From: ccc194101@163.com
To: stern@rowland.harvard.edu, gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org, usb-storage@lists.one-eyed-alien.net,
linux-kernel@vger.kernel.org,
Chen Changcheng <chenchangcheng@kylinos.cn>
Subject: [PATCH] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive.
Date: Fri, 7 Nov 2025 14:10:46 +0800 [thread overview]
Message-ID: <20251107061046.32339-1-ccc194101@163.com> (raw)
From: Chen Changcheng <chenchangcheng@kylinos.cn>
The optical drive of ECD819-SU3 has the same vid and pid as INIC-3069,
as follows:
T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=13fd ProdID=3940 Rev= 3.10
S: Manufacturer=HL-DT-ST
S: Product= DVD+-RW GT80N
S: SerialNumber=423349524E4E38303338323439202020
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
This will result in the optical drive device also adding
the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
it will fail, and the reason for the failure is as follows:
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
[ 388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
[ 388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
---
drivers/usb/storage/unusual_uas.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 1477e31d7763..6d32b787bff8 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -97,6 +97,12 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+UNUSUAL_DEV(0x13fd, 0x3940, 0x0310, 0x0310,
+ "Initio Corporation",
+ "external DVD burner ECD819-SU3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ NULL),
+
/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
"Initio Corporation",
base-commit: 284922f4c563aa3a8558a00f2a05722133237fe8
--
2.25.1
next reply other threads:[~2025-11-07 6:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 6:10 ccc194101 [this message]
2025-11-07 15:49 ` [PATCH] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive Alan Stern
2025-11-10 1:41 ` ccc194101
2025-11-11 9:16 ` Alan Swanson
2025-11-09 4:53 ` kernel test robot
2025-11-09 5:05 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251107061046.32339-1-ccc194101@163.com \
--to=ccc194101@163.com \
--cc=chenchangcheng@kylinos.cn \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox