From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v1 5/5] ASoC: cs35l56: Read Silicon ID from DIE_STS registers for CS35L63
Date: Mon, 7 Apr 2025 16:16:44 +0100 [thread overview]
Message-ID: <20250407151842.143393-6-sbinding@opensource.cirrus.com> (raw)
In-Reply-To: <20250407151842.143393-1-sbinding@opensource.cirrus.com>
On CS35L63 the DIE_STS registers are populated by the Firmware from
OTP, so the driver can read these registers directly, rather than
obtaining them from OTP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
include/sound/cs35l56.h | 2 ++
sound/soc/codecs/cs35l56-shared.c | 39 ++++++++++++++++++++++++++++---
2 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
index e16e1a94c8a1..63f2c63f7c59 100644
--- a/include/sound/cs35l56.h
+++ b/include/sound/cs35l56.h
@@ -71,6 +71,8 @@
#define CS35L56_DSP_VIRTUAL1_MBOX_6 0x0011034
#define CS35L56_DSP_VIRTUAL1_MBOX_7 0x0011038
#define CS35L56_DSP_VIRTUAL1_MBOX_8 0x001103C
+#define CS35L56_DIE_STS1 0x0017040
+#define CS35L56_DIE_STS2 0x0017044
#define CS35L56_DSP_RESTRICT_STS1 0x00190F0
#define CS35L56_DSP1_XMEM_PACKED_0 0x2000000
#define CS35L56_DSP1_XMEM_PACKED_6143 0x2005FFC
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index 76ddb1cf6889..7f768718b69b 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -214,6 +214,8 @@ static bool cs35l56_readable_reg(struct device *dev, unsigned int reg)
case CS35L56_DSP_VIRTUAL1_MBOX_6:
case CS35L56_DSP_VIRTUAL1_MBOX_7:
case CS35L56_DSP_VIRTUAL1_MBOX_8:
+ case CS35L56_DIE_STS1:
+ case CS35L56_DIE_STS2:
case CS35L56_DSP_RESTRICT_STS1:
case CS35L56_DSP1_SYS_INFO_ID ... CS35L56_DSP1_SYS_INFO_END:
case CS35L56_DSP1_AHBM_WINDOW_DEBUG_0:
@@ -802,13 +804,29 @@ static int cs35l56_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid)
unique_id |= (u32)pte.x | ((u32)pte.y << 8) | ((u32)pte.wafer_id << 16) |
((u32)pte.dvs << 24);
- dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", unique_id);
-
*uid = unique_id;
return 0;
}
+static int cs35l63_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid)
+{
+ u32 tmp[2];
+ int ret;
+
+ ret = regmap_bulk_read(cs35l56_base->regmap, CS35L56_DIE_STS1, tmp, ARRAY_SIZE(tmp));
+ if (ret) {
+ dev_err(cs35l56_base->dev, "Cannot obtain CS35L56_DIE_STS: %d\n", ret);
+ return ret;
+ }
+
+ *uid = tmp[1];
+ *uid <<= 32;
+ *uid |= tmp[0];
+
+ return 0;
+}
+
/* Firmware calibration controls */
const struct cirrus_amp_cal_controls cs35l56_calibration_controls = {
.alg_id = 0x9f210,
@@ -829,10 +847,25 @@ int cs35l56_get_calibration(struct cs35l56_base *cs35l56_base)
if (cs35l56_base->secured)
return 0;
- ret = cs35l56_read_silicon_uid(cs35l56_base, &silicon_uid);
+ switch (cs35l56_base->type) {
+ case 0x54:
+ case 0x56:
+ case 0x57:
+ ret = cs35l56_read_silicon_uid(cs35l56_base, &silicon_uid);
+ break;
+ case 0x63:
+ ret = cs35l63_read_silicon_uid(cs35l56_base, &silicon_uid);
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+
if (ret < 0)
return ret;
+ dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", silicon_uid);
+
ret = cs_amp_get_efi_calibration_data(cs35l56_base->dev, silicon_uid,
cs35l56_base->cal_index,
&cs35l56_base->cal_data);
--
2.43.0
next prev parent reply other threads:[~2025-04-07 15:19 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 15:16 [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Stefan Binding
2025-04-07 15:16 ` [PATCH v1 1/5] ASoC: cs35l56: Add Index based on ACPI HID or SDW ID to select regmap config Stefan Binding
2025-04-28 17:32 ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 2/5] ASoC: cs35l56: Add struct to index firmware registers Stefan Binding
2025-04-07 19:16 ` Mark Brown
2025-04-08 12:58 ` Richard Fitzgerald
2025-04-08 16:00 ` Mark Brown
2025-04-09 11:33 ` Richard Fitzgerald
2025-04-09 12:31 ` Mark Brown
2025-04-28 17:34 ` Richard Fitzgerald
2025-05-05 23:46 ` Mark Brown
2025-04-07 15:16 ` [PATCH v1 3/5] ASoC: cs35l56: Add Mute, Volume and Posture registers to firmware register list Stefan Binding
2025-04-28 17:36 ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 4/5] ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire Stefan Binding
2025-04-28 17:38 ` Richard Fitzgerald
2025-04-07 15:16 ` Stefan Binding [this message]
2025-04-28 17:39 ` [PATCH v1 5/5] ASoC: cs35l56: Read Silicon ID from DIE_STS registers for CS35L63 Richard Fitzgerald
2025-05-07 11:12 ` [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250407151842.143393-6-sbinding@opensource.cirrus.com \
--to=sbinding@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox