The Linux Kernel Mailing List
 help / color / mirror / Atom feed
* [PATCH v5 0/2] Add Radxa Rock 4D support
@ 2025-02-18 16:04 Detlev Casanova
  2025-02-18 16:04 ` [PATCH v5 1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board Detlev Casanova
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Detlev Casanova @ 2025-02-18 16:04 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiko Stuebner,
	Jonas Karlman, Chris Morgan, Kever Yang, Dragan Simic, Tim Lunn,
	Michael Riesch, FUKAUMI Naoki, Detlev Casanova, Alexey Charkov,
	Stephen Chen, Elon Zhang, devicetree, linux-arm-kernel,
	linux-rockchip, kernel

Add the basic support for the board. (Not officially released yet)
It is based on the Rockchip rk3576 SoC, so I haven't added the
following devices yet:
 - VOP/HDMI
 - UFS
as the support for those has not been merged yet, but are close to be
and I already validated that they work.
It will come with another patch set.

The following devices are supported and working:
 - UART
 - SD Card
 - Ethernet
 - USB
 - RTC

Changes since v4:
 - Add the correct pinctrls when needed
 - Move #clock- and #gpio- props to their corresponding props
 - Add mmc0 alias
 - Rename gpio to gpios
 - Remove unnecessary blank lines

Changes since v3:
 - Reorder nodes alphabetically
 - Add missing cpu supply

Changes since v2:
 - Move and rename snps,reset-* props to the PHY node
 - Rename phy@1 to phy-ethernet@1

Changes since v1:
 - Add missing dt bindings
 - Remove clock-frequency in rtc node
 - Add line break in pmic pinctrls

Detlev Casanova (1):
  dt-bindings: arm: rockchip: Add Radxa ROCK 4D board

Stephen Chen (1):
  arm64: dts: rockchip: Add Radxa ROCK 4D device tree

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3576-rock-4d.dts      | 689 ++++++++++++++++++
 3 files changed, 695 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts

-- 
2.48.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v5 1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board
  2025-02-18 16:04 [PATCH v5 0/2] Add Radxa Rock 4D support Detlev Casanova
@ 2025-02-18 16:04 ` Detlev Casanova
  2025-02-18 16:04 ` [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ROCK 4D device tree Detlev Casanova
  2025-02-22 23:48 ` [PATCH v5 0/2] Add Radxa Rock 4D support Heiko Stuebner
  2 siblings, 0 replies; 4+ messages in thread
From: Detlev Casanova @ 2025-02-18 16:04 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiko Stuebner,
	Jonas Karlman, Chris Morgan, Kever Yang, Dragan Simic, Tim Lunn,
	Michael Riesch, FUKAUMI Naoki, Detlev Casanova, Alexey Charkov,
	Stephen Chen, Elon Zhang, devicetree, linux-arm-kernel,
	linux-rockchip, kernel, Krzysztof Kozlowski

The board is based on the Rockchip rk3576 SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 522a6f0450eae..9ddb20890627f 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -862,6 +862,11 @@ properties:
           - const: radxa,rock-4c-plus
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4D
+        items:
+          - const: radxa,rock-4d
+          - const: rockchip,rk3576
+
       - description: Radxa ROCK 4SE
         items:
           - const: radxa,rock-4se
-- 
2.48.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ROCK 4D device tree
  2025-02-18 16:04 [PATCH v5 0/2] Add Radxa Rock 4D support Detlev Casanova
  2025-02-18 16:04 ` [PATCH v5 1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board Detlev Casanova
@ 2025-02-18 16:04 ` Detlev Casanova
  2025-02-22 23:48 ` [PATCH v5 0/2] Add Radxa Rock 4D support Heiko Stuebner
  2 siblings, 0 replies; 4+ messages in thread
From: Detlev Casanova @ 2025-02-18 16:04 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiko Stuebner,
	Jonas Karlman, Chris Morgan, Kever Yang, Dragan Simic, Tim Lunn,
	Michael Riesch, FUKAUMI Naoki, Detlev Casanova, Alexey Charkov,
	Stephen Chen, Elon Zhang, devicetree, linux-arm-kernel,
	linux-rockchip, kernel

From: Stephen Chen <stephen@radxa.com>

The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC.

The device tree adds support for basic devices:
 - UART
 - SD Card
 - Ethernet
 - USB
 - RTC

It has 4 USB ports but only 3 are usable as the top left one is used
for maskrom.

It has a USB-C port that is only used for powering the board.

Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3576-rock-4d.dts      | 689 ++++++++++++++++++
 2 files changed, 690 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index def1222c1907e..a112aeb37948a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
new file mode 100644
index 0000000000000..5dc1c18a3b211
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Radxa ROCK 4D";
+	compatible = "radxa,rock-4d", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_g &led_rgb_r>;
+
+		power-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		user-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc_12v0_dcin";
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-name = "vcc_1v2_ufs_vccq_s0";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1v8_s0";
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1v8_ufs_vccq2_s0";
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_pcie";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_rtc_s5";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_ufs_s0";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_device";
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_5v0_host: regulator-vcc-5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc_5v0_device>;
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_sys";
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus
+		     &ethm0_clk0_25m_out>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins
+			     &rk806_dvs1_null
+			     &rk806_dvs2_null
+			     &rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_rgb_g: led-green-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_rgb_r: led-red-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren: pcie-pwren {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
-- 
2.48.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v5 0/2] Add Radxa Rock 4D support
  2025-02-18 16:04 [PATCH v5 0/2] Add Radxa Rock 4D support Detlev Casanova
  2025-02-18 16:04 ` [PATCH v5 1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board Detlev Casanova
  2025-02-18 16:04 ` [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ROCK 4D device tree Detlev Casanova
@ 2025-02-22 23:48 ` Heiko Stuebner
  2 siblings, 0 replies; 4+ messages in thread
From: Heiko Stuebner @ 2025-02-22 23:48 UTC (permalink / raw)
  To: linux-kernel, Detlev Casanova
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Jonas Karlman, Chris Morgan, Kever Yang, Dragan Simic, Tim Lunn,
	Michael Riesch, FUKAUMI Naoki, Alexey Charkov, Stephen Chen,
	Elon Zhang, devicetree, linux-arm-kernel, linux-rockchip, kernel


On Tue, 18 Feb 2025 11:04:17 -0500, Detlev Casanova wrote:
> Add the basic support for the board. (Not officially released yet)
> It is based on the Rockchip rk3576 SoC, so I haven't added the
> following devices yet:
>  - VOP/HDMI
>  - UFS
> as the support for those has not been merged yet, but are close to be
> and I already validated that they work.
> It will come with another patch set.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board
[2/2] arm64: dts: rockchip: Add Radxa ROCK 4D device tree

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2025-02-22 23:48 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-02-18 16:04 [PATCH v5 0/2] Add Radxa Rock 4D support Detlev Casanova
2025-02-18 16:04 ` [PATCH v5 1/2] dt-bindings: arm: rockchip: Add Radxa ROCK 4D board Detlev Casanova
2025-02-18 16:04 ` [PATCH v5 2/2] arm64: dts: rockchip: Add Radxa ROCK 4D device tree Detlev Casanova
2025-02-22 23:48 ` [PATCH v5 0/2] Add Radxa Rock 4D support Heiko Stuebner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox