public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>,
	Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v18 2/3] ARM: dts: aspeed: yosemite4: add mctp config and sensors for NIC
Date: Mon,  9 Sep 2024 18:54:17 +0800	[thread overview]
Message-ID: <20240909105420.441607-3-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240909105420.441607-1-Delphine_CC_Chiu@wiwynn.com>

From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

- Add MCTP config for NIC and remove the unnecessary MCTP config on bus
15.
- Add 2nd source temperature sensors EMC1403 for NIC.
- Add eeprom for NIC.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 49 ++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index bed6bf695496..7898c4c94b9f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -938,7 +938,6 @@ &i2c15 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-	mctp-controller;
 	multi-master;
 	bus-frequency = <400000>;
 
@@ -958,40 +957,88 @@ imux24: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
+
 			temperature-sensor@1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor@3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		imux25: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			mctp-controller;
+
 			temperature-sensor@1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor@3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		imux26: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
+
 			temperature-sensor@1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor@3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		imux27: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+			mctp-controller;
+
 			temperature-sensor@1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor@3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 	};
 };
-- 
2.25.1


  parent reply	other threads:[~2024-09-09 10:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-09 10:54 [PATCH v18 0/3] Add i2c-mux and eeprom devices for Meta Yosemite4 Delphine CC Chiu
2024-09-09 10:54 ` [PATCH v18 1/3] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-09-09 10:54 ` Delphine CC Chiu [this message]
2024-09-09 10:54 ` [PATCH v18 3/3] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-09-09 15:45 ` [PATCH v18 0/3] Add i2c-mux and eeprom devices for Meta Yosemite4 Rob Herring (Arm)
2024-09-12  2:34   ` Andrew Jeffery
2024-09-20  6:38     ` Delphine_CC_Chiu/WYHQ/Wiwynn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240909105420.441607-3-Delphine_CC_Chiu@wiwynn.com \
    --to=delphine_cc_chiu@wiwynn.com \
    --cc=andrew@codeconstruct.com.au \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patrick@stwcx.xyz \
    --cc=ricky.cx.wu.wiwynn@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox