From: Stuart Yoder <stuart.yoder@arm.com>
To: linux-integrity@vger.kernel.org, jarkko@kernel.org,
peterhuewe@gmx.de, jgg@ziepe.ca, sudeep.holla@arm.com,
rafael@kernel.org, lenb@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 0/5] Add support for the TPM FF-A start method
Date: Mon, 17 Feb 2025 16:49:41 -0600 [thread overview]
Message-ID: <20250217224946.113951-1-stuart.yoder@arm.com> (raw)
Firmware Framework for Arm A-profile (FF-A) is a messaging framework
for Arm-based systems, and in the context of the TPM CRB driver is used
to signal 'start' to a CRB-based TPM service which is hosted in an
FF-A secure partition running in TrustZone.
These patches add support for the CRB FF-A start method defined
in the TCG ACPI specification v1.4 and the FF-A ABI defined
in the Arm TPM Service CRB over FF-A (DEN0138) specification:
https://developer.arm.com/documentation/den0138/latest/
The first patch adds an FF-A driver to handle the FF-A messaging when
communicating with a CRB-based TPM secure partition built on FF-A.
The driver is probed when the TPM secure partition is discovered by
the Linux FF-A infrastructure.
The second patch consolidates the check for idle support in the CRB
driver to one place.
The third patch defines the new ACPI start method enumeration for
CRB over FF-A.
The fourth patch adds support for the FF-A ACPI start method to
the TPM crb driver.
The fifth patch adds documentation explaining how the CRB driver
and FF-A relate.
Version 4
-fix warning from kernel test robot in patch 1
-fix warnings from checkpatch.pl --strict
-clean up unecessary parenthesis usage
-update variable declaration to be reverse tree order
-document exported functions in tpm_crb_ffa driver
-remove unnecessary author and maintainer info in tpm_crb_ffa driver
-fix declaration of variables to be in reverse tree order
Version 3
-changed prefixes used throughout patch series to tpm_crb_ffa*
Version 2
-updates to cover letter to define FF-A
-added new patch with documentation
-created pull request in ACPIA and added link to the patch
updating actbl3.h
-added tpm_ prefix to the FF-A CRB driver
Stuart Yoder (5):
tpm_crb: implement driver compliant to CRB over FF-A
tpm_crb: clean-up and refactor check for idle support
ACPICA: add start method for Arm FF-A
tpm_crb: add support for the Arm FF-A start method
Documentation: tpm: add documentation for the CRB FF-A interface
Documentation/security/tpm/tpm_ffa_crb.rst | 65 ++++
drivers/char/tpm/Kconfig | 9 +
drivers/char/tpm/Makefile | 1 +
drivers/char/tpm/tpm_crb.c | 105 +++++--
drivers/char/tpm/tpm_crb_ffa.c | 348 +++++++++++++++++++++
drivers/char/tpm/tpm_crb_ffa.h | 25 ++
include/acpi/actbl3.h | 1 +
7 files changed, 535 insertions(+), 19 deletions(-)
create mode 100644 Documentation/security/tpm/tpm_ffa_crb.rst
create mode 100644 drivers/char/tpm/tpm_crb_ffa.c
create mode 100644 drivers/char/tpm/tpm_crb_ffa.h
--
2.34.1
next reply other threads:[~2025-02-17 22:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 22:49 Stuart Yoder [this message]
2025-02-17 22:49 ` [PATCH v4 1/5] tpm_crb: implement driver compliant to CRB over FF-A Stuart Yoder
2025-02-18 15:07 ` Jarkko Sakkinen
2025-02-17 22:49 ` [PATCH v4 2/5] tpm_crb: clean-up and refactor check for idle support Stuart Yoder
2025-02-18 15:52 ` Jarkko Sakkinen
2025-02-17 22:49 ` [PATCH v4 3/5] ACPICA: add start method for Arm FF-A Stuart Yoder
2025-02-18 15:53 ` Jarkko Sakkinen
2025-02-17 22:49 ` [PATCH v4 4/5] tpm_crb: add support for the Arm FF-A start method Stuart Yoder
2025-02-18 15:54 ` Jarkko Sakkinen
2025-02-17 22:49 ` [PATCH v4 5/5] Documentation: tpm: add documentation for the CRB FF-A interface Stuart Yoder
2025-03-02 19:33 ` [PATCH v4 0/5] Add support for the TPM FF-A start method Jarkko Sakkinen
2025-03-03 16:55 ` Jason Gunthorpe
2025-03-04 16:02 ` Jarkko Sakkinen
2025-03-05 16:09 ` Stuart Yoder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217224946.113951-1-stuart.yoder@arm.com \
--to=stuart.yoder@arm.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=rafael@kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox