From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
To: joswang <joswang1221@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
"robh@kernel.org" <robh@kernel.org>,
"krzk+dt@kernel.org" <krzk+dt@kernel.org>,
"conor+dt@kernel.org" <conor+dt@kernel.org>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"balbi@kernel.org" <balbi@kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
joswang <joswang@lenovo.com>
Subject: Re: [PATCH v2, 2/3] usb: dwc3: core: add p3p2tranok quirk
Date: Tue, 4 Jun 2024 00:02:02 +0000 [thread overview]
Message-ID: <20240604000147.2xxkkp7efjsbr3i5@synopsys.com> (raw)
In-Reply-To: <20240603130126.25758-1-joswang1221@gmail.com>
On Mon, Jun 03, 2024, joswang wrote:
> From: joswang <joswang@lenovo.com>
>
> In the case of enable hibernation, there is an issue with
I assume this is for host mode since we currently don't handle
hibernation in device mode (please confirm).
> the DWC31 2.00a and earlier versions where the controller
> link power state transition from P3/P3CPM/P4 to P2 may take
> longer than expected, ultimately resulting in the hibernation
> D3 entering time exceeding the expected 10ms.
Can you provide more context where the 10ms requirement is from?
>
> Synopsys workaround:
> If the PHY supports direct P3 to P2 transition, program
> GUSB3PIPECTL.P3P2Tran0K=1.
>
Which STAR issue is this?
> Therefore, adding p3p2tranok quirk for workaround hibernation
> D3 exceeded the expected entry time.
>
> Signed-off-by: joswang <joswang@lenovo.com>
> ---
Please provide change note for v1->v2 here (and the rest of the other
patches).
> drivers/usb/dwc3/core.c | 5 +++++
> drivers/usb/dwc3/core.h | 4 ++++
> 2 files changed, 9 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 7ee61a89520b..3a8fbc2d6b99 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -666,6 +666,9 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
> if (dwc->dis_del_phy_power_chg_quirk)
> reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>
> + if (dwc->p2p3tranok_quirk)
> + reg |= DWC3_GUSB3PIPECTL_P3P2TRANOK;
> +
> dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
>
> return 0;
> @@ -1715,6 +1718,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>
> dwc->dis_split_quirk = device_property_read_bool(dev,
> "snps,dis-split-quirk");
> + dwc->p2p3tranok_quirk = device_property_read_bool(dev,
> + "snps,p2p3tranok-quirk");
>
> dwc->lpm_nyet_threshold = lpm_nyet_threshold;
> dwc->tx_de_emphasis = tx_de_emphasis;
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 3781c736c1a1..2810dce8b42e 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -327,6 +327,7 @@
> #define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1)
> #define DWC3_GUSB3PIPECTL_DEPOCHANGE BIT(18)
> #define DWC3_GUSB3PIPECTL_SUSPHY BIT(17)
> +#define DWC3_GUSB3PIPECTL_P3P2TRANOK BIT(11)
> #define DWC3_GUSB3PIPECTL_LFPSFILT BIT(9)
> #define DWC3_GUSB3PIPECTL_RX_DETOPOLL BIT(8)
> #define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
> @@ -1132,6 +1133,8 @@ struct dwc3_scratchpad_array {
> * instances in park mode.
> * @parkmode_disable_hs_quirk: set if we need to disable all HishSpeed
> * instances in park mode.
> + * @p2p3tranok_quirk: set if Controller transitions directly from phy
> + * power state P2 to P3 or from state P3 to P2.
> * @gfladj_refclk_lpm_sel: set if we need to enable SOF/ITP counter
> * running based on ref_clk
> * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
> @@ -1361,6 +1364,7 @@ struct dwc3 {
> unsigned ulpi_ext_vbus_drv:1;
> unsigned parkmode_disable_ss_quirk:1;
> unsigned parkmode_disable_hs_quirk:1;
> + unsigned p2p3tranok_quirk:1;
> unsigned gfladj_refclk_lpm_sel:1;
>
> unsigned tx_de_emphasis_quirk:1;
> --
> 2.17.1
>
Thanks,
Thinh
next prev parent reply other threads:[~2024-06-04 0:02 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-01 9:26 [PATCH 1/2] usb: dwc3: core: add p3p2tranok quirk joswang
2024-06-01 9:32 ` [PATCH 2/2] usb: dwc3: core: Workaround for CSR read timeout joswang
2024-06-03 13:00 ` [PATCH v2, 1/3] dt-bindings: usb: dwc3: Add snps,p2p3tranok quirk joswang
2024-06-04 6:33 ` Krzysztof Kozlowski
2024-06-12 14:28 ` joswang
2024-06-13 6:09 ` Krzysztof Kozlowski
2024-06-03 13:01 ` [PATCH v2, 2/3] usb: dwc3: core: add p3p2tranok quirk joswang
2024-06-04 0:02 ` Thinh Nguyen [this message]
2024-06-05 4:49 ` joswang
2024-06-07 14:24 ` joswang
2024-06-19 11:56 ` joswang
2024-06-22 0:05 ` Thinh Nguyen
2024-06-25 13:31 ` joswang
2024-06-26 1:29 ` Thinh Nguyen
2024-07-01 11:48 ` joswang
2024-06-03 13:02 ` [PATCH v2, 3/3] usb: dwc3: core: Workaround for CSR read timeout joswang
2024-06-04 0:07 ` Thinh Nguyen
2024-06-04 13:36 ` joswang
2024-06-04 23:13 ` Thinh Nguyen
2024-06-06 1:29 ` Thinh Nguyen
2024-06-07 14:07 ` joswang
2024-06-07 22:36 ` Thinh Nguyen
[not found] ` <CAMtoTm1roAvvWCu9LSfcbnozZnakMEexdUVxNyZ7N5KOG8tHcg@mail.gmail.com>
2024-06-07 22:49 ` Thinh Nguyen
2024-06-11 14:29 ` [PATCH v3, " joswang
2024-06-12 7:58 ` Greg KH
2024-06-12 12:44 ` joswang
2024-06-12 13:52 ` joswang
2024-06-12 14:07 ` Greg KH
2024-06-12 14:15 ` joswang
2024-06-12 7:58 ` Greg KH
2024-06-12 12:47 ` joswang
2024-06-12 12:56 ` Greg KH
2024-06-12 13:39 ` joswang
2024-06-12 13:52 ` Greg KH
2024-06-12 14:54 ` [PATCH v3, 1/3] dt-bindings: usb: dwc3: Add snps,p2p3tranok quirk joswang
2024-06-12 15:07 ` [PATCH v3, 2/3] usb: dwc3: core: add p3p2tranok quirk joswang
2024-06-12 15:23 ` [PATCH v4, 1/3] dt-bindings: usb: dwc3: Add snps,p2p3tranok quirk joswang
2024-06-13 6:17 ` Krzysztof Kozlowski
2024-06-13 13:19 ` joswang
2024-06-13 14:03 ` Krzysztof Kozlowski
2024-06-12 15:36 ` [PATCH v4, 2/3] usb: dwc3: core: add p3p2tranok quirk joswang
2024-06-12 15:39 ` [PATCH v4, 3/3] usb: dwc3: core: Workaround for CSR read timeout joswang
2024-06-12 17:04 ` Greg KH
2024-06-12 17:13 ` Conor Dooley
2024-06-13 11:46 ` joswang
2024-06-18 0:05 ` Thinh Nguyen
2024-06-18 4:24 ` Jung Daehwan
2024-06-18 21:36 ` Thinh Nguyen
2024-06-19 1:34 ` Jung Daehwan
2024-06-18 12:47 ` joswang
2024-06-18 13:38 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604000147.2xxkkp7efjsbr3i5@synopsys.com \
--to=thinh.nguyen@synopsys.com \
--cc=balbi@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=joswang1221@gmail.com \
--cc=joswang@lenovo.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox