[PATCH v2 05/11] Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"

[Frieder Schrempf <frieder@fris.de>]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

This reverts commit 8c67a11bae889f51fe5054364c3c789dfae3ad73.

It turns out that all boards using the PCA9450 actually have the
SD_VSEL input connected to the VSELECT signal of the SoCs SD/MMC
interface or use a fixed level.

The assumptions on which this was implemented were wrong. There
is no need for a GPIO-only-based approach and keeping this will
cause confusion and lead people to implement non-standard setups.

All in-tree users of this have been migrated and we can savely
remove this now and allow for a more future-proof approach
of syncing the actual status of SD_VSEL and the PMIC driver.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v2:
* rebase to current master
---
 drivers/regulator/pca9450-regulator.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 9714afe347dcc..0f8a515a0b11a 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -5,7 +5,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -32,7 +31,6 @@ struct pca9450_regulator_desc {
 struct pca9450 {
 	struct device *dev;
 	struct regmap *regmap;
-	struct gpio_desc *sd_vsel_gpio;
 	enum pca9450_chip_type type;
 	unsigned int rcnt;
 	int irq;
@@ -1015,18 +1013,6 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 		}
 	}
 
-	/*
-	 * The driver uses the LDO5CTRL_H register to control the LDO5 regulator.
-	 * This is only valid if the SD_VSEL input of the PMIC is high. Let's
-	 * check if the pin is available as GPIO and set it to high.
-	 */
-	pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
-
-	if (IS_ERR(pca9450->sd_vsel_gpio)) {
-		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
-		return PTR_ERR(pca9450->sd_vsel_gpio);
-	}
-
 	dev_info(&i2c->dev, "%s probed.\n",
 		type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
 		(type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));
-- 
2.46.1