[PATCH v2] ni_routing: Check when the file could not be opened

[PATCH v2] ni_routing: Check when the file could not be opened

[Ruffalo Lavoisier]

Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
---
 drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
index d55521b5bdcb..892a66b2cea6 100644
--- a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
@@ -140,6 +140,11 @@ int main(void)
 {
 	FILE *fp = fopen("ni_values.py", "w");
 
+	if (fp == NULL) {
+		fprintf(stderr, "Could not open file!");
+		return -1;
+	}
+
 	/* write route register values */
 	fprintf(fp, "ni_route_values = {\n");
 	for (int i = 0; ni_all_route_values[i]; ++i)
-- 
2.43.0

[PATCH v2] ni_routing: Check when the file could not be opened

[Ruffalo Lavoisier]

Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
---
ah this is It's just a defense code just in case.
 drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
index d55521b5bdcb..892a66b2cea6 100644
--- a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
@@ -140,6 +140,11 @@ int main(void)
 {
 	FILE *fp = fopen("ni_values.py", "w");
 
+	if (fp == NULL) {
+		fprintf(stderr, "Could not open file!");
+		return -1;
+	}
+
 	/* write route register values */
 	fprintf(fp, "ni_route_values = {\n");
 	for (int i = 0; ni_all_route_values[i]; ++i)
-- 
2.43.0

Re: [PATCH v2] ni_routing: Check when the file could not be opened

[Greg Kroah-Hartman]

On Fri, Sep 06, 2024 at 09:10:08PM +0900, Ruffalo Lavoisier wrote:
> Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
> ---
>  drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
> index d55521b5bdcb..892a66b2cea6 100644
> --- a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
> +++ b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
> @@ -140,6 +140,11 @@ int main(void)
>  {
>  	FILE *fp = fopen("ni_values.py", "w");
>  
> +	if (fp == NULL) {
> +		fprintf(stderr, "Could not open file!");
> +		return -1;
> +	}
> +
>  	/* write route register values */
>  	fprintf(fp, "ni_route_values = {\n");
>  	for (int i = 0; ni_all_route_values[i]; ++i)
> -- 
> 2.43.0
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You did not specify a description of why the patch is needed, or
  possibly, any description at all, in the email body.  Please read the
  section entitled "The canonical patch format" in the kernel file,
  Documentation/process/submitting-patches.rst for what is needed in
  order to properly describe the change.

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/process/submitting-patches.rst for what
  needs to be done here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

[PATCH v2] ni_routing: Check when the file could not be opened

[Ruffalo Lavoisier]

- After fopen check NULL before using the file pointer use

Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
---

I'm sorry. I think it's dirty because I'm not used to the patch. I'm going to write it all over again and send it to you.

This is just a defense code just in case.

 drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
index d55521b5bdcb..892a66b2cea6 100644
--- a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
@@ -140,6 +140,11 @@ int main(void)
 {
 	FILE *fp = fopen("ni_values.py", "w");
 
+	if (fp == NULL) {
+		fprintf(stderr, "Could not open file!");
+		return -1;
+	}
+
 	/* write route register values */
 	fprintf(fp, "ni_route_values = {\n");
 	for (int i = 0; ni_all_route_values[i]; ++i)
-- 
2.43.0