>    [06:07]        0x0 Target Asymmetric Link → Establish Symmetric Link
>>>    [10:10]        0x0 CL0s Enable
>>>    [11:11]        0x0 CL1 Enable
>>>    [12:12]        0x0 CL2 Enable
>>>    [14:14]        0x0 Lane Disable (LD)
>>>    [15:15]        0x0 Lane Bonding (LB)
>>>    [16:19]        0x8 Current Link Speed → Gen 2
>>>    [20:25]        0x2 Negotiated Link Width → Symmetric Link (x2)
>>>    [26:29]        0x2 Adapter State → CL0
>>>    [30:30]        0x0 PM Secondary (PMS)
>>
>> Hmm, okay both sides announce support of Gen3 yet the link is Gen2 which
>> makes me still suspect the cable, or the connection in general. I
>> suggest, if you have, try with another Thunderbolt cable.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

On Wed, May 22, 2024 at 10:19:51AM -0500, Mario Limonciello wrote:
> On 5/22/2024 09:41, Gia wrote:
> > Now this is odd...
> > 
> > I've tested another cable - a very short one used with a Gen3 nvme
> > enclosure that I'm sure it's working - and I got Gen2 20 Gbps. I also
> > have tested this on Windows 11 and I still just got a Gen2 connection.
> > 
> > I was almost sure it was caused by a bad USB4 implementation by the PC
> > manufacturer, then I tried to connect a Thunderbolt 3 disk enclosure
> > via daisy chain to the Caldigit dock and I got the full Gen3 40 Gbps
> > connection! See the attached picture.
> > 
> 
> I suspect you can't actually get Gen 3 performance in this configuration.
> IIUC you should still be limited by the uplink to the host.

One "explanation" could be that the distance from the SoC to the Type-C
connector is relatively long which would require a retimer to get the
Gen3 speeds.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

Hi,

On Mon, May 20, 2024 at 06:53:18PM +0200, Benjamin Böhmke wrote:
> > All the USB devices seem to work fine (assuming I read this right).
> 
> To keep the log small I unplugged all USB devices from the dock.
> But even if connected I don't have issues with them.

Okay that's good to know.

Yeah, in the dmesg it might seem odd that the xHCI is "gone" for a while
as we do USB4 topology reset but it comes back after the tunnels get
re-created.

> > There is the DP tunneling limitation but other than that how the dock
> > does not work? At least reading this log everything else seems to be
> > fine except the second monitor?
> 
> Exactly only the second monitor is/was not working.

Got it.

> > Now it is interesting why the link is only 20G and not 40G. I do have
> > this same device and it gets the link up as 40G just fine:
> > 
> > [   17.867868] thunderbolt 0000:00:0d.2: 1: current link speed 20.0 Gb/s
> > [   17.867869] thunderbolt 0000:00:0d.2: 1: current link width symmetric, single lane
> > [   17.868437] thunderbolt 0000:00:0d.2: 0:1: total credits changed 120 -> 60
> > [   17.868625] thunderbolt 0000:00:0d.2: 0:2: total credits changed 0 -> 60
> > [   17.872472] thunderbolt 0000:00:0d.2: 1: TMU: current mode: bi-directional, HiFi
> > [   17.872608] thunderbolt 0-1: new device found, vendor=0x3d device=0x11
> > [   17.879102] thunderbolt 0-1: CalDigit, Inc. TS3 Plus
> > 
> 
> My dock is a little different model (see https://www.caldigit.com/usb-c-pro-dock/)
> I don't have a CalDigit TS3 Plus.

Indeed, my mistake.

> > Do you use a Thunderbolt cable or some regular type-C one? There is the
> > lightning symbol on the connector when it is Thunderbolt one.
> 
> The dock was connected with a Thunderbolt cable, that I used for a
> couple of years without any issues. Based on the hint I replaced the
> cable and the issue is now gone for me.
> 
> I still don't understand why this happened as it was working great for
> years and is still working with kernels 6.8.7 or older. But
> nevertheless sorry if I wasted time of anyone because of broken
> hardware.

I think the BIOS CM creates the "first" tunnel using reduced
capabilities already so this makes the "second" tunnel fit there in the
18G link. Now that we do the reset the "first" tunnel is re-created with
max capabilities and that makes the "second" not to fit there anymore.

But now you get the full 40G link :)

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Limonciello, Mario]

>> I still don't understand why this happened as it was working great for
>> years and is still working with kernels 6.8.7 or older. But
>> nevertheless sorry if I wasted time of anyone because of broken
>> hardware.
> 
> I think the BIOS CM creates the "first" tunnel using reduced
> capabilities already so this makes the "second" tunnel fit there in the
> 18G link. Now that we do the reset the "first" tunnel is re-created with
> max capabilities and that makes the "second" not to fit there anymore.
> 
> But now you get the full 40G link :)

Well that's awesome!  That confirms there were other issues besides the 
one Sanath found that get fixed by not reusing BIOS tunnels.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

Hi Mario,

In my case in both cases the value for:

$ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection

is 0.

Output of sudo journalctl -k with kernel option thunderbolt.dyndbg=+p:
https://codeshare.io/qAXLoj

Output of sudo dmesg with kernel option thunderbolt.dyndbg=+p:
https://codeshare.io/zlPgRb

Output of sudo journalctl -k with kernel options thunderbolt.dyndbg=+p
thunderbolt.host_reset=false:
https://codeshare.io/Lj3rPV

Output of sudo dmesg with kernel option thunderbolt.dyndbg=+p
thunderbolt.host_reset=false:
https://codeshare.io/beQw36

Best

Giacomo

On Mon, May 20, 2024 at 4:41 PM Mario Limonciello
<mario.limonciello@amd.com> wrote:
>
> On 5/20/2024 09:39, Christian Heusel wrote:
> > On 24/05/06 02:53PM, Linux regression tracking (Thorsten Leemhuis) wrote:
> >> [CCing Mario, who asked for the two suspected commits to be backported]
> >>
> >> On 06.05.24 14:24, Gia wrote:
> >>> Hello, from 6.8.7=>6.8.8 I run into a similar problem with my Caldigit
> >>> TS3 Plus Thunderbolt 3 dock.
> >>>
> >>> After the update I see this message on boot "xHCI host controller not
> >>> responding, assume dead" and the dock is not working anymore. Kernel
> >>> 6.8.7 works great.
> >
> > We now have some further information on the matter as somebody was kind
> > enough to bisect the issue in the [Arch Linux Forums][0]:
> >
> >      cc4c94a5f6c4 ("thunderbolt: Reset topology created by the boot firmware")
> >
> > This is a stable commit id, the relevant mainline commit is:
> >
> >      59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
> >
> > The other reporter created [a issue][1] in our bugtracker, which I'll
> > leave here just for completeness sake.
> >
> > Reported-by: Benjamin Böhmke <benjamin@boehmke.net>
> > Reported-by: Gia <giacomo.gio@gmail.com>
> > Bisected-by: Benjamin Böhmke <benjamin@boehmke.net>
> >
> > The person doing the bisection also offered to chime in here if further
> > debugging is needed!
> >
> > Also CC'ing the Commitauthors & Subsystem Maintainers for this report.
> >
> > Cheers,
> > Christian
> >
> > [0]: https://bbs.archlinux.org/viewtopic.php?pid=2172526
> > [1]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
> >
> > #regzbot introduced: 59a54c5f3dbd
> > #regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/48
>
> As I mentioned in my other email I would like to collate logs onto a
> kernel Bugzilla.  With these two cases:
>
> thunderbolt.dyndbg=+p
> thunderbolt.dyndbg=+p thunderbolt.host_reset=false
>
> Also what is the value for:
>
> $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

Hi,

On Mon, May 20, 2024 at 05:57:42PM +0200, Gia wrote:
> Hi Mario,
> 
> In my case in both cases the value for:
> 
> $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> 
> is 0.
> 
> Output of sudo journalctl -k with kernel option thunderbolt.dyndbg=+p:
> https://codeshare.io/qAXLoj
> 
> Output of sudo dmesg with kernel option thunderbolt.dyndbg=+p:
> https://codeshare.io/zlPgRb

I see you have "pcie_aspm=off" in the kernel command line. That kind of
affects things. Can you drop that and see if it changes anything? And
also provide a new full dmesg with "thunderbolt.dyndbg=+p" in the
command line (dropping pcie_aspm_off)?

Also is there any particular reason you have it there?

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

Thank you Mika,

Here you have the output of sudo journalctl -k without enabling the
kernel option "pcie_aspm=off": https://codeshare.io/7JPgpE. Without
"pcie_aspm=off", "thunderbolt.host_reset=false" is not needed, my
thunderbolt dock does work. I also connected a 4k monitor to the
thunderbolt dock thinking it could provide more data.

I'm almost sure I used this option when I set up this system because
it solved some issues with system suspending, but it happened many
months ago.



On Tue, May 21, 2024 at 7:15 AM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> Hi,
>
> On Mon, May 20, 2024 at 05:57:42PM +0200, Gia wrote:
> > Hi Mario,
> >
> > In my case in both cases the value for:
> >
> > $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> >
> > is 0.
> >
> > Output of sudo journalctl -k with kernel option thunderbolt.dyndbg=+p:
> > https://codeshare.io/qAXLoj
> >
> > Output of sudo dmesg with kernel option thunderbolt.dyndbg=+p:
> > https://codeshare.io/zlPgRb
>
> I see you have "pcie_aspm=off" in the kernel command line. That kind of
> affects things. Can you drop that and see if it changes anything? And
> also provide a new full dmesg with "thunderbolt.dyndbg=+p" in the
> command line (dropping pcie_aspm_off)?
>
> Also is there any particular reason you have it there?

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

Hi,

On Tue, May 21, 2024 at 10:07:23AM +0200, Gia wrote:
> Thank you Mika,
> 
> Here you have the output of sudo journalctl -k without enabling the
> kernel option "pcie_aspm=off": https://codeshare.io/7JPgpE. Without
> "pcie_aspm=off", "thunderbolt.host_reset=false" is not needed, my
> thunderbolt dock does work. I also connected a 4k monitor to the
> thunderbolt dock thinking it could provide more data.
> 
> I'm almost sure I used this option when I set up this system because
> it solved some issues with system suspending, but it happened many
> months ago.

Okay. I recommend not to use it. The defaults should always be the best
option (unless you really know what you are doing or working around some
issue).

The dmesg you shared looks good, there are few oddities but they should
not matter from functional perspective (unless you are planning to have
a second monitor connected).

First is this:

  May 21 09:59:40 um773arch kernel: thunderbolt 0000:36:00.5: IOMMU DMA protection is disabled

It should really be enabled but I'm not familiar with AMD hardware to
tell more so hoping Mario can comment on that.

The second thing is the USB4 link that seems to be degraded to 2x10G =
20G even though you say it is a Thunderbolt cable. I'll comment more on
that in the other email.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Gia]

Thank you for your suggestion Mika, as a general rule I totally agree
with you and I do not mess with kernel default parameters, but I
remember "pcie_aspm=off" was necessary at the time I set up the
system. Probably a kernel or a BIOS update makes it unnecessary today.

I see it removes these messages from my logs but I trust you when you
say they have not an impact on functionality:

May 21 11:01:36 um773arch kernel: pcieport 0000:05:04.0: Unable to
change power state from D3hot to D0, device inaccessible
May 21 11:01:36 um773arch kernel: igb 0000:09:00.0 eth0: PCIe link lost
May 21 11:01:36 um773arch kernel: xhci_hcd 0000:08:00.0: xHCI host
controller not responding, assume dead
May 21 11:01:36 um773arch kernel: xhci_hcd 0000:07:00.0: xHCI host
controller not responding, assume dead
May 21 11:01:36 um773arch kernel: usb 3-1: 1:1: cannot set freq 48000 to ep 0x82
May 21 11:01:36 um773arch kernel: usb 3-1: 10:0: cannot get min/max
values for control 2 (id 10)
May 21 11:01:41 um773arch kernel: xhci_hcd 0000:06:00.0: xHCI host
controller not responding, assume dead
May 21 11:01:41 um773arch kernel: xhci_hcd 0000:06:00.0: HC died; cleaning up
May 21 11:01:41 um773arch kernel: usb 1-2: 1:1: cannot set freq 48000 to ep 0x1
May 21 11:01:41 um773arch kernel: usb 1-2: 1:2: cannot set freq 48000 to ep 0x1
May 21 11:01:41 um773arch kernel: usb 1-2: 1:3: cannot set freq 96000 to ep 0x1
May 21 11:01:41 um773arch kernel: usb 1-2: 1:4: cannot set freq 96000 to ep 0x1
May 21 11:01:41 um773arch kernel: usb 1-2: 1:5: cannot set freq 48000 to ep 0x1
May 21 11:01:41 um773arch kernel: usb 1-2: 2:1: cannot set freq 48000 to ep 0x82
May 21 11:01:41 um773arch kernel: usb 1-2: 7:0: cannot get min/max
values for control 2 (id 7)
May 21 11:01:41 um773arch kernel: usb 1-2: 5:0: cannot get min/max
values for control 2 (id 5)
May 21 11:01:41 um773arch kernel: usb 1-2: 6:0: cannot get min/max
values for control 2 (id 6)
May 21 11:01:41 um773arch (udev-worker)[453]: controlC0:
/usr/lib/udev/rules.d/78-sound-card.rules:5 Failed to write
ATTR{/sys/devices/pci0000:00/0000:00:03.1/0000:04:00.0/0000:05:01.0/0000:07:00.0/usb3/3-1/3-1:1.0/sound/card0/controlC0/../uevent},
ignoring: No such file or directory
May 21 11:01:42 um773arch (udev-worker)[440]: controlC1:
/usr/lib/udev/rules.d/78-sound-card.rules:5 Failed to write
ATTR{/sys/devices/pci0000:00/0000:00:03.1/0000:04:00.0/0000:05:00.0/0000:06:00.0/usb1/1-2/1-2:1.0/sound/card1/controlC1/../uevent},
ignoring: No such file or directory
May 21 11:01:43 um773arch kernel: hid-generic 0003:0D8C:0134.000A: No
inputs registered, leaving

On Tue, May 21, 2024 at 10:55 AM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> Hi,
>
> On Tue, May 21, 2024 at 10:07:23AM +0200, Gia wrote:
> > Thank you Mika,
> >
> > Here you have the output of sudo journalctl -k without enabling the
> > kernel option "pcie_aspm=off": https://codeshare.io/7JPgpE. Without
> > "pcie_aspm=off", "thunderbolt.host_reset=false" is not needed, my
> > thunderbolt dock does work. I also connected a 4k monitor to the
> > thunderbolt dock thinking it could provide more data.
> >
> > I'm almost sure I used this option when I set up this system because
> > it solved some issues with system suspending, but it happened many
> > months ago.
>
> Okay. I recommend not to use it. The defaults should always be the best
> option (unless you really know what you are doing or working around some
> issue).
>
> The dmesg you shared looks good, there are few oddities but they should
> not matter from functional perspective (unless you are planning to have
> a second monitor connected).
>
> First is this:
>
>   May 21 09:59:40 um773arch kernel: thunderbolt 0000:36:00.5: IOMMU DMA protection is disabled
>
> It should really be enabled but I'm not familiar with AMD hardware to
> tell more so hoping Mario can comment on that.
>
> The second thing is the USB4 link that seems to be degraded to 2x10G =
> 20G even though you say it is a Thunderbolt cable. I'll comment more on
> that in the other email.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Mika Westerberg]

On Tue, May 21, 2024 at 11:24:56AM +0200, Gia wrote:
> Thank you for your suggestion Mika, as a general rule I totally agree
> with you and I do not mess with kernel default parameters, but I
> remember "pcie_aspm=off" was necessary at the time I set up the
> system. Probably a kernel or a BIOS update makes it unnecessary today.

Okay, thanks.

> I see it removes these messages from my logs but I trust you when you
> say they have not an impact on functionality:
> 
> May 21 11:01:36 um773arch kernel: pcieport 0000:05:04.0: Unable to
> change power state from D3hot to D0, device inaccessible
> May 21 11:01:36 um773arch kernel: igb 0000:09:00.0 eth0: PCIe link lost
> May 21 11:01:36 um773arch kernel: xhci_hcd 0000:08:00.0: xHCI host
> controller not responding, assume dead
> May 21 11:01:36 um773arch kernel: xhci_hcd 0000:07:00.0: xHCI host
> controller not responding, assume dead

Correct these are side-effect of the USB4 topology reset we do. As
explained earlier the tunnels get re-established and the devices will
come back soon after this.

Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Limonciello, Mario]

On 5/21/2024 3:55 AM, Mika Westerberg wrote:
> Hi,
> 
> On Tue, May 21, 2024 at 10:07:23AM +0200, Gia wrote:
>> Thank you Mika,
>>
>> Here you have the output of sudo journalctl -k without enabling the
>> kernel option "pcie_aspm=off": https://codeshare.io/7JPgpE. Without
>> "pcie_aspm=off", "thunderbolt.host_reset=false" is not needed, my
>> thunderbolt dock does work. I also connected a 4k monitor to the
>> thunderbolt dock thinking it could provide more data.
>>
>> I'm almost sure I used this option when I set up this system because
>> it solved some issues with system suspending, but it happened many
>> months ago.
> 
> Okay. I recommend not to use it. The defaults should always be the best
> option (unless you really know what you are doing or working around some
> issue).

Windows and Linux handle port pm differently at suspend.  I've had a few 
patch series attempts to allow unifying them with some "smaller" pieces 
landing as well as a quirk for one of the root ports.

But the specific issue that was happening was a platform bug that 
occurred due to this.  It's since then been fixed, and I guess you have 
a new BIOS Gia.

Completely agree with Mika the default policy for Linux is generally 
right though.

> 
> The dmesg you shared looks good, there are few oddities but they should
> not matter from functional perspective (unless you are planning to have
> a second monitor connected).
> 
> First is this:
> 
>    May 21 09:59:40 um773arch kernel: thunderbolt 0000:36:00.5: IOMMU DMA protection is disabled
> 
> It should really be enabled but I'm not familiar with AMD hardware to
> tell more so hoping Mario can comment on that.

This is controlled by OEM BIOS policy.
You should try to turn it on if you can as it's a more secure setup.
Some of the Linux stack (for example bolt) will automatically authorize 
PCIe and TBT3 devices when it's deemed secure.

I'm not familiar with the OEM for your machine, but some strings you can 
look for that might point you in that direction to enable it:

1) "Kernel DMA protection"
2) "Security levels"

I know some OEMs also only enable it when you "load optimized defaults".

> 
> The second thing is the USB4 link that seems to be degraded to 2x10G =
> 20G even though you say it is a Thunderbolt cable. I'll comment more on
> that in the other email.