[PATCH AUTOSEL 6.14 01/30] scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes

[PATCH AUTOSEL 6.14 01/30] scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes

[Sasha Levin]

From: Xingui Yang <yangxingui@huawei.com>

[ Upstream commit daff37f00c7506ca322ccfce95d342022f06ec58 ]

The hw port ID of phy may change when inserting disks in batches, causing
the port ID in hisi_sas_port and itct to be inconsistent with the hardware,
resulting in I/O errors. The solution is to set the device state to gone to
intercept I/O sent to the device, and then execute linkreset to discard and
find the disk to re-update its information.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-3-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 3596414d970b2..7a484ad0f9abe 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -935,8 +935,28 @@ static void hisi_sas_phyup_work_common(struct work_struct *work,
 		container_of(work, typeof(*phy), works[event]);
 	struct hisi_hba *hisi_hba = phy->hisi_hba;
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	struct asd_sas_port *sas_port = sas_phy->port;
+	struct hisi_sas_port *port = phy->port;
+	struct device *dev = hisi_hba->dev;
+	struct domain_device *port_dev;
 	int phy_no = sas_phy->id;
 
+	if (!test_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags) &&
+	    sas_port && port && (port->id != phy->port_id)) {
+		dev_info(dev, "phy%d's hw port id changed from %d to %llu\n",
+				phy_no, port->id, phy->port_id);
+		port_dev = sas_port->port_dev;
+		if (port_dev && !dev_is_expander(port_dev->dev_type)) {
+			/*
+			 * Set the device state to gone to block
+			 * sending IO to the device.
+			 */
+			set_bit(SAS_DEV_GONE, &port_dev->state);
+			hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
+			return;
+		}
+	}
+
 	phy->wait_phyup_cnt = 0;
 	if (phy->identify.target_port_protocols == SAS_PROTOCOL_SSP)
 		hisi_hba->hw->sl_notify_ssp(hisi_hba, phy_no);
-- 
2.39.5

[PATCH AUTOSEL 6.14 02/30] scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit 3d101165e72316775947d71321d97194f03dfef3 ]

Ensure clocks are enabled before configuring unipro. Additionally move
the pre_link() hook before the exynos_ufs_phy_init() calls. This means
the register write sequence more closely resembles the ordering of the
downstream driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-1-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufs-exynos.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 13dd5dfc03eb3..cd750786187cd 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1049,9 +1049,14 @@ static int exynos_ufs_pre_link(struct ufs_hba *hba)
 	exynos_ufs_config_intr(ufs, DFES_DEF_L4_ERRS, UNIPRO_L4);
 	exynos_ufs_set_unipro_pclk_div(ufs);
 
+	exynos_ufs_setup_clocks(hba, true, PRE_CHANGE);
+
 	/* unipro */
 	exynos_ufs_config_unipro(ufs);
 
+	if (ufs->drv_data->pre_link)
+		ufs->drv_data->pre_link(ufs);
+
 	/* m-phy */
 	exynos_ufs_phy_init(ufs);
 	if (!(ufs->opts & EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR)) {
@@ -1059,11 +1064,6 @@ static int exynos_ufs_pre_link(struct ufs_hba *hba)
 		exynos_ufs_config_phy_cap_attr(ufs);
 	}
 
-	exynos_ufs_setup_clocks(hba, true, PRE_CHANGE);
-
-	if (ufs->drv_data->pre_link)
-		ufs->drv_data->pre_link(ufs);
-
 	return 0;
 }
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 03/30] scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit deac9ad496ec17e1ec06848964ecc635bdaca703 ]

PRDT_PREFETCH_ENABLE[31] bit should be set when desctype field of
fmpsecurity0 register is type2 (double file encryption) or type3
(support for file and disk encryption). Setting this bit enables PRDT
pre-fetching on both TXPRDT and RXPRDT.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-5-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufs-exynos.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index cd750786187cd..b441178089cdd 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -34,7 +34,7 @@
  * Exynos's Vendor specific registers for UFSHCI
  */
 #define HCI_TXPRDT_ENTRY_SIZE	0x00
-#define PRDT_PREFECT_EN		BIT(31)
+#define PRDT_PREFETCH_EN	BIT(31)
 #define HCI_RXPRDT_ENTRY_SIZE	0x04
 #define HCI_1US_TO_CNT_VAL	0x0C
 #define CNT_VAL_1US_MASK	0x3FF
@@ -1087,12 +1087,17 @@ static int exynos_ufs_post_link(struct ufs_hba *hba)
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 	struct phy *generic_phy = ufs->phy;
 	struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr;
+	u32 val = ilog2(DATA_UNIT_SIZE);
 
 	exynos_ufs_establish_connt(ufs);
 	exynos_ufs_fit_aggr_timeout(ufs);
 
 	hci_writel(ufs, 0xa, HCI_DATA_REORDER);
-	hci_writel(ufs, ilog2(DATA_UNIT_SIZE), HCI_TXPRDT_ENTRY_SIZE);
+
+	if (hba->caps & UFSHCD_CAP_CRYPTO)
+		val |= PRDT_PREFETCH_EN;
+	hci_writel(ufs, val, HCI_TXPRDT_ENTRY_SIZE);
+
 	hci_writel(ufs, ilog2(DATA_UNIT_SIZE), HCI_RXPRDT_ENTRY_SIZE);
 	hci_writel(ufs, (1 << hba->nutrs) - 1, HCI_UTRL_NEXUS_TYPE);
 	hci_writel(ufs, (1 << hba->nutmrs) - 1, HCI_UTMRL_NEXUS_TYPE);
-- 
2.39.5

[PATCH AUTOSEL 6.14 04/30] scsi: ufs: exynos: Move phy calls to .exit() callback

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit 67e4085015c33bf2fb552af1f171c58b81ef0616 ]

ufshcd_pltfrm_remove() calls ufshcd_remove(hba) which in turn calls
ufshcd_hba_exit().

By moving the phy_power_off() and phy_exit() calls to the newly created
.exit callback they get called by ufshcd_variant_hba_exit() before
ufshcd_hba_exit() turns off the regulators. This is also similar flow to
the ufs-qcom driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-6-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufs-exynos.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index b441178089cdd..e5c101480f09d 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1501,6 +1501,14 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 	return ret;
 }
 
+static void exynos_ufs_exit(struct ufs_hba *hba)
+{
+	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
+
+	phy_power_off(ufs->phy);
+	phy_exit(ufs->phy);
+}
+
 static int exynos_ufs_host_reset(struct ufs_hba *hba)
 {
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
@@ -1956,6 +1964,7 @@ static int gs101_ufs_pre_pwr_change(struct exynos_ufs *ufs,
 static const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
 	.name				= "exynos_ufs",
 	.init				= exynos_ufs_init,
+	.exit				= exynos_ufs_exit,
 	.hce_enable_notify		= exynos_ufs_hce_enable_notify,
 	.link_startup_notify		= exynos_ufs_link_startup_notify,
 	.pwr_change_notify		= exynos_ufs_pwr_change_notify,
@@ -1994,13 +2003,7 @@ static int exynos_ufs_probe(struct platform_device *pdev)
 
 static void exynos_ufs_remove(struct platform_device *pdev)
 {
-	struct ufs_hba *hba =  platform_get_drvdata(pdev);
-	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
-
 	ufshcd_pltfrm_remove(pdev);
-
-	phy_power_off(ufs->phy);
-	phy_exit(ufs->phy);
 }
 
 static struct exynos_ufs_uic_attr exynos7_uic_attr = {
-- 
2.39.5

[PATCH AUTOSEL 6.14 05/30] scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit cd4c0025069f16fc666c6ffc56c49c9b1154841f ]

GPIO_OUT[0] is connected to the reset pin of embedded UFS device.
Before powering off the phy assert the reset signal.

This is added as a gs101 specific suspend hook so as not to have any
unintended consequences for other SoCs supported by this driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-7-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufs-exynos.c | 10 ++++++++++
 drivers/ufs/host/ufs-exynos.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index e5c101480f09d..c593d6b73c4c7 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1679,6 +1679,12 @@ static void exynos_ufs_hibern8_notify(struct ufs_hba *hba,
 	}
 }
 
+static int gs101_ufs_suspend(struct exynos_ufs *ufs)
+{
+	hci_writel(ufs, 0 << 0, HCI_GPIO_OUT);
+	return 0;
+}
+
 static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 	enum ufs_notify_change_status status)
 {
@@ -1687,6 +1693,9 @@ static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 	if (status == PRE_CHANGE)
 		return 0;
 
+	if (ufs->drv_data->suspend)
+		ufs->drv_data->suspend(ufs);
+
 	if (!ufshcd_is_link_active(hba))
 		phy_power_off(ufs->phy);
 
@@ -2147,6 +2156,7 @@ static const struct exynos_ufs_drv_data gs101_ufs_drvs = {
 	.pre_link		= gs101_ufs_pre_link,
 	.post_link		= gs101_ufs_post_link,
 	.pre_pwr_change		= gs101_ufs_pre_pwr_change,
+	.suspend		= gs101_ufs_suspend,
 };
 
 static const struct of_device_id exynos_ufs_of_match[] = {
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 9670dc138d1e4..b981cfa08b596 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -191,6 +191,7 @@ struct exynos_ufs_drv_data {
 				struct ufs_pa_layer_attr *pwr);
 	int (*pre_hce_enable)(struct exynos_ufs *ufs);
 	int (*post_hce_enable)(struct exynos_ufs *ufs);
+	int (*suspend)(struct exynos_ufs *ufs);
 };
 
 struct ufs_phy_time_cfg {
-- 
2.39.5

[PATCH AUTOSEL 6.14 06/30] scsi: pm80xx: Set phy_attached to zero when device is gone

[Sasha Levin]

From: Igor Pylypiv <ipylypiv@google.com>

[ Upstream commit f7b705c238d1483f0a766e2b20010f176e5c0fb7 ]

When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 183ce00aa671e..f7067878b34f3 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -766,6 +766,7 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 			spin_lock_irqsave(&pm8001_ha->lock, flags);
 		}
 		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+		pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0;
 		pm8001_free_dev(pm8001_dev);
 	} else {
 		pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
-- 
2.39.5

[PATCH AUTOSEL 6.14 07/30] ASoC: fsl_asrc_dma: get codec or cpu dai from backend

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit ef5c23ae9ab380fa756f257411024a9b4518d1b9 ]

With audio graph card, original cpu dai is changed to codec device in
backend, so if cpu dai is dummy device in backend, get the codec dai
device, which is the real hardware device connected.

The specific case is ASRC->SAI->AMIX->CODEC.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250319033504.2898605-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_asrc_dma.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index f501f47242fb0..1bba48318e2dd 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -156,11 +156,24 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	for_each_dpcm_be(rtd, stream, dpcm) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
 		struct snd_pcm_substream *substream_be;
-		struct snd_soc_dai *dai = snd_soc_rtd_to_cpu(be, 0);
+		struct snd_soc_dai *dai_cpu = snd_soc_rtd_to_cpu(be, 0);
+		struct snd_soc_dai *dai_codec = snd_soc_rtd_to_codec(be, 0);
+		struct snd_soc_dai *dai;
 
 		if (dpcm->fe != rtd)
 			continue;
 
+		/*
+		 * With audio graph card, original cpu dai is changed to codec
+		 * device in backend, so if cpu dai is dummy device in backend,
+		 * get the codec dai device, which is the real hardware device
+		 * connected.
+		 */
+		if (!snd_soc_dai_is_dummy(dai_cpu))
+			dai = dai_cpu;
+		else
+			dai = dai_codec;
+
 		substream_be = snd_soc_dpcm_get_substream(be, stream);
 		dma_params_be = snd_soc_dai_get_dma_data(dai, substream_be);
 		dev_be = dai->dev;
-- 
2.39.5

[PATCH AUTOSEL 6.14 08/30] ASoC: codecs: Add of_match_table for aw888081 driver

[Sasha Levin]

From: Weidong Wang <wangweidong.a@awinic.com>

[ Upstream commit 6bbb2b1286f437b45ccf4828a537429153cd1096 ]

Add of_match_table for aw88081 driver to make matching
between dts and driver more flexible

Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250410024953.26565-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/aw88081.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/codecs/aw88081.c b/sound/soc/codecs/aw88081.c
index ad16ab6812cd3..3dd8428f08cce 100644
--- a/sound/soc/codecs/aw88081.c
+++ b/sound/soc/codecs/aw88081.c
@@ -1295,9 +1295,19 @@ static int aw88081_i2c_probe(struct i2c_client *i2c)
 			aw88081_dai, ARRAY_SIZE(aw88081_dai));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id aw88081_of_match[] = {
+	{ .compatible = "awinic,aw88081" },
+	{ .compatible = "awinic,aw88083" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, aw88081_of_match);
+#endif
+
 static struct i2c_driver aw88081_i2c_driver = {
 	.driver = {
 		.name = AW88081_I2C_NAME,
+		.of_match_table = of_match_ptr(aw88081_of_match),
 	},
 	.probe = aw88081_i2c_probe,
 	.id_table = aw88081_i2c_id,
-- 
2.39.5

[PATCH AUTOSEL 6.14 09/30] x86/i8253: Call clockevent_i8253_disable() with interrupts disabled

[Sasha Levin]

From: Fernando Fernandez Mancera <ffmancera@riseup.net>

[ Upstream commit 3940f5349b476197fb079c5aa19c9a988de64efb ]

There's a lockdep false positive warning related to i8253_lock:

  WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
  ...
  systemd-sleep/3324 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
  ffffffffb2c23398 (i8253_lock){+.+.}-{2:2}, at: pcspkr_event+0x3f/0xe0 [pcspkr]

  ...
  ... which became HARDIRQ-irq-unsafe at:
  ...
    lock_acquire+0xd0/0x2f0
    _raw_spin_lock+0x30/0x40
    clockevent_i8253_disable+0x1c/0x60
    pit_timer_init+0x25/0x50
    hpet_time_init+0x46/0x50
    x86_late_time_init+0x1b/0x40
    start_kernel+0x962/0xa00
    x86_64_start_reservations+0x24/0x30
    x86_64_start_kernel+0xed/0xf0
    common_startup_64+0x13e/0x141
  ...

Lockdep complains due pit_timer_init() using the lock in an IRQ-unsafe
fashion, but it's a false positive, because there is no deadlock
possible at that point due to init ordering: at the point where
pit_timer_init() is called there is no other possible usage of
i8253_lock because the system is still in the very early boot stage
with no interrupts.

But in any case, pit_timer_init() should disable interrupts before
calling clockevent_i8253_disable() out of general principle, and to
keep lockdep working even in this scenario.

Use scoped_guard() for that, as suggested by Thomas Gleixner.

[ mingo: Cleaned up the changelog. ]

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Z-uwd4Bnn7FcCShX@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/i8253.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 80e262bb627fe..cb9852ad60989 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -46,7 +46,8 @@ bool __init pit_timer_init(void)
 		 * VMMs otherwise steal CPU time just to pointlessly waggle
 		 * the (masked) IRQ.
 		 */
-		clockevent_i8253_disable();
+		scoped_guard(irq)
+			clockevent_i8253_disable();
 		return false;
 	}
 	clockevent_i8253_init(true);
-- 
2.39.5

[PATCH AUTOSEL 6.14 10/30] platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3343b086c7035222c24956780ea4423655cad6d2 ]

The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.

Both need to be handled by the x86-android-tablets code. Add 9v to
the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet
symbols to prepare for adding support for the 5V version.

All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/x86/x86-android-tablets/dmi.c    |  2 +-
 .../platform/x86/x86-android-tablets/other.c  | 64 +++++++++----------
 .../x86-android-tablets/x86-android-tablets.h |  2 +-
 3 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
index 3e5fa3b6e2fdf..e43d482b17a35 100644
--- a/drivers/platform/x86/x86-android-tablets/dmi.c
+++ b/drivers/platform/x86/x86-android-tablets/dmi.c
@@ -187,7 +187,7 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
 			/* Above strings are too generic, also match on BIOS date */
 			DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"),
 		},
-		.driver_data = (void *)&vexia_edu_atla10_info,
+		.driver_data = (void *)&vexia_edu_atla10_9v_info,
 	},
 	{
 		/* Whitelabel (sold as various brands) TM800A550L */
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index 1d93d9edb23f4..74dcac8d19d72 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -599,62 +599,62 @@ const struct x86_dev_info whitelabel_tm800a550l_info __initconst = {
 };
 
 /*
- * Vexia EDU ATLA 10 tablet, Android 4.2 / 4.4 + Guadalinex Ubuntu tablet
+ * Vexia EDU ATLA 10 tablet 9V, Android 4.2 + Guadalinex Ubuntu tablet
  * distributed to schools in the Spanish Andalucía region.
  */
 static const char * const crystal_cove_pwrsrc_psy[] = { "crystal_cove_pwrsrc" };
 
-static const struct property_entry vexia_edu_atla10_ulpmc_props[] = {
+static const struct property_entry vexia_edu_atla10_9v_ulpmc_props[] = {
 	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", crystal_cove_pwrsrc_psy),
 	{ }
 };
 
-static const struct software_node vexia_edu_atla10_ulpmc_node = {
-	.properties = vexia_edu_atla10_ulpmc_props,
+static const struct software_node vexia_edu_atla10_9v_ulpmc_node = {
+	.properties = vexia_edu_atla10_9v_ulpmc_props,
 };
 
-static const char * const vexia_edu_atla10_accel_mount_matrix[] = {
+static const char * const vexia_edu_atla10_9v_accel_mount_matrix[] = {
 	"0", "-1", "0",
 	"1", "0", "0",
 	"0", "0", "1"
 };
 
-static const struct property_entry vexia_edu_atla10_accel_props[] = {
-	PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", vexia_edu_atla10_accel_mount_matrix),
+static const struct property_entry vexia_edu_atla10_9v_accel_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", vexia_edu_atla10_9v_accel_mount_matrix),
 	{ }
 };
 
-static const struct software_node vexia_edu_atla10_accel_node = {
-	.properties = vexia_edu_atla10_accel_props,
+static const struct software_node vexia_edu_atla10_9v_accel_node = {
+	.properties = vexia_edu_atla10_9v_accel_props,
 };
 
-static const struct property_entry vexia_edu_atla10_touchscreen_props[] = {
+static const struct property_entry vexia_edu_atla10_9v_touchscreen_props[] = {
 	PROPERTY_ENTRY_U32("hid-descr-addr", 0x0000),
 	PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 120),
 	{ }
 };
 
-static const struct software_node vexia_edu_atla10_touchscreen_node = {
-	.properties = vexia_edu_atla10_touchscreen_props,
+static const struct software_node vexia_edu_atla10_9v_touchscreen_node = {
+	.properties = vexia_edu_atla10_9v_touchscreen_props,
 };
 
-static const struct property_entry vexia_edu_atla10_pmic_props[] = {
+static const struct property_entry vexia_edu_atla10_9v_pmic_props[] = {
 	PROPERTY_ENTRY_BOOL("linux,register-pwrsrc-power_supply"),
 	{ }
 };
 
-static const struct software_node vexia_edu_atla10_pmic_node = {
-	.properties = vexia_edu_atla10_pmic_props,
+static const struct software_node vexia_edu_atla10_9v_pmic_node = {
+	.properties = vexia_edu_atla10_9v_pmic_props,
 };
 
-static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initconst = {
+static const struct x86_i2c_client_info vexia_edu_atla10_9v_i2c_clients[] __initconst = {
 	{
 		/* I2C attached embedded controller, used to access fuel-gauge */
 		.board_info = {
 			.type = "vexia_atla10_ec",
 			.addr = 0x76,
 			.dev_name = "ulpmc",
-			.swnode = &vexia_edu_atla10_ulpmc_node,
+			.swnode = &vexia_edu_atla10_9v_ulpmc_node,
 		},
 		.adapter_path = "0000:00:18.1",
 	}, {
@@ -679,7 +679,7 @@ static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initcon
 			.type = "kxtj21009",
 			.addr = 0x0f,
 			.dev_name = "kxtj21009",
-			.swnode = &vexia_edu_atla10_accel_node,
+			.swnode = &vexia_edu_atla10_9v_accel_node,
 		},
 		.adapter_path = "0000:00:18.5",
 	}, {
@@ -688,7 +688,7 @@ static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initcon
 			.type = "hid-over-i2c",
 			.addr = 0x38,
 			.dev_name = "FTSC1000",
-			.swnode = &vexia_edu_atla10_touchscreen_node,
+			.swnode = &vexia_edu_atla10_9v_touchscreen_node,
 		},
 		.adapter_path = "0000:00:18.6",
 		.irq_data = {
@@ -703,7 +703,7 @@ static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initcon
 			.type = "intel_soc_pmic_crc",
 			.addr = 0x6e,
 			.dev_name = "intel_soc_pmic_crc",
-			.swnode = &vexia_edu_atla10_pmic_node,
+			.swnode = &vexia_edu_atla10_9v_pmic_node,
 		},
 		.adapter_path = "0000:00:18.7",
 		.irq_data = {
@@ -715,7 +715,7 @@ static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initcon
 	}
 };
 
-static const struct x86_serdev_info vexia_edu_atla10_serdevs[] __initconst = {
+static const struct x86_serdev_info vexia_edu_atla10_9v_serdevs[] __initconst = {
 	{
 		.ctrl.pci.devfn = PCI_DEVFN(0x1e, 3),
 		.ctrl_devname = "serial0",
@@ -723,7 +723,7 @@ static const struct x86_serdev_info vexia_edu_atla10_serdevs[] __initconst = {
 	},
 };
 
-static struct gpiod_lookup_table vexia_edu_atla10_ft5416_gpios = {
+static struct gpiod_lookup_table vexia_edu_atla10_9v_ft5416_gpios = {
 	.dev_id = "i2c-FTSC1000",
 	.table = {
 		GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_LOW),
@@ -731,12 +731,12 @@ static struct gpiod_lookup_table vexia_edu_atla10_ft5416_gpios = {
 	},
 };
 
-static struct gpiod_lookup_table * const vexia_edu_atla10_gpios[] = {
-	&vexia_edu_atla10_ft5416_gpios,
+static struct gpiod_lookup_table * const vexia_edu_atla10_9v_gpios[] = {
+	&vexia_edu_atla10_9v_ft5416_gpios,
 	NULL
 };
 
-static int __init vexia_edu_atla10_init(struct device *dev)
+static int __init vexia_edu_atla10_9v_init(struct device *dev)
 {
 	struct pci_dev *pdev;
 	int ret;
@@ -760,13 +760,13 @@ static int __init vexia_edu_atla10_init(struct device *dev)
 	return 0;
 }
 
-const struct x86_dev_info vexia_edu_atla10_info __initconst = {
-	.i2c_client_info = vexia_edu_atla10_i2c_clients,
-	.i2c_client_count = ARRAY_SIZE(vexia_edu_atla10_i2c_clients),
-	.serdev_info = vexia_edu_atla10_serdevs,
-	.serdev_count = ARRAY_SIZE(vexia_edu_atla10_serdevs),
-	.gpiod_lookup_tables = vexia_edu_atla10_gpios,
-	.init = vexia_edu_atla10_init,
+const struct x86_dev_info vexia_edu_atla10_9v_info __initconst = {
+	.i2c_client_info = vexia_edu_atla10_9v_i2c_clients,
+	.i2c_client_count = ARRAY_SIZE(vexia_edu_atla10_9v_i2c_clients),
+	.serdev_info = vexia_edu_atla10_9v_serdevs,
+	.serdev_count = ARRAY_SIZE(vexia_edu_atla10_9v_serdevs),
+	.gpiod_lookup_tables = vexia_edu_atla10_9v_gpios,
+	.init = vexia_edu_atla10_9v_init,
 	.use_pci = true,
 };
 
diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
index 63a38a0069bae..2204bbaf2ed5a 100644
--- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
+++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
@@ -127,7 +127,7 @@ extern const struct x86_dev_info nextbook_ares8_info;
 extern const struct x86_dev_info nextbook_ares8a_info;
 extern const struct x86_dev_info peaq_c1010_info;
 extern const struct x86_dev_info whitelabel_tm800a550l_info;
-extern const struct x86_dev_info vexia_edu_atla10_info;
+extern const struct x86_dev_info vexia_edu_atla10_9v_info;
 extern const struct x86_dev_info xiaomi_mipad2_info;
 extern const struct dmi_system_id x86_android_tablet_ids[];
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 11/30] platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 59df54c67be3e587e4217bddd793350fbe8f5feb ]

The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.

Both are x86 ACPI tablets which ships with Android x86 as factory OS.
with a DSDT which contains a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().

Extend the existing support for the 9V version by adding support for
manually instantiating the I2C devices which are actually present on
the 5V version by adding the necessary device info to
the x86-android-tablets module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/x86/x86-android-tablets/dmi.c    | 12 ++++
 .../platform/x86/x86-android-tablets/other.c  | 60 +++++++++++++++++++
 .../x86-android-tablets/x86-android-tablets.h |  1 +
 3 files changed, 73 insertions(+)

diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
index e43d482b17a35..278c6d151dc49 100644
--- a/drivers/platform/x86/x86-android-tablets/dmi.c
+++ b/drivers/platform/x86/x86-android-tablets/dmi.c
@@ -179,6 +179,18 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
 		},
 		.driver_data = (void *)&peaq_c1010_info,
 	},
+	{
+		/* Vexia Edu Atla 10 tablet 5V version */
+		.matches = {
+			/* Having all 3 of these not set is somewhat unique */
+			DMI_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."),
+			DMI_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "05/14/2015"),
+		},
+		.driver_data = (void *)&vexia_edu_atla10_5v_info,
+	},
 	{
 		/* Vexia Edu Atla 10 tablet 9V version */
 		.matches = {
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index 74dcac8d19d72..f7bd9f863c85e 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -598,6 +598,66 @@ const struct x86_dev_info whitelabel_tm800a550l_info __initconst = {
 	.gpiod_lookup_tables = whitelabel_tm800a550l_gpios,
 };
 
+/*
+ * Vexia EDU ATLA 10 tablet 5V, Android 4.4 + Guadalinex Ubuntu tablet
+ * distributed to schools in the Spanish Andalucía region.
+ */
+static const struct property_entry vexia_edu_atla10_5v_touchscreen_props[] = {
+	PROPERTY_ENTRY_U32("hid-descr-addr", 0x0000),
+	PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 120),
+	{ }
+};
+
+static const struct software_node vexia_edu_atla10_5v_touchscreen_node = {
+	.properties = vexia_edu_atla10_5v_touchscreen_props,
+};
+
+static const struct x86_i2c_client_info vexia_edu_atla10_5v_i2c_clients[] __initconst = {
+	{
+		/* kxcjk1013 accelerometer */
+		.board_info = {
+			.type = "kxcjk1013",
+			.addr = 0x0f,
+			.dev_name = "kxcjk1013",
+		},
+		.adapter_path = "\\_SB_.I2C3",
+	}, {
+		/*  touchscreen controller */
+		.board_info = {
+			.type = "hid-over-i2c",
+			.addr = 0x38,
+			.dev_name = "FTSC1000",
+			.swnode = &vexia_edu_atla10_5v_touchscreen_node,
+		},
+		.adapter_path = "\\_SB_.I2C4",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_APIC,
+			.index = 0x44,
+			.trigger = ACPI_LEVEL_SENSITIVE,
+			.polarity = ACPI_ACTIVE_HIGH,
+		},
+	}
+};
+
+static struct gpiod_lookup_table vexia_edu_atla10_5v_ft5416_gpios = {
+	.dev_id = "i2c-FTSC1000",
+	.table = {
+		GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table * const vexia_edu_atla10_5v_gpios[] = {
+	&vexia_edu_atla10_5v_ft5416_gpios,
+	NULL
+};
+
+const struct x86_dev_info vexia_edu_atla10_5v_info __initconst = {
+	.i2c_client_info = vexia_edu_atla10_5v_i2c_clients,
+	.i2c_client_count = ARRAY_SIZE(vexia_edu_atla10_5v_i2c_clients),
+	.gpiod_lookup_tables = vexia_edu_atla10_5v_gpios,
+};
+
 /*
  * Vexia EDU ATLA 10 tablet 9V, Android 4.2 + Guadalinex Ubuntu tablet
  * distributed to schools in the Spanish Andalucía region.
diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
index 2204bbaf2ed5a..dcf8d49e3b5f4 100644
--- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
+++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
@@ -127,6 +127,7 @@ extern const struct x86_dev_info nextbook_ares8_info;
 extern const struct x86_dev_info nextbook_ares8a_info;
 extern const struct x86_dev_info peaq_c1010_info;
 extern const struct x86_dev_info whitelabel_tm800a550l_info;
+extern const struct x86_dev_info vexia_edu_atla10_5v_info;
 extern const struct x86_dev_info vexia_edu_atla10_9v_info;
 extern const struct x86_dev_info xiaomi_mipad2_info;
 extern const struct dmi_system_id x86_android_tablet_ids[];
-- 
2.39.5

[PATCH AUTOSEL 6.14 12/30] netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS

[Sasha Levin]

From: Song Liu <song@kernel.org>

[ Upstream commit 40cb48eba3b4b79e110c1a35d33a48cac54507a2 ]

When testing a special config:

CONFIG_NETFS_SUPPORTS=y
CONFIG_PROC_FS=n

The system crashes with something like:

[    3.766197] ------------[ cut here ]------------
[    3.766484] kernel BUG at mm/mempool.c:560!
[    3.766789] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[    3.767123] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G        W
[    3.767777] Tainted: [W]=WARN
[    3.767968] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
[    3.768523] RIP: 0010:mempool_alloc_slab.cold+0x17/0x19
[    3.768847] Code: 50 fe ff 58 5b 5d 41 5c 41 5d 41 5e 41 5f e9 93 95 13 00
[    3.769977] RSP: 0018:ffffc90000013998 EFLAGS: 00010286
[    3.770315] RAX: 000000000000002f RBX: ffff888100ba8640 RCX: 0000000000000000
[    3.770749] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 00000000ffffffff
[    3.771217] RBP: 0000000000092880 R08: 0000000000000000 R09: ffffc90000013828
[    3.771664] R10: 0000000000000001 R11: 00000000ffffffea R12: 0000000000092cc0
[    3.772117] R13: 0000000000000400 R14: ffff8881004b1620 R15: ffffea0004ef7e40
[    3.772554] FS:  0000000000000000(0000) GS:ffff8881b5f3c000(0000) knlGS:0000000000000000
[    3.773061] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.773443] CR2: ffffffff830901b4 CR3: 0000000004296001 CR4: 0000000000770ef0
[    3.773884] PKRU: 55555554
[    3.774058] Call Trace:
[    3.774232]  <TASK>
[    3.774371]  mempool_alloc_noprof+0x6a/0x190
[    3.774649]  ? _printk+0x57/0x80
[    3.774862]  netfs_alloc_request+0x85/0x2ce
[    3.775147]  netfs_readahead+0x28/0x170
[    3.775395]  read_pages+0x6c/0x350
[    3.775623]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.775928]  page_cache_ra_unbounded+0x1bd/0x2a0
[    3.776247]  filemap_get_pages+0x139/0x970
[    3.776510]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.776820]  filemap_read+0xf9/0x580
[    3.777054]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.777368]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.777674]  ? find_held_lock+0x32/0x90
[    3.777929]  ? netfs_start_io_read+0x19/0x70
[    3.778221]  ? netfs_start_io_read+0x19/0x70
[    3.778489]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.778800]  ? lock_acquired+0x1e6/0x450
[    3.779054]  ? srso_alias_return_thunk+0x5/0xfbef5
[    3.779379]  netfs_buffered_read_iter+0x57/0x80
[    3.779670]  __kernel_read+0x158/0x2c0
[    3.779927]  bprm_execve+0x300/0x7a0
[    3.780185]  kernel_execve+0x10c/0x140
[    3.780423]  ? __pfx_kernel_init+0x10/0x10
[    3.780690]  kernel_init+0xd5/0x150
[    3.780910]  ret_from_fork+0x2d/0x50
[    3.781156]  ? __pfx_kernel_init+0x10/0x10
[    3.781414]  ret_from_fork_asm+0x1a/0x30
[    3.781677]  </TASK>
[    3.781823] Modules linked in:
[    3.782065] ---[ end trace 0000000000000000 ]---

This is caused by the following error path in netfs_init():

        if (!proc_mkdir("fs/netfs", NULL))
                goto error_proc;

Fix this by adding ifdef in netfs_main(), so that /proc/fs/netfs is only
created with CONFIG_PROC_FS.

Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/20250409170015.2651829-1-song@kernel.org
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/netfs/main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/netfs/main.c b/fs/netfs/main.c
index 4e3e620408314..70ecc8f5f2103 100644
--- a/fs/netfs/main.c
+++ b/fs/netfs/main.c
@@ -127,11 +127,13 @@ static int __init netfs_init(void)
 	if (mempool_init_slab_pool(&netfs_subrequest_pool, 100, netfs_subrequest_slab) < 0)
 		goto error_subreqpool;
 
+#ifdef CONFIG_PROC_FS
 	if (!proc_mkdir("fs/netfs", NULL))
 		goto error_proc;
 	if (!proc_create_seq("fs/netfs/requests", S_IFREG | 0444, NULL,
 			     &netfs_requests_seq_ops))
 		goto error_procfile;
+#endif
 #ifdef CONFIG_FSCACHE_STATS
 	if (!proc_create_single("fs/netfs/stats", S_IFREG | 0444, NULL,
 				netfs_stats_show))
@@ -144,9 +146,11 @@ static int __init netfs_init(void)
 	return 0;
 
 error_fscache:
+#ifdef CONFIG_PROC_FS
 error_procfile:
 	remove_proc_subtree("fs/netfs", NULL);
 error_proc:
+#endif
 	mempool_exit(&netfs_subrequest_pool);
 error_subreqpool:
 	kmem_cache_destroy(netfs_subrequest_slab);
-- 
2.39.5

[PATCH AUTOSEL 6.14 13/30] iomap: skip unnecessary ifs_block_is_uptodate check

[Sasha Levin]

From: Gou Hao <gouhao@uniontech.com>

[ Upstream commit 8e3c15ee0d292c413c66fe10201d1b035a0bea72 ]

In iomap_adjust_read_range, i is either the first !uptodate block, or it
is past last for the second loop looking for trailing uptodate blocks.
Assuming there's no overflow (there's no combination of huge folios and
tiny blksize) then yeah, there is no point in retesting that the same
block pointed to by i is uptodate since we hold the folio lock so nobody
else could have set it uptodate.

Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/20250410071236.16017-1-gouhao@uniontech.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap/buffered-io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index d303e6c8900cd..a47e3afd724ca 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -263,7 +263,7 @@ static void iomap_adjust_read_range(struct inode *inode, struct folio *folio,
 		}
 
 		/* truncate len if we find any trailing uptodate block(s) */
-		for ( ; i <= last; i++) {
+		while (++i <= last) {
 			if (ifs_block_is_uptodate(ifs, i)) {
 				plen -= (last - i + 1) * block_size;
 				last = i - 1;
-- 
2.39.5

[PATCH AUTOSEL 6.14 14/30] riscv: Provide all alternative macros all the time

[Sasha Levin]

From: Andrew Jones <ajones@ventanamicro.com>

[ Upstream commit fb53a9aa5f5b8bf302f3260a7f1f5a24345ce62a ]

We need to provide all six forms of the alternative macros
(ALTERNATIVE, ALTERNATIVE_2, _ALTERNATIVE_CFG, _ALTERNATIVE_CFG_2,
__ALTERNATIVE_CFG, __ALTERNATIVE_CFG_2) for all four cases derived
from the two ifdefs (RISCV_ALTERNATIVE, __ASSEMBLY__) in order to
ensure all configs can compile. Define this missing ones and ensure
all are defined to consume all parameters passed.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504130710.3IKz6Ibs-lkp@intel.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250414120947.135173-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/alternative-macros.h | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
index 721ec275ce57e..231d777d936c2 100644
--- a/arch/riscv/include/asm/alternative-macros.h
+++ b/arch/riscv/include/asm/alternative-macros.h
@@ -115,24 +115,19 @@
 	\old_c
 .endm
 
-#define _ALTERNATIVE_CFG(old_c, ...)	\
-	ALTERNATIVE_CFG old_c
-
-#define _ALTERNATIVE_CFG_2(old_c, ...)	\
-	ALTERNATIVE_CFG old_c
+#define __ALTERNATIVE_CFG(old_c, ...)		ALTERNATIVE_CFG old_c
+#define __ALTERNATIVE_CFG_2(old_c, ...)		ALTERNATIVE_CFG old_c
 
 #else /* !__ASSEMBLY__ */
 
-#define __ALTERNATIVE_CFG(old_c)	\
-	old_c "\n"
+#define __ALTERNATIVE_CFG(old_c, ...)		old_c "\n"
+#define __ALTERNATIVE_CFG_2(old_c, ...)		old_c "\n"
 
-#define _ALTERNATIVE_CFG(old_c, ...)	\
-	__ALTERNATIVE_CFG(old_c)
+#endif /* __ASSEMBLY__ */
 
-#define _ALTERNATIVE_CFG_2(old_c, ...)	\
-	__ALTERNATIVE_CFG(old_c)
+#define _ALTERNATIVE_CFG(old_c, ...)		__ALTERNATIVE_CFG(old_c)
+#define _ALTERNATIVE_CFG_2(old_c, ...)		__ALTERNATIVE_CFG_2(old_c)
 
-#endif /* __ASSEMBLY__ */
 #endif /* CONFIG_RISCV_ALTERNATIVE */
 
 /*
-- 
2.39.5

[PATCH AUTOSEL 6.14 15/30] ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING"

[Sasha Levin]

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit 1df0d4c616138784e033ad337961b6e1a6bcd999 ]

wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:

do not call blocking ops when !TASK_RUNNING; state=2 set at
 [<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160

mutex lock is not needed in ksmbd_durable_scavenger_alive().

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/vfs_cache.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c
index 8d1f30dcba7e8..1f8fa3468173a 100644
--- a/fs/smb/server/vfs_cache.c
+++ b/fs/smb/server/vfs_cache.c
@@ -713,12 +713,8 @@ static bool tree_conn_fd_check(struct ksmbd_tree_connect *tcon,
 
 static bool ksmbd_durable_scavenger_alive(void)
 {
-	mutex_lock(&durable_scavenger_lock);
-	if (!durable_scavenger_running) {
-		mutex_unlock(&durable_scavenger_lock);
+	if (!durable_scavenger_running)
 		return false;
-	}
-	mutex_unlock(&durable_scavenger_lock);
 
 	if (kthread_should_stop())
 		return false;
@@ -799,9 +795,7 @@ static int ksmbd_durable_scavenger(void *dummy)
 			break;
 	}
 
-	mutex_lock(&durable_scavenger_lock);
 	durable_scavenger_running = false;
-	mutex_unlock(&durable_scavenger_lock);
 
 	module_put(THIS_MODULE);
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 16/30] loop: aio inherit the ioprio of original request

[Sasha Levin]

From: Yunlong Xing <yunlong.xing@unisoc.com>

[ Upstream commit 1fdb8188c3d505452b40cdb365b1bb32be533a8e ]

Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.

Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/loop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c05fe27a96b64..1a4dbd4116069 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -471,7 +471,7 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
 	cmd->iocb.ki_filp = file;
 	cmd->iocb.ki_complete = lo_rw_aio_complete;
 	cmd->iocb.ki_flags = IOCB_DIRECT;
-	cmd->iocb.ki_ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, 0);
+	cmd->iocb.ki_ioprio = req_get_ioprio(rq);
 
 	if (rw == ITER_SOURCE)
 		ret = file->f_op->write_iter(&cmd->iocb, &iter);
-- 
2.39.5

[PATCH AUTOSEL 6.14 17/30] spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 41c721fc093938745d116c3a21326a0ee03bb491 ]

Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:

    dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
    94451

This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra210-quad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 08e49a8768943..2d320fbb8875f 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1117,7 +1117,7 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 					(&tqspi->xfer_completion,
 					QSPI_DMA_TIMEOUT);
 
-			if (WARN_ON(ret == 0)) {
+			if (WARN_ON_ONCE(ret == 0)) {
 				dev_err(tqspi->dev, "QSPI Transfer failed with timeout: %d\n",
 					ret);
 				if (tqspi->is_curr_dma_xfer &&
-- 
2.39.5

[PATCH AUTOSEL 6.14 18/30] spi: tegra210-quad: add rate limiting and simplify timeout error message

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 21f4314e66ed8d40b2ee24185d1a06a07a512eb1 ]

On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:

1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
   when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
   as 'ret' is always zero in this error path

These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra210-quad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 2d320fbb8875f..64e1b2f8a0001 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1118,8 +1118,8 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 					QSPI_DMA_TIMEOUT);
 
 			if (WARN_ON_ONCE(ret == 0)) {
-				dev_err(tqspi->dev, "QSPI Transfer failed with timeout: %d\n",
-					ret);
+				dev_err_ratelimited(tqspi->dev,
+						    "QSPI Transfer failed with timeout\n");
 				if (tqspi->is_curr_dma_xfer &&
 				    (tqspi->cur_direction & DATA_DIR_TX))
 					dmaengine_terminate_all
-- 
2.39.5

[PATCH AUTOSEL 6.14 19/30] hardening: Disable GCC randstruct for COMPILE_TEST

[Sasha Levin]

From: Kees Cook <kees@kernel.org>

[ Upstream commit f5c68a4e84f9feca3be578199ec648b676db2030 ]

There is a GCC crash bug in the randstruct for latest GCC versions that
is being tickled by landlock[1]. Temporarily disable GCC randstruct for
COMPILE_TEST builds to unbreak CI systems for the coming -rc2. This can
be restored once the bug is fixed.

Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/ [1]
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250409151154.work.872-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/Kconfig.hardening | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/Kconfig.hardening b/security/Kconfig.hardening
index b56e001e0c6a9..10be745c13ba5 100644
--- a/security/Kconfig.hardening
+++ b/security/Kconfig.hardening
@@ -311,7 +311,7 @@ config CC_HAS_RANDSTRUCT
 
 choice
 	prompt "Randomize layout of sensitive kernel structures"
-	default RANDSTRUCT_FULL if COMPILE_TEST && (GCC_PLUGINS || CC_HAS_RANDSTRUCT)
+	default RANDSTRUCT_FULL if COMPILE_TEST && CC_HAS_RANDSTRUCT
 	default RANDSTRUCT_NONE
 	help
 	  If you enable this, the layouts of structures that are entirely
-- 
2.39.5

[PATCH AUTOSEL 6.14 20/30] ubsan: Fix panic from test_ubsan_out_of_bounds

[Sasha Levin]

From: Mostafa Saleh <smostafa@google.com>

[ Upstream commit 9b044614be12d78d3a93767708b8d02fb7dfa9b0 ]

Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:

[   31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[   31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[   31.648153] Hardware name: linux,dummy-virt (DT)
[   31.648970] Call trace:
[   31.649345]  show_stack+0x18/0x24 (C)
[   31.650960]  dump_stack_lvl+0x40/0x84
[   31.651559]  dump_stack+0x18/0x24
[   31.652264]  panic+0x138/0x3b4
[   31.652812]  __ktime_get_real_seconds+0x0/0x10
[   31.653540]  test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[   31.654388]  init_module+0x24/0xff4 [test_ubsan]
[   31.655077]  do_one_initcall+0xd4/0x280
[   31.655680]  do_init_module+0x58/0x2b4

That happens because the test corrupts other data in the stack:
400:   d5384108        mrs     x8, sp_el0
404:   f9426d08        ldr     x8, [x8, #1240]
408:   f85f83a9        ldur    x9, [x29, #-8]
40c:   eb09011f        cmp     x8, x9
410:   54000301        b.ne    470 <test_ubsan_out_of_bounds+0x154>  // b.any

As there is no guarantee the compiler will order the local variables
as declared in the module:
        volatile char above[4] = { }; /* Protect surrounding memory. */
        volatile int arr[4];
        volatile char below[4] = { }; /* Protect surrounding memory. */

There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.

So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()

Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_ubsan.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/lib/test_ubsan.c b/lib/test_ubsan.c
index 5d7b10e986107..63b7566e78639 100644
--- a/lib/test_ubsan.c
+++ b/lib/test_ubsan.c
@@ -68,18 +68,22 @@ static void test_ubsan_shift_out_of_bounds(void)
 
 static void test_ubsan_out_of_bounds(void)
 {
-	volatile int i = 4, j = 5, k = -1;
-	volatile char above[4] = { }; /* Protect surrounding memory. */
-	volatile int arr[4];
-	volatile char below[4] = { }; /* Protect surrounding memory. */
+	int i = 4, j = 4, k = -1;
+	volatile struct {
+		char above[4]; /* Protect surrounding memory. */
+		int arr[4];
+		char below[4]; /* Protect surrounding memory. */
+	} data;
 
-	above[0] = below[0];
+	OPTIMIZER_HIDE_VAR(i);
+	OPTIMIZER_HIDE_VAR(j);
+	OPTIMIZER_HIDE_VAR(k);
 
 	UBSAN_TEST(CONFIG_UBSAN_BOUNDS, "above");
-	arr[j] = i;
+	data.arr[j] = i;
 
 	UBSAN_TEST(CONFIG_UBSAN_BOUNDS, "below");
-	arr[k] = i;
+	data.arr[k] = i;
 }
 
 enum ubsan_test_enum {
-- 
2.39.5

[PATCH AUTOSEL 6.14 21/30] nvmet: pci-epf: cleanup link state management

[Sasha Levin]

From: Damien Le Moal <dlemoal@kernel.org>

[ Upstream commit ad91308d3bdeb9d90ef4a400f379ce461f0fb6a7 ]

Since the link_up boolean field of struct nvmet_pci_epf_ctrl is always
set to true when nvmet_pci_epf_start_ctrl() is called, assign true to
this field in nvmet_pci_epf_start_ctrl(). Conversely, since this field
is set to false when nvmet_pci_epf_stop_ctrl() is called, set this field
to false directly inside that function.

While at it, also add information messages to notify the user of the PCI
link state changes to help troubleshoot any link stability issues
without needing to enable debug messages.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/pci-epf.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/target/pci-epf.c b/drivers/nvme/target/pci-epf.c
index 99563648c318f..094826f81b283 100644
--- a/drivers/nvme/target/pci-epf.c
+++ b/drivers/nvme/target/pci-epf.c
@@ -2084,11 +2084,18 @@ static int nvmet_pci_epf_create_ctrl(struct nvmet_pci_epf *nvme_epf,
 
 static void nvmet_pci_epf_start_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
 {
+
+	dev_info(ctrl->dev, "PCI link up\n");
+	ctrl->link_up = true;
+
 	schedule_delayed_work(&ctrl->poll_cc, NVMET_PCI_EPF_CC_POLL_INTERVAL);
 }
 
 static void nvmet_pci_epf_stop_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
 {
+	dev_info(ctrl->dev, "PCI link down\n");
+	ctrl->link_up = false;
+
 	cancel_delayed_work_sync(&ctrl->poll_cc);
 
 	nvmet_pci_epf_disable_ctrl(ctrl);
@@ -2314,10 +2321,8 @@ static int nvmet_pci_epf_epc_init(struct pci_epf *epf)
 	if (ret)
 		goto out_clear_bar;
 
-	if (!epc_features->linkup_notifier) {
-		ctrl->link_up = true;
+	if (!epc_features->linkup_notifier)
 		nvmet_pci_epf_start_ctrl(&nvme_epf->ctrl);
-	}
 
 	return 0;
 
@@ -2333,7 +2338,6 @@ static void nvmet_pci_epf_epc_deinit(struct pci_epf *epf)
 	struct nvmet_pci_epf *nvme_epf = epf_get_drvdata(epf);
 	struct nvmet_pci_epf_ctrl *ctrl = &nvme_epf->ctrl;
 
-	ctrl->link_up = false;
 	nvmet_pci_epf_destroy_ctrl(ctrl);
 
 	nvmet_pci_epf_deinit_dma(nvme_epf);
@@ -2345,7 +2349,6 @@ static int nvmet_pci_epf_link_up(struct pci_epf *epf)
 	struct nvmet_pci_epf *nvme_epf = epf_get_drvdata(epf);
 	struct nvmet_pci_epf_ctrl *ctrl = &nvme_epf->ctrl;
 
-	ctrl->link_up = true;
 	nvmet_pci_epf_start_ctrl(ctrl);
 
 	return 0;
@@ -2356,7 +2359,6 @@ static int nvmet_pci_epf_link_down(struct pci_epf *epf)
 	struct nvmet_pci_epf *nvme_epf = epf_get_drvdata(epf);
 	struct nvmet_pci_epf_ctrl *ctrl = &nvme_epf->ctrl;
 
-	ctrl->link_up = false;
 	nvmet_pci_epf_stop_ctrl(ctrl);
 
 	return 0;
-- 
2.39.5

[PATCH AUTOSEL 6.14 22/30] x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores

[Sasha Levin]

From: Pi Xiange <xiange.pi@intel.com>

[ Upstream commit d466304c4322ad391797437cd84cca7ce1660de0 ]

Bartlett Lake has a P-core only product with Raptor Cove.

[ mingo: Switch around the define as pointed out by Christian Ludloff:
         Ratpr Cove is the core, Bartlett Lake is the product.

Signed-off-by: Pi Xiange <xiange.pi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Christian Ludloff <ludloff@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250414032839.5368-1-xiange.pi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/intel-family.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 6d7b04ffc5fd0..ef5a06ddf0287 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -115,6 +115,8 @@
 #define INTEL_GRANITERAPIDS_X		IFM(6, 0xAD)
 #define INTEL_GRANITERAPIDS_D		IFM(6, 0xAE)
 
+#define INTEL_BARTLETTLAKE		IFM(6, 0xD7) /* Raptor Cove */
+
 /* "Hybrid" Processors (P-Core/E-Core) */
 
 #define INTEL_LAKEFIELD			IFM(6, 0x8A) /* Sunny Cove / Tremont */
-- 
2.39.5

[PATCH AUTOSEL 6.14 23/30] md/raid1: Add check for missing source disk in process_checks()

[Sasha Levin]

From: Meir Elisha <meir.elisha@volumez.com>

[ Upstream commit b7c178d9e57c8fd4238ff77263b877f6f16182ba ]

During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.

If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.

Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 15829ab192d2b..7373dff023d0f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2199,14 +2199,9 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 				if (!rdev_set_badblocks(rdev, sect, s, 0))
 					abort = 1;
 			}
-			if (abort) {
-				conf->recovery_disabled =
-					mddev->recovery_disabled;
-				set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-				md_done_sync(mddev, r1_bio->sectors, 0);
-				put_buf(r1_bio);
+			if (abort)
 				return 0;
-			}
+
 			/* Try next page */
 			sectors -= s;
 			sect += s;
@@ -2345,10 +2340,21 @@ static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio)
 	int disks = conf->raid_disks * 2;
 	struct bio *wbio;
 
-	if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
-		/* ouch - failed to read all of that. */
-		if (!fix_sync_read_error(r1_bio))
+	if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) {
+		/*
+		 * ouch - failed to read all of that.
+		 * No need to fix read error for check/repair
+		 * because all member disks are read.
+		 */
+		if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) ||
+		    !fix_sync_read_error(r1_bio)) {
+			conf->recovery_disabled = mddev->recovery_disabled;
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
+			md_done_sync(mddev, r1_bio->sectors, 0);
+			put_buf(r1_bio);
 			return;
+		}
+	}
 
 	if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
 		process_checks(r1_bio);
-- 
2.39.5

[PATCH AUTOSEL 6.14 24/30] riscv: Avoid fortify warning in syscall_get_arguments()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 1413708f990cb7d025affd706ba9c23e2bfc1a27 ]

When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():

  In file included from include/linux/string.h:392,
                   from include/linux/bitmap.h:13,
                   from include/linux/cpumask.h:12,
                   from arch/riscv/include/asm/processor.h:55,
                   from include/linux/sched.h:13,
                   from kernel/ptrace.c:13:
  In function 'fortify_memcpy_chk',
      inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
  include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
    580 |                         __read_overflow2_field(q_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.

Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c66 ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").

Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/syscall.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h
index 121fff429dce6..eceabf59ae482 100644
--- a/arch/riscv/include/asm/syscall.h
+++ b/arch/riscv/include/asm/syscall.h
@@ -62,8 +62,11 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned long *args)
 {
 	args[0] = regs->orig_a0;
-	args++;
-	memcpy(args, &regs->a1, 5 * sizeof(args[0]));
+	args[1] = regs->a1;
+	args[2] = regs->a2;
+	args[3] = regs->a3;
+	args[4] = regs->a4;
+	args[5] = regs->a5;
 }
 
 static inline int syscall_get_arch(struct task_struct *task)
-- 
2.39.5

[PATCH AUTOSEL 6.14 25/30] drm/amdgpu: use a dummy owner for sysfs triggered cleaner shaders v4

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 447fab30955cf7dba7dd563f42b67c02284860c8 ]

Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.

v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b2ae7d492675e8af8902f103364bef59382b935)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index c1f35ded684e8..506786784e32d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -1411,9 +1411,11 @@ static int amdgpu_gfx_run_cleaner_shader_job(struct amdgpu_ring *ring)
 	struct amdgpu_device *adev = ring->adev;
 	struct drm_gpu_scheduler *sched = &ring->sched;
 	struct drm_sched_entity entity;
+	static atomic_t counter;
 	struct dma_fence *f;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
+	void *owner;
 	int i, r;
 
 	/* Initialize the scheduler entity */
@@ -1424,9 +1426,15 @@ static int amdgpu_gfx_run_cleaner_shader_job(struct amdgpu_ring *ring)
 		goto err;
 	}
 
-	r = amdgpu_job_alloc_with_ib(ring->adev, &entity, NULL,
-				     64, 0,
-				     &job);
+	/*
+	 * Use some unique dummy value as the owner to make sure we execute
+	 * the cleaner shader on each submission. The value just need to change
+	 * for each submission and is otherwise meaningless.
+	 */
+	owner = (void *)(unsigned long)atomic_inc_return(&counter);
+
+	r = amdgpu_job_alloc_with_ib(ring->adev, &entity, owner,
+				     64, 0, &job);
 	if (r)
 		goto err;
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 26/30] drm/amd: Forbid suspending into non-default suspend states

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 1657793def101dac7c9d3b2250391f6a3dd934ba ]

On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first.  If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.

Forbid this behavior and only allow suspending in the last state
supported by the system.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2aabd44aa8a3c08da3d43264c168370f6da5e81d)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h     |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 +++++++++++++-
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 69895fccb474a..bbfeba7816075 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1119,6 +1119,7 @@ struct amdgpu_device {
 	bool				in_s3;
 	bool				in_s4;
 	bool				in_s0ix;
+	suspend_state_t			last_suspend_state;
 
 	enum pp_mp1_state               mp1_state;
 	struct amdgpu_doorbell_index doorbell_index;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index c0ddbe7d6f0bc..284cf70562907 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2511,8 +2511,20 @@ static int amdgpu_pmops_suspend(struct device *dev)
 		adev->in_s0ix = true;
 	else if (amdgpu_acpi_is_s3_active(adev))
 		adev->in_s3 = true;
-	if (!adev->in_s0ix && !adev->in_s3)
+	if (!adev->in_s0ix && !adev->in_s3) {
+		/* don't allow going deep first time followed by s2idle the next time */
+		if (adev->last_suspend_state != PM_SUSPEND_ON &&
+		    adev->last_suspend_state != pm_suspend_target_state) {
+			drm_err_once(drm_dev, "Unsupported suspend state %d\n",
+				     pm_suspend_target_state);
+			return -EINVAL;
+		}
 		return 0;
+	}
+
+	/* cache the state last used for suspend */
+	adev->last_suspend_state = pm_suspend_target_state;
+
 	return amdgpu_device_suspend(drm_dev, true);
 }
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 27/30] drm/amdgpu: Use the right function for hdp flush

[Sasha Levin]

From: Lijo Lazar <lijo.lazar@amd.com>

[ Upstream commit c235a7132258ac30bd43d228222986022d21f5de ]

There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d9bff4cf8c53d33ee2ff1b11574e5da739ce61c)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c |  8 ++++----
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 12 ++++++------
 drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c |  6 +++---
 drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/gmc_v12_0.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c  |  2 +-
 drivers/gpu/drm/amd/amdgpu/psp_v11_0.c |  2 +-
 drivers/gpu/drm/amd/amdgpu/psp_v13_0.c |  2 +-
 drivers/gpu/drm/amd/amdgpu/psp_v14_0.c |  2 +-
 10 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 5ba263fe55121..1f32c531f610e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -6044,7 +6044,7 @@ static int gfx_v10_0_cp_gfx_load_pfp_microcode(struct amdgpu_device *adev)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, mmCP_PFP_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_PFP_IC_BASE_CNTL, VMID, 0);
@@ -6122,7 +6122,7 @@ static int gfx_v10_0_cp_gfx_load_ce_microcode(struct amdgpu_device *adev)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, mmCP_CE_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_CE_IC_BASE_CNTL, VMID, 0);
@@ -6199,7 +6199,7 @@ static int gfx_v10_0_cp_gfx_load_me_microcode(struct amdgpu_device *adev)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, mmCP_ME_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_ME_IC_BASE_CNTL, VMID, 0);
@@ -6574,7 +6574,7 @@ static int gfx_v10_0_cp_compute_load_microcode(struct amdgpu_device *adev)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, mmCP_CPC_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_CPC_IC_BASE_CNTL, CACHE_POLICY, 0);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index cfb51baa581a1..f1f53c7687410 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -2391,7 +2391,7 @@ static int gfx_v11_0_config_me_cache(struct amdgpu_device *adev, uint64_t addr)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, regCP_ME_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_ME_IC_BASE_CNTL, VMID, 0);
@@ -2435,7 +2435,7 @@ static int gfx_v11_0_config_pfp_cache(struct amdgpu_device *adev, uint64_t addr)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, regCP_PFP_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_PFP_IC_BASE_CNTL, VMID, 0);
@@ -2480,7 +2480,7 @@ static int gfx_v11_0_config_mec_cache(struct amdgpu_device *adev, uint64_t addr)
 	}
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	tmp = RREG32_SOC15(GC, 0, regCP_CPC_IC_BASE_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_CPC_IC_BASE_CNTL, CACHE_POLICY, 0);
@@ -3115,7 +3115,7 @@ static int gfx_v11_0_cp_gfx_load_pfp_microcode_rs64(struct amdgpu_device *adev)
 	amdgpu_bo_unreserve(adev->gfx.pfp.pfp_fw_data_obj);
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	WREG32_SOC15(GC, 0, regCP_PFP_IC_BASE_LO,
 		lower_32_bits(adev->gfx.pfp.pfp_fw_gpu_addr));
@@ -3333,7 +3333,7 @@ static int gfx_v11_0_cp_gfx_load_me_microcode_rs64(struct amdgpu_device *adev)
 	amdgpu_bo_unreserve(adev->gfx.me.me_fw_data_obj);
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	WREG32_SOC15(GC, 0, regCP_ME_IC_BASE_LO,
 		lower_32_bits(adev->gfx.me.me_fw_gpu_addr));
@@ -4549,7 +4549,7 @@ static int gfx_v11_0_gfxhub_enable(struct amdgpu_device *adev)
 	if (r)
 		return r;
 
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	value = (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) ?
 		false : true;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c
index c21b168f75a75..0c08785099f32 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c
@@ -2306,7 +2306,7 @@ static int gfx_v12_0_cp_gfx_load_pfp_microcode_rs64(struct amdgpu_device *adev)
 	amdgpu_bo_unreserve(adev->gfx.pfp.pfp_fw_data_obj);
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	WREG32_SOC15(GC, 0, regCP_PFP_IC_BASE_LO,
 		lower_32_bits(adev->gfx.pfp.pfp_fw_gpu_addr));
@@ -2450,7 +2450,7 @@ static int gfx_v12_0_cp_gfx_load_me_microcode_rs64(struct amdgpu_device *adev)
 	amdgpu_bo_unreserve(adev->gfx.me.me_fw_data_obj);
 
 	if (amdgpu_emu_mode == 1)
-		adev->hdp.funcs->flush_hdp(adev, NULL);
+		amdgpu_device_flush_hdp(adev, NULL);
 
 	WREG32_SOC15(GC, 0, regCP_ME_IC_BASE_LO,
 		lower_32_bits(adev->gfx.me.me_fw_gpu_addr));
@@ -3469,7 +3469,7 @@ static int gfx_v12_0_gfxhub_enable(struct amdgpu_device *adev)
 	if (r)
 		return r;
 
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	value = (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) ?
 		false : true;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index 9bedca9a79c63..a88ad9951d328 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -268,7 +268,7 @@ static void gmc_v10_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t vmid,
 	ack = hub->vm_inv_eng0_ack + hub->eng_distance * eng;
 
 	/* flush hdp cache */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	/* This is necessary for SRIOV as well as for GFXOFF to function
 	 * properly under bare metal
@@ -969,7 +969,7 @@ static int gmc_v10_0_gart_enable(struct amdgpu_device *adev)
 	adev->hdp.funcs->init_registers(adev);
 
 	/* Flush HDP after it is initialized */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	value = (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) ?
 		false : true;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
index 72751ab4c766e..1eb97117fe7ae 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
@@ -229,7 +229,7 @@ static void gmc_v11_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t vmid,
 	ack = hub->vm_inv_eng0_ack + hub->eng_distance * eng;
 
 	/* flush hdp cache */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	/* This is necessary for SRIOV as well as for GFXOFF to function
 	 * properly under bare metal
@@ -896,7 +896,7 @@ static int gmc_v11_0_gart_enable(struct amdgpu_device *adev)
 		return r;
 
 	/* Flush HDP after it is initialized */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	value = (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) ?
 		false : true;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v12_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v12_0.c
index c3c144a4f45eb..0f136d6bbdc9b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v12_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v12_0.c
@@ -297,7 +297,7 @@ static void gmc_v12_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t vmid,
 		return;
 
 	/* flush hdp cache */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	/* This is necessary for SRIOV as well as for GFXOFF to function
 	 * properly under bare metal
@@ -881,7 +881,7 @@ static int gmc_v12_0_gart_enable(struct amdgpu_device *adev)
 		return r;
 
 	/* Flush HDP after it is initialized */
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	value = (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) ?
 		false : true;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 291549765c38c..5250b470e5ef3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -2434,7 +2434,7 @@ static int gmc_v9_0_hw_init(struct amdgpu_ip_block *ip_block)
 	adev->hdp.funcs->init_registers(adev);
 
 	/* After HDP is initialized, flush HDP.*/
-	adev->hdp.funcs->flush_hdp(adev, NULL);
+	amdgpu_device_flush_hdp(adev, NULL);
 
 	if (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS)
 		value = false;
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 2395f1856962a..e77a467af7ac3 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -532,7 +532,7 @@ static int psp_v11_0_memory_training(struct psp_context *psp, uint32_t ops)
 			}
 
 			memcpy_toio(adev->mman.aper_base_kaddr, buf, sz);
-			adev->hdp.funcs->flush_hdp(adev, NULL);
+			amdgpu_device_flush_hdp(adev, NULL);
 			vfree(buf);
 			drm_dev_exit(idx);
 		} else {
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c
index cc621064610f1..afdf8ce3b4c59 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c
@@ -610,7 +610,7 @@ static int psp_v13_0_memory_training(struct psp_context *psp, uint32_t ops)
 			}
 
 			memcpy_toio(adev->mman.aper_base_kaddr, buf, sz);
-			adev->hdp.funcs->flush_hdp(adev, NULL);
+			amdgpu_device_flush_hdp(adev, NULL);
 			vfree(buf);
 			drm_dev_exit(idx);
 		} else {
diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v14_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v14_0.c
index 4d33c95a51163..89f6c06946c51 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v14_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v14_0.c
@@ -488,7 +488,7 @@ static int psp_v14_0_memory_training(struct psp_context *psp, uint32_t ops)
 			}
 
 			memcpy_toio(adev->mman.aper_base_kaddr, buf, sz);
-			adev->hdp.funcs->flush_hdp(adev, NULL);
+			amdgpu_device_flush_hdp(adev, NULL);
 			vfree(buf);
 			drm_dev_exit(idx);
 		} else {
-- 
2.39.5

[PATCH AUTOSEL 6.14 28/30] ublk: add ublk_force_abort_dev()

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 00b3b0d7cb454d614117c93f33351cdcd20b5b93 ]

Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io()
in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in
single function.

Meantime not change device state to QUIESCED any more, since the disk is
going to be removed soon.

Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ublk_drv.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 971b793dedd03..611a4b2afbbf3 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1638,22 +1638,20 @@ static void __ublk_quiesce_dev(struct ublk_device *ub)
 	ub->dev_info.state = UBLK_S_DEV_QUIESCED;
 }
 
-static void ublk_unquiesce_dev(struct ublk_device *ub)
+static void ublk_force_abort_dev(struct ublk_device *ub)
 {
 	int i;
 
-	pr_devel("%s: unquiesce ub: dev_id %d state %s\n",
+	pr_devel("%s: force abort ub: dev_id %d state %s\n",
 			__func__, ub->dev_info.dev_id,
 			ub->dev_info.state == UBLK_S_DEV_LIVE ?
 			"LIVE" : "QUIESCED");
-	/* quiesce_work has run. We let requeued rqs be aborted
-	 * before running fallback_wq. "force_abort" must be seen
-	 * after request queue is unqiuesced. Then del_gendisk()
-	 * can move on.
-	 */
+	blk_mq_quiesce_queue(ub->ub_disk->queue);
+	if (ub->dev_info.state == UBLK_S_DEV_LIVE)
+		ublk_wait_tagset_rqs_idle(ub);
+
 	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
 		ublk_get_queue(ub, i)->force_abort = true;
-
 	blk_mq_unquiesce_queue(ub->ub_disk->queue);
 	/* We may have requeued some rqs in ublk_quiesce_queue() */
 	blk_mq_kick_requeue_list(ub->ub_disk->queue);
@@ -1681,11 +1679,8 @@ static void ublk_stop_dev(struct ublk_device *ub)
 	mutex_lock(&ub->mutex);
 	if (ub->dev_info.state == UBLK_S_DEV_DEAD)
 		goto unlock;
-	if (ublk_nosrv_dev_should_queue_io(ub)) {
-		if (ub->dev_info.state == UBLK_S_DEV_LIVE)
-			__ublk_quiesce_dev(ub);
-		ublk_unquiesce_dev(ub);
-	}
+	if (ublk_nosrv_dev_should_queue_io(ub))
+		ublk_force_abort_dev(ub);
 	del_gendisk(ub->ub_disk);
 	disk = ublk_detach_disk(ub);
 	put_disk(disk);
-- 
2.39.5

[PATCH AUTOSEL 6.14 29/30] ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 7e26cb69c5e62152a6f05a2ae23605a983a8ef31 ]

Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request
queue as quiesced. This way is fragile because queue quiesce crosses syscalls
or process contexts.

Switch to rely on ubq->canceling for dealing with
ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose
during io_uring context exiting, and it can be reused before recovering too.
In ublk_queue_rq(), the request will be added to requeue list without
kicking off requeue in case of ubq->canceling, and finally requests added in
requeue list will be dispatched from either ublk_stop_dev() or
ublk_ctrl_end_recovery().

Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery()
to ublk_ctrl_end_recovery(), when IO handling can be recovered completely.

Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used
in same context.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ublk_drv.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 611a4b2afbbf3..264b332a5faaf 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1629,13 +1629,19 @@ static void ublk_wait_tagset_rqs_idle(struct ublk_device *ub)
 
 static void __ublk_quiesce_dev(struct ublk_device *ub)
 {
+	int i;
+
 	pr_devel("%s: quiesce ub: dev_id %d state %s\n",
 			__func__, ub->dev_info.dev_id,
 			ub->dev_info.state == UBLK_S_DEV_LIVE ?
 			"LIVE" : "QUIESCED");
 	blk_mq_quiesce_queue(ub->ub_disk->queue);
+	/* mark every queue as canceling */
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
+		ublk_get_queue(ub, i)->canceling = true;
 	ublk_wait_tagset_rqs_idle(ub);
 	ub->dev_info.state = UBLK_S_DEV_QUIESCED;
+	blk_mq_unquiesce_queue(ub->ub_disk->queue);
 }
 
 static void ublk_force_abort_dev(struct ublk_device *ub)
@@ -2785,7 +2791,6 @@ static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
 	/* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */
 	ubq->ubq_daemon = NULL;
 	ubq->timeout = false;
-	ubq->canceling = false;
 
 	for (i = 0; i < ubq->q_depth; i++) {
 		struct ublk_io *io = &ubq->ios[i];
@@ -2874,20 +2879,18 @@ static int ublk_ctrl_end_recovery(struct ublk_device *ub,
 	pr_devel("%s: new ublksrv_pid %d, dev id %d\n",
 			__func__, ublksrv_pid, header->dev_id);
 
-	if (ublk_nosrv_dev_should_queue_io(ub)) {
-		ub->dev_info.state = UBLK_S_DEV_LIVE;
-		blk_mq_unquiesce_queue(ub->ub_disk->queue);
-		pr_devel("%s: queue unquiesced, dev id %d.\n",
-				__func__, header->dev_id);
-		blk_mq_kick_requeue_list(ub->ub_disk->queue);
-	} else {
-		blk_mq_quiesce_queue(ub->ub_disk->queue);
-		ub->dev_info.state = UBLK_S_DEV_LIVE;
-		for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
-			ublk_get_queue(ub, i)->fail_io = false;
-		}
-		blk_mq_unquiesce_queue(ub->ub_disk->queue);
+	blk_mq_quiesce_queue(ub->ub_disk->queue);
+	ub->dev_info.state = UBLK_S_DEV_LIVE;
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
+		struct ublk_queue *ubq = ublk_get_queue(ub, i);
+
+		ubq->canceling = false;
+		ubq->fail_io = false;
 	}
+	blk_mq_unquiesce_queue(ub->ub_disk->queue);
+	pr_devel("%s: queue unquiesced, dev id %d.\n",
+			__func__, header->dev_id);
+	blk_mq_kick_requeue_list(ub->ub_disk->queue);
 
 	ret = 0;
  out_unlock:
-- 
2.39.5

[PATCH AUTOSEL 6.14 30/30] spi: spi-imx: Add check for spi_imx_setupxfer()

[Sasha Levin]

From: Tamura Dai <kirinode0@gmail.com>

[ Upstream commit 951a04ab3a2db4029debfa48d380ef834b93207e ]

Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
 Call trace:
  0x0
  spi_imx_pio_transfer+0x50/0xd8
  spi_imx_transfer_one+0x18c/0x858
  spi_transfer_one_message+0x43c/0x790
  __spi_pump_transfer_message+0x238/0x5d4
  __spi_sync+0x2b0/0x454
  spi_write_then_read+0x11c/0x200

Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index eeb7d082c2472..c43fb496da956 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1695,9 +1695,12 @@ static int spi_imx_transfer_one(struct spi_controller *controller,
 				struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
+	int ret;
 	struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
 
-	spi_imx_setupxfer(spi, transfer);
+	ret = spi_imx_setupxfer(spi, transfer);
+	if (ret < 0)
+		return ret;
 	transfer->effective_speed_hz = spi_imx->spi_bus_clk;
 
 	/* flush rxfifo before transfer */
-- 
2.39.5