Re: [PATCH 1/5] dt-bindings: mfd: add bindings for NVIDIA VRS PSEQ

[Rob Herring <robh@kernel.org>]

On Wed, Apr 16, 2025 at 12:06:15PM +0000, Shubhi Garg wrote:
> Add bindings for NVIDIA VRS (Voltage Regulator Specification) power
> sequencer device. NVIDIA VRS PSEQ controls ON/OFF and suspend/resume
> power sequencing of system power rails on Tegra234 SoC. This device
> also provides 32kHz RTC support with backup battery for system timing.
> 
> Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
> ---
>  .../bindings/mfd/nvidia,vrs-pseq.yaml         | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,vrs-pseq.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,vrs-pseq.yaml b/Documentation/devicetree/bindings/mfd/nvidia,vrs-pseq.yaml
> new file mode 100644
> index 000000000000..d4c5984930e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/nvidia,vrs-pseq.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.

First I've seen this...

According to this[1], you shouldn't have 'Copyright (c)'. But better 
check with your lawyers.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/nvidia,vrs-pseq.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Voltage Regulator Specification Power Sequencer
> +
> +maintainers:
> +  - Shubhi Garg <shgarg@nvidia.com>
> +
> +description:
> +  NVIDIA Voltage Regulator Specification Power Sequencer device controls ON/OFF

Wrap at 80 char.

> +  and suspend/resume power sequencing of system power rails for NVIDIA
> +  SoCs. It provides 32kHz RTC clock support with backup battery for
> +  system timing.

Nothing in this description indicates it's also an interrupt controller.

> +
> +properties:
> +  compatible:
> +    const: nvidia,vrs-pseq
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +    description:
> +      The first cell is the IRQ number, the second cell is the trigger type.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        vrs@3c {
> +            compatible = "nvidia,vrs-pseq";
> +            reg = <0x3c>;
> +            interrupt-parent = <&pmc>;
> +            interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +            status = "disabled";

Examples should be enabled or removed.

> +       };
> +    };
> -- 
> 2.25.1
>