[PATCH net 3/4] net: fec: do not allow enabling PPS and PEROUT simultaneously

[Wei Fang <wei.fang@nxp.com>]

In the current driver, PPS and PEROUT use the same channel to generate
the events, so they cannot be enabled at the same time. Otherwise, the
later configuration will overwrite the earlier configuration. Therefore,
when configuring PPS, the driver will check whether PEROUT is enabled.
Similarly, when configuring PEROUT, the driver will check whether PPS
is enabled.

Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 drivers/net/ethernet/freescale/fec_ptp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index f31b1626c12f..ed5d59abeb53 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -128,6 +128,12 @@ static int fec_ptp_enable_pps(struct fec_enet_private *fep, uint enable)
 
 	spin_lock_irqsave(&fep->tmreg_lock, flags);
 
+	if (fep->perout_enable) {
+		spin_unlock_irqrestore(&fep->tmreg_lock, flags);
+		dev_err(&fep->pdev->dev, "PEROUT is running");
+		return -EBUSY;
+	}
+
 	if (fep->pps_enable == enable) {
 		spin_unlock_irqrestore(&fep->tmreg_lock, flags);
 		return 0;
@@ -571,6 +577,12 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp,
 			}
 			spin_lock_irqsave(&fep->tmreg_lock, flags);
 
+			if (fep->pps_enable) {
+				dev_err(&fep->pdev->dev, "PPS is running");
+				ret = -EBUSY;
+				goto unlock;
+			}
+
 			if (fep->perout_enable) {
 				dev_err(&fep->pdev->dev,
 					"PEROUT has been enabled\n");
-- 
2.34.1