From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Vadim Fedorenko <vadfed@meta.com>,
Dragos Tatulea <dtatulea@nvidia.com>,
Tariq Toukan <tariqt@nvidia.com>, Paolo Abeni <pabeni@redhat.com>,
Sasha Levin <sashal@kernel.org>,
saeedm@nvidia.com, andrew+netdev@lunn.ch, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, richardcochran@gmail.com,
rrameshbabu@nvidia.com, vadim.fedorenko@linux.dev,
netdev@vger.kernel.org, linux-rdma@vger.kernel.org
Subject: [PATCH AUTOSEL 6.13 17/35] net/mlx5: use do_aux_work for PHC overflow checks
Date: Sun, 26 Jan 2025 10:00:11 -0500 [thread overview]
Message-ID: <20250126150029.953021-17-sashal@kernel.org> (raw)
In-Reply-To: <20250126150029.953021-1-sashal@kernel.org>
From: Vadim Fedorenko <vadfed@meta.com>
[ Upstream commit e61e6c415ba9ff2b32bb6780ce1b17d1d76238f1 ]
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ethernet/mellanox/mlx5/core/lib/clock.c | 24 ++++++++++---------
include/linux/mlx5/driver.h | 1 -
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
index 4822d01123b45..d61a1a9297c90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
@@ -322,17 +322,16 @@ static void mlx5_pps_out(struct work_struct *work)
}
}
-static void mlx5_timestamp_overflow(struct work_struct *work)
+static long mlx5_timestamp_overflow(struct ptp_clock_info *ptp_info)
{
- struct delayed_work *dwork = to_delayed_work(work);
struct mlx5_core_dev *mdev;
struct mlx5_timer *timer;
struct mlx5_clock *clock;
unsigned long flags;
- timer = container_of(dwork, struct mlx5_timer, overflow_work);
- clock = container_of(timer, struct mlx5_clock, timer);
+ clock = container_of(ptp_info, struct mlx5_clock, ptp_info);
mdev = container_of(clock, struct mlx5_core_dev, clock);
+ timer = &clock->timer;
if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR)
goto out;
@@ -343,7 +342,7 @@ static void mlx5_timestamp_overflow(struct work_struct *work)
write_sequnlock_irqrestore(&clock->lock, flags);
out:
- schedule_delayed_work(&timer->overflow_work, timer->overflow_period);
+ return timer->overflow_period;
}
static int mlx5_ptp_settime_real_time(struct mlx5_core_dev *mdev,
@@ -517,6 +516,7 @@ static int mlx5_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
timer->cycles.mult = mult;
mlx5_update_clock_info_page(mdev);
write_sequnlock_irqrestore(&clock->lock, flags);
+ ptp_schedule_worker(clock->ptp, timer->overflow_period);
return 0;
}
@@ -852,6 +852,7 @@ static const struct ptp_clock_info mlx5_ptp_clock_info = {
.settime64 = mlx5_ptp_settime,
.enable = NULL,
.verify = NULL,
+ .do_aux_work = mlx5_timestamp_overflow,
};
static int mlx5_query_mtpps_pin_mode(struct mlx5_core_dev *mdev, u8 pin,
@@ -1052,12 +1053,11 @@ static void mlx5_init_overflow_period(struct mlx5_clock *clock)
do_div(ns, NSEC_PER_SEC / HZ);
timer->overflow_period = ns;
- INIT_DELAYED_WORK(&timer->overflow_work, mlx5_timestamp_overflow);
- if (timer->overflow_period)
- schedule_delayed_work(&timer->overflow_work, 0);
- else
+ if (!timer->overflow_period) {
+ timer->overflow_period = HZ;
mlx5_core_warn(mdev,
- "invalid overflow period, overflow_work is not scheduled\n");
+ "invalid overflow period, overflow_work is scheduled once per second\n");
+ }
if (clock_info)
clock_info->overflow_period = timer->overflow_period;
@@ -1172,6 +1172,9 @@ void mlx5_init_clock(struct mlx5_core_dev *mdev)
MLX5_NB_INIT(&clock->pps_nb, mlx5_pps_event, PPS_EVENT);
mlx5_eq_notifier_register(mdev, &clock->pps_nb);
+
+ if (clock->ptp)
+ ptp_schedule_worker(clock->ptp, 0);
}
void mlx5_cleanup_clock(struct mlx5_core_dev *mdev)
@@ -1188,7 +1191,6 @@ void mlx5_cleanup_clock(struct mlx5_core_dev *mdev)
}
cancel_work_sync(&clock->pps_info.out_work);
- cancel_delayed_work_sync(&clock->timer.overflow_work);
if (mdev->clock_info) {
free_page((unsigned long)mdev->clock_info);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index ea48eb879a0f5..fed666c5bd163 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -691,7 +691,6 @@ struct mlx5_timer {
struct timecounter tc;
u32 nominal_c_mult;
unsigned long overflow_period;
- struct delayed_work overflow_work;
};
struct mlx5_clock {
--
2.39.5
next prev parent reply other threads:[~2025-01-26 15:01 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-26 14:59 [PATCH AUTOSEL 6.13 01/35] wifi: ath12k: Fix for out-of bound access error Sasha Levin
2025-01-26 14:59 ` [PATCH AUTOSEL 6.13 02/35] wifi: ath12k: ath12k_mac_op_set_key(): fix uninitialized symbol 'ret' Sasha Levin
2025-01-26 14:59 ` [PATCH AUTOSEL 6.13 03/35] wifi: rtw89: add crystal_cap check to avoid setting as overflow value Sasha Levin
2025-01-26 14:59 ` [PATCH AUTOSEL 6.13 04/35] tun: fix group permission check Sasha Levin
2025-01-26 14:59 ` [PATCH AUTOSEL 6.13 05/35] mmc: core: Respect quirk_max_rate for non-UHS SDIO card Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 06/35] mmc: sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 07/35] Revert "HID: multitouch: Add support for lenovo Y9000P Touchpad" Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 08/35] wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 09/35] tomoyo: don't emit warning in tomoyo_write_control() Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 10/35] mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 11/35] wifi: rtw88: add __packed attribute to efuse layout struct Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 12/35] clk: qcom: Make GCC_8150 depend on QCOM_GDSC Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 13/35] net/mlx5: HWS, change error flow on matcher disconnect Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 14/35] net/mlx5: HWS, num_of_rules counter on matcher should be atomic Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 15/35] HID: multitouch: Add quirk for Hantick 5288 touchpad Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 16/35] HID: Wacom: Add PCI Wacom device support Sasha Levin
2025-01-26 15:00 ` Sasha Levin [this message]
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 18/35] Revert "mfd: axp20x: Allow multiple regulators" Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 19/35] wifi: brcmfmac: Check the return value of of_property_read_string_index() Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 20/35] wifi: iwlwifi: pcie: Add support for new device ids Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 21/35] wifi: iwlwifi: avoid memory leak Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 22/35] i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 23/35] APEI: GHES: Have GHES honor the panic= setting Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 24/35] Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 25/35] Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 26/35] Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925 Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 27/35] Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 28/35] net: wwan: iosm: Fix hibernation by re-binding the driver around it Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 29/35] HID: hid-asus: Disable OOBE mode on the ProArt P16 Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 30/35] mmc: sdhci-msm: Correctly set the load for the regulator Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 31/35] octeon_ep: update tx/rx stats locally for persistence Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 32/35] octeon_ep_vf: " Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 33/35] tipc: re-order conditions in tipc_crypto_key_rcv() Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 34/35] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack() Sasha Levin
2025-01-26 15:00 ` [PATCH AUTOSEL 6.13 35/35] net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250126150029.953021-17-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=dtatulea@nvidia.com \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=rrameshbabu@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=stable@vger.kernel.org \
--cc=tariqt@nvidia.com \
--cc=vadfed@meta.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox