[PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[Mark Pearson]

Watchdog driver implementation for Lenovo SE30 platform.

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
---
 drivers/watchdog/Kconfig           |  12 +
 drivers/watchdog/Makefile          |   1 +
 drivers/watchdog/lenovo_se30_wdt.c | 435 +++++++++++++++++++++++++++++
 3 files changed, 448 insertions(+)
 create mode 100644 drivers/watchdog/lenovo_se30_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f81705f8539a..c73e8f0e436c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -279,6 +279,18 @@ config LENOVO_SE10_WDT
 	  This driver can also be built as a module. If so, the module
 	  will be called lenovo-se10-wdt.
 
+config LENOVO_SE30_WDT
+	tristate "Lenovo SE30 Watchdog"
+	depends on (X86 && DMI) || COMPILE_TEST
+	depends on HAS_IOPORT
+	select WATCHDOG_CORE
+	help
+	  If you say yes here you get support for the watchdog
+	  functionality for the Lenovo SE30 platform.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called lenovo-se30-wdt.
+
 config MENF21BMC_WATCHDOG
 	tristate "MEN 14F021P00 BMC Watchdog"
 	depends on MFD_MENF21BMC || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 8411626fa162..c9482904bf87 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
 obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o
 obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
 obj-$(CONFIG_LENOVO_SE10_WDT) += lenovo_se10_wdt.o
+obj-$(CONFIG_LENOVO_SE30_WDT) += lenovo_se30_wdt.o
 ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
 obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
 endif
diff --git a/drivers/watchdog/lenovo_se30_wdt.c b/drivers/watchdog/lenovo_se30_wdt.c
new file mode 100644
index 000000000000..d119f6fe870a
--- /dev/null
+++ b/drivers/watchdog/lenovo_se30_wdt.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * WDT driver for Lenovo SE30 device
+ */
+
+#define dev_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/delay.h>
+#include <linux/iommu.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define IOREGION_OFFSET	4 /* Use EC port 1 */
+#define IOREGION_LENGTH	4
+
+#define WATCHDOG_TIMEOUT 60
+#define MIN_TIMEOUT 1
+#define MAX_TIMEOUT 255
+
+static int timeout; /* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		 "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+		 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define LNV_SE30_NAME "lenovo-se30-wdt"
+#define LNV_SE30_ID   0x0110
+#define CHIPID_MASK   0xFFF0
+
+#define LNV_SE30_MAX_IO_RETRY_NUM 100
+
+#define CHIPID_REG   0x20
+#define SIO_REG      0x2e
+#define LDN_REG      0x07
+#define UNLOCK_KEY   0x87
+#define LOCK_KEY     0xAA
+#define LD_NUM_SHM   0x0F
+#define LD_BASE_ADDR 0xF8
+
+#define WDT_MODULE    0x10
+#define WDT_CFG_INDEX 0x15 /* WD configuration register */
+#define WDT_CNT_INDEX 0x16 /* WD timer count register */
+#define WDT_CFG_RESET 0x2
+
+/* Host Interface WIN2 offset definition */
+#define SHM_WIN_SIZE        0xFF
+#define SHM_WIN_MOD_OFFSET  0x01
+#define SHM_WIN_CMD_OFFSET  0x02
+#define SHM_WIN_SEL_OFFSET  0x03
+#define SHM_WIN_CTL_OFFSET  0x04
+#define VAL_SHM_WIN_CTRL_WR 0x40
+#define VAL_SHM_WIN_CTRL_RD 0x80
+#define SHM_WIN_ID_OFFSET   0x08
+#define SHM_WIN_DAT_OFFSET  0x10
+
+struct nct6692_shm {
+	unsigned char __iomem *base_addr;
+	unsigned long base_phys;
+};
+
+struct nct6692_sio {
+	unsigned long base_phys;
+	int sioreg;
+};
+
+struct nct6692_reg {
+	unsigned char mod;
+	unsigned char cmd;
+	unsigned char sel;
+	unsigned int idx;
+};
+
+/* Watchdog is based on NCT6692 device */
+struct lenovo_se30_wdt {
+	struct nct6692_shm shm;
+	struct nct6692_reg wdt_cfg;
+	struct nct6692_reg wdt_cnt;
+	struct nct6692_sio sio;
+	struct watchdog_device wdt;
+};
+
+static inline void superio_outb(int ioreg, int reg, int val)
+{
+	outb(reg, ioreg);
+	outb(val, ioreg + 1);
+}
+
+static inline int superio_inb(int ioreg, int reg)
+{
+	outb(reg, ioreg);
+	return inb(ioreg + 1);
+}
+
+static inline int superio_enter(int key, int addr, const char *name)
+{
+	if (!request_muxed_region(addr, 2, name)) {
+		pr_err("I/O address 0x%04x already in use\n", addr);
+		return -EBUSY;
+	}
+	outb(key, addr); /* Enter extended function mode */
+	outb(key, addr); /* Again according to manual */
+
+	return 0;
+}
+
+static inline void superio_exit(int key, int addr)
+{
+	outb(key, addr); /* Leave extended function mode */
+	release_region(addr, 2);
+}
+
+static int shm_get_ready(const struct nct6692_shm *shm,
+			 const struct nct6692_reg *reg)
+{
+	unsigned char pre_id, new_id;
+	int i;
+
+	iowrite8(reg->mod, shm->base_addr + SHM_WIN_MOD_OFFSET);
+	iowrite8(reg->cmd, shm->base_addr + SHM_WIN_CMD_OFFSET);
+	iowrite8(reg->sel, shm->base_addr + SHM_WIN_SEL_OFFSET);
+
+	pre_id = ioread8(shm->base_addr + SHM_WIN_ID_OFFSET);
+	iowrite8(VAL_SHM_WIN_CTRL_RD, shm->base_addr + SHM_WIN_CTL_OFFSET);
+
+	/* Loop checking when interface is ready */
+	for (i = 0; i < LNV_SE30_MAX_IO_RETRY_NUM; i++) {
+		new_id = ioread8(shm->base_addr + SHM_WIN_ID_OFFSET);
+		if (new_id != pre_id)
+			return 0;
+		msleep(20);
+	}
+	return -ETIMEDOUT;
+}
+
+static int read_shm_win(const struct nct6692_shm *shm,
+			const struct nct6692_reg *reg,
+			unsigned char idx_offset,
+			unsigned char *data)
+{
+	int err = shm_get_ready(shm, reg);
+
+	if (err)
+		return err;
+	*data = ioread8(shm->base_addr + SHM_WIN_DAT_OFFSET + reg->idx + idx_offset);
+	return 0;
+}
+
+static int write_shm_win(const struct nct6692_shm *shm,
+			 const struct nct6692_reg *reg,
+			 unsigned char idx_offset,
+			 unsigned char val)
+{
+	int err = shm_get_ready(shm, reg);
+
+	if (err)
+		return err;
+	iowrite8(val, shm->base_addr + SHM_WIN_DAT_OFFSET + reg->idx + idx_offset);
+	iowrite8(VAL_SHM_WIN_CTRL_WR, shm->base_addr + SHM_WIN_CTL_OFFSET);
+	err = shm_get_ready(shm, reg);
+	return err;
+}
+
+static int lenovo_se30_wdt_enable(struct lenovo_se30_wdt *data, unsigned int timeout)
+{
+	if (timeout) {
+		int err = write_shm_win(&data->shm, &data->wdt_cfg, 0, WDT_CFG_RESET);
+
+		if (err)
+			return err;
+	}
+	return write_shm_win(&data->shm, &data->wdt_cnt, 0, timeout);
+}
+
+static int lenovo_se30_wdt_start(struct watchdog_device *wdog)
+{
+	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
+	const struct nct6692_shm *shm = &data->shm;
+	int err;
+
+	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
+		return -EBUSY;
+
+	err = lenovo_se30_wdt_enable(data, wdog->timeout);
+	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
+	return err;
+}
+
+static int lenovo_se30_wdt_stop(struct watchdog_device *wdog)
+{
+	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
+	const struct nct6692_shm *shm = &data->shm;
+	int err;
+
+	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
+		return -EBUSY;
+
+	err = lenovo_se30_wdt_enable(data, 0);
+	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
+	return err;
+}
+
+static int lenovo_se30_wdt_set_timeout(struct watchdog_device *wdog,
+				       unsigned int timeout)
+{
+	wdog->timeout = timeout;
+	return 0;
+}
+
+static unsigned int lenovo_se30_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
+	const struct nct6692_shm *shm = &data->shm;
+	unsigned char timeleft;
+	int err;
+
+	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
+		return -EBUSY;
+
+	err = read_shm_win(&data->shm, &data->wdt_cnt, 0, &timeleft);
+	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
+	if (err)
+		return 0;
+	return timeleft;
+}
+
+static int lenovo_se30_wdt_ping(struct watchdog_device *wdt)
+{
+	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdt);
+	const struct nct6692_shm *shm = &data->shm;
+	int err = 0;
+
+	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
+		return -EBUSY;
+
+	/*
+	 * Device does not support refreshing WDT_TIMER_REG register when
+	 * the watchdog is active.  Need to disable, feed and enable again
+	 */
+	err = lenovo_se30_wdt_enable(data, 0);
+	if (err)
+		return err;
+
+	err = write_shm_win(&data->shm, &data->wdt_cnt, 0, wdt->timeout);
+	if (!err)
+		err = lenovo_se30_wdt_enable(data, wdt->timeout);
+
+	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
+	return err;
+}
+
+static const struct watchdog_info lenovo_se30_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+	.identity	= "Lenovo SE30 watchdog",
+};
+
+static const struct watchdog_ops lenovo_se30_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= lenovo_se30_wdt_start,
+	.stop		= lenovo_se30_wdt_stop,
+	.ping		= lenovo_se30_wdt_ping,
+	.set_timeout	= lenovo_se30_wdt_set_timeout,
+	.get_timeleft	= lenovo_se30_wdt_get_timeleft,
+};
+
+static int lenovo_se30_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lenovo_se30_wdt *priv;
+	unsigned long base_phys;
+	unsigned short val;
+	int err;
+
+	err = superio_enter(UNLOCK_KEY, SIO_REG, LNV_SE30_NAME);
+	if (err)
+		return err;
+
+	val = superio_inb(SIO_REG, CHIPID_REG) << 8;
+	val |= superio_inb(SIO_REG, CHIPID_REG + 1);
+
+	if ((val & CHIPID_MASK) != LNV_SE30_ID) {
+		superio_exit(LOCK_KEY, SIO_REG);
+		return -ENODEV;
+	}
+
+	superio_outb(SIO_REG, LDN_REG, LD_NUM_SHM);
+	base_phys = (superio_inb(SIO_REG, LD_BASE_ADDR) |
+			 (superio_inb(SIO_REG, LD_BASE_ADDR + 1) << 8) |
+			 (superio_inb(SIO_REG, LD_BASE_ADDR + 2) << 16) |
+			 (superio_inb(SIO_REG, LD_BASE_ADDR + 3) << 24)) &
+			0xFFFFFFFF;
+
+	superio_exit(LOCK_KEY, SIO_REG);
+	if (base_phys == 0xFFFFFFFF || base_phys == 0)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->sio.base_phys = base_phys;
+	priv->shm.base_phys = base_phys;
+	priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
+
+	priv->wdt_cfg.mod = WDT_MODULE;
+	priv->wdt_cfg.idx = WDT_CFG_INDEX;
+	priv->wdt_cnt.mod = WDT_MODULE;
+	priv->wdt_cnt.idx = WDT_CNT_INDEX;
+
+	priv->wdt.ops = &lenovo_se30_wdt_ops;
+	priv->wdt.info = &lenovo_se30_wdt_info;
+	priv->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
+	priv->wdt.min_timeout = MIN_TIMEOUT;
+	priv->wdt.max_timeout = MAX_TIMEOUT;
+	priv->wdt.parent = dev;
+
+	watchdog_init_timeout(&priv->wdt, timeout, dev);
+	watchdog_set_drvdata(&priv->wdt, priv);
+	watchdog_set_nowayout(&priv->wdt, nowayout);
+	watchdog_stop_on_reboot(&priv->wdt);
+	watchdog_stop_on_unregister(&priv->wdt);
+
+	return devm_watchdog_register_device(dev, &priv->wdt);
+}
+
+static struct platform_device *pdev;
+
+static struct platform_driver lenovo_se30_wdt_driver = {
+	.driver = {
+		.name = LNV_SE30_NAME,
+	},
+	.probe  = lenovo_se30_wdt_probe,
+};
+
+static int lenovo_se30_create_platform_device(const struct dmi_system_id *id)
+{
+	int err;
+
+	pdev = platform_device_alloc(LNV_SE30_NAME, -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	err = platform_device_add(pdev);
+	if (err)
+		platform_device_put(pdev);
+
+	return err;
+}
+
+static const struct dmi_system_id lenovo_se30_wdt_dmi_table[] __initconst = {
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NA"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NB"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NC"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NH"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NJ"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{
+		.ident = "LENOVO-SE30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "11NK"),
+		},
+		.callback = lenovo_se30_create_platform_device,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, lenovo_se30_wdt_dmi_table);
+
+static int __init lenovo_se30_wdt_init(void)
+{
+	if (!dmi_check_system(lenovo_se30_wdt_dmi_table))
+		return -ENODEV;
+
+	return platform_driver_register(&lenovo_se30_wdt_driver);
+}
+
+static void __exit lenovo_se30_wdt_exit(void)
+{
+	if (pdev)
+		platform_device_unregister(pdev);
+	platform_driver_unregister(&lenovo_se30_wdt_driver);
+}
+
+module_init(lenovo_se30_wdt_init);
+module_exit(lenovo_se30_wdt_exit);
+
+MODULE_AUTHOR("Mark Pearson <mpearson-lenovo@squebb.ca>");
+MODULE_AUTHOR("David Ober <dober@lenovo.com>");
+MODULE_DESCRIPTION("Lenovo SE30 watchdog driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1

Re: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[Guenter Roeck]

On 1/15/25 06:05, Mark Pearson wrote:
> Watchdog driver implementation for Lenovo SE30 platform.
> 
> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
> ---
>   drivers/watchdog/Kconfig           |  12 +
>   drivers/watchdog/Makefile          |   1 +
>   drivers/watchdog/lenovo_se30_wdt.c | 435 +++++++++++++++++++++++++++++
>   3 files changed, 448 insertions(+)
>   create mode 100644 drivers/watchdog/lenovo_se30_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f81705f8539a..c73e8f0e436c 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -279,6 +279,18 @@ config LENOVO_SE10_WDT
>   	  This driver can also be built as a module. If so, the module
>   	  will be called lenovo-se10-wdt.
>   
> +config LENOVO_SE30_WDT
> +	tristate "Lenovo SE30 Watchdog"
> +	depends on (X86 && DMI) || COMPILE_TEST
> +	depends on HAS_IOPORT
> +	select WATCHDOG_CORE
> +	help
> +	  If you say yes here you get support for the watchdog
> +	  functionality for the Lenovo SE30 platform.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called lenovo-se30-wdt.
> +
>   config MENF21BMC_WATCHDOG
>   	tristate "MEN 14F021P00 BMC Watchdog"
>   	depends on MFD_MENF21BMC || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 8411626fa162..c9482904bf87 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -124,6 +124,7 @@ obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
>   obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o
>   obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
>   obj-$(CONFIG_LENOVO_SE10_WDT) += lenovo_se10_wdt.o
> +obj-$(CONFIG_LENOVO_SE30_WDT) += lenovo_se30_wdt.o
>   ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
>   obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
>   endif
> diff --git a/drivers/watchdog/lenovo_se30_wdt.c b/drivers/watchdog/lenovo_se30_wdt.c
> new file mode 100644
> index 000000000000..d119f6fe870a
> --- /dev/null
> +++ b/drivers/watchdog/lenovo_se30_wdt.c
> @@ -0,0 +1,435 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * WDT driver for Lenovo SE30 device
> + */
> +
> +#define dev_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/acpi.h>

I don't see any ACPI code.

> +#include <linux/dmi.h>
> +#include <linux/delay.h>
> +#include <linux/iommu.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +#define IOREGION_OFFSET	4 /* Use EC port 1 */
> +#define IOREGION_LENGTH	4
> +
> +#define WATCHDOG_TIMEOUT 60
> +#define MIN_TIMEOUT 1

What is the point of a 1-second timeout if a ping can take up to 6 seconds ?

> +#define MAX_TIMEOUT 255
> +

Please use

#define<space>NAME<tab>value

for defines, and align the value.

> +static int timeout; /* in seconds */
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout,
> +		 "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
> +		 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> +		 "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +#define LNV_SE30_NAME "lenovo-se30-wdt"
> +#define LNV_SE30_ID   0x0110
> +#define CHIPID_MASK   0xFFF0
> +
> +#define LNV_SE30_MAX_IO_RETRY_NUM 100
> +
> +#define CHIPID_REG   0x20
> +#define SIO_REG      0x2e
> +#define LDN_REG      0x07
> +#define UNLOCK_KEY   0x87
> +#define LOCK_KEY     0xAA
> +#define LD_NUM_SHM   0x0F
> +#define LD_BASE_ADDR 0xF8
> +
> +#define WDT_MODULE    0x10
> +#define WDT_CFG_INDEX 0x15 /* WD configuration register */
> +#define WDT_CNT_INDEX 0x16 /* WD timer count register */
> +#define WDT_CFG_RESET 0x2
> +
> +/* Host Interface WIN2 offset definition */
> +#define SHM_WIN_SIZE        0xFF
> +#define SHM_WIN_MOD_OFFSET  0x01
> +#define SHM_WIN_CMD_OFFSET  0x02
> +#define SHM_WIN_SEL_OFFSET  0x03
> +#define SHM_WIN_CTL_OFFSET  0x04
> +#define VAL_SHM_WIN_CTRL_WR 0x40
> +#define VAL_SHM_WIN_CTRL_RD 0x80
> +#define SHM_WIN_ID_OFFSET   0x08
> +#define SHM_WIN_DAT_OFFSET  0x10
> +
> +struct nct6692_shm {
> +	unsigned char __iomem *base_addr;
> +	unsigned long base_phys;
> +};
> +
> +struct nct6692_sio {
> +	unsigned long base_phys;
> +	int sioreg;
> +};
> +
> +struct nct6692_reg {
> +	unsigned char mod;
> +	unsigned char cmd;
> +	unsigned char sel;
> +	unsigned int idx;
> +};
> +
> +/* Watchdog is based on NCT6692 device */
> +struct lenovo_se30_wdt {
> +	struct nct6692_shm shm;
> +	struct nct6692_reg wdt_cfg;
> +	struct nct6692_reg wdt_cnt;
> +	struct nct6692_sio sio;
> +	struct watchdog_device wdt;
> +};
> +
> +static inline void superio_outb(int ioreg, int reg, int val)
> +{
> +	outb(reg, ioreg);
> +	outb(val, ioreg + 1);
> +}
> +
> +static inline int superio_inb(int ioreg, int reg)
> +{
> +	outb(reg, ioreg);
> +	return inb(ioreg + 1);
> +}
> +
> +static inline int superio_enter(int key, int addr, const char *name)
> +{
> +	if (!request_muxed_region(addr, 2, name)) {
> +		pr_err("I/O address 0x%04x already in use\n", addr);
> +		return -EBUSY;
> +	}
> +	outb(key, addr); /* Enter extended function mode */
> +	outb(key, addr); /* Again according to manual */
> +
> +	return 0;
> +}
> +
> +static inline void superio_exit(int key, int addr)
> +{
> +	outb(key, addr); /* Leave extended function mode */
> +	release_region(addr, 2);
> +}
> +
> +static int shm_get_ready(const struct nct6692_shm *shm,
> +			 const struct nct6692_reg *reg)
> +{
> +	unsigned char pre_id, new_id;
> +	int i;
> +
> +	iowrite8(reg->mod, shm->base_addr + SHM_WIN_MOD_OFFSET);
> +	iowrite8(reg->cmd, shm->base_addr + SHM_WIN_CMD_OFFSET);
> +	iowrite8(reg->sel, shm->base_addr + SHM_WIN_SEL_OFFSET);
> +
> +	pre_id = ioread8(shm->base_addr + SHM_WIN_ID_OFFSET);
> +	iowrite8(VAL_SHM_WIN_CTRL_RD, shm->base_addr + SHM_WIN_CTL_OFFSET);
> +
> +	/* Loop checking when interface is ready */
> +	for (i = 0; i < LNV_SE30_MAX_IO_RETRY_NUM; i++) {
> +		new_id = ioread8(shm->base_addr + SHM_WIN_ID_OFFSET);
> +		if (new_id != pre_id)
> +			return 0;
> +		msleep(20);

Can it really take up to 100 * 20 = 2,000 ms for the chip to become ready ?

It seems to me that this huge timeout makes the driver pretty much pointless.

> +	}
> +	return -ETIMEDOUT;
> +}
> +
> +static int read_shm_win(const struct nct6692_shm *shm,
> +			const struct nct6692_reg *reg,
> +			unsigned char idx_offset,
> +			unsigned char *data)
> +{
> +	int err = shm_get_ready(shm, reg);
> +
> +	if (err)
> +		return err;
> +	*data = ioread8(shm->base_addr + SHM_WIN_DAT_OFFSET + reg->idx + idx_offset);
> +	return 0;
> +}
> +
> +static int write_shm_win(const struct nct6692_shm *shm,
> +			 const struct nct6692_reg *reg,
> +			 unsigned char idx_offset,
> +			 unsigned char val)
> +{
> +	int err = shm_get_ready(shm, reg);
> +
> +	if (err)
> +		return err;
> +	iowrite8(val, shm->base_addr + SHM_WIN_DAT_OFFSET + reg->idx + idx_offset);
> +	iowrite8(VAL_SHM_WIN_CTRL_WR, shm->base_addr + SHM_WIN_CTL_OFFSET);
> +	err = shm_get_ready(shm, reg);
> +	return err;
> +}
> +
> +static int lenovo_se30_wdt_enable(struct lenovo_se30_wdt *data, unsigned int timeout)
> +{
> +	if (timeout) {
> +		int err = write_shm_win(&data->shm, &data->wdt_cfg, 0, WDT_CFG_RESET);
> +
> +		if (err)
> +			return err;
> +	}
> +	return write_shm_win(&data->shm, &data->wdt_cnt, 0, timeout);
> +}
> +
> +static int lenovo_se30_wdt_start(struct watchdog_device *wdog)
> +{
> +	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
> +	const struct nct6692_shm *shm = &data->shm;
> +	int err;
> +
> +	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
> +		return -EBUSY;
> +

Are any other drivers using this region ? If not, it would be better to
request the region once in the probe function. If there are other drivers
using it, why not use request_muxed_region() ?

> +	err = lenovo_se30_wdt_enable(data, wdog->timeout);
> +	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
> +	return err;
> +}
> +
> +static int lenovo_se30_wdt_stop(struct watchdog_device *wdog)
> +{
> +	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
> +	const struct nct6692_shm *shm = &data->shm;
> +	int err;
> +
> +	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
> +		return -EBUSY;
> +
> +	err = lenovo_se30_wdt_enable(data, 0);
> +	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
> +	return err;
> +}
> +
> +static int lenovo_se30_wdt_set_timeout(struct watchdog_device *wdog,
> +				       unsigned int timeout)
> +{
> +	wdog->timeout = timeout;
> +	return 0;
> +}
> +
> +static unsigned int lenovo_se30_wdt_get_timeleft(struct watchdog_device *wdog)
> +{
> +	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdog);
> +	const struct nct6692_shm *shm = &data->shm;
> +	unsigned char timeleft;
> +	int err;
> +
> +	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
> +		return -EBUSY;
> +
> +	err = read_shm_win(&data->shm, &data->wdt_cnt, 0, &timeleft);
> +	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
> +	if (err)
> +		return 0;
> +	return timeleft;
> +}
> +
> +static int lenovo_se30_wdt_ping(struct watchdog_device *wdt)
> +{
> +	struct lenovo_se30_wdt *data = watchdog_get_drvdata(wdt);
> +	const struct nct6692_shm *shm = &data->shm;
> +	int err = 0;
> +
> +	if (!request_mem_region(shm->base_phys, SHM_WIN_SIZE, LNV_SE30_NAME))
> +		return -EBUSY;
> +
> +	/*
> +	 * Device does not support refreshing WDT_TIMER_REG register when
> +	 * the watchdog is active.  Need to disable, feed and enable again
> +	 */

Seriously ? With the huge timeouts associated with each write, that can
cause the watchdog to be disabled for each ping for several seconds.
Diasabling can cause a delay of 2 seconds, plus four more seconds for
re-enabling it. Is that even worth the trouble of providing a watchdog ?

> +	err = lenovo_se30_wdt_enable(data, 0);
> +	if (err)
> +		return err;

This leaves the memory region unreleased.

> +
> +	err = write_shm_win(&data->shm, &data->wdt_cnt, 0, wdt->timeout);
> +	if (!err)
> +		err = lenovo_se30_wdt_enable(data, wdt->timeout);
> +
> +	release_mem_region(shm->base_phys, SHM_WIN_SIZE);
> +	return err;
> +}
> +
> +static const struct watchdog_info lenovo_se30_wdt_info = {
> +	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +			  WDIOF_MAGICCLOSE,
> +	.identity	= "Lenovo SE30 watchdog",
> +};
> +
> +static const struct watchdog_ops lenovo_se30_wdt_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= lenovo_se30_wdt_start,
> +	.stop		= lenovo_se30_wdt_stop,
> +	.ping		= lenovo_se30_wdt_ping,
> +	.set_timeout	= lenovo_se30_wdt_set_timeout,
> +	.get_timeleft	= lenovo_se30_wdt_get_timeleft,
> +};
> +
> +static int lenovo_se30_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct lenovo_se30_wdt *priv;
> +	unsigned long base_phys;
> +	unsigned short val;
> +	int err;
> +
> +	err = superio_enter(UNLOCK_KEY, SIO_REG, LNV_SE30_NAME);
> +	if (err)
> +		return err;
> +
> +	val = superio_inb(SIO_REG, CHIPID_REG) << 8;
> +	val |= superio_inb(SIO_REG, CHIPID_REG + 1);
> +
> +	if ((val & CHIPID_MASK) != LNV_SE30_ID) {
> +		superio_exit(LOCK_KEY, SIO_REG);
> +		return -ENODEV;
> +	}
> +
> +	superio_outb(SIO_REG, LDN_REG, LD_NUM_SHM);
> +	base_phys = (superio_inb(SIO_REG, LD_BASE_ADDR) |
> +			 (superio_inb(SIO_REG, LD_BASE_ADDR + 1) << 8) |
> +			 (superio_inb(SIO_REG, LD_BASE_ADDR + 2) << 16) |
> +			 (superio_inb(SIO_REG, LD_BASE_ADDR + 3) << 24)) &
> +			0xFFFFFFFF;
> +
> +	superio_exit(LOCK_KEY, SIO_REG);
> +	if (base_phys == 0xFFFFFFFF || base_phys == 0)
> +		return -ENODEV;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->sio.base_phys = base_phys;
> +	priv->shm.base_phys = base_phys;
> +	priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
> +
> +	priv->wdt_cfg.mod = WDT_MODULE;
> +	priv->wdt_cfg.idx = WDT_CFG_INDEX;
> +	priv->wdt_cnt.mod = WDT_MODULE;
> +	priv->wdt_cnt.idx = WDT_CNT_INDEX;
> +
> +	priv->wdt.ops = &lenovo_se30_wdt_ops;
> +	priv->wdt.info = &lenovo_se30_wdt_info;
> +	priv->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
> +	priv->wdt.min_timeout = MIN_TIMEOUT;
> +	priv->wdt.max_timeout = MAX_TIMEOUT;
> +	priv->wdt.parent = dev;
> +
> +	watchdog_init_timeout(&priv->wdt, timeout, dev);
> +	watchdog_set_drvdata(&priv->wdt, priv);
> +	watchdog_set_nowayout(&priv->wdt, nowayout);
> +	watchdog_stop_on_reboot(&priv->wdt);
> +	watchdog_stop_on_unregister(&priv->wdt);
> +
> +	return devm_watchdog_register_device(dev, &priv->wdt);
> +}
> +
> +static struct platform_device *pdev;
> +
> +static struct platform_driver lenovo_se30_wdt_driver = {
> +	.driver = {
> +		.name = LNV_SE30_NAME,
> +	},
> +	.probe  = lenovo_se30_wdt_probe,
> +};
> +
> +static int lenovo_se30_create_platform_device(const struct dmi_system_id *id)
> +{
> +	int err;
> +
> +	pdev = platform_device_alloc(LNV_SE30_NAME, -1);
> +	if (!pdev)
> +		return -ENOMEM;
> +
> +	err = platform_device_add(pdev);
> +	if (err)
> +		platform_device_put(pdev);
> +
> +	return err;
> +}
> +
> +static const struct dmi_system_id lenovo_se30_wdt_dmi_table[] __initconst = {
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NA"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NB"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NC"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NH"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NJ"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{
> +		.ident = "LENOVO-SE30",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "11NK"),
> +		},
> +		.callback = lenovo_se30_create_platform_device,
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(dmi, lenovo_se30_wdt_dmi_table);
> +
> +static int __init lenovo_se30_wdt_init(void)
> +{
> +	if (!dmi_check_system(lenovo_se30_wdt_dmi_table))
> +		return -ENODEV;
> +
> +	return platform_driver_register(&lenovo_se30_wdt_driver);
> +}
> +
> +static void __exit lenovo_se30_wdt_exit(void)
> +{
> +	if (pdev)
> +		platform_device_unregister(pdev);
> +	platform_driver_unregister(&lenovo_se30_wdt_driver);
> +}
> +
> +module_init(lenovo_se30_wdt_init);
> +module_exit(lenovo_se30_wdt_exit);
> +
> +MODULE_AUTHOR("Mark Pearson <mpearson-lenovo@squebb.ca>");
> +MODULE_AUTHOR("David Ober <dober@lenovo.com>");
> +MODULE_DESCRIPTION("Lenovo SE30 watchdog driver");
> +MODULE_LICENSE("GPL");

Re: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[kernel test robot]

Hi Mark,

kernel test robot noticed the following build warnings:

[auto build test WARNING on groeck-staging/hwmon-next]
[also build test WARNING on linus/master v6.13-rc7 next-20250116]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Mark-Pearson/watchdog-lenovo_se30_wdt-Watchdog-driver-for-Lenovo-SE30-platform/20250115-220703
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20250115140510.2017-1-mpearson-lenovo%40squebb.ca
patch subject: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
config: um-allyesconfig (https://download.01.org/0day-ci/archive/20250116/202501162358.vgAIFntg-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250116/202501162358.vgAIFntg-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202501162358.vgAIFntg-lkp@intel.com/

All warnings (new ones prefixed by >>):

   drivers/watchdog/lenovo_se30_wdt.c: In function 'lenovo_se30_wdt_probe':
   drivers/watchdog/lenovo_se30_wdt.c:314:31: error: implicit declaration of function 'ioremap_cache'; did you mean 'ioremap_uc'? [-Werror=implicit-function-declaration]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                               ^~~~~~~~~~~~~
         |                               ioremap_uc
>> drivers/watchdog/lenovo_se30_wdt.c:314:29: warning: assignment to 'unsigned char *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                             ^
   cc1: some warnings being treated as errors


vim +314 drivers/watchdog/lenovo_se30_wdt.c

   276	
   277	static int lenovo_se30_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct lenovo_se30_wdt *priv;
   281		unsigned long base_phys;
   282		unsigned short val;
   283		int err;
   284	
   285		err = superio_enter(UNLOCK_KEY, SIO_REG, LNV_SE30_NAME);
   286		if (err)
   287			return err;
   288	
   289		val = superio_inb(SIO_REG, CHIPID_REG) << 8;
   290		val |= superio_inb(SIO_REG, CHIPID_REG + 1);
   291	
   292		if ((val & CHIPID_MASK) != LNV_SE30_ID) {
   293			superio_exit(LOCK_KEY, SIO_REG);
   294			return -ENODEV;
   295		}
   296	
   297		superio_outb(SIO_REG, LDN_REG, LD_NUM_SHM);
   298		base_phys = (superio_inb(SIO_REG, LD_BASE_ADDR) |
   299				 (superio_inb(SIO_REG, LD_BASE_ADDR + 1) << 8) |
   300				 (superio_inb(SIO_REG, LD_BASE_ADDR + 2) << 16) |
   301				 (superio_inb(SIO_REG, LD_BASE_ADDR + 3) << 24)) &
   302				0xFFFFFFFF;
   303	
   304		superio_exit(LOCK_KEY, SIO_REG);
   305		if (base_phys == 0xFFFFFFFF || base_phys == 0)
   306			return -ENODEV;
   307	
   308		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
   309		if (!priv)
   310			return -ENOMEM;
   311	
   312		priv->sio.base_phys = base_phys;
   313		priv->shm.base_phys = base_phys;
 > 314		priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
   315	
   316		priv->wdt_cfg.mod = WDT_MODULE;
   317		priv->wdt_cfg.idx = WDT_CFG_INDEX;
   318		priv->wdt_cnt.mod = WDT_MODULE;
   319		priv->wdt_cnt.idx = WDT_CNT_INDEX;
   320	
   321		priv->wdt.ops = &lenovo_se30_wdt_ops;
   322		priv->wdt.info = &lenovo_se30_wdt_info;
   323		priv->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
   324		priv->wdt.min_timeout = MIN_TIMEOUT;
   325		priv->wdt.max_timeout = MAX_TIMEOUT;
   326		priv->wdt.parent = dev;
   327	
   328		watchdog_init_timeout(&priv->wdt, timeout, dev);
   329		watchdog_set_drvdata(&priv->wdt, priv);
   330		watchdog_set_nowayout(&priv->wdt, nowayout);
   331		watchdog_stop_on_reboot(&priv->wdt);
   332		watchdog_stop_on_unregister(&priv->wdt);
   333	
   334		return devm_watchdog_register_device(dev, &priv->wdt);
   335	}
   336	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[kernel test robot]

Hi Mark,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on linus/master v6.13-rc7 next-20250117]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Mark-Pearson/watchdog-lenovo_se30_wdt-Watchdog-driver-for-Lenovo-SE30-platform/20250115-220703
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20250115140510.2017-1-mpearson-lenovo%40squebb.ca
patch subject: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
config: riscv-allmodconfig (https://download.01.org/0day-ci/archive/20250118/202501180914.vD2HyOZ2-lkp@intel.com/config)
compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project f5cd181ffbb7cb61d582fe130d46580d5969d47a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250118/202501180914.vD2HyOZ2-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202501180914.vD2HyOZ2-lkp@intel.com/

All errors (new ones prefixed by >>):

   In file included from drivers/watchdog/lenovo_se30_wdt.c:11:
   In file included from include/linux/iommu.h:10:
   In file included from include/linux/scatterlist.h:8:
   In file included from include/linux/mm.h:2223:
   include/linux/vmstat.h:504:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
     504 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     505 |                            item];
         |                            ~~~~
   include/linux/vmstat.h:511:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
     511 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     512 |                            NR_VM_NUMA_EVENT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~~
   include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
     518 |         return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
         |                               ~~~~~~~~~~~ ^ ~~~
   include/linux/vmstat.h:524:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
     524 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     525 |                            NR_VM_NUMA_EVENT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~~
>> drivers/watchdog/lenovo_se30_wdt.c:314:24: error: call to undeclared function 'ioremap_cache'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                               ^
   drivers/watchdog/lenovo_se30_wdt.c:314:24: note: did you mean 'ioremap_uc'?
   include/asm-generic/io.h:1145:29: note: 'ioremap_uc' declared here
    1145 | static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size)
         |                             ^
   include/asm-generic/io.h:1144:20: note: expanded from macro 'ioremap_uc'
    1144 | #define ioremap_uc ioremap_uc
         |                    ^
>> drivers/watchdog/lenovo_se30_wdt.c:314:22: error: incompatible integer to pointer conversion assigning to 'unsigned char *' from 'int' [-Wint-conversion]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                             ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   4 warnings and 2 errors generated.


vim +/ioremap_cache +314 drivers/watchdog/lenovo_se30_wdt.c

   276	
   277	static int lenovo_se30_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct lenovo_se30_wdt *priv;
   281		unsigned long base_phys;
   282		unsigned short val;
   283		int err;
   284	
   285		err = superio_enter(UNLOCK_KEY, SIO_REG, LNV_SE30_NAME);
   286		if (err)
   287			return err;
   288	
   289		val = superio_inb(SIO_REG, CHIPID_REG) << 8;
   290		val |= superio_inb(SIO_REG, CHIPID_REG + 1);
   291	
   292		if ((val & CHIPID_MASK) != LNV_SE30_ID) {
   293			superio_exit(LOCK_KEY, SIO_REG);
   294			return -ENODEV;
   295		}
   296	
   297		superio_outb(SIO_REG, LDN_REG, LD_NUM_SHM);
   298		base_phys = (superio_inb(SIO_REG, LD_BASE_ADDR) |
   299				 (superio_inb(SIO_REG, LD_BASE_ADDR + 1) << 8) |
   300				 (superio_inb(SIO_REG, LD_BASE_ADDR + 2) << 16) |
   301				 (superio_inb(SIO_REG, LD_BASE_ADDR + 3) << 24)) &
   302				0xFFFFFFFF;
   303	
   304		superio_exit(LOCK_KEY, SIO_REG);
   305		if (base_phys == 0xFFFFFFFF || base_phys == 0)
   306			return -ENODEV;
   307	
   308		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
   309		if (!priv)
   310			return -ENOMEM;
   311	
   312		priv->sio.base_phys = base_phys;
   313		priv->shm.base_phys = base_phys;
 > 314		priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
   315	
   316		priv->wdt_cfg.mod = WDT_MODULE;
   317		priv->wdt_cfg.idx = WDT_CFG_INDEX;
   318		priv->wdt_cnt.mod = WDT_MODULE;
   319		priv->wdt_cnt.idx = WDT_CNT_INDEX;
   320	
   321		priv->wdt.ops = &lenovo_se30_wdt_ops;
   322		priv->wdt.info = &lenovo_se30_wdt_info;
   323		priv->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
   324		priv->wdt.min_timeout = MIN_TIMEOUT;
   325		priv->wdt.max_timeout = MAX_TIMEOUT;
   326		priv->wdt.parent = dev;
   327	
   328		watchdog_init_timeout(&priv->wdt, timeout, dev);
   329		watchdog_set_drvdata(&priv->wdt, priv);
   330		watchdog_set_nowayout(&priv->wdt, nowayout);
   331		watchdog_stop_on_reboot(&priv->wdt);
   332		watchdog_stop_on_unregister(&priv->wdt);
   333	
   334		return devm_watchdog_register_device(dev, &priv->wdt);
   335	}
   336	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

[kernel test robot]

Hi Mark,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on linus/master v6.13-rc7 next-20250117]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Mark-Pearson/watchdog-lenovo_se30_wdt-Watchdog-driver-for-Lenovo-SE30-platform/20250115-220703
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link:    https://lore.kernel.org/r/20250115140510.2017-1-mpearson-lenovo%40squebb.ca
patch subject: [PATCH] watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
config: m68k-allmodconfig (https://download.01.org/0day-ci/archive/20250118/202501181145.cTfnETL4-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 14.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250118/202501181145.cTfnETL4-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202501181145.cTfnETL4-lkp@intel.com/

All errors (new ones prefixed by >>):

   drivers/watchdog/lenovo_se30_wdt.c: In function 'lenovo_se30_wdt_probe':
>> drivers/watchdog/lenovo_se30_wdt.c:314:31: error: implicit declaration of function 'ioremap_cache'; did you mean 'ioremap_uc'? [-Wimplicit-function-declaration]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                               ^~~~~~~~~~~~~
         |                               ioremap_uc
>> drivers/watchdog/lenovo_se30_wdt.c:314:29: error: assignment to 'unsigned char *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
     314 |         priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
         |                             ^


vim +314 drivers/watchdog/lenovo_se30_wdt.c

   276	
   277	static int lenovo_se30_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct lenovo_se30_wdt *priv;
   281		unsigned long base_phys;
   282		unsigned short val;
   283		int err;
   284	
   285		err = superio_enter(UNLOCK_KEY, SIO_REG, LNV_SE30_NAME);
   286		if (err)
   287			return err;
   288	
   289		val = superio_inb(SIO_REG, CHIPID_REG) << 8;
   290		val |= superio_inb(SIO_REG, CHIPID_REG + 1);
   291	
   292		if ((val & CHIPID_MASK) != LNV_SE30_ID) {
   293			superio_exit(LOCK_KEY, SIO_REG);
   294			return -ENODEV;
   295		}
   296	
   297		superio_outb(SIO_REG, LDN_REG, LD_NUM_SHM);
   298		base_phys = (superio_inb(SIO_REG, LD_BASE_ADDR) |
   299				 (superio_inb(SIO_REG, LD_BASE_ADDR + 1) << 8) |
   300				 (superio_inb(SIO_REG, LD_BASE_ADDR + 2) << 16) |
   301				 (superio_inb(SIO_REG, LD_BASE_ADDR + 3) << 24)) &
   302				0xFFFFFFFF;
   303	
   304		superio_exit(LOCK_KEY, SIO_REG);
   305		if (base_phys == 0xFFFFFFFF || base_phys == 0)
   306			return -ENODEV;
   307	
   308		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
   309		if (!priv)
   310			return -ENOMEM;
   311	
   312		priv->sio.base_phys = base_phys;
   313		priv->shm.base_phys = base_phys;
 > 314		priv->shm.base_addr = ioremap_cache(priv->shm.base_phys, SHM_WIN_SIZE);
   315	
   316		priv->wdt_cfg.mod = WDT_MODULE;
   317		priv->wdt_cfg.idx = WDT_CFG_INDEX;
   318		priv->wdt_cnt.mod = WDT_MODULE;
   319		priv->wdt_cnt.idx = WDT_CNT_INDEX;
   320	
   321		priv->wdt.ops = &lenovo_se30_wdt_ops;
   322		priv->wdt.info = &lenovo_se30_wdt_info;
   323		priv->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
   324		priv->wdt.min_timeout = MIN_TIMEOUT;
   325		priv->wdt.max_timeout = MAX_TIMEOUT;
   326		priv->wdt.parent = dev;
   327	
   328		watchdog_init_timeout(&priv->wdt, timeout, dev);
   329		watchdog_set_drvdata(&priv->wdt, priv);
   330		watchdog_set_nowayout(&priv->wdt, nowayout);
   331		watchdog_stop_on_reboot(&priv->wdt);
   332		watchdog_stop_on_unregister(&priv->wdt);
   333	
   334		return devm_watchdog_register_device(dev, &priv->wdt);
   335	}
   336	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki