[PATCH v1 5/6] PCI: brcmstb: Make two changes in MDIO register fields

[Jim Quinlan <james.quinlan@broadcom.com>]

The HW team has decided to "tighten" some field definitions
in the MDIO packet format.  Fortunately these two changes may
be made in a backwards compatible manner.

The CMD field used to be 12 bits and now is one.  This change is
backwards compatible because the field's starting bit position is
unchanged and the only commands we've used have values 0 and 1.

The PORT field's width has been changed from four to five bits.  When
written, the new bit is not contiguous with the other four.
Fortunately, this change is backwards compatible because we have never
used anything other than 0 for the port field's value.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 2d1969d7fd30..da7b10036948 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -176,8 +176,9 @@
 #define MDIO_PORT0			0x0
 #define MDIO_DATA_MASK			0x7fffffff
 #define MDIO_PORT_MASK			0xf0000
+#define MDIO_PORT_EXT_MASK		0x200000
 #define MDIO_REGAD_MASK			0xffff
-#define MDIO_CMD_MASK			0xfff00000
+#define MDIO_CMD_MASK			0x00100000
 #define MDIO_CMD_READ			0x1
 #define MDIO_CMD_WRITE			0x0
 #define MDIO_DATA_DONE_MASK		0x80000000
@@ -328,6 +329,7 @@ static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd)
 {
 	u32 pkt = 0;
 
+	pkt |= FIELD_PREP(MDIO_PORT_EXT_MASK, port >> 4);
 	pkt |= FIELD_PREP(MDIO_PORT_MASK, port);
 	pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad);
 	pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd);
-- 
2.43.0