* [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-06 21:18 ` Laurent Pinchart
2025-02-05 17:18 ` [PATCH v2 02/14] phy: freescale: Add MIPI CSI PHY driver " Frank Li
` (12 subsequent siblings)
13 siblings, 1 reply; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add MIPI CSI phy binding doc for i.MX8QXP, i.MX8QM and i.MX8ULP.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- Add missed fsl,imx8qm-mipi-cphy, which failback to fsl,imx8qxp-mipi-cphy
- Move reg to required. Previous 8ulp use fsl,offset in downstream version.
which should be reg. So move it to required
---
.../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
new file mode 100644
index 0000000000000..7335b9262d0e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qxp-mipi-cphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC MIPI CSI PHY
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qxp-mipi-cphy
+ - fsl,imx8ulp-mipi-cphy
+ - items:
+ - const: fsl,imx8qm-mipi-cphy
+ - const: fsl,imx8qxp-mipi-cphy
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qxp-mipi-cphy
+ then:
+ required:
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@58221000 {
+ compatible = "fsl,imx8qxp-mipi-cphy";
+ reg = <0x58221000 0x10000>;
+ #phy-cells = <0>;
+ power-domains = <&pd 0>;
+ };
+
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
2025-02-05 17:18 ` [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q Frank Li
@ 2025-02-06 21:18 ` Laurent Pinchart
2025-02-06 21:48 ` Frank Li
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2025-02-06 21:18 UTC (permalink / raw)
To: Frank Li
Cc: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Mauro Carvalho Chehab, Rui Miguel Silva, Martin Kepplinger,
Purism Kernel Team, linux-phy, devicetree, imx, linux-arm-kernel,
linux-kernel, linux-media, Guoniu.zhou, Robby Cai, Robert Chiras
Hi Frank,
Thank you for the patch.
On Wed, Feb 05, 2025 at 12:18:10PM -0500, Frank Li wrote:
> Add MIPI CSI phy binding doc for i.MX8QXP, i.MX8QM and i.MX8ULP.
s/CSI/CSI-2/ in the subject line, here and below.
s/phy/PHY/
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> change from v1 to v2
> - Add missed fsl,imx8qm-mipi-cphy, which failback to fsl,imx8qxp-mipi-cphy
> - Move reg to required. Previous 8ulp use fsl,offset in downstream version.
> which should be reg. So move it to required
> ---
> .../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 ++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> new file mode 100644
> index 0000000000000..7335b9262d0e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,imx8qxp-mipi-cphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8 SoC MIPI CSI PHY
> +
> +maintainers:
> + - Frank Li <Frank.Li@nxp.com>
> +
> +properties:
> + "#phy-cells":
> + const: 0
> +
> + compatible:
> + oneOf:
> + - enum:
> + - fsl,imx8qxp-mipi-cphy
> + - fsl,imx8ulp-mipi-cphy
> + - items:
> + - const: fsl,imx8qm-mipi-cphy
> + - const: fsl,imx8qxp-mipi-cphy
Why are those called cphy when, as far as I can tell from the
documentation, they are D-PHYs ? Does that stand for *C*SI PHY ? I find
it slightly confusing, but not so much that I'd ask for a change. It's
just a name at the end of the day.
Apart from that the binding looks fairly OK. Except maybe from the fact
that this device is not a PHY :-( It has two PHY control registers, but
the rest seems related to the glue logic at the output of the CSI-2
receiver. I wonder if we should go the syscon route.
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> +required:
> + - "#phy-cells"
> + - compatible
> + - reg
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-mipi-cphy
> + then:
> + required:
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + phy@58221000 {
> + compatible = "fsl,imx8qxp-mipi-cphy";
> + reg = <0x58221000 0x10000>;
> + #phy-cells = <0>;
> + power-domains = <&pd 0>;
> + };
> +
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
2025-02-06 21:18 ` Laurent Pinchart
@ 2025-02-06 21:48 ` Frank Li
2025-02-10 21:10 ` Laurent Pinchart
0 siblings, 1 reply; 20+ messages in thread
From: Frank Li @ 2025-02-06 21:48 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Mauro Carvalho Chehab, Rui Miguel Silva, Martin Kepplinger,
Purism Kernel Team, linux-phy, devicetree, imx, linux-arm-kernel,
linux-kernel, linux-media, Guoniu.zhou, Robby Cai, Robert Chiras
On Thu, Feb 06, 2025 at 11:18:08PM +0200, Laurent Pinchart wrote:
> Hi Frank,
>
> Thank you for the patch.
>
> On Wed, Feb 05, 2025 at 12:18:10PM -0500, Frank Li wrote:
> > Add MIPI CSI phy binding doc for i.MX8QXP, i.MX8QM and i.MX8ULP.
>
> s/CSI/CSI-2/ in the subject line, here and below.
> s/phy/PHY/
>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> > change from v1 to v2
> > - Add missed fsl,imx8qm-mipi-cphy, which failback to fsl,imx8qxp-mipi-cphy
> > - Move reg to required. Previous 8ulp use fsl,offset in downstream version.
> > which should be reg. So move it to required
> > ---
> > .../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 ++++++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > new file mode 100644
> > index 0000000000000..7335b9262d0e7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > @@ -0,0 +1,57 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/fsl,imx8qxp-mipi-cphy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale i.MX8 SoC MIPI CSI PHY
> > +
> > +maintainers:
> > + - Frank Li <Frank.Li@nxp.com>
> > +
> > +properties:
> > + "#phy-cells":
> > + const: 0
> > +
> > + compatible:
> > + oneOf:
> > + - enum:
> > + - fsl,imx8qxp-mipi-cphy
> > + - fsl,imx8ulp-mipi-cphy
> > + - items:
> > + - const: fsl,imx8qm-mipi-cphy
> > + - const: fsl,imx8qxp-mipi-cphy
>
> Why are those called cphy when, as far as I can tell from the
> documentation, they are D-PHYs ? Does that stand for *C*SI PHY ?
There are already have D-PHYS for MIPI display phy binding. cphy just means
for camera PHY.
> I find
> it slightly confusing, but not so much that I'd ask for a change. It's
> just a name at the end of the day.
>
> Apart from that the binding looks fairly OK. Except maybe from the fact
> that this device is not a PHY :-( It has two PHY control registers, but
> the rest seems related to the glue logic at the output of the CSI-2
> receiver. I wonder if we should go the syscon route.
Do you means use phandle to syscon node in csi-2 driver? Actually this
ways is not perferred by device tree team because it should be exported
as what actual function, such as PHY or RESET by use standard interface.
We met similar case at other substream.
Frank
>
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > +required:
> > + - "#phy-cells"
> > + - compatible
> > + - reg
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8qxp-mipi-cphy
> > + then:
> > + required:
> > + - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + phy@58221000 {
> > + compatible = "fsl,imx8qxp-mipi-cphy";
> > + reg = <0x58221000 0x10000>;
> > + #phy-cells = <0>;
> > + power-domains = <&pd 0>;
> > + };
> > +
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
2025-02-06 21:48 ` Frank Li
@ 2025-02-10 21:10 ` Laurent Pinchart
2025-02-11 15:25 ` Frank Li
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2025-02-10 21:10 UTC (permalink / raw)
To: Frank Li
Cc: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Mauro Carvalho Chehab, Rui Miguel Silva, Martin Kepplinger,
Purism Kernel Team, linux-phy, devicetree, imx, linux-arm-kernel,
linux-kernel, linux-media, Guoniu.zhou, Robby Cai, Robert Chiras
On Thu, Feb 06, 2025 at 04:48:55PM -0500, Frank Li wrote:
> On Thu, Feb 06, 2025 at 11:18:08PM +0200, Laurent Pinchart wrote:
> > On Wed, Feb 05, 2025 at 12:18:10PM -0500, Frank Li wrote:
> > > Add MIPI CSI phy binding doc for i.MX8QXP, i.MX8QM and i.MX8ULP.
> >
> > s/CSI/CSI-2/ in the subject line, here and below.
> > s/phy/PHY/
> >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > > change from v1 to v2
> > > - Add missed fsl,imx8qm-mipi-cphy, which failback to fsl,imx8qxp-mipi-cphy
> > > - Move reg to required. Previous 8ulp use fsl,offset in downstream version.
> > > which should be reg. So move it to required
> > > ---
> > > .../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 ++++++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > > new file mode 100644
> > > index 0000000000000..7335b9262d0e7
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > > @@ -0,0 +1,57 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/phy/fsl,imx8qxp-mipi-cphy.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Freescale i.MX8 SoC MIPI CSI PHY
> > > +
> > > +maintainers:
> > > + - Frank Li <Frank.Li@nxp.com>
> > > +
> > > +properties:
> > > + "#phy-cells":
> > > + const: 0
> > > +
> > > + compatible:
> > > + oneOf:
> > > + - enum:
> > > + - fsl,imx8qxp-mipi-cphy
> > > + - fsl,imx8ulp-mipi-cphy
> > > + - items:
> > > + - const: fsl,imx8qm-mipi-cphy
> > > + - const: fsl,imx8qxp-mipi-cphy
> >
> > Why are those called cphy when, as far as I can tell from the
> > documentation, they are D-PHYs ? Does that stand for *C*SI PHY ?
>
> There are already have D-PHYS for MIPI display phy binding. cphy just means
> for camera PHY.
Ah OK. I would probably have gone for *-mipi-dphy-rx then, but I'm OK
with the proposed "cphy". Explaining this in the description would be
useful.
> > I find
> > it slightly confusing, but not so much that I'd ask for a change. It's
> > just a name at the end of the day.
> >
> > Apart from that the binding looks fairly OK. Except maybe from the fact
> > that this device is not a PHY :-( It has two PHY control registers, but
> > the rest seems related to the glue logic at the output of the CSI-2
> > receiver. I wonder if we should go the syscon route.
>
> Do you means use phandle to syscon node in csi-2 driver? Actually this
> ways is not perferred by device tree team because it should be exported
> as what actual function, such as PHY or RESET by use standard interface.
>
> We met similar case at other substream.
I don't like syscon much either, but in this specific case I'm not sure
what else we could do. This device really aggregates some control over
the PHY and over the glue logic at the output of the CSI-2 controller.
Modelling it as "just a PHY" will cause problem as soon as you'll want
to configure the other parameters.
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + power-domains:
> > > + maxItems: 1
> > > +
> > > +required:
> > > + - "#phy-cells"
> > > + - compatible
> > > + - reg
> > > +
> > > +allOf:
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - fsl,imx8qxp-mipi-cphy
> > > + then:
> > > + required:
> > > + - power-domains
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + phy@58221000 {
> > > + compatible = "fsl,imx8qxp-mipi-cphy";
> > > + reg = <0x58221000 0x10000>;
> > > + #phy-cells = <0>;
> > > + power-domains = <&pd 0>;
> > > + };
> > > +
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q
2025-02-10 21:10 ` Laurent Pinchart
@ 2025-02-11 15:25 ` Frank Li
0 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-11 15:25 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Mauro Carvalho Chehab, Rui Miguel Silva, Martin Kepplinger,
Purism Kernel Team, linux-phy, devicetree, imx, linux-arm-kernel,
linux-kernel, linux-media, Guoniu.zhou, Robby Cai, Robert Chiras
On Mon, Feb 10, 2025 at 11:10:13PM +0200, Laurent Pinchart wrote:
> On Thu, Feb 06, 2025 at 04:48:55PM -0500, Frank Li wrote:
> > On Thu, Feb 06, 2025 at 11:18:08PM +0200, Laurent Pinchart wrote:
> > > On Wed, Feb 05, 2025 at 12:18:10PM -0500, Frank Li wrote:
> > > > Add MIPI CSI phy binding doc for i.MX8QXP, i.MX8QM and i.MX8ULP.
> > >
> > > s/CSI/CSI-2/ in the subject line, here and below.
> > > s/phy/PHY/
> > >
> > > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > > ---
> > > > change from v1 to v2
> > > > - Add missed fsl,imx8qm-mipi-cphy, which failback to fsl,imx8qxp-mipi-cphy
> > > > - Move reg to required. Previous 8ulp use fsl,offset in downstream version.
> > > > which should be reg. So move it to required
> > > > ---
> > > > .../bindings/phy/fsl,imx8qxp-mipi-cphy.yaml | 57 ++++++++++++++++++++++
> > > > 1 file changed, 57 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > > > new file mode 100644
> > > > index 0000000000000..7335b9262d0e7
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qxp-mipi-cphy.yaml
> > > > @@ -0,0 +1,57 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/phy/fsl,imx8qxp-mipi-cphy.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Freescale i.MX8 SoC MIPI CSI PHY
> > > > +
> > > > +maintainers:
> > > > + - Frank Li <Frank.Li@nxp.com>
> > > > +
> > > > +properties:
> > > > + "#phy-cells":
> > > > + const: 0
> > > > +
> > > > + compatible:
> > > > + oneOf:
> > > > + - enum:
> > > > + - fsl,imx8qxp-mipi-cphy
> > > > + - fsl,imx8ulp-mipi-cphy
> > > > + - items:
> > > > + - const: fsl,imx8qm-mipi-cphy
> > > > + - const: fsl,imx8qxp-mipi-cphy
> > >
> > > Why are those called cphy when, as far as I can tell from the
> > > documentation, they are D-PHYs ? Does that stand for *C*SI PHY ?
> >
> > There are already have D-PHYS for MIPI display phy binding. cphy just means
> > for camera PHY.
>
> Ah OK. I would probably have gone for *-mipi-dphy-rx then, but I'm OK
> with the proposed "cphy". Explaining this in the description would be
> useful.
>
> > > I find
> > > it slightly confusing, but not so much that I'd ask for a change. It's
> > > just a name at the end of the day.
> > >
> > > Apart from that the binding looks fairly OK. Except maybe from the fact
> > > that this device is not a PHY :-( It has two PHY control registers, but
> > > the rest seems related to the glue logic at the output of the CSI-2
> > > receiver. I wonder if we should go the syscon route.
> >
> > Do you means use phandle to syscon node in csi-2 driver? Actually this
> > ways is not perferred by device tree team because it should be exported
> > as what actual function, such as PHY or RESET by use standard interface.
> >
> > We met similar case at other substream.
>
> I don't like syscon much either, but in this specific case I'm not sure
> what else we could do. This device really aggregates some control over
> the PHY and over the glue logic at the output of the CSI-2 controller.
> Modelling it as "just a PHY" will cause problem as soon as you'll want
> to configure the other parameters.
I think your comments is quite good and it's one hack. I check register
layout of csr at imx8qm/imx8qxp. It is dedicated for each csi2 moudule.
This glue layer should be second 'reg' resource, which direct control in
csi2's driver.
v3 should be simpler than this version.
https://lore.kernel.org/imx/20250210-8qxp_camera-v3-0-324f5105accc@nxp.com/T/#t
Frank
>
> > > > +
> > > > + reg:
> > > > + maxItems: 1
> > > > +
> > > > + power-domains:
> > > > + maxItems: 1
> > > > +
> > > > +required:
> > > > + - "#phy-cells"
> > > > + - compatible
> > > > + - reg
> > > > +
> > > > +allOf:
> > > > + - if:
> > > > + properties:
> > > > + compatible:
> > > > + contains:
> > > > + enum:
> > > > + - fsl,imx8qxp-mipi-cphy
> > > > + then:
> > > > + required:
> > > > + - power-domains
> > > > +
> > > > +additionalProperties: false
> > > > +
> > > > +examples:
> > > > + - |
> > > > + phy@58221000 {
> > > > + compatible = "fsl,imx8qxp-mipi-cphy";
> > > > + reg = <0x58221000 0x10000>;
> > > > + #phy-cells = <0>;
> > > > + power-domains = <&pd 0>;
> > > > + };
> > > > +
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 02/14] phy: freescale: Add MIPI CSI PHY driver for i.MX8Q
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
2025-02-05 17:18 ` [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-06 21:43 ` Laurent Pinchart
2025-02-05 17:18 ` [PATCH v2 03/14] dt-bindings: firmware: imx: add property reset-controller Frank Li
` (11 subsequent siblings)
13 siblings, 1 reply; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add MIPI CSI PHY driver for i.MX8QM, i.MX8QXP.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- remove un-test code for 8ulp.
- remove unused regiser define
---
drivers/phy/freescale/Kconfig | 9 ++
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c | 185 ++++++++++++++++++++++++
3 files changed, 195 insertions(+)
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index dcd9acff6d01a..f412fa405b9b6 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,15 @@ config PHY_FSL_IMX8M_PCIE
Enable this to add support for the PCIE PHY as found on
i.MX8M family of SOCs.
+config PHY_FSL_IMX8Q_MIPI_CPHY
+ tristate "Freescale MIPI CSI PHY support"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Enable this to add support for the MIPI CSI PHY as found
+ on NXP's i.MX8 family of SOCs.
+
config PHY_FSL_IMX8QM_HSIO
tristate "Freescale i.MX8QM HSIO PHY"
depends on OF && HAS_IOMEM
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index 658eac7d0a622..8ff72dfdcf654 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
+obj-$(CONFIG_PHY_FSL_IMX8Q_MIPI_CPHY) += phy-fsl-imx8q-mipi-cphy.o
obj-$(CONFIG_PHY_FSL_IMX8QM_HSIO) += phy-fsl-imx8qm-hsio.o
obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c b/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c
new file mode 100644
index 0000000000000..3137c89eab057
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 NXP
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct imx8_mipi_phy {
+ struct phy *phy;
+ struct device *dev;
+ struct regmap *phy_gpr;
+ int speed;
+ const struct imx8_mipi_drvdata *drvdata;
+};
+
+#define CSI2SS_PL_CLK_INTERVAL_US 10000
+#define CSI2SS_PL_CLK_TIMEOUT_US 100000
+
+#define CSI2SS_PLM_CTRL 0x0
+#define CSI2SS_PLM_CTRL_PL_CLK_RUN BIT(31)
+#define CSI2SS_PLM_CTRL_VSYNC_OVERRIDE BIT(9)
+#define CSI2SS_PLM_CTRL_HSYNC_OVERRIDE BIT(10)
+#define CSI2SS_PLM_CTRL_VALID_OVERRIDE BIT(11)
+#define CSI2SS_PLM_CTRL_POLARITY_MASK BIT(12)
+#define CSI2SS_PLM_CTRL_ENABLE_PL BIT(0)
+
+#define CSI2SS_PHY_CTRL 0x4
+#define CSI2SS_PHY_CTRL_PD BIT(22)
+#define CSI2SS_PHY_CTRL_RTERM_SEL BIT(21)
+#define CSI2SS_PLM_CTRL_POLARITY BIT(12)
+#define CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK GENMASK(9, 4)
+#define CSI2SS_PHY_CTRL_CONT_CLK_MODE BIT(3)
+#define CSI2SS_PHY_CTRL_DDRCLK_EN BIT(2)
+#define CSI2SS_PHY_CTRL_AUTO_PD_EN BIT(1)
+#define CSI2SS_PHY_CTRL_RX_ENABLE BIT(0)
+
+#define CSI2SS_DATA_TYPE 0x38
+#define CSI2SS_DATA_TYPE_MASK GENMASK(23, 0)
+
+#define CSI2SS_CTRL_CLK_RESET 0x44
+#define CSI2SS_CTRL_CLK_RESET_EN BIT(0)
+
+static int imx8_mipi_phy_power_on(struct phy *phy)
+{
+ struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ /* clear format */
+ regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_DATA_TYPE, CSI2SS_DATA_TYPE_MASK);
+
+ /* clear polarity */
+ regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
+ CSI2SS_PLM_CTRL_VSYNC_OVERRIDE |
+ CSI2SS_PLM_CTRL_HSYNC_OVERRIDE |
+ CSI2SS_PLM_CTRL_VALID_OVERRIDE |
+ CSI2SS_PLM_CTRL_POLARITY_MASK);
+
+ regmap_update_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL, CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK,
+ FIELD_PREP(CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK, imx8_phy->speed));
+
+ regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL,
+ CSI2SS_PHY_CTRL_RX_ENABLE | CSI2SS_PHY_CTRL_DDRCLK_EN |
+ CSI2SS_PHY_CTRL_CONT_CLK_MODE | CSI2SS_PHY_CTRL_PD |
+ CSI2SS_PHY_CTRL_RTERM_SEL | CSI2SS_PHY_CTRL_AUTO_PD_EN);
+
+ ret = regmap_read_poll_timeout(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
+ val, !(val & CSI2SS_PLM_CTRL_PL_CLK_RUN),
+ CSI2SS_PL_CLK_INTERVAL_US,
+ CSI2SS_PL_CLK_TIMEOUT_US);
+
+ if (ret) {
+ dev_err(imx8_phy->dev, "Timeout waiting for Pixel-Link clock");
+ return ret;
+ }
+
+ /* Enable Pixel link Master*/
+ regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
+ CSI2SS_PLM_CTRL_ENABLE_PL | CSI2SS_PLM_CTRL_VALID_OVERRIDE);
+
+ /* PHY Enable */
+ regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL,
+ CSI2SS_PHY_CTRL_PD | CSI2SS_PLM_CTRL_POLARITY);
+
+ /* Release Reset */
+ regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_CTRL_CLK_RESET, CSI2SS_CTRL_CLK_RESET_EN);
+
+ return ret;
+}
+
+static int imx8_mipi_phy_power_off(struct phy *phy)
+{
+ struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
+
+ /* Disable Pixel Link */
+ regmap_write(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL, 0x0);
+
+ /* Disable PHY */
+ regmap_write(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL, 0x0);
+
+ return 0;
+};
+
+static int imx8_mipi_phy_set_speed(struct phy *phy, int speed)
+{
+ struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
+
+ imx8_phy->speed = speed;
+
+ return 0;
+}
+
+static const struct phy_ops imx8_mipi_phy_ops = {
+ .power_on = imx8_mipi_phy_power_on,
+ .power_off = imx8_mipi_phy_power_off,
+ .set_speed = imx8_mipi_phy_set_speed,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id imx8_mipi_phy_of_match[] = {
+ { .compatible = "fsl,imx8qxp-mipi-cphy" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, imx8_mipi_phy_of_match);
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int imx8_mipi_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct imx8_mipi_phy *imx8_phy;
+ void __iomem *base;
+
+ imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
+ if (!imx8_phy)
+ return -ENOMEM;
+
+ imx8_phy->dev = dev;
+ imx8_phy->drvdata = of_device_get_match_data(dev);
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return dev_err_probe(dev, IS_ERR(base), "missed phy base register\n");
+
+ imx8_phy->phy_gpr = devm_regmap_init_mmio(dev, base, ®map_config);
+ if (IS_ERR(imx8_phy->phy_gpr))
+ return dev_err_probe(dev, PTR_ERR(imx8_phy->phy_gpr),
+ "unable to find iomuxc registers\n");
+
+ imx8_phy->phy = devm_phy_create(dev, NULL, &imx8_mipi_phy_ops);
+ if (IS_ERR(imx8_phy->phy))
+ return PTR_ERR(imx8_phy->phy);
+
+ phy_set_drvdata(imx8_phy->phy, imx8_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver imx8_mipi_phy_driver = {
+ .probe = imx8_mipi_phy_probe,
+ .driver = {
+ .name = "imx8-mipi-cphy",
+ .of_match_table = imx8_mipi_phy_of_match,
+ }
+};
+module_platform_driver(imx8_mipi_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8 MIPI CSI PHY driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v2 02/14] phy: freescale: Add MIPI CSI PHY driver for i.MX8Q
2025-02-05 17:18 ` [PATCH v2 02/14] phy: freescale: Add MIPI CSI PHY driver " Frank Li
@ 2025-02-06 21:43 ` Laurent Pinchart
0 siblings, 0 replies; 20+ messages in thread
From: Laurent Pinchart @ 2025-02-06 21:43 UTC (permalink / raw)
To: Frank Li
Cc: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Mauro Carvalho Chehab, Rui Miguel Silva, Martin Kepplinger,
Purism Kernel Team, linux-phy, devicetree, imx, linux-arm-kernel,
linux-kernel, linux-media, Guoniu.zhou, Robby Cai, Robert Chiras
Hi Frank,
Thank you for the patch.
On Wed, Feb 05, 2025 at 12:18:11PM -0500, Frank Li wrote:
> Add MIPI CSI PHY driver for i.MX8QM, i.MX8QXP.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Change from v1 to v2
> - remove un-test code for 8ulp.
> - remove unused regiser define
> ---
> drivers/phy/freescale/Kconfig | 9 ++
> drivers/phy/freescale/Makefile | 1 +
> drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c | 185 ++++++++++++++++++++++++
> 3 files changed, 195 insertions(+)
>
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index dcd9acff6d01a..f412fa405b9b6 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,15 @@ config PHY_FSL_IMX8M_PCIE
> Enable this to add support for the PCIE PHY as found on
> i.MX8M family of SOCs.
>
> +config PHY_FSL_IMX8Q_MIPI_CPHY
> + tristate "Freescale MIPI CSI PHY support"
> + depends on OF && HAS_IOMEM
> + select GENERIC_PHY
> + select REGMAP_MMIO
> + help
> + Enable this to add support for the MIPI CSI PHY as found
> + on NXP's i.MX8 family of SOCs.
> +
> config PHY_FSL_IMX8QM_HSIO
> tristate "Freescale i.MX8QM HSIO PHY"
> depends on OF && HAS_IOMEM
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index 658eac7d0a622..8ff72dfdcf654 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
> obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
> obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
> obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
> +obj-$(CONFIG_PHY_FSL_IMX8Q_MIPI_CPHY) += phy-fsl-imx8q-mipi-cphy.o
> obj-$(CONFIG_PHY_FSL_IMX8QM_HSIO) += phy-fsl-imx8qm-hsio.o
> obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
> obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c b/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c
> new file mode 100644
> index 0000000000000..3137c89eab057
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-imx8q-mipi-cphy.c
> @@ -0,0 +1,185 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2025 NXP
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +struct imx8_mipi_phy {
> + struct phy *phy;
> + struct device *dev;
> + struct regmap *phy_gpr;
> + int speed;
> + const struct imx8_mipi_drvdata *drvdata;
> +};
> +
> +#define CSI2SS_PL_CLK_INTERVAL_US 10000
> +#define CSI2SS_PL_CLK_TIMEOUT_US 100000
> +
> +#define CSI2SS_PLM_CTRL 0x0
> +#define CSI2SS_PLM_CTRL_PL_CLK_RUN BIT(31)
> +#define CSI2SS_PLM_CTRL_VSYNC_OVERRIDE BIT(9)
> +#define CSI2SS_PLM_CTRL_HSYNC_OVERRIDE BIT(10)
> +#define CSI2SS_PLM_CTRL_VALID_OVERRIDE BIT(11)
> +#define CSI2SS_PLM_CTRL_POLARITY_MASK BIT(12)
> +#define CSI2SS_PLM_CTRL_ENABLE_PL BIT(0)
> +
> +#define CSI2SS_PHY_CTRL 0x4
> +#define CSI2SS_PHY_CTRL_PD BIT(22)
> +#define CSI2SS_PHY_CTRL_RTERM_SEL BIT(21)
> +#define CSI2SS_PLM_CTRL_POLARITY BIT(12)
> +#define CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK GENMASK(9, 4)
> +#define CSI2SS_PHY_CTRL_CONT_CLK_MODE BIT(3)
> +#define CSI2SS_PHY_CTRL_DDRCLK_EN BIT(2)
> +#define CSI2SS_PHY_CTRL_AUTO_PD_EN BIT(1)
> +#define CSI2SS_PHY_CTRL_RX_ENABLE BIT(0)
> +
> +#define CSI2SS_DATA_TYPE 0x38
> +#define CSI2SS_DATA_TYPE_MASK GENMASK(23, 0)
> +
> +#define CSI2SS_CTRL_CLK_RESET 0x44
> +#define CSI2SS_CTRL_CLK_RESET_EN BIT(0)
> +
> +static int imx8_mipi_phy_power_on(struct phy *phy)
> +{
> + struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + /* clear format */
> + regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_DATA_TYPE, CSI2SS_DATA_TYPE_MASK);
> +
> + /* clear polarity */
> + regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
> + CSI2SS_PLM_CTRL_VSYNC_OVERRIDE |
> + CSI2SS_PLM_CTRL_HSYNC_OVERRIDE |
> + CSI2SS_PLM_CTRL_VALID_OVERRIDE |
> + CSI2SS_PLM_CTRL_POLARITY_MASK);
> +
> + regmap_update_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL, CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK,
> + FIELD_PREP(CSI2SS_PHY_CTRL_RX_HS_SETTLE_MASK, imx8_phy->speed));
Quite annoying the .set_speed() operation is badly documented, the speed
unit is not specified. Wouldn't it still be better to pass the speed as
a link frequency in Hz, and do the conversion here ?
> +
> + regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL,
> + CSI2SS_PHY_CTRL_RX_ENABLE | CSI2SS_PHY_CTRL_DDRCLK_EN |
> + CSI2SS_PHY_CTRL_CONT_CLK_MODE | CSI2SS_PHY_CTRL_PD |
> + CSI2SS_PHY_CTRL_RTERM_SEL | CSI2SS_PHY_CTRL_AUTO_PD_EN);
> +
> + ret = regmap_read_poll_timeout(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
> + val, !(val & CSI2SS_PLM_CTRL_PL_CLK_RUN),
> + CSI2SS_PL_CLK_INTERVAL_US,
> + CSI2SS_PL_CLK_TIMEOUT_US);
> +
> + if (ret) {
> + dev_err(imx8_phy->dev, "Timeout waiting for Pixel-Link clock");
> + return ret;
> + }
> +
> + /* Enable Pixel link Master*/
> + regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL,
> + CSI2SS_PLM_CTRL_ENABLE_PL | CSI2SS_PLM_CTRL_VALID_OVERRIDE);
> +
> + /* PHY Enable */
> + regmap_clear_bits(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL,
> + CSI2SS_PHY_CTRL_PD | CSI2SS_PLM_CTRL_POLARITY);
While this register is PHY-related, the others are not. They control the
pixel link interface at the output of the CSI-2 receiver, the clock
gate, or the VC/DT filtering. Modeling all this as a PHY driver works
for now, but it's a hack. How will this support other features in the
future ?
> +
> + /* Release Reset */
> + regmap_set_bits(imx8_phy->phy_gpr, CSI2SS_CTRL_CLK_RESET, CSI2SS_CTRL_CLK_RESET_EN);
> +
> + return ret;
> +}
> +
> +static int imx8_mipi_phy_power_off(struct phy *phy)
> +{
> + struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
> +
> + /* Disable Pixel Link */
> + regmap_write(imx8_phy->phy_gpr, CSI2SS_PLM_CTRL, 0x0);
> +
> + /* Disable PHY */
> + regmap_write(imx8_phy->phy_gpr, CSI2SS_PHY_CTRL, 0x0);
> +
> + return 0;
> +};
> +
> +static int imx8_mipi_phy_set_speed(struct phy *phy, int speed)
> +{
> + struct imx8_mipi_phy *imx8_phy = phy_get_drvdata(phy);
> +
> + imx8_phy->speed = speed;
> +
> + return 0;
> +}
> +
> +static const struct phy_ops imx8_mipi_phy_ops = {
> + .power_on = imx8_mipi_phy_power_on,
> + .power_off = imx8_mipi_phy_power_off,
> + .set_speed = imx8_mipi_phy_set_speed,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id imx8_mipi_phy_of_match[] = {
> + { .compatible = "fsl,imx8qxp-mipi-cphy" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, imx8_mipi_phy_of_match);
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> +static int imx8_mipi_phy_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct imx8_mipi_phy *imx8_phy;
> + void __iomem *base;
> +
> + imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
> + if (!imx8_phy)
> + return -ENOMEM;
> +
> + imx8_phy->dev = dev;
> + imx8_phy->drvdata = of_device_get_match_data(dev);
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return dev_err_probe(dev, IS_ERR(base), "missed phy base register\n");
> +
> + imx8_phy->phy_gpr = devm_regmap_init_mmio(dev, base, ®map_config);
> + if (IS_ERR(imx8_phy->phy_gpr))
> + return dev_err_probe(dev, PTR_ERR(imx8_phy->phy_gpr),
> + "unable to find iomuxc registers\n");
> +
> + imx8_phy->phy = devm_phy_create(dev, NULL, &imx8_mipi_phy_ops);
> + if (IS_ERR(imx8_phy->phy))
> + return PTR_ERR(imx8_phy->phy);
> +
> + phy_set_drvdata(imx8_phy->phy, imx8_phy);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct platform_driver imx8_mipi_phy_driver = {
> + .probe = imx8_mipi_phy_probe,
> + .driver = {
> + .name = "imx8-mipi-cphy",
> + .of_match_table = imx8_mipi_phy_of_match,
> + }
> +};
> +module_platform_driver(imx8_mipi_phy_driver);
> +
> +MODULE_DESCRIPTION("FSL IMX8 MIPI CSI PHY driver");
> +MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 03/14] dt-bindings: firmware: imx: add property reset-controller
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
2025-02-05 17:18 ` [PATCH v2 01/14] dt-bindings: phy: Add MIPI CSI PHY for i.MX8Q Frank Li
2025-02-05 17:18 ` [PATCH v2 02/14] phy: freescale: Add MIPI CSI PHY driver " Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 04/14] reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM Frank Li
` (10 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
System Controller Firmware(SCU) reset some peripherals, such as CSI. So add
reset-controller for it.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- new patch, move reset-controller in top fsl,scu.yaml
---
Documentation/devicetree/bindings/firmware/fsl,scu.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
index 557e524786c22..f9ba18f063692 100644
--- a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -45,6 +45,18 @@ properties:
Keys provided by the SCU
$ref: /schemas/input/fsl,scu-key.yaml
+ reset-controller:
+ type: object
+ properties:
+ compatible:
+ const: fsl,imx-scu-reset
+ '#reset-cells':
+ const: 1
+ required:
+ - compatible
+ - '#reset-cells'
+ additionalProperties: false
+
mboxes:
description:
A list of phandles of TX MU channels followed by a list of phandles of
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 04/14] reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (2 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 03/14] dt-bindings: firmware: imx: add property reset-controller Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 05/14] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
` (9 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP.
SCU Manage resets for peripherals such as MIPI CSI. Currently, support two
reset sources: IMX_SC_R_CSI_0 and IMX_SC_R_CSI_1.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
drivers/reset/Kconfig | 7 +++
drivers/reset/Makefile | 1 +
drivers/reset/reset-imx-scu.c | 101 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 5b3abb6db2489..99f6f9784e686 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -96,6 +96,13 @@ config RESET_HSDK
help
This enables the reset controller driver for HSDK board.
+config RESET_IMX_SCU
+ tristate "i.MX8Q Reset Driver"
+ depends on IMX_SCU && HAVE_ARM_SMCCC
+ depends on (ARM64 && ARCH_MXC) || COMPILE_TEST
+ help
+ This enables the reset controller driver for i.MX8QM/i.MX8QXP
+
config RESET_IMX7
tristate "i.MX7/8 Reset Driver"
depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 677c4d1e26320..31f9904d13f9c 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
obj-$(CONFIG_RESET_EYEQ) += reset-eyeq.o
obj-$(CONFIG_RESET_GPIO) += reset-gpio.o
obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
+obj-$(CONFIG_RESET_IMX_SCU) += reset-imx-scu.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_IMX8MP_AUDIOMIX) += reset-imx8mp-audiomix.o
obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
diff --git a/drivers/reset/reset-imx-scu.c b/drivers/reset/reset-imx-scu.c
new file mode 100644
index 0000000000000..d3074eaad4c99
--- /dev/null
+++ b/drivers/reset/reset-imx-scu.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 NXP
+ * Frank Li <Frank.Li@nxp.com>
+ */
+#include <linux/firmware/imx/svc/misc.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+struct imx_scu_reset {
+ struct reset_controller_dev rc;
+ struct imx_sc_ipc *ipc_handle;
+};
+
+static struct imx_scu_reset *to_imx_scu(struct reset_controller_dev *rc)
+{
+ return container_of(rc, struct imx_scu_reset, rc);
+}
+
+struct imx_scu_id_map {
+ u32 resource_id;
+ u32 command_id;
+};
+
+static const struct imx_scu_id_map imx_scu_id_map[] = {
+ { IMX_SC_R_CSI_0, IMX_SC_C_MIPI_RESET },
+ { IMX_SC_R_CSI_1, IMX_SC_C_MIPI_RESET },
+};
+
+static int imx_scu_reset_assert(struct reset_controller_dev *rc, unsigned long id)
+{
+ struct imx_scu_reset *priv = to_imx_scu(rc);
+
+ return imx_sc_misc_set_control(priv->ipc_handle, imx_scu_id_map[id].resource_id,
+ imx_scu_id_map[id].command_id, true);
+}
+
+static const struct reset_control_ops imx_scu_reset_ops = {
+ .assert = imx_scu_reset_assert,
+};
+
+static int imx_scu_xlate(struct reset_controller_dev *rc, const struct of_phandle_args *reset_spec)
+{
+ int i;
+
+ for (i = 0; i < rc->nr_resets; i++)
+ if (reset_spec->args[0] == imx_scu_id_map[i].resource_id)
+ return i;
+
+ return -EINVAL;
+}
+
+static int imx_scu_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx_scu_reset *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, &priv->rc);
+
+ ret = imx_scu_get_handle(&priv->ipc_handle);
+ if (ret)
+ return dev_err_probe(dev, ret, "sc_misc_MIPI get ipc handle failed!\n");
+
+ priv->rc.ops = &imx_scu_reset_ops;
+ priv->rc.owner = THIS_MODULE;
+ priv->rc.of_node = dev->of_node;
+ priv->rc.of_reset_n_cells = 1;
+ priv->rc.of_xlate = imx_scu_xlate;
+ priv->rc.nr_resets = ARRAY_SIZE(imx_scu_id_map);
+
+ return devm_reset_controller_register(dev, &priv->rc);
+}
+
+static const struct of_device_id imx_scu_reset_ids[] = {
+ { .compatible = "fsl,imx-scu-reset", },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, imx_scu_reset_ids);
+
+static struct platform_driver imx_scu_reset_driver = {
+ .probe = imx_scu_reset_probe,
+ .driver = {
+ .name = "scu-reset",
+ .of_match_table = imx_scu_reset_ids,
+ },
+};
+module_platform_driver(imx_scu_reset_driver);
+
+MODULE_AUTHOR("Frank Li <Frank.Li@nxp.com>");
+MODULE_DESCRIPTION("i.MX scu reset driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 05/14] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (3 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 04/14] reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 06/14] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
` (8 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add binding documentation for i.MX8QXP and i.MX8QM ISI. The clock-names,
power-domains, and ports differ significantly from the existing
nxp,imx8-isi.yaml. Create a new file to avoid complex if-else branches.
Add new file to MAINTAINERS.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- create new file for 8qm and 8qxp accroding rob's suggestion.
---
.../devicetree/bindings/media/fsl,imx8qm-isi.yaml | 117 +++++++++++++++++++++
.../devicetree/bindings/media/fsl,imx8qxp-isi.yaml | 103 ++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 221 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
new file mode 100644
index 0000000000000..61c551673e2a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QM Image Sensing Interface
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ The Image Sensing Interface (ISI) combines image processing pipelines with
+ DMA engines to process and capture frames originating from a variety of
+ sources. The inputs to the ISI go through Pixel Link interfaces, and their
+ number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+ CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-isi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: per0
+ - const: per1
+ - const: per2
+ - const: per3
+ - const: per4
+ - const: per5
+ - const: per6
+ - const: per7
+
+ interrupts:
+ maxItems: 8
+
+ power-domains:
+ maxItems: 8
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 0
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 1
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI RX
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ image-controller@58100000 {
+ compatible = "fsl,imx8qm-isi";
+ reg = <0x58100000 0x90000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3",
+ "per4", "per5", "per6", "per7";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
new file mode 100644
index 0000000000000..818fea0e4679f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP Image Sensing Interface
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ The Image Sensing Interface (ISI) combines image processing pipelines with
+ DMA engines to process and capture frames originating from a variety of
+ sources. The inputs to the ISI go through Pixel Link interfaces, and their
+ number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+ CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-isi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: per0
+ - const: per4
+ - const: per5
+ - const: per6
+ - const: per7
+
+ interrupts:
+ maxItems: 5
+
+ power-domains:
+ maxItems: 5
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 0
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CSI-2 Parallel RX
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ image-controller@58100000 {
+ compatible = "fsl,imx8qxp-isi";
+ reg = <0x58100000 0x90000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per4", "per5", "per6", "per7";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>, <&pd IMX_SC_R_ISI_CH6>,
+ <&pd IMX_SC_R_ISI_CH7>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 40d1b7ec30fde..f243257ef7653 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17000,6 +17000,7 @@ NXP i.MX 8M ISI DRIVER
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/media/fsl,imx8*-isi.yaml
F: Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
F: drivers/media/platform/nxp/imx8-isi/
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 06/14] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (4 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 05/14] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 07/14] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
` (7 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Allow num_sources (drvdata: num_channels) to be greater than num_sink
(drvdata: num_ports + 1).
ISI support stream multiplexing, such as differentiates multiple cameras
from a single 2-lane MIPI input, or duplicates input stream into multiple
outputs. So num_channels may be greater than num_ports at some platform.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
index 93a55c97cd173..ba5b2d3617a23 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
@@ -188,11 +188,11 @@ static int mxc_isi_crossbar_init_state(struct v4l2_subdev *sd,
* Create a 1:1 mapping between pixel link inputs and outputs to
* pipelines by default.
*/
- routes = kcalloc(xbar->num_sources, sizeof(*routes), GFP_KERNEL);
+ routes = kcalloc(xbar->num_sinks - 1, sizeof(*routes), GFP_KERNEL);
if (!routes)
return -ENOMEM;
- for (i = 0; i < xbar->num_sources; ++i) {
+ for (i = 0; i < xbar->num_sinks - 1; ++i) {
struct v4l2_subdev_route *route = &routes[i];
route->sink_pad = i;
@@ -200,7 +200,7 @@ static int mxc_isi_crossbar_init_state(struct v4l2_subdev *sd,
route->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
}
- routing.num_routes = xbar->num_sources;
+ routing.num_routes = xbar->num_sinks - 1;
routing.routes = routes;
ret = __mxc_isi_crossbar_set_routing(sd, state, &routing);
@@ -453,7 +453,7 @@ int mxc_isi_crossbar_init(struct mxc_isi_dev *isi)
* the memory input.
*/
xbar->num_sinks = isi->pdata->num_ports + 1;
- xbar->num_sources = isi->pdata->num_ports;
+ xbar->num_sources = isi->pdata->num_channels;
num_pads = xbar->num_sinks + xbar->num_sources;
xbar->pads = kcalloc(num_pads, sizeof(*xbar->pads), GFP_KERNEL);
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 07/14] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (5 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 06/14] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 08/14] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
` (6 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
From: Robert Chiras <robert.chiras@nxp.com>
Add compatibles and platform data for i.MX8QM and i.MX8QXP platforms.
There are 8 ISI channels on i.MX8QM while there are only 5 channels on
i.MX8QXP.
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- remove intenal review tags
---
.../media/platform/nxp/imx8-isi/imx8-isi-core.c | 47 ++++++++++++++++++++++
.../media/platform/nxp/imx8-isi/imx8-isi-core.h | 2 +
2 files changed, 49 insertions(+)
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
index 1e79b1211b603..a3237d76f7aa5 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
@@ -274,6 +274,25 @@ static const struct mxc_isi_set_thd mxc_imx8_isi_thd_v1 = {
.panic_set_thd_v = { .mask = 0xf0000, .offset = 16, .threshold = 0x7 },
};
+static const struct clk_bulk_data mxc_imx8qm_clks[] = {
+ { .id = "per0" },
+ { .id = "per1" },
+ { .id = "per2" },
+ { .id = "per3" },
+ { .id = "per4" },
+ { .id = "per5" },
+ { .id = "per6" },
+ { .id = "per7" },
+};
+
+static const struct clk_bulk_data mxc_imx8qxp_clks[] = {
+ { .id = "per0" },
+ { .id = "per4" },
+ { .id = "per5" },
+ { .id = "per6" },
+ { .id = "per7" },
+};
+
static const struct clk_bulk_data mxc_imx8mn_clks[] = {
{ .id = "axi" },
{ .id = "apb" },
@@ -334,6 +353,32 @@ static const struct mxc_isi_plat_data mxc_imx93_data = {
.has_36bit_dma = false,
};
+static const struct mxc_isi_plat_data mxc_imx8qm_data = {
+ .model = MXC_ISI_IMX8QM,
+ .num_ports = 5,
+ .num_channels = 8,
+ .reg_offset = 0x10000,
+ .ier_reg = &mxc_imx8_isi_ier_v1,
+ .set_thd = &mxc_imx8_isi_thd_v1,
+ .clks = mxc_imx8qm_clks,
+ .num_clks = ARRAY_SIZE(mxc_imx8qm_clks),
+ .buf_active_reverse = true,
+ .has_36bit_dma = false,
+};
+
+static const struct mxc_isi_plat_data mxc_imx8qxp_data = {
+ .model = MXC_ISI_IMX8QXP,
+ .num_ports = 5,
+ .num_channels = 5,
+ .reg_offset = 0x10000,
+ .ier_reg = &mxc_imx8_isi_ier_v1,
+ .set_thd = &mxc_imx8_isi_thd_v1,
+ .clks = mxc_imx8qxp_clks,
+ .num_clks = ARRAY_SIZE(mxc_imx8qxp_clks),
+ .buf_active_reverse = true,
+ .has_36bit_dma = false,
+};
+
/* -----------------------------------------------------------------------------
* Power management
*/
@@ -541,6 +586,8 @@ static void mxc_isi_remove(struct platform_device *pdev)
static const struct of_device_id mxc_isi_of_match[] = {
{ .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
{ .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
+ { .compatible = "fsl,imx8qm-isi", .data = &mxc_imx8qm_data },
+ { .compatible = "fsl,imx8qxp-isi", .data = &mxc_imx8qxp_data },
{ .compatible = "fsl,imx8ulp-isi", .data = &mxc_imx8ulp_data },
{ .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
{ /* sentinel */ },
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
index 9c7fe9e5f941f..496cad3f9423d 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
@@ -158,6 +158,8 @@ struct mxc_gasket_ops {
enum model {
MXC_ISI_IMX8MN,
MXC_ISI_IMX8MP,
+ MXC_ISI_IMX8QM,
+ MXC_ISI_IMX8QXP,
MXC_ISI_IMX8ULP,
MXC_ISI_IMX93,
};
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 08/14] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (6 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 07/14] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 09/14] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
` (5 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
From: Robert Chiras <robert.chiras@nxp.com>
Add compatible strings for i.MX8QM/i.MX8QXP platform. Remove
fsl,mipi-phy-gpr from required properties and add 'phys', since i.MX8QM and
i.MX8QXP use standard phy interface.
Keep the same restriction for other compatible strings.
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- remove internal review tags
- remove reg maxitems:1
- remove 8ulp part
- add 8qxp compatible string and make 8qm failback to 8qxp
- limit reset and power domain number to 1 for 8qxp and 8qm
- remove power-domains change because 8qm/8qxp only need 1 power domain
---
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 34 ++++++++++++++++++++--
1 file changed, 31 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 2a14e3b0e0040..ae0654027182b 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -16,8 +16,13 @@ description: |-
properties:
compatible:
- enum:
- - fsl,imx8mq-mipi-csi2
+ oneOf:
+ - enum:
+ - fsl,imx8mq-mipi-csi2
+ - fsl,imx8qxp-mipi-csi2
+ - items:
+ - const: fsl,imx8qm-mipi-csi2
+ - const: fsl,imx8qxp-mipi-csi2
reg:
maxItems: 1
@@ -46,6 +51,10 @@ properties:
- description: CORE_RESET reset register bit definition
- description: PHY_REF_RESET reset register bit definition
- description: ESC_RESET reset register bit definition
+ minItems: 1
+
+ phys:
+ maxItems: 1
fsl,mipi-phy-gpr:
description: |
@@ -113,9 +122,28 @@ required:
- clock-names
- power-domains
- resets
- - fsl,mipi-phy-gpr
- ports
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qxp-mipi-csi2
+ then:
+ properties:
+ resets:
+ maxItems: 1
+ required:
+ - phys
+ else:
+ properties:
+ resets:
+ minItems: 3
+ required:
+ - fsl,mipi-phy-gpr
+
additionalProperties: false
examples:
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 09/14] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different compatible strings
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (7 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 08/14] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 10/14] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
` (4 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
From: "Guoniu.zhou" <guoniu.zhou@nxp.com>
Introduce `imx8mq_plat_data` along with enable/disable callback operations
to facilitate support for new chips. No functional changes.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- remove internal review tags
---
drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 60 ++++++++++++++++++++-------
1 file changed, 46 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
index 1f2657cf6e824..b5eae56d92f49 100644
--- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
+++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
@@ -62,6 +62,8 @@
#define CSI2RX_CFG_VID_P_FIFO_SEND_LEVEL 0x188
#define CSI2RX_CFG_DISABLE_PAYLOAD_1 0x130
+struct csi_state;
+
enum {
ST_POWERED = 1,
ST_STREAMING = 2,
@@ -83,11 +85,11 @@ static const char * const imx8mq_mipi_csi_clk_id[CSI2_NUM_CLKS] = {
#define CSI2_NUM_CLKS ARRAY_SIZE(imx8mq_mipi_csi_clk_id)
-#define GPR_CSI2_1_RX_ENABLE BIT(13)
-#define GPR_CSI2_1_VID_INTFC_ENB BIT(12)
-#define GPR_CSI2_1_HSEL BIT(10)
-#define GPR_CSI2_1_CONT_CLK_MODE BIT(8)
-#define GPR_CSI2_1_S_PRG_RXHS_SETTLE(x) (((x) & 0x3f) << 2)
+struct imx8mq_plat_data {
+ const char *name;
+ int (*enable)(struct csi_state *state, u32 hs_settle);
+ void (*disable)(struct csi_state *state);
+};
/*
* The send level configures the number of entries that must accumulate in
@@ -106,6 +108,7 @@ static const char * const imx8mq_mipi_csi_clk_id[CSI2_NUM_CLKS] = {
struct csi_state {
struct device *dev;
+ const struct imx8mq_plat_data *pdata;
void __iomem *regs;
struct clk_bulk_data clks[CSI2_NUM_CLKS];
struct reset_control *rst;
@@ -137,6 +140,35 @@ struct csi2_pix_format {
u8 width;
};
+/* -----------------------------------------------------------------------------
+ * i.MX8MQ GPR
+ */
+
+#define GPR_CSI2_1_RX_ENABLE BIT(13)
+#define GPR_CSI2_1_VID_INTFC_ENB BIT(12)
+#define GPR_CSI2_1_HSEL BIT(10)
+#define GPR_CSI2_1_CONT_CLK_MODE BIT(8)
+#define GPR_CSI2_1_S_PRG_RXHS_SETTLE(x) (((x) & 0x3f) << 2)
+
+static int imx8mq_gpr_enable(struct csi_state *state, u32 hs_settle)
+{
+ regmap_update_bits(state->phy_gpr,
+ state->phy_gpr_reg,
+ 0x3fff,
+ GPR_CSI2_1_RX_ENABLE |
+ GPR_CSI2_1_VID_INTFC_ENB |
+ GPR_CSI2_1_HSEL |
+ GPR_CSI2_1_CONT_CLK_MODE |
+ GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
+
+ return 0;
+}
+
+static const struct imx8mq_plat_data imx8mq_data = {
+ .name = "i.MX8MQ",
+ .enable = imx8mq_gpr_enable,
+};
+
static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
/* RAW (Bayer and greyscale) formats. */
{
@@ -364,14 +396,9 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
if (ret)
return ret;
- regmap_update_bits(state->phy_gpr,
- state->phy_gpr_reg,
- 0x3fff,
- GPR_CSI2_1_RX_ENABLE |
- GPR_CSI2_1_VID_INTFC_ENB |
- GPR_CSI2_1_HSEL |
- GPR_CSI2_1_CONT_CLK_MODE |
- GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
+ ret = state->pdata->enable(state, hs_settle);
+ if (ret)
+ return ret;
return 0;
}
@@ -379,6 +406,9 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
{
imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
+
+ if (state->pdata->disable)
+ state->pdata->disable(state);
}
/* -----------------------------------------------------------------------------
@@ -869,6 +899,8 @@ static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
state->dev = dev;
+ state->pdata = of_device_get_match_data(dev);
+
ret = imx8mq_mipi_csi_parse_dt(state);
if (ret < 0) {
dev_err(dev, "Failed to parse device tree: %d\n", ret);
@@ -946,7 +978,7 @@ static void imx8mq_mipi_csi_remove(struct platform_device *pdev)
}
static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
- { .compatible = "fsl,imx8mq-mipi-csi2", },
+ { .compatible = "fsl,imx8mq-mipi-csi2", .data = &imx8mq_data },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 10/14] media: imx8mq-mipi-csi2: Add support for i.MX8QXP
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (8 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 09/14] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 11/14] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
` (3 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add support for the common PHY interface to enable and disable the MIPI CSI
PHY. This is required for platforms like i.MX8QXP, which rely on the PHY
driver for powering the MIPI CSI PHY on and off.
Add reset delay for i.MX8QXP. It needs a delay after toggle reset.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- change 8QM go 8QXP, 8QM will failback to 8QXP to keep consisense with
phy drivers
---
drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 46 +++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
index b5eae56d92f49..5da9dd0f1eec6 100644
--- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
+++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -89,6 +90,8 @@ struct imx8mq_plat_data {
const char *name;
int (*enable)(struct csi_state *state, u32 hs_settle);
void (*disable)(struct csi_state *state);
+ bool use_phydrv: 1;
+ int reset_delay;
};
/*
@@ -125,6 +128,7 @@ struct csi_state {
u32 state;
struct regmap *phy_gpr;
+ struct phy *phy;
u8 phy_gpr_reg;
struct icc_path *icc_path;
@@ -169,6 +173,37 @@ static const struct imx8mq_plat_data imx8mq_data = {
.enable = imx8mq_gpr_enable,
};
+/* -----------------------------------------------------------------------------
+ * Use common PHY interface
+ */
+static int imx8_phy_enable(struct csi_state *state, u32 hs_settle)
+{
+ int ret;
+
+ ret = phy_set_speed(state->phy, hs_settle);
+ if (ret)
+ return ret;
+
+ ret = phy_power_on(state->phy);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void imx8_phy_disable(struct csi_state *state)
+{
+ phy_power_off(state->phy);
+}
+
+static const struct imx8mq_plat_data imx8qxp_data = {
+ .name = "i.MX8QXP",
+ .enable = imx8_phy_enable,
+ .disable = imx8_phy_disable,
+ .use_phydrv = 1,
+ .reset_delay = 10000,
+};
+
static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
/* RAW (Bayer and greyscale) formats. */
{
@@ -273,6 +308,8 @@ static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
return ret;
}
+ fsleep(state->pdata->reset_delay);
+
return 0;
}
@@ -860,6 +897,14 @@ static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
return PTR_ERR(state->rst);
}
+ if (state->pdata->use_phydrv) {
+ state->phy = devm_of_phy_get_by_index(dev, dev->of_node, 0);
+ if (IS_ERR(state->phy))
+ return dev_err_probe(dev, PTR_ERR(state->phy), "Can't get mipi phy\n");
+
+ return 0;
+ }
+
ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
ARRAY_SIZE(out_val));
if (ret) {
@@ -979,6 +1024,7 @@ static void imx8mq_mipi_csi_remove(struct platform_device *pdev)
static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
{ .compatible = "fsl,imx8mq-mipi-csi2", .data = &imx8mq_data },
+ { .compatible = "fsl,imx8qxp-mipi-csi2", .data = &imx8qxp_data },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 11/14] arm64: dts: imx8: add capture controller for i.MX8's img subsystem
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (9 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 10/14] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 12/14] arm64: dts: imx8qm: add 24MHz clock-xtal24m Frank Li
` (2 subsequent siblings)
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add CSI related nodes (i2c, irqsteer, csi, lpcg) for i.MX8 img subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- move scu reset under scu node
- add 8qm comaptible string for mipi csi2 and mipi csi phys.
---
arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi | 391 ++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi | 53 +++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 5 +
arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi | 60 ++++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 5 +
5 files changed, 514 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index d39242c1b9f79..0ca7f7406c842 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -3,6 +3,14 @@
* Copyright 2019-2021 NXP
* Zhou Guoniu <guoniu.zhou@nxp.com>
*/
+
+img_axi_clk: clock-img-axi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ clock-output-names = "img_axi_clk";
+};
+
img_ipg_clk: clock-img-ipg {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -10,12 +18,285 @@ img_ipg_clk: clock-img-ipg {
clock-output-names = "img_ipg_clk";
};
+img_pxl_clk: clock-img-pxl {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "img_pxl_clk";
+};
+
img_subsys: bus@58000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+ isi: isi@58100000 {
+ reg = <0x58100000 0x90000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0",
+ "per1",
+ "per2",
+ "per3",
+ "per4",
+ "per5",
+ "per6",
+ "per7";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>,
+ <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>,
+ <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>,
+ <&pd IMX_SC_R_ISI_CH7>;
+ status = "disabled";
+ };
+
+ irqsteer_csi0: irqsteer@58220000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58220000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ mipi_csi_0_phy: phy@58221000 {
+ compatible = "fsl,imx8qxp-mipi-cphy";
+ reg = <0x58221000 0x1000>;
+ #phy-cells = <0>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ gpio0_mipi_csi0: gpio@58222000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58222000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi0_core_lpcg: clock-controller@58223018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58223018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi0_esc_lpcg: clock-controller@5822301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5822301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi0: i2c@58226000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58226000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_0: csi@58227000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58227000 0x1000>;
+ clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ phys = <&mipi_csi_0_phy>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_0>;
+ status = "disabled";
+ };
+
+ irqsteer_csi1: irqsteer@58240000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58240000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ mipi_csi_1_phy: phy@58241000 {
+ compatible ="fsl,imx8qxp-mipi-cphy";
+ reg = <0x58241000 0x1000>;
+ #phy-cells = <0>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ status = "disabled";
+ };
+
+ gpio0_mipi_csi1: gpio@58242000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58242000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ csi1_core_lpcg: clock-controller@58243018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58243018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi1_esc_lpcg: clock-controller@5824301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5824301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi1: i2c@58246000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58246000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_1: csi@58247000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58247000 0x1000>;
+ clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ phys = <&mipi_csi_1_phy>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_1>;
+ status = "disabled";
+ };
+
+ irqsteer_parallel: irqsteer@58260000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58260000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_dummy>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_PI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ pi0_ipg_lpcg: clock-controller@58263004 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263004 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "pi0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_pxl_lpcg: clock-controller@58263018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263018 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_misc_lpcg: clock-controller@5826301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5826301c 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_misc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c0_parallel: i2c@58266000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58266000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_parallel>;
+ power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+ status = "disabled";
+ };
+
jpegdec: jpegdec@58400000 {
reg = <0x58400000 0x00050000>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
@@ -40,6 +321,116 @@ jpegenc: jpegenc@58450000 {
<&pd IMX_SC_R_MJPEG_ENC_S0>;
};
+ pdma0_lpcg: clock-controller@58500000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58500000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma0_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pdma1_lpcg: clock-controller@58510000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58510000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma1_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH1>;
+ };
+
+ pdma2_lpcg: clock-controller@58520000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58520000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma2_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH2>;
+ };
+
+ pdma3_lpcg: clock-controller@58530000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58530000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma3_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH3>;
+ };
+
+ pdma4_lpcg: clock-controller@58540000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58540000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma4_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH4>;
+ };
+
+ pdma5_lpcg: clock-controller@58550000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58550000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma5_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH5>;
+ };
+
+ pdma6_lpcg: clock-controller@58560000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58560000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma6_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH6>;
+ };
+
+ pdma7_lpcg: clock-controller@58570000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58570000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma7_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH7>;
+ };
+
+ csi0_pxl_lpcg: clock-controller@58580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58580000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi1_pxl_lpcg: clock-controller@58590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58590000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi1_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x585a0000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+ power-domains = <&pd IMX_SC_R_HDMI_RX>;
+ };
+
img_jpeg_dec_lpcg: clock-controller@585d0000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x585d0000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 2bbdacb1313f9..946055ec25424 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -3,6 +3,31 @@
* Copyright 2021 NXP
*/
+&isi {
+ compatible = "fsl,imx8qm-isi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
};
@@ -10,3 +35,31 @@ &jpegdec {
&jpegenc {
compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_0 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+};
+
+&mipi_csi_0_phy {
+ compatible = "fsl,imx8qm-mipi-cphy", "fsl,imx8qxp-mipi-cphy";
+};
+
+&mipi_csi_1 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+};
+
+&mipi_csi_1_phy {
+ compatible = "fsl,imx8qm-mipi-cphy", "fsl,imx8qxp-mipi-cphy";
+};
+
+&pi0_ipg_lpcg {
+ status = "disabled";
+};
+
+&pi0_misc_lpcg {
+ status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 6fa31bc9ece8f..c6a17a0d739c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -333,6 +333,11 @@ iomuxc: pinctrl {
compatible = "fsl,imx8qm-iomuxc";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 3a087317591d8..4c15e4569a51a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -4,6 +4,62 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
+&csi1_pxl_lpcg {
+ status = "disabled";
+};
+
+&csi1_core_lpcg {
+ status = "disabled";
+};
+
+&csi1_esc_lpcg {
+ status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+ status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+ status = "disabled";
+};
+
+&irqsteer_csi1 {
+ status = "disabled";
+};
+
+&isi {
+ compatible = "fsl,imx8qxp-isi";
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>, <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>, <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per4", "per5", "per6", "per7";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qxp-jpgdec";
};
@@ -11,3 +67,7 @@ &jpegdec {
&jpegenc {
compatible = "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_1 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 05138326f0a57..c078d92f76c0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -241,6 +241,11 @@ scu_key: keys {
status = "disabled";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 12/14] arm64: dts: imx8qm: add 24MHz clock-xtal24m
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (10 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 11/14] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 13/14] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-02-05 17:18 ` [PATCH v2 14/14] arm64: dts: imx8q: add camera ov5640 support " Frank Li
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add fixed clock node clock-xtal24m to prepare to add camera support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index c6a17a0d739c5..40cd45cd9f88f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -590,6 +590,13 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
clock-output-names = "mipi_pll_div2_clk";
};
+ xtal24m: clock-xtal24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal_24MHz";
+ };
+
vpu_subsys_dsp: bus@55000000 {
compatible = "simple-bus";
#address-cells = <1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 13/14] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (11 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 12/14] arm64: dts: imx8qm: add 24MHz clock-xtal24m Frank Li
@ 2025-02-05 17:18 ` Frank Li
2025-02-05 17:18 ` [PATCH v2 14/14] arm64: dts: imx8q: add camera ov5640 support " Frank Li
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add linux,cma node because some devices, such as camera, need big continue
physical memory.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 8 ++++++++
2 files changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 50fd3370f7dce..61ef00f4259e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -113,6 +113,15 @@ dsp_vdev0buffer: memory@94300000 {
reg = <0 0x94300000 0 0x100000>;
no-map;
};
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ reusable;
+ };
};
lvds_backlight0: backlight-lvds0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index be79c793213a5..89c6516c5ba90 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -56,6 +56,14 @@ dsp_vdev0buffer: memory@94300000 {
reg = <0 0x94300000 0 0x100000>;
no-map;
};
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ reusable;
+ };
};
reg_usdhc2_vmmc: usdhc2-vmmc {
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 14/14] arm64: dts: imx8q: add camera ov5640 support for imx8qm-mek and imx8qxp-mek
2025-02-05 17:18 [PATCH v2 00/14] media: imx8: add camera support Frank Li
` (12 preceding siblings ...)
2025-02-05 17:18 ` [PATCH v2 13/14] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
@ 2025-02-05 17:18 ` Frank Li
13 siblings, 0 replies; 20+ messages in thread
From: Frank Li @ 2025-02-05 17:18 UTC (permalink / raw)
To: Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Laurent Pinchart, Mauro Carvalho Chehab, Rui Miguel Silva,
Martin Kepplinger, Purism Kernel Team
Cc: linux-phy, devicetree, imx, linux-arm-kernel, linux-kernel,
linux-media, Guoniu.zhou, Robby Cai, Robert Chiras, Frank Li
Add ov5640 overlay file for imx8qm-mek and imx8qxp-mek board. Camera can
connect different CSI port. So use dts overlay file to handle these
difference connect options.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
arch/arm64/boot/dts/freescale/Makefile | 12 +++
.../boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso | 93 ++++++++++++++++++++++
.../boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso | 93 ++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 51 ++++++++++++
.../boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso | 92 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 36 +++++++++
6 files changed, 377 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 839432153cc7a..d1cbc08eb3f4d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -261,12 +261,24 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+
+imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb
+imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb
+imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
new file mode 100644
index 0000000000000..c2bc5b839e3f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi_0: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi0>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+ status = "okay";
+
+ port {
+ ov5640_mipi_0_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi0_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi0 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi0_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_0_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
new file mode 100644
index 0000000000000..78cc0575fb005
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi_1: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi1>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+ status = "okay";
+
+ port {
+ ov5640_mipi_1_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi1_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi1 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@3 {
+ reg = <3>;
+
+ isi_in_3: endpoint {
+ remote-endpoint = <&mipi_csi1_out>;
+ };
+ };
+ };
+};
+
+&mipi_csi_1 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi1_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi1_out: endpoint {
+ remote-endpoint = <&isi_in_3>;
+ };
+ };
+ };
+};
+
+&mipi_csi_1_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 61ef00f4259e1..3a6e25e08c26a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -155,6 +155,27 @@ usb3_data_ss: endpoint {
};
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_2v8: regulator-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
@@ -727,6 +748,20 @@ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
>;
};
+ pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020
+ IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020
+ >;
+ };
+
+ pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL 0xc2000020
+ IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA 0xc2000020
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021
@@ -905,6 +940,22 @@ IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c
>;
};
+ pinctrl_mipi_csi0: mipi-csi0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27 0xC0000041
+ IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0xC0000041
+ IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
+ pinctrl_mipi_csi1: mipi-csi1grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0xC0000041
+ IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31 0xC0000041
+ IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
pinctrl_pciea: pcieagrp {
fsl,pins = <
IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 0x04000021
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
new file mode 100644
index 0000000000000..6d86b1f549d93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi0>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+ status = "okay";
+
+ port {
+ ov5640_mipi_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi0_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi0 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi0_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 89c6516c5ba90..a356c491375cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -90,6 +90,27 @@ usb3_data_ss: endpoint {
};
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_2v8: regulator-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
reg_pcieb: regulator-pcie {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
@@ -749,6 +770,13 @@ IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21
>;
};
+ pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+ fsl,pins = <
+ IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020
+ IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020
+ >;
+ };
+
pinctrl_ioexp_rst: ioexprstgrp {
fsl,pins = <
IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021
@@ -789,6 +817,14 @@ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
>;
};
+ pinctrl_mipi_csi0: mipi-csi0grp {
+ fsl,pins = <
+ IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 0xC0000041
+ IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 0xC0000041
+ IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
pinctrl_pcieb: pcieagrp {
fsl,pins = <
IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000021
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread