[PATCH v3 0/2] Add support for ADPM12160 a DC/DC Power Module

[PATCH v3 0/2] Add support for ADPM12160 a DC/DC Power Module

[Alexis Czezar Torreno]

Before adding the support for ADPM12160, this series includes a commit
to fix the issue with max34451. The family of max344** contains switched
PMBUS addresses 0x46 and 0x4A. For max34451, the version MAX34451ETNA6+
and later fixed this issue and this first commit supports this. The
MFR_REVISION is used to differentiate the different max34451 chips.

The second commit adds the actual driver for adpm12160. ASPM12160 is a
quarter brick DC/DC Power Module. It is a high power non-isolated
converter capable of delivering a fully regulated 12V, with continuous
power level of 1600W with peak power at 2400W for a limited time.
Uses PMBus Configuration.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
Changes in v3:
- Commit 1: MAX34451 Fix
   - Removed bool pmbus_addr_fixed in max34440_data
   - Reduced iout_oc_warn/fault_limit from u32 to u8
   - Used >= during revision check instead of ==
   - Moved the assignment of correct pmbus registers
- Commit 2: Add ADPM12160
   - Adjusted code to base it on the new max34440.c
- Link to v2: https://lore.kernel.org/r/20250403-dev_adpm12160-v2-0-bbf40faae988@analog.com

Changes in v2:
- Commit 1: MAX34451 Fix
-   Added a flag to denote if the device has correct pmbus address
-   Stored the pmbus address of concern inside max34440_data
-   Removed separate chip ID for max344451etna6+, detects this version
    via MFR_REVISION
-   Reverted max34440.rst to original. No edit deemed necessary
-   Supported READ_VIN, READ_IIN, and STATUS_INPUT for max34451etna6+
- Commit 2: Add ADPM12160
-   Adjusted code to base it on the new max34440.c
- Link to v1: https://lore.kernel.org/r/20250320-dev_adpm12160-v1-0-8f7b975eac75@analog.com

---
Alexis Czezar Torreno (2):
      hwmon: (pmbus/max34440): Fix support for max34451
      hwmon: (pmbus/max34440): add support adpm12160

 Documentation/hwmon/max34440.rst |  30 +++++++++---
 drivers/hwmon/pmbus/max34440.c   | 103 ++++++++++++++++++++++++++++++++++++---
 2 files changed, 118 insertions(+), 15 deletions(-)
---
base-commit: c812cc42f92d3d0b17c01b5db9a1dee5793a1491
change-id: 20250320-dev_adpm12160-5960e77a79be

Best regards,
-- 
Alexis Czezar Torreno <alexisczezar.torreno@analog.com>

[PATCH v3 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[Alexis Czezar Torreno]

The max344** family has an issue with some PMBUS address being switched.
This includes max34451 however version MAX34451-NA6 and later has this
issue fixed and this commit supports that update.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 drivers/hwmon/pmbus/max34440.c | 48 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..d6d556b0138532f0a55ffe73eae760cf41aa4ab8 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -34,16 +34,21 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	u8 iout_oc_warn_limit;
+	u8 iout_oc_fault_limit;
 };
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
@@ -60,11 +65,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_FAULT_LIMIT);
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_WARN_LIMIT);
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +138,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -235,6 +240,25 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 	 */
 
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv >= MAX34451ETNA6_MFR_REV) {
+		max34451_na6 = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;
+		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
+	}
 
 	for (page = 0; page < 16; page++) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
@@ -251,16 +275,30 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 		case 0x20:
 			data->info.func[page] = PMBUS_HAVE_VOUT |
 				PMBUS_HAVE_STATUS_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x21:
 			data->info.func[page] = PMBUS_HAVE_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN;
 			break;
 		case 0x22:
 			data->info.func[page] = PMBUS_HAVE_IOUT |
 				PMBUS_HAVE_STATUS_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x23:
 			data->info.func[page] = PMBUS_HAVE_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN;
 			break;
 		default:
 			break;
@@ -494,6 +532,8 @@ static int max34440_probe(struct i2c_client *client)
 		return -ENOMEM;
 	data->id = i2c_match_id(max34440_id, client)->driver_data;
 	data->info = max34440_info[data->id];
+	data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
+	data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;
 
 	if (data->id == max34451) {
 		rv = max34451_set_supported_funcs(client, data);

-- 
2.34.1

[PATCH v3 2/2] hwmon: (pmbus/max34440): add support adpm12160

[Alexis Czezar Torreno]

ASPM12160 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering a fully regulated 12V,
with continuous power level of 1600W with peak power at 2400W for
a limited time. Uses PMBus Configuration.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 Documentation/hwmon/max34440.rst | 30 ++++++++++++++++------
 drivers/hwmon/pmbus/max34440.c   | 55 +++++++++++++++++++++++++++++++++++++---
 2 files changed, 74 insertions(+), 11 deletions(-)

diff --git a/Documentation/hwmon/max34440.rst b/Documentation/hwmon/max34440.rst
index 162d289f08140341e8e76ab7033834ba07a8b935..8591a7152ce580a04b6965301f9bacd9b0a1a661 100644
--- a/Documentation/hwmon/max34440.rst
+++ b/Documentation/hwmon/max34440.rst
@@ -3,6 +3,14 @@ Kernel driver max34440
 
 Supported chips:
 
+  * ADI ADPM12160
+
+    Prefixes: 'adpm12160'
+
+    Addresses scanned: -
+
+    Datasheet: -
+
   * Maxim MAX34440
 
     Prefixes: 'max34440'
@@ -67,13 +75,14 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
-It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
-Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
-based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
-supports 16 voltage channels.
+This driver supports multiple devices: hardware monitoring for Maxim MAX34440
+PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply
+Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data
+Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and
+MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring
+voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12
+voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260
+also monitors both input and output of voltage and current.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -128,7 +137,10 @@ in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 ======================= =======================================================
 
-.. note:: MAX34446 only supports in[1-4].
+.. note::
+
+    - MAX34446 only supports in[1-4].
+    - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively.
 
 Curr
 ~~~~
@@ -150,6 +162,7 @@ curr[1-6]_reset_history	Write any value to reset history.
 
     - in6 and curr6 attributes only exist for MAX34440.
     - MAX34446 only supports curr[1-4].
+    - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5].
 
 Power
 ~~~~~
@@ -185,6 +198,7 @@ temp[1-8]_reset_history	Write any value to reset history.
 .. note::
    - temp7 and temp8 attributes only exist for MAX34440.
    - MAX34446 only supports temp[1-3].
+   - ADPM12160 only supports temp[1].
 
 
 .. note::
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index d6d556b0138532f0a55ffe73eae760cf41aa4ab8..3d70c454efb50ac0def27b4214e0c26d2786f349 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -14,7 +14,15 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
+enum chips {
+	adpm12160,
+	max34440,
+	max34441,
+	max34446,
+	max34451,
+	max34460,
+	max34461,
+};
 
 #define MAX34440_MFR_VOUT_PEAK		0xd4
 #define MAX34440_MFR_IOUT_PEAK		0xd5
@@ -80,7 +88,8 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 					   MAX34440_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_AVG:
-		if (data->id != max34446 && data->id != max34451)
+		if (data->id != max34446 && data->id != max34451 &&
+		    data->id != adpm12160)
 			return -ENXIO;
 		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_IOUT_AVG);
@@ -164,7 +173,8 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, page,
 					    MAX34440_MFR_IOUT_PEAK, 0);
-		if (!ret && (data->id == max34446 || data->id == max34451))
+		if (!ret && (data->id == max34446 || data->id == max34451 ||
+			     data->id == adpm12160))
 			ret = pmbus_write_word_data(client, page,
 					MAX34446_MFR_IOUT_AVG, 0);
 
@@ -309,6 +319,41 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 }
 
 static struct pmbus_driver_info max34440_info[] = {
+	[adpm12160] = {
+		.pages = 19,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_CURRENT_IN] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 0,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 0,
+		.m[PSC_CURRENT_IN] = 1,
+		.b[PSC_CURRENT_IN] = 0,
+		.R[PSC_CURRENT_IN] = 2,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 2,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		/* absent func below [18] are not for monitoring */
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[6] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[7] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[8] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[9] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT,
+		.func[10] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
 	[max34440] = {
 		.pages = 14,
 		.format[PSC_VOLTAGE_IN] = direct,
@@ -539,12 +584,16 @@ static int max34440_probe(struct i2c_client *client)
 		rv = max34451_set_supported_funcs(client, data);
 		if (rv)
 			return rv;
+	} else if (data->id == adpm12160) {
+		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
 	}
 
 	return pmbus_do_probe(client, &data->info);
 }
 
 static const struct i2c_device_id max34440_id[] = {
+	{"adpm12160", adpm12160},
 	{"max34440", max34440},
 	{"max34441", max34441},
 	{"max34446", max34446},

-- 
2.34.1

Re: [PATCH v3 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[Guenter Roeck]

On Mon, Apr 07, 2025 at 11:47:24AM +0800, Alexis Czezar Torreno wrote:
> The max344** family has an issue with some PMBUS address being switched.
> This includes max34451 however version MAX34451-NA6 and later has this
> issue fixed and this commit supports that update.
> 
> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>

Applied.

Thanks,
Guenter

Re: [PATCH v3 2/2] hwmon: (pmbus/max34440): add support adpm12160

[Guenter Roeck]

On Mon, Apr 07, 2025 at 11:47:25AM +0800, Alexis Czezar Torreno wrote:
> ASPM12160 is a quarter brick DC/DC Power Module. It is a high power
> non-isolated converter capable of delivering a fully regulated 12V,
> with continuous power level of 1600W with peak power at 2400W for
> a limited time. Uses PMBus Configuration.
> 
> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>

Applied.

Thanks,
Guenter