[PATCH] USB: serial: ftdi_sio: add device ID for U-Blox EVK-M101

[Oleksandr Suvorov <cryosay@gmail.com>]

The U-Blox has a USB Type-C port that presents itself as a USB device
(1546:0506) [1] with four attached FTDI serial ports, connected to:
- EVK-M101 current sensors
- EVK-M101 I2C
- EVK-M101 UART
- EVK-M101 port D

This commit registers U-Blox's VID/PID of this device so that FTDI SIO driver
successfully registers these 4 serial ports.

[1]
usb 5-1.3: new high-speed USB device number 11 using xhci_hcd
usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: EVK-M101
usb 5-1.3: Manufacturer: u-blox AG

Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf

Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 49666c33b41f..5fc9266c1cb3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1074,6 +1074,7 @@ static const struct usb_device_id id_table_combined[] = {
 	/* U-Blox devices */
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
+	{ USB_DEVICE(UBLOX_VID, UBLOX_EVK_M101_PID) },
 	/* FreeCalypso USB adapters */
 	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 4cc1fae8acb9..2539b9e2f712 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1614,6 +1614,7 @@
 #define UBLOX_VID			0x1546
 #define UBLOX_C099F9P_ZED_PID		0x0502
 #define UBLOX_C099F9P_ODIN_PID		0x0503
+#define UBLOX_EVK_M101_PID		0x0506
 
 /*
  * GMC devices
-- 
2.48.1