[PATCH v6 05/10] drm/bridge: display-connector: Use fwnode APIs to acquire device properties

[Sui Jingfeng <sui.jingfeng@linux.dev>]

Switch to use the fwnode APIs, which is a fundamental step to make this
driver OF-independent possible. No functional changes for DT-based systems.

Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
---
 drivers/gpu/drm/bridge/display-connector.c | 23 +++++++++++-----------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index fb1e97d385fe..7436e7cd53fc 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -9,7 +9,6 @@
 #include <linux/media-bus-format.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
@@ -204,6 +203,7 @@ static int display_connector_get_supply(struct platform_device *pdev,
 
 static int display_connector_probe(struct platform_device *pdev)
 {
+	struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev);
 	struct display_connector *conn;
 	unsigned int type;
 	const char *label = NULL;
@@ -215,15 +215,15 @@ static int display_connector_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, conn);
 
-	type = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	type = (uintptr_t)device_get_match_data(&pdev->dev);
 
 	/* Get the exact connector type. */
 	switch (type) {
 	case DRM_MODE_CONNECTOR_DVII: {
 		bool analog, digital;
 
-		analog = of_property_read_bool(pdev->dev.of_node, "analog");
-		digital = of_property_read_bool(pdev->dev.of_node, "digital");
+		analog = fwnode_property_present(fwnode, "analog");
+		digital = fwnode_property_present(fwnode, "digital");
 		if (analog && !digital) {
 			conn->bridge.type = DRM_MODE_CONNECTOR_DVIA;
 		} else if (!analog && digital) {
@@ -240,8 +240,7 @@ static int display_connector_probe(struct platform_device *pdev)
 	case DRM_MODE_CONNECTOR_HDMIA: {
 		const char *hdmi_type;
 
-		ret = of_property_read_string(pdev->dev.of_node, "type",
-					      &hdmi_type);
+		ret = fwnode_property_read_string(fwnode, "type", &hdmi_type);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "HDMI connector with no type\n");
 			return -EINVAL;
@@ -271,7 +270,7 @@ static int display_connector_probe(struct platform_device *pdev)
 	conn->bridge.interlace_allowed = true;
 
 	/* Get the optional connector label. */
-	of_property_read_string(pdev->dev.of_node, "label", &label);
+	fwnode_property_read_string(fwnode, "label", &label);
 
 	/*
 	 * Get the HPD GPIO for DVI, HDMI and DP connectors. If the GPIO can provide
@@ -309,12 +308,12 @@ static int display_connector_probe(struct platform_device *pdev)
 	if (type == DRM_MODE_CONNECTOR_DVII ||
 	    type == DRM_MODE_CONNECTOR_HDMIA ||
 	    type == DRM_MODE_CONNECTOR_VGA) {
-		struct device_node *phandle;
+		struct fwnode_handle *phandle;
 
-		phandle = of_parse_phandle(pdev->dev.of_node, "ddc-i2c-bus", 0);
-		if (phandle) {
-			conn->bridge.ddc = of_get_i2c_adapter_by_node(phandle);
-			of_node_put(phandle);
+		phandle = fwnode_find_reference(fwnode, "ddc-i2c-bus", 0);
+		if (!IS_ERR(phandle)) {
+			conn->bridge.ddc = i2c_get_adapter_by_fwnode(phandle);
+			fwnode_handle_put(phandle);
 			if (!conn->bridge.ddc)
 				return -EPROBE_DEFER;
 		} else {
-- 
2.34.1