From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Simon Horman" <horms@kernel.org>,
"Romain Gantois" <romain.gantois@bootlin.com>
Subject: [PATCH net-next v3 06/13] net: phy: phy_caps: Implement link_capabilities lookup by linkmode
Date: Fri, 28 Feb 2025 15:55:31 +0100 [thread overview]
Message-ID: <20250228145540.2209551-7-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20250228145540.2209551-1-maxime.chevallier@bootlin.com>
In several occasions, phylib needs to lookup a set of matching speed and
duplex against a given linkmode set. Instead of relying on the
phy_settings array and thus iterate over the whole linkmodes list, use
the link_capabilities array to lookup these matches, as we aren't
interested in the actual link setting that matches but rather the speed
and duplex for that setting.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/phy/phy-caps.h | 5 +++++
drivers/net/phy/phy-core.c | 36 +++++++++++++-----------------
drivers/net/phy/phy_caps.c | 45 ++++++++++++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 21 deletions(-)
diff --git a/drivers/net/phy/phy-caps.h b/drivers/net/phy/phy-caps.h
index 7359983fce0f..7b95a9cb5ebb 100644
--- a/drivers/net/phy/phy-caps.h
+++ b/drivers/net/phy/phy-caps.h
@@ -46,5 +46,10 @@ size_t phy_caps_speeds(unsigned int *speeds, size_t size,
void phy_caps_linkmode_max_speed(u32 max_speed, unsigned long *linkmodes);
bool phy_caps_valid(int speed, int duplex, const unsigned long *linkmodes);
+const struct link_capabilities *
+phy_caps_lookup_by_linkmode(const unsigned long *linkmodes);
+
+const struct link_capabilities *
+phy_caps_lookup_by_linkmode_rev(const unsigned long *linkmodes, bool fdx_only);
#endif /* __PHY_CAPS_H */
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index f62bc1be67b2..6cb8f857a7f1 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -468,16 +468,15 @@ EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
void phy_resolve_aneg_linkmode(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
- int i;
+ const struct link_capabilities *c;
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
- for (i = 0; i < ARRAY_SIZE(settings); i++)
- if (test_bit(settings[i].bit, common)) {
- phydev->speed = settings[i].speed;
- phydev->duplex = settings[i].duplex;
- break;
- }
+ c = phy_caps_lookup_by_linkmode(common);
+ if (c) {
+ phydev->speed = c->speed;
+ phydev->duplex = c->duplex;
+ }
phy_resolve_aneg_pause(phydev);
}
@@ -495,7 +494,8 @@ EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
void phy_check_downshift(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
- int i, speed = SPEED_UNKNOWN;
+ const struct link_capabilities *c;
+ int speed = SPEED_UNKNOWN;
phydev->downshifted_rate = 0;
@@ -505,11 +505,9 @@ void phy_check_downshift(struct phy_device *phydev)
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
- for (i = 0; i < ARRAY_SIZE(settings); i++)
- if (test_bit(settings[i].bit, common)) {
- speed = settings[i].speed;
- break;
- }
+ c = phy_caps_lookup_by_linkmode(common);
+ if (c)
+ speed = c->speed;
if (speed == SPEED_UNKNOWN || phydev->speed >= speed)
return;
@@ -523,17 +521,13 @@ void phy_check_downshift(struct phy_device *phydev)
static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
- int i = ARRAY_SIZE(settings);
+ const struct link_capabilities *c;
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
- while (--i >= 0) {
- if (test_bit(settings[i].bit, common)) {
- if (fdx_only && settings[i].duplex != DUPLEX_FULL)
- continue;
- return settings[i].speed;
- }
- }
+ c = phy_caps_lookup_by_linkmode_rev(common, fdx_only);
+ if (c)
+ return c->speed;
return SPEED_UNKNOWN;
}
diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
index b776375ea9e4..8cf7ff3f1368 100644
--- a/drivers/net/phy/phy_caps.c
+++ b/drivers/net/phy/phy_caps.c
@@ -104,6 +104,51 @@ size_t phy_caps_speeds(unsigned int *speeds, size_t size,
return count;
}
+/**
+ * phy_caps_lookup_by_linkmode() - Lookup the fastest matching link_capabilities
+ * @linkmodes: Linkmodes to match against
+ *
+ * Returns: The highest-speed link_capabilities that intersects the given
+ * linkmodes. In case several DUPLEX_ options exist at that speed,
+ * DUPLEX_FULL is matched first. NULL is returned if no match.
+ */
+const struct link_capabilities *
+phy_caps_lookup_by_linkmode(const unsigned long *linkmodes)
+{
+ int capa;
+
+ for (capa = __LINK_CAPA_LAST; capa >= 0; capa--)
+ if (linkmode_intersects(link_caps[capa].linkmodes, linkmodes))
+ return &link_caps[capa];
+
+ return NULL;
+}
+
+/**
+ * phy_caps_lookup_by_linkmode_rev() - Lookup the slowest matching link_capabilities
+ * @linkmodes: Linkmodes to match against
+ * @fdx_only: Full duplex match only when set
+ *
+ * Returns: The lowest-speed link_capabilities that intersects the given
+ * linkmodes. When set, fdx_only will ignore half-duplex matches.
+ * NULL is returned if no match.
+ */
+const struct link_capabilities *
+phy_caps_lookup_by_linkmode_rev(const unsigned long *linkmodes, bool fdx_only)
+{
+ int capa;
+
+ for (capa = 0; capa < __LINK_CAPA_MAX; capa++) {
+ if (fdx_only && link_caps[capa].duplex != DUPLEX_FULL)
+ continue;
+
+ if (linkmode_intersects(link_caps[capa].linkmodes, linkmodes))
+ return &link_caps[capa];
+ }
+
+ return NULL;
+}
+
/**
* phy_caps_linkmode_max_speed() - Clamp a linkmodes set to a max speed
* @max_speed: Speed limit for the linkmode set
--
2.48.1
next prev parent reply other threads:[~2025-02-28 14:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-28 14:55 [PATCH net-next v3 00/13] net: phy: Rework linkmodes handling in a dedicated file Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 01/13] net: ethtool: Export the link_mode_params definitions Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 02/13] net: phy: Use an internal, searchable storage for the linkmodes Maxime Chevallier
2025-02-28 15:41 ` Russell King (Oracle)
2025-02-28 15:55 ` Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 03/13] net: phy: phy_caps: Move phy_speeds to phy_caps Maxime Chevallier
2025-02-28 16:10 ` Russell King (Oracle)
2025-02-28 16:17 ` Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 04/13] net: phy: phy_caps: Move __set_linkmode_max_speed " Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 05/13] net: phy: phy_caps: Introduce phy_caps_valid Maxime Chevallier
2025-02-28 14:55 ` Maxime Chevallier [this message]
2025-02-28 14:55 ` [PATCH net-next v3 07/13] net: phy: phy_caps: Allow looking-up link caps based on speed and duplex Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 08/13] net: phy: phy_device: Use link_capabilities lookup for PHY aneg config Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 09/13] net: phylink: Use phy_caps_lookup for fixed-link configuration Maxime Chevallier
2025-02-28 16:20 ` Russell King (Oracle)
2025-02-28 16:49 ` Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 10/13] net: phy: drop phy_settings and the associated lookup helpers Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 11/13] net: phylink: Add a mapping between MAC_CAPS and LINK_CAPS Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 12/13] net: phylink: Convert capabilities to linkmodes using phy_caps Maxime Chevallier
2025-02-28 14:55 ` [PATCH net-next v3 13/13] net: phy: phy_caps: Allow getting an phy_interface's capabilities Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250228145540.2209551-7-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox