[PATCH 0/3] media: rcar: Fix RAW formats

[PATCH 0/3] media: rcar: Fix RAW formats

[Tomi Valkeinen]

Fix RAW8 and RAW10 formats. These are taken from the previously sent
"[PATCH 00/18] media: rcar: Streams support" series.

I can only test these with multi-stream setup, which requires a big pile
of patches on top, so these are not really tested in upstream.

 Tomi

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
Tomi Valkeinen (3):
      media: rcar-vin: Add RCAR_GEN4 model value
      media: rcar-vin: Fix RAW8
      media: rcar-vin: Fix RAW10

 drivers/media/platform/renesas/rcar-vin/rcar-core.c |  2 +-
 drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 20 ++++++++++++++------
 drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c |  8 ++++----
 drivers/media/platform/renesas/rcar-vin/rcar-vin.h  |  1 +
 4 files changed, 20 insertions(+), 11 deletions(-)
---
base-commit: f2151613e040973c868d28c8b00885dfab69eb75
change-id: 20250324-rcar-fix-raw-c7967ff85d3e

Best regards,
-- 
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

[PATCH 1/3] media: rcar-vin: Add RCAR_GEN4 model value

[Tomi Valkeinen]

Currently Gen4 VINs are marked as RCAN_GEN3 models. Add a new enum
value, RCAR_GEN4, and use it for Gen4 VINs. No functional changes in
this patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-vin/rcar-core.c | 2 +-
 drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 8 ++++----
 drivers/media/platform/renesas/rcar-vin/rcar-vin.h  | 1 +
 3 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-core.c b/drivers/media/platform/renesas/rcar-vin/rcar-core.c
index ddfb18e6e7a4..88989c5fe636 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-core.c
@@ -1275,7 +1275,7 @@ static const struct rvin_info rcar_info_r8a77995 = {
 };
 
 static const struct rvin_info rcar_info_gen4 = {
-	.model = RCAR_GEN3,
+	.model = RCAR_GEN4,
 	.use_mc = true,
 	.use_isp = true,
 	.nv12 = true,
diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
index 8de871240440..972ae2cb3314 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
@@ -803,7 +803,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	}
 
 	/* Make sure input interface and input format is valid. */
-	if (vin->info->model == RCAR_GEN3) {
+	if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) {
 		switch (vnmc & VNMC_INF_MASK) {
 		case VNMC_INF_YUV8_BT656:
 		case VNMC_INF_YUV10_BT656:
@@ -826,7 +826,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	}
 
 	/* Enable VSYNC Field Toggle mode after one VSYNC input */
-	if (vin->info->model == RCAR_GEN3)
+	if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4)
 		dmr2 = VNDMR2_FTEV;
 	else
 		dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
@@ -926,7 +926,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		if (input_is_yuv == output_is_yuv)
 			vnmc |= VNMC_BPS;
 
-		if (vin->info->model == RCAR_GEN3) {
+		if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) {
 			/* Select between CSI-2 and parallel input */
 			if (vin->is_csi)
 				vnmc &= ~VNMC_DPINE;
@@ -1351,7 +1351,7 @@ static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd,
 
 	if (rvin_scaler_needed(vin)) {
 		/* Gen3 can't scale NV12 */
-		if (vin->info->model == RCAR_GEN3 &&
+		if ((vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) &&
 		    vin->format.pixelformat == V4L2_PIX_FMT_NV12)
 			return -EPIPE;
 
diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-vin.h b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
index f87d4bc9e53e..34bbd1343bf6 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
@@ -39,6 +39,7 @@ enum model_id {
 	RCAR_M1,
 	RCAR_GEN2,
 	RCAR_GEN3,
+	RCAR_GEN4,
 };
 
 enum rvin_csi_id {

-- 
2.43.0

Re: [PATCH 1/3] media: rcar-vin: Add RCAR_GEN4 model value

[Niklas Söderlund]

Hi Tomi,

Thanks for your work.

On 2025-03-24 13:48:52 +0200, Tomi Valkeinen wrote:
> Currently Gen4 VINs are marked as RCAN_GEN3 models. Add a new enum
> value, RCAR_GEN4, and use it for Gen4 VINs. No functional changes in
> this patch.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/renesas/rcar-vin/rcar-core.c | 2 +-
>  drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 8 ++++----
>  drivers/media/platform/renesas/rcar-vin/rcar-vin.h  | 1 +
>  3 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-core.c b/drivers/media/platform/renesas/rcar-vin/rcar-core.c
> index ddfb18e6e7a4..88989c5fe636 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-core.c
> @@ -1275,7 +1275,7 @@ static const struct rvin_info rcar_info_r8a77995 = {
>  };
>  
>  static const struct rvin_info rcar_info_gen4 = {
> -	.model = RCAR_GEN3,
> +	.model = RCAR_GEN4,
>  	.use_mc = true,
>  	.use_isp = true,
>  	.nv12 = true,
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> index 8de871240440..972ae2cb3314 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> @@ -803,7 +803,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  	}
>  
>  	/* Make sure input interface and input format is valid. */
> -	if (vin->info->model == RCAR_GEN3) {
> +	if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) {
>  		switch (vnmc & VNMC_INF_MASK) {
>  		case VNMC_INF_YUV8_BT656:
>  		case VNMC_INF_YUV10_BT656:
> @@ -826,7 +826,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  	}
>  
>  	/* Enable VSYNC Field Toggle mode after one VSYNC input */
> -	if (vin->info->model == RCAR_GEN3)
> +	if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4)
>  		dmr2 = VNDMR2_FTEV;
>  	else
>  		dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
> @@ -926,7 +926,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  		if (input_is_yuv == output_is_yuv)
>  			vnmc |= VNMC_BPS;
>  
> -		if (vin->info->model == RCAR_GEN3) {
> +		if (vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) {
>  			/* Select between CSI-2 and parallel input */
>  			if (vin->is_csi)
>  				vnmc &= ~VNMC_DPINE;
> @@ -1351,7 +1351,7 @@ static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd,
>  
>  	if (rvin_scaler_needed(vin)) {
>  		/* Gen3 can't scale NV12 */
> -		if (vin->info->model == RCAR_GEN3 &&
> +		if ((vin->info->model == RCAR_GEN3 || vin->info->model == RCAR_GEN4) &&
>  		    vin->format.pixelformat == V4L2_PIX_FMT_NV12)
>  			return -EPIPE;
>  
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-vin.h b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
> index f87d4bc9e53e..34bbd1343bf6 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h
> @@ -39,6 +39,7 @@ enum model_id {
>  	RCAR_M1,
>  	RCAR_GEN2,
>  	RCAR_GEN3,
> +	RCAR_GEN4,
>  };
>  
>  enum rvin_csi_id {
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund

[PATCH 2/3] media: rcar-vin: Fix RAW8

[Tomi Valkeinen]

On Gen4 we need to set VNMC's EXINF to a different value (1) than in
Gen3 (0). Add a define for this, and set the bit for Gen4.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-vin/rcar-dma.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
index 972ae2cb3314..53046614f7a1 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
@@ -94,6 +94,7 @@
 #define VNMC_INF_YUV16		(5 << 16)
 #define VNMC_INF_RGB888		(6 << 16)
 #define VNMC_INF_RGB666		(7 << 16)
+#define VNMC_EXINF_RAW8		(1 << 12) /* Gen4 specific */
 #define VNMC_VUP		(1 << 10)
 #define VNMC_IM_ODD		(0 << 3)
 #define VNMC_IM_ODD_EVEN	(1 << 3)
@@ -791,6 +792,8 @@ static int rvin_setup(struct rvin_dev *vin)
 	case MEDIA_BUS_FMT_SRGGB8_1X8:
 	case MEDIA_BUS_FMT_Y8_1X8:
 		vnmc |= VNMC_INF_RAW8;
+		if (vin->info->model == RCAR_GEN4)
+			vnmc |= VNMC_EXINF_RAW8;
 		break;
 	case MEDIA_BUS_FMT_SBGGR10_1X10:
 	case MEDIA_BUS_FMT_SGBRG10_1X10:

-- 
2.43.0

Re: [PATCH 2/3] media: rcar-vin: Fix RAW8

[Niklas Söderlund]

Hi Tomi,

Thanks for your patch.

On 2025-03-24 13:48:53 +0200, Tomi Valkeinen wrote:
> On Gen4 we need to set VNMC's EXINF to a different value (1) than in
> Gen3 (0). Add a define for this, and set the bit for Gen4.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
>  drivers/media/platform/renesas/rcar-vin/rcar-dma.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> index 972ae2cb3314..53046614f7a1 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> @@ -94,6 +94,7 @@
>  #define VNMC_INF_YUV16		(5 << 16)
>  #define VNMC_INF_RGB888		(6 << 16)
>  #define VNMC_INF_RGB666		(7 << 16)
> +#define VNMC_EXINF_RAW8		(1 << 12) /* Gen4 specific */
>  #define VNMC_VUP		(1 << 10)
>  #define VNMC_IM_ODD		(0 << 3)
>  #define VNMC_IM_ODD_EVEN	(1 << 3)
> @@ -791,6 +792,8 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case MEDIA_BUS_FMT_SRGGB8_1X8:
>  	case MEDIA_BUS_FMT_Y8_1X8:
>  		vnmc |= VNMC_INF_RAW8;
> +		if (vin->info->model == RCAR_GEN4)
> +			vnmc |= VNMC_EXINF_RAW8;

This is a partial fix for RAW8, but more was needed to capture it 
correctly. But that issue covers more then just RAW8, I will send a 
proper patch to fix that. For this patch,

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

>  		break;
>  	case MEDIA_BUS_FMT_SBGGR10_1X10:
>  	case MEDIA_BUS_FMT_SGBRG10_1X10:
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund

[PATCH 3/3] media: rcar-vin: Fix RAW10

[Tomi Valkeinen]

Fix the following to get RAW10 formats working:

In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
16-bit containers, the bpp should be 2.

Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
Through Mode", used for YUV formats and should not be set for RAW10.

Fix the check related to the RGB666 format and CSI-2 mode. The
VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
This feels a bit hacky, though, and the formats should really have been
verified already earlier.

Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
 drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
index 53046614f7a1..f8394be8a922 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
@@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
 		case VNMC_INF_YUV8_BT656:
 		case VNMC_INF_YUV10_BT656:
 		case VNMC_INF_YUV16:
-		case VNMC_INF_RGB666:
 			if (vin->is_csi) {
 				vin_err(vin, "Invalid setting in MIPI CSI2\n");
 				return -EINVAL;
 			}
 			break;
+		case VNMC_INF_RGB666:
+			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
+				vin_err(vin, "Invalid setting in MIPI CSI2\n");
+				return -EINVAL;
+			}
+			break;
 		case VNMC_INF_RAW8:
 			if (!vin->is_csi) {
 				vin_err(vin, "Invalid setting in Digital Pins\n");
@@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_PIX_FMT_SGBRG10:
 	case V4L2_PIX_FMT_SGRBG10:
 	case V4L2_PIX_FMT_SRGGB10:
-		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
+		dmr = VNDMR_RMODE_RAW10;
 		break;
 	default:
 		vin_err(vin, "Invalid pixelformat (0x%x)\n",
diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
index 756fdfdbce61..65da8d513b52 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
@@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
 	},
 	{
 		.fourcc			= V4L2_PIX_FMT_SBGGR10,
-		.bpp			= 4,
+		.bpp			= 2,
 	},
 	{
 		.fourcc			= V4L2_PIX_FMT_SGBRG10,
-		.bpp			= 4,
+		.bpp			= 2,
 	},
 	{
 		.fourcc			= V4L2_PIX_FMT_SGRBG10,
-		.bpp			= 4,
+		.bpp			= 2,
 	},
 	{
 		.fourcc			= V4L2_PIX_FMT_SRGGB10,
-		.bpp			= 4,
+		.bpp			= 2,
 	},
 };
 

-- 
2.43.0

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Niklas Söderlund]

Hi Tomi,

Thanks for your work.

On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
> Fix the following to get RAW10 formats working:
> 
> In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
> 16-bit containers, the bpp should be 2.
> 
> Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
> Through Mode", used for YUV formats and should not be set for RAW10.
> 
> Fix the check related to the RGB666 format and CSI-2 mode. The
> VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
> is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
> This feels a bit hacky, though, and the formats should really have been
> verified already earlier.

I agree, it feels hacky. I would rather just remove the while switch 
then try to "fix" it by extending it more. When testing this series I 
needed a similar fix for VNMC_INF_RAW8 check below to get it to work on 
Gen4.

> 
> Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
>  drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
>  drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
>  2 files changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> index 53046614f7a1..f8394be8a922 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
>  		case VNMC_INF_YUV8_BT656:
>  		case VNMC_INF_YUV10_BT656:
>  		case VNMC_INF_YUV16:
> -		case VNMC_INF_RGB666:
>  			if (vin->is_csi) {
>  				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>  				return -EINVAL;
>  			}
>  			break;
> +		case VNMC_INF_RGB666:
> +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
> +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
> +				return -EINVAL;
> +			}
> +			break;
>  		case VNMC_INF_RAW8:
>  			if (!vin->is_csi) {
>  				vin_err(vin, "Invalid setting in Digital Pins\n");
> @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case V4L2_PIX_FMT_SGBRG10:
>  	case V4L2_PIX_FMT_SGRBG10:
>  	case V4L2_PIX_FMT_SRGGB10:
> -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
> +		dmr = VNDMR_RMODE_RAW10;
>  		break;
>  	default:
>  		vin_err(vin, "Invalid pixelformat (0x%x)\n",
> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> index 756fdfdbce61..65da8d513b52 100644
> --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
>  	},
>  	{
>  		.fourcc			= V4L2_PIX_FMT_SBGGR10,
> -		.bpp			= 4,
> +		.bpp			= 2,
>  	},
>  	{
>  		.fourcc			= V4L2_PIX_FMT_SGBRG10,
> -		.bpp			= 4,
> +		.bpp			= 2,
>  	},
>  	{
>  		.fourcc			= V4L2_PIX_FMT_SGRBG10,
> -		.bpp			= 4,
> +		.bpp			= 2,
>  	},
>  	{
>  		.fourcc			= V4L2_PIX_FMT_SRGGB10,
> -		.bpp			= 4,
> +		.bpp			= 2,
>  	},
>  };
>  
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Tomi Valkeinen]

Hi,

On 01/04/2025 00:11, Niklas Söderlund wrote:
> Hi Tomi,
> 
> Thanks for your work.
> 
> On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
>> Fix the following to get RAW10 formats working:
>>
>> In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
>> 16-bit containers, the bpp should be 2.
>>
>> Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
>> Through Mode", used for YUV formats and should not be set for RAW10.
>>
>> Fix the check related to the RGB666 format and CSI-2 mode. The
>> VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
>> is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
>> This feels a bit hacky, though, and the formats should really have been
>> verified already earlier.
> 
> I agree, it feels hacky. I would rather just remove the while switch
> then try to "fix" it by extending it more. When testing this series I
> needed a similar fix for VNMC_INF_RAW8 check below to get it to work on
> Gen4.

Why is that? What is VNMC_INF_RAW8 overlapping with?

  Tomi

>>
>> Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
>> ---
>>   drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
>>   drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
>>   2 files changed, 11 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> index 53046614f7a1..f8394be8a922 100644
>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
>>   		case VNMC_INF_YUV8_BT656:
>>   		case VNMC_INF_YUV10_BT656:
>>   		case VNMC_INF_YUV16:
>> -		case VNMC_INF_RGB666:
>>   			if (vin->is_csi) {
>>   				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>>   				return -EINVAL;
>>   			}
>>   			break;
>> +		case VNMC_INF_RGB666:
>> +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
>> +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>> +				return -EINVAL;
>> +			}
>> +			break;
>>   		case VNMC_INF_RAW8:
>>   			if (!vin->is_csi) {
>>   				vin_err(vin, "Invalid setting in Digital Pins\n");
>> @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
>>   	case V4L2_PIX_FMT_SGBRG10:
>>   	case V4L2_PIX_FMT_SGRBG10:
>>   	case V4L2_PIX_FMT_SRGGB10:
>> -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
>> +		dmr = VNDMR_RMODE_RAW10;
>>   		break;
>>   	default:
>>   		vin_err(vin, "Invalid pixelformat (0x%x)\n",
>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> index 756fdfdbce61..65da8d513b52 100644
>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SBGGR10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SGBRG10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SGRBG10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SRGGB10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   };
>>   
>>
>> -- 
>> 2.43.0
>>
> 

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Niklas Söderlund]

Hi Tomi,

On 2025-04-03 11:15:04 +0300, Tomi Valkeinen wrote:
> Hi,
> 
> On 01/04/2025 00:11, Niklas Söderlund wrote:
> > Hi Tomi,
> > 
> > Thanks for your work.
> > 
> > On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
> > > Fix the following to get RAW10 formats working:
> > > 
> > > In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
> > > 16-bit containers, the bpp should be 2.
> > > 
> > > Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
> > > Through Mode", used for YUV formats and should not be set for RAW10.
> > > 
> > > Fix the check related to the RGB666 format and CSI-2 mode. The
> > > VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
> > > is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
> > > This feels a bit hacky, though, and the formats should really have been
> > > verified already earlier.
> > 
> > I agree, it feels hacky. I would rather just remove the while switch
> > then try to "fix" it by extending it more. When testing this series I
> > needed a similar fix for VNMC_INF_RAW8 check below to get it to work on
> > Gen4.
> 
> Why is that? What is VNMC_INF_RAW8 overlapping with?

VNMC_INF_RAW8 is not overlapping the issue is the "if (!vin->is_csi)" 
check. On Gen3 RAW8 was supposedly only supported on the CSI-2 input, 
and not on the parallel bus available on some VIN instances.

On Gen4 the checks around vin->is_csi becomes skewed and as you point 
out should be cloned up. The effect at the moment however is that o Gen4 
when trying to capture RAW8 is_csi is not set (as this is a gen3 thing) 
and the "Invalid setting in Digital Pins" error path is hit.

Locally I have now removed this whole swtich, as you point out the 
formats should already be checked, and as far as I can tell they are.  
This check is a relic from early Gen3 support. And really proves after 
the Gen2 media graph clenups are done we should split rcar-dma.c -> 
rcar-dma-gen{2,3,4}.c to get rid of this mess ;-)

I would change this patch to just remove the whole switch. If you want 
to keep this fix as is I'm ok with that. I can submit a patch removing 
the switch if you like on top.

> 
>  Tomi
> 
> > > 
> > > Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
> > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> > > ---
> > >   drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
> > >   drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
> > >   2 files changed, 11 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > index 53046614f7a1..f8394be8a922 100644
> > > --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
> > >   		case VNMC_INF_YUV8_BT656:
> > >   		case VNMC_INF_YUV10_BT656:
> > >   		case VNMC_INF_YUV16:
> > > -		case VNMC_INF_RGB666:
> > >   			if (vin->is_csi) {
> > >   				vin_err(vin, "Invalid setting in MIPI CSI2\n");
> > >   				return -EINVAL;
> > >   			}
> > >   			break;
> > > +		case VNMC_INF_RGB666:
> > > +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
> > > +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
> > > +				return -EINVAL;
> > > +			}
> > > +			break;
> > >   		case VNMC_INF_RAW8:
> > >   			if (!vin->is_csi) {
> > >   				vin_err(vin, "Invalid setting in Digital Pins\n");
> > > @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
> > >   	case V4L2_PIX_FMT_SGBRG10:
> > >   	case V4L2_PIX_FMT_SGRBG10:
> > >   	case V4L2_PIX_FMT_SRGGB10:
> > > -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
> > > +		dmr = VNDMR_RMODE_RAW10;
> > >   		break;
> > >   	default:
> > >   		vin_err(vin, "Invalid pixelformat (0x%x)\n",
> > > diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > index 756fdfdbce61..65da8d513b52 100644
> > > --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
> > >   	},
> > >   	{
> > >   		.fourcc			= V4L2_PIX_FMT_SBGGR10,
> > > -		.bpp			= 4,
> > > +		.bpp			= 2,
> > >   	},
> > >   	{
> > >   		.fourcc			= V4L2_PIX_FMT_SGBRG10,
> > > -		.bpp			= 4,
> > > +		.bpp			= 2,
> > >   	},
> > >   	{
> > >   		.fourcc			= V4L2_PIX_FMT_SGRBG10,
> > > -		.bpp			= 4,
> > > +		.bpp			= 2,
> > >   	},
> > >   	{
> > >   		.fourcc			= V4L2_PIX_FMT_SRGGB10,
> > > -		.bpp			= 4,
> > > +		.bpp			= 2,
> > >   	},
> > >   };
> > > 
> > > -- 
> > > 2.43.0
> > > 
> > 
> 

-- 
Kind Regards,
Niklas Söderlund

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Tomi Valkeinen]

Hi,

On 03/04/2025 11:57, Niklas Söderlund wrote:
> Hi Tomi,
> 
> On 2025-04-03 11:15:04 +0300, Tomi Valkeinen wrote:
>> Hi,
>>
>> On 01/04/2025 00:11, Niklas Söderlund wrote:
>>> Hi Tomi,
>>>
>>> Thanks for your work.
>>>
>>> On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
>>>> Fix the following to get RAW10 formats working:
>>>>
>>>> In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
>>>> 16-bit containers, the bpp should be 2.
>>>>
>>>> Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
>>>> Through Mode", used for YUV formats and should not be set for RAW10.
>>>>
>>>> Fix the check related to the RGB666 format and CSI-2 mode. The
>>>> VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
>>>> is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
>>>> This feels a bit hacky, though, and the formats should really have been
>>>> verified already earlier.
>>>
>>> I agree, it feels hacky. I would rather just remove the while switch
>>> then try to "fix" it by extending it more. When testing this series I
>>> needed a similar fix for VNMC_INF_RAW8 check below to get it to work on
>>> Gen4.
>>
>> Why is that? What is VNMC_INF_RAW8 overlapping with?
> 
> VNMC_INF_RAW8 is not overlapping the issue is the "if (!vin->is_csi)"
> check. On Gen3 RAW8 was supposedly only supported on the CSI-2 input,
> and not on the parallel bus available on some VIN instances.
> 
> On Gen4 the checks around vin->is_csi becomes skewed and as you point
> out should be cloned up. The effect at the moment however is that o Gen4
> when trying to capture RAW8 is_csi is not set (as this is a gen3 thing)
> and the "Invalid setting in Digital Pins" error path is hit.

Ok. I was wondering why it worked for me. But maybe the reason it worked 
for me was the extra series from you, which also changed these checks to 
rvin_remote_is_parallel(). And perhaps that function works fine, while 
the older vin->is_csi didn't.

> Locally I have now removed this whole swtich, as you point out the
> formats should already be checked, and as far as I can tell they are.
> This check is a relic from early Gen3 support. And really proves after
> the Gen2 media graph clenups are done we should split rcar-dma.c ->
> rcar-dma-gen{2,3,4}.c to get rid of this mess ;-)
> 
> I would change this patch to just remove the whole switch. If you want
> to keep this fix as is I'm ok with that. I can submit a patch removing
> the switch if you like on top.

Ok, if you think removing the switch is fine, we can do that. I wasn't 
sure of the flow in the driver so I wasn't confident I could just drop 
it (especially considering pre-gen4, with which I have no experience). 
Thus this patch.

  Tomi

> 
>>
>>   Tomi
>>
>>>>
>>>> Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
>>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
>>>> ---
>>>>    drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
>>>>    drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
>>>>    2 files changed, 11 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>>>> index 53046614f7a1..f8394be8a922 100644
>>>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>>>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>>>> @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
>>>>    		case VNMC_INF_YUV8_BT656:
>>>>    		case VNMC_INF_YUV10_BT656:
>>>>    		case VNMC_INF_YUV16:
>>>> -		case VNMC_INF_RGB666:
>>>>    			if (vin->is_csi) {
>>>>    				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>>>>    				return -EINVAL;
>>>>    			}
>>>>    			break;
>>>> +		case VNMC_INF_RGB666:
>>>> +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
>>>> +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>>>> +				return -EINVAL;
>>>> +			}
>>>> +			break;
>>>>    		case VNMC_INF_RAW8:
>>>>    			if (!vin->is_csi) {
>>>>    				vin_err(vin, "Invalid setting in Digital Pins\n");
>>>> @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
>>>>    	case V4L2_PIX_FMT_SGBRG10:
>>>>    	case V4L2_PIX_FMT_SGRBG10:
>>>>    	case V4L2_PIX_FMT_SRGGB10:
>>>> -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
>>>> +		dmr = VNDMR_RMODE_RAW10;
>>>>    		break;
>>>>    	default:
>>>>    		vin_err(vin, "Invalid pixelformat (0x%x)\n",
>>>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>>>> index 756fdfdbce61..65da8d513b52 100644
>>>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>>>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>>>> @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
>>>>    	},
>>>>    	{
>>>>    		.fourcc			= V4L2_PIX_FMT_SBGGR10,
>>>> -		.bpp			= 4,
>>>> +		.bpp			= 2,
>>>>    	},
>>>>    	{
>>>>    		.fourcc			= V4L2_PIX_FMT_SGBRG10,
>>>> -		.bpp			= 4,
>>>> +		.bpp			= 2,
>>>>    	},
>>>>    	{
>>>>    		.fourcc			= V4L2_PIX_FMT_SGRBG10,
>>>> -		.bpp			= 4,
>>>> +		.bpp			= 2,
>>>>    	},
>>>>    	{
>>>>    		.fourcc			= V4L2_PIX_FMT_SRGGB10,
>>>> -		.bpp			= 4,
>>>> +		.bpp			= 2,
>>>>    	},
>>>>    };
>>>>
>>>> -- 
>>>> 2.43.0
>>>>
>>>
>>
> 

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Niklas Söderlund]

Hi Tomi,

On 2025-04-03 12:12:06 +0300, Tomi Valkeinen wrote:
> Hi,
> 
> On 03/04/2025 11:57, Niklas Söderlund wrote:
> > Hi Tomi,
> > 
> > On 2025-04-03 11:15:04 +0300, Tomi Valkeinen wrote:
> > > Hi,
> > > 
> > > On 01/04/2025 00:11, Niklas Söderlund wrote:
> > > > Hi Tomi,
> > > > 
> > > > Thanks for your work.
> > > > 
> > > > On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
> > > > > Fix the following to get RAW10 formats working:
> > > > > 
> > > > > In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
> > > > > 16-bit containers, the bpp should be 2.
> > > > > 
> > > > > Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
> > > > > Through Mode", used for YUV formats and should not be set for RAW10.
> > > > > 
> > > > > Fix the check related to the RGB666 format and CSI-2 mode. The
> > > > > VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
> > > > > is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
> > > > > This feels a bit hacky, though, and the formats should really have been
> > > > > verified already earlier.
> > > > 
> > > > I agree, it feels hacky. I would rather just remove the while switch
> > > > then try to "fix" it by extending it more. When testing this series I
> > > > needed a similar fix for VNMC_INF_RAW8 check below to get it to work on
> > > > Gen4.
> > > 
> > > Why is that? What is VNMC_INF_RAW8 overlapping with?
> > 
> > VNMC_INF_RAW8 is not overlapping the issue is the "if (!vin->is_csi)"
> > check. On Gen3 RAW8 was supposedly only supported on the CSI-2 input,
> > and not on the parallel bus available on some VIN instances.
> > 
> > On Gen4 the checks around vin->is_csi becomes skewed and as you point
> > out should be cloned up. The effect at the moment however is that o Gen4
> > when trying to capture RAW8 is_csi is not set (as this is a gen3 thing)
> > and the "Invalid setting in Digital Pins" error path is hit.
> 
> Ok. I was wondering why it worked for me. But maybe the reason it worked for
> me was the extra series from you, which also changed these checks to
> rvin_remote_is_parallel(). And perhaps that function works fine, while the
> older vin->is_csi didn't.

Ahh yes that might be it. There are so many VIN series floating around 
:-)

> 
> > Locally I have now removed this whole swtich, as you point out the
> > formats should already be checked, and as far as I can tell they are.
> > This check is a relic from early Gen3 support. And really proves after
> > the Gen2 media graph clenups are done we should split rcar-dma.c ->
> > rcar-dma-gen{2,3,4}.c to get rid of this mess ;-)
> > 
> > I would change this patch to just remove the whole switch. If you want
> > to keep this fix as is I'm ok with that. I can submit a patch removing
> > the switch if you like on top.
> 
> Ok, if you think removing the switch is fine, we can do that. I wasn't sure
> of the flow in the driver so I wasn't confident I could just drop it
> (especially considering pre-gen4, with which I have no experience). Thus
> this patch.
> 
>  Tomi
> 
> > 
> > > 
> > >   Tomi
> > > 
> > > > > 
> > > > > Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
> > > > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> > > > > ---
> > > > >    drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
> > > > >    drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
> > > > >    2 files changed, 11 insertions(+), 6 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > > > index 53046614f7a1..f8394be8a922 100644
> > > > > --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > > > +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
> > > > > @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
> > > > >    		case VNMC_INF_YUV8_BT656:
> > > > >    		case VNMC_INF_YUV10_BT656:
> > > > >    		case VNMC_INF_YUV16:
> > > > > -		case VNMC_INF_RGB666:
> > > > >    			if (vin->is_csi) {
> > > > >    				vin_err(vin, "Invalid setting in MIPI CSI2\n");
> > > > >    				return -EINVAL;
> > > > >    			}
> > > > >    			break;
> > > > > +		case VNMC_INF_RGB666:
> > > > > +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
> > > > > +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
> > > > > +				return -EINVAL;
> > > > > +			}
> > > > > +			break;
> > > > >    		case VNMC_INF_RAW8:
> > > > >    			if (!vin->is_csi) {
> > > > >    				vin_err(vin, "Invalid setting in Digital Pins\n");
> > > > > @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
> > > > >    	case V4L2_PIX_FMT_SGBRG10:
> > > > >    	case V4L2_PIX_FMT_SGRBG10:
> > > > >    	case V4L2_PIX_FMT_SRGGB10:
> > > > > -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
> > > > > +		dmr = VNDMR_RMODE_RAW10;
> > > > >    		break;
> > > > >    	default:
> > > > >    		vin_err(vin, "Invalid pixelformat (0x%x)\n",
> > > > > diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > > > index 756fdfdbce61..65da8d513b52 100644
> > > > > --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > > > +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
> > > > > @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
> > > > >    	},
> > > > >    	{
> > > > >    		.fourcc			= V4L2_PIX_FMT_SBGGR10,
> > > > > -		.bpp			= 4,
> > > > > +		.bpp			= 2,
> > > > >    	},
> > > > >    	{
> > > > >    		.fourcc			= V4L2_PIX_FMT_SGBRG10,
> > > > > -		.bpp			= 4,
> > > > > +		.bpp			= 2,
> > > > >    	},
> > > > >    	{
> > > > >    		.fourcc			= V4L2_PIX_FMT_SGRBG10,
> > > > > -		.bpp			= 4,
> > > > > +		.bpp			= 2,
> > > > >    	},
> > > > >    	{
> > > > >    		.fourcc			= V4L2_PIX_FMT_SRGGB10,
> > > > > -		.bpp			= 4,
> > > > > +		.bpp			= 2,
> > > > >    	},
> > > > >    };
> > > > > 
> > > > > -- 
> > > > > 2.43.0
> > > > > 
> > > > 
> > > 
> > 
> 

-- 
Kind Regards,
Niklas Söderlund

Re: [PATCH 3/3] media: rcar-vin: Fix RAW10

[Tomi Valkeinen]

Hi,

On 01/04/2025 00:11, Niklas Söderlund wrote:
> Hi Tomi,
> 
> Thanks for your work.
> 
> On 2025-03-24 13:48:54 +0200, Tomi Valkeinen wrote:
>> Fix the following to get RAW10 formats working:
>>
>> In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
>> 16-bit containers, the bpp should be 2.
>>
>> Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
>> Through Mode", used for YUV formats and should not be set for RAW10.
>>
>> Fix the check related to the RGB666 format and CSI-2 mode. The
>> VNMC_INF_RGB666 define is the same as used for RAW10 on Gen4, and RAW10
>> is allowed on CSI-2 (whereas RGB666 is not allowed on Gen3 on CSI-2).
>> This feels a bit hacky, though, and the formats should really have been
>> verified already earlier.
> 
> I agree, it feels hacky. I would rather just remove the while switch
> then try to "fix" it by extending it more. When testing this series I
> needed a similar fix for VNMC_INF_RAW8 check below to get it to work on
> Gen4.

Also, I think it's fine to be a bit hacky to have a small fix for a 
feature already in upstream, instead of doing a bigger restructuring to 
fix it.

All this should be cleaned up, but in my opinion it's better to do that 
on top of a working upstream.

  Tomi

>>
>> Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
>> ---
>>   drivers/media/platform/renesas/rcar-vin/rcar-dma.c  | 9 +++++++--
>>   drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 8 ++++----
>>   2 files changed, 11 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> index 53046614f7a1..f8394be8a922 100644
>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
>> @@ -811,12 +811,17 @@ static int rvin_setup(struct rvin_dev *vin)
>>   		case VNMC_INF_YUV8_BT656:
>>   		case VNMC_INF_YUV10_BT656:
>>   		case VNMC_INF_YUV16:
>> -		case VNMC_INF_RGB666:
>>   			if (vin->is_csi) {
>>   				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>>   				return -EINVAL;
>>   			}
>>   			break;
>> +		case VNMC_INF_RGB666:
>> +			if (vin->info->model == RCAR_GEN3 && vin->is_csi) {
>> +				vin_err(vin, "Invalid setting in MIPI CSI2\n");
>> +				return -EINVAL;
>> +			}
>> +			break;
>>   		case VNMC_INF_RAW8:
>>   			if (!vin->is_csi) {
>>   				vin_err(vin, "Invalid setting in Digital Pins\n");
>> @@ -913,7 +918,7 @@ static int rvin_setup(struct rvin_dev *vin)
>>   	case V4L2_PIX_FMT_SGBRG10:
>>   	case V4L2_PIX_FMT_SGRBG10:
>>   	case V4L2_PIX_FMT_SRGGB10:
>> -		dmr = VNDMR_RMODE_RAW10 | VNDMR_YC_THR;
>> +		dmr = VNDMR_RMODE_RAW10;
>>   		break;
>>   	default:
>>   		vin_err(vin, "Invalid pixelformat (0x%x)\n",
>> diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> index 756fdfdbce61..65da8d513b52 100644
>> --- a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c
>> @@ -88,19 +88,19 @@ static const struct rvin_video_format rvin_formats[] = {
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SBGGR10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SGBRG10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SGRBG10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_SRGGB10,
>> -		.bpp			= 4,
>> +		.bpp			= 2,
>>   	},
>>   };
>>   
>>
>> -- 
>> 2.43.0
>>
>