[PATCH net 1/4] net: fec: cancel perout_timer when PEROUT is disabled

[Wei Fang <wei.fang@nxp.com>]

The PEROUT allows the user to set a specified future time to output the
periodic signal. If the future time is far from the current time, the FEC
driver will use hrtimer to configure PEROUT one second before the future
time. However, the hrtimer will not be canceled if the PEROUT is disabled
before the hrtimer expires. So the PEROUT will be configured when the
hrtimer expires, which is not as expected. Therefore, cancel the hrtimer
in fec_ptp_pps_disable() to fix this issue.

Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 drivers/net/ethernet/freescale/fec_ptp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index fa88b47d526c..7a5367ea9410 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -497,6 +497,8 @@ static int fec_ptp_pps_disable(struct fec_enet_private *fep, uint channel)
 {
 	unsigned long flags;
 
+	hrtimer_cancel(&fep->perout_timer);
+
 	spin_lock_irqsave(&fep->tmreg_lock, flags);
 	writel(0, fep->hwp + FEC_TCSR(channel));
 	spin_unlock_irqrestore(&fep->tmreg_lock, flags);
-- 
2.34.1