From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
ziyao@disroot.org, kever.yang@rock-chips.com,
nicolas.frattaroli@collabora.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
kernel test robot <lkp@intel.com>
Subject: [PATCH 2/6] arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
Date: Mon, 19 May 2025 00:04:44 +0200 [thread overview]
Message-ID: <20250518220449.2722673-3-heiko@sntech.de> (raw)
In-Reply-To: <20250518220449.2722673-1-heiko@sntech.de>
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:2351.20-2417.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 136 +++++++++++------------
1 file changed, 68 insertions(+), 68 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 3b62e037772a..0e0a37849874 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -429,6 +429,74 @@ simple-audio-card,cpu {
};
};
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3576-pinctrl";
+ rockchip,grf = <&ioc_grf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio@27320000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0x27320000 0x0 0x200>;
+ clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2ae10000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0x2ae10000 0x0 0x200>;
+ clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2ae20000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0x2ae20000 0x0 0x200>;
+ clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2ae30000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0x2ae30000 0x0 0x200>;
+ clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@2ae40000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0x2ae40000 0x0 0x200>;
+ clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+ };
+
pmu_a53: pmu-a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -2347,74 +2415,6 @@ scmi_shmem: scmi-shmem@4010f000 {
compatible = "arm,scmi-shmem";
reg = <0x0 0x4010f000 0x0 0x100>;
};
-
- pinctrl: pinctrl {
- compatible = "rockchip,rk3576-pinctrl";
- rockchip,grf = <&ioc_grf>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio0: gpio@27320000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0x27320000 0x0 0x200>;
- clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@2ae10000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0x2ae10000 0x0 0x200>;
- clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 32 32>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@2ae20000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0x2ae20000 0x0 0x200>;
- clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 64 32>;
- interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@2ae30000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0x2ae30000 0x0 0x200>;
- clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 96 32>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@2ae40000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0x2ae40000 0x0 0x200>;
- clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 128 32>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
- };
};
};
--
2.47.2
next prev parent reply other threads:[~2025-05-18 22:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-18 22:04 [PATCH 0/6] Fix some warnings about PCIe and pinctrl on RK3528/RK3562/RK3576 Heiko Stuebner
2025-05-18 22:04 ` [PATCH 1/6] arm64: dts: rockchip: fix rk3576 pcie unit addresses Heiko Stuebner
2025-05-18 22:04 ` Heiko Stuebner [this message]
2025-05-18 22:04 ` [PATCH 3/6] arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi Heiko Stuebner
2025-05-18 22:04 ` [PATCH 4/6] arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node Heiko Stuebner
2025-05-18 22:04 ` [PATCH 5/6] arm64: dts: rockchip: fix rk3562 pcie unit addresses Heiko Stuebner
2025-05-18 22:04 ` [PATCH 6/6] arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node Heiko Stuebner
2025-05-20 19:09 ` [PATCH 0/6] Fix some warnings about PCIe and pinctrl on RK3528/RK3562/RK3576 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250518220449.2722673-3-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lkp@intel.com \
--cc=nicolas.frattaroli@collabora.com \
--cc=robh@kernel.org \
--cc=ziyao@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox