public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: Stefan Binding <sbinding@opensource.cirrus.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.cirrus.com
Subject: Re: [PATCH v1 5/5] ASoC: cs35l56: Read Silicon ID from DIE_STS registers for CS35L63
Date: Mon, 28 Apr 2025 18:39:50 +0100	[thread overview]
Message-ID: <3a67496b-dbff-4940-b640-7dbd140e52d7@opensource.cirrus.com> (raw)
In-Reply-To: <20250407151842.143393-6-sbinding@opensource.cirrus.com>

On 7/4/25 16:16, Stefan Binding wrote:
> On CS35L63 the DIE_STS registers are populated by the Firmware from
> OTP, so the driver can read these registers directly, rather than
> obtaining them from OTP.
> 
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
>   include/sound/cs35l56.h           |  2 ++
>   sound/soc/codecs/cs35l56-shared.c | 39 ++++++++++++++++++++++++++++---
>   2 files changed, 38 insertions(+), 3 deletions(-)
> 
> diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
> index e16e1a94c8a1..63f2c63f7c59 100644
> --- a/include/sound/cs35l56.h
> +++ b/include/sound/cs35l56.h
> @@ -71,6 +71,8 @@
>   #define CS35L56_DSP_VIRTUAL1_MBOX_6			0x0011034
>   #define CS35L56_DSP_VIRTUAL1_MBOX_7			0x0011038
>   #define CS35L56_DSP_VIRTUAL1_MBOX_8			0x001103C
> +#define CS35L56_DIE_STS1				0x0017040
> +#define CS35L56_DIE_STS2				0x0017044
>   #define CS35L56_DSP_RESTRICT_STS1			0x00190F0
>   #define CS35L56_DSP1_XMEM_PACKED_0			0x2000000
>   #define CS35L56_DSP1_XMEM_PACKED_6143			0x2005FFC
> diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
> index 76ddb1cf6889..7f768718b69b 100644
> --- a/sound/soc/codecs/cs35l56-shared.c
> +++ b/sound/soc/codecs/cs35l56-shared.c
> @@ -214,6 +214,8 @@ static bool cs35l56_readable_reg(struct device *dev, unsigned int reg)
>   	case CS35L56_DSP_VIRTUAL1_MBOX_6:
>   	case CS35L56_DSP_VIRTUAL1_MBOX_7:
>   	case CS35L56_DSP_VIRTUAL1_MBOX_8:
> +	case CS35L56_DIE_STS1:
> +	case CS35L56_DIE_STS2:
>   	case CS35L56_DSP_RESTRICT_STS1:
>   	case CS35L56_DSP1_SYS_INFO_ID ... CS35L56_DSP1_SYS_INFO_END:
>   	case CS35L56_DSP1_AHBM_WINDOW_DEBUG_0:
> @@ -802,13 +804,29 @@ static int cs35l56_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid)
>   	unique_id |= (u32)pte.x | ((u32)pte.y << 8) | ((u32)pte.wafer_id << 16) |
>   		     ((u32)pte.dvs << 24);
>   
> -	dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", unique_id);
> -
>   	*uid = unique_id;
>   
>   	return 0;
>   }
>   
> +static int cs35l63_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid)
> +{
> +	u32 tmp[2];
> +	int ret;
> +
> +	ret = regmap_bulk_read(cs35l56_base->regmap, CS35L56_DIE_STS1, tmp, ARRAY_SIZE(tmp));
> +	if (ret) {
> +		dev_err(cs35l56_base->dev, "Cannot obtain CS35L56_DIE_STS: %d\n", ret);
> +		return ret;
> +	}
> +
> +	*uid = tmp[1];
> +	*uid <<= 32;
> +	*uid |= tmp[0];
> +
> +	return 0;
> +}
> +
>   /* Firmware calibration controls */
>   const struct cirrus_amp_cal_controls cs35l56_calibration_controls = {
>   	.alg_id =	0x9f210,
> @@ -829,10 +847,25 @@ int cs35l56_get_calibration(struct cs35l56_base *cs35l56_base)
>   	if (cs35l56_base->secured)
>   		return 0;
>   
> -	ret = cs35l56_read_silicon_uid(cs35l56_base, &silicon_uid);
> +	switch (cs35l56_base->type) {
> +	case 0x54:
> +	case 0x56:
> +	case 0x57:
> +		ret = cs35l56_read_silicon_uid(cs35l56_base, &silicon_uid);
> +		break;
> +	case 0x63:
> +		ret = cs35l63_read_silicon_uid(cs35l56_base, &silicon_uid);
> +		break;
> +	default:
> +		ret = -ENODEV;
> +		break;
> +	}
> +
>   	if (ret < 0)
>   		return ret;
>   
> +	dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", silicon_uid);
> +
>   	ret = cs_amp_get_efi_calibration_data(cs35l56_base->dev, silicon_uid,
>   					      cs35l56_base->cal_index,
>   					      &cs35l56_base->cal_data);
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>

  reply	other threads:[~2025-04-28 17:40 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-07 15:16 [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Stefan Binding
2025-04-07 15:16 ` [PATCH v1 1/5] ASoC: cs35l56: Add Index based on ACPI HID or SDW ID to select regmap config Stefan Binding
2025-04-28 17:32   ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 2/5] ASoC: cs35l56: Add struct to index firmware registers Stefan Binding
2025-04-07 19:16   ` Mark Brown
2025-04-08 12:58     ` Richard Fitzgerald
2025-04-08 16:00       ` Mark Brown
2025-04-09 11:33         ` Richard Fitzgerald
2025-04-09 12:31           ` Mark Brown
2025-04-28 17:34   ` Richard Fitzgerald
2025-05-05 23:46     ` Mark Brown
2025-04-07 15:16 ` [PATCH v1 3/5] ASoC: cs35l56: Add Mute, Volume and Posture registers to firmware register list Stefan Binding
2025-04-28 17:36   ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 4/5] ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire Stefan Binding
2025-04-28 17:38   ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 5/5] ASoC: cs35l56: Read Silicon ID from DIE_STS registers for CS35L63 Stefan Binding
2025-04-28 17:39   ` Richard Fitzgerald [this message]
2025-05-07 11:12 ` [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a67496b-dbff-4940-b640-7dbd140e52d7@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=sbinding@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox