[PATCH v2 07/11] regulator: pca9450: Fix enable register for LDO5

[Frieder Schrempf <frieder@fris.de>]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

The LDO5 regulator has two configuration registers, but only
LDO5CTRL_L contains the bits for enabling/disabling the regulator.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
---
Changes for v2:
* none
---
 drivers/regulator/pca9450-regulator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 8e525deaff0b7..7f7e176bef452 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -506,7 +506,7 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
 			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
 			.vsel_mask = LDO5HOUT_MASK,
-			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_reg = PCA9450_REG_LDO5CTRL_L,
 			.enable_mask = LDO5H_EN_MASK,
 			.owner = THIS_MODULE,
 		},
@@ -715,7 +715,7 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
 			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
 			.vsel_mask = LDO5HOUT_MASK,
-			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_reg = PCA9450_REG_LDO5CTRL_L,
 			.enable_mask = LDO5H_EN_MASK,
 			.owner = THIS_MODULE,
 		},
@@ -887,7 +887,7 @@ static const struct pca9450_regulator_desc pca9451a_regulators[] = {
 			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
 			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
 			.vsel_mask = LDO5HOUT_MASK,
-			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_reg = PCA9450_REG_LDO5CTRL_L,
 			.enable_mask = LDO5H_EN_MASK,
 			.owner = THIS_MODULE,
 		},
-- 
2.46.1