[PATCH 15/31] gpu: nova-core: Hopper/Blackwell: add FSP falcon EMEM operations

[John Hubbard <jhubbard@nvidia.com>]

Add external memory (EMEM) read/write operations to the GPU's FSP falcon
engine. These operations use Falcon PIO (Programmed I/O) to communicate
with the FSP through indirect memory access.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/gpu/nova-core/falcon/fsp.rs | 60 ++++++++++++++++++++++++++++-
 drivers/gpu/nova-core/regs.rs       | 10 +++++
 2 files changed, 69 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/nova-core/falcon/fsp.rs b/drivers/gpu/nova-core/falcon/fsp.rs
index 7323ae2f2302..9e796e82e556 100644
--- a/drivers/gpu/nova-core/falcon/fsp.rs
+++ b/drivers/gpu/nova-core/falcon/fsp.rs
@@ -5,15 +5,27 @@
 //! The FSP falcon handles secure boot and Chain of Trust operations
 //! on Hopper and Blackwell architectures, replacing SEC2's role.
 
+use kernel::prelude::*;
+
 use crate::{
+    driver::Bar0,
     falcon::{
+        Falcon,
         FalconEngine,
         PFalcon2Base,
         PFalconBase, //
     },
-    regs::macros::RegisterBase,
+    regs::{
+        self,
+        macros::RegisterBase, //
+    },
 };
 
+/// EMEM control register bit 24: write mode.
+const EMEM_CTL_WRITE: u32 = 1 << 24;
+/// EMEM control register bit 25: read mode.
+const EMEM_CTL_READ: u32 = 1 << 25;
+
 /// Type specifying the `Fsp` falcon engine. Cannot be instantiated.
 #[allow(dead_code)]
 pub(crate) struct Fsp(());
@@ -30,3 +42,49 @@ impl RegisterBase<PFalcon2Base> for Fsp {
 impl FalconEngine for Fsp {
     const ID: Self = Fsp(());
 }
+
+impl Falcon<Fsp> {
+    /// Writes `data` to FSP external memory at byte `offset` using Falcon PIO.
+    ///
+    /// Returns `EINVAL` if offset or data length is not 4-byte aligned.
+    #[allow(dead_code)]
+    pub(crate) fn write_emem(&self, bar: &Bar0, offset: u32, data: &[u8]) -> Result {
+        if offset % 4 != 0 || data.len() % 4 != 0 {
+            return Err(EINVAL);
+        }
+
+        regs::NV_PFALCON_FALCON_EMEM_CTL::default()
+            .set_value(EMEM_CTL_WRITE | offset)
+            .write(bar, &Fsp::ID);
+
+        for chunk in data.chunks_exact(4) {
+            let word = u32::from_le_bytes([chunk[0], chunk[1], chunk[2], chunk[3]]);
+            regs::NV_PFALCON_FALCON_EMEM_DATA::default()
+                .set_data(word)
+                .write(bar, &Fsp::ID);
+        }
+
+        Ok(())
+    }
+
+    /// Reads FSP external memory at byte `offset` into `data` using Falcon PIO.
+    ///
+    /// Returns `EINVAL` if offset or data length is not 4-byte aligned.
+    #[allow(dead_code)]
+    pub(crate) fn read_emem(&self, bar: &Bar0, offset: u32, data: &mut [u8]) -> Result {
+        if offset % 4 != 0 || data.len() % 4 != 0 {
+            return Err(EINVAL);
+        }
+
+        regs::NV_PFALCON_FALCON_EMEM_CTL::default()
+            .set_value(EMEM_CTL_READ | offset)
+            .write(bar, &Fsp::ID);
+
+        for chunk in data.chunks_exact_mut(4) {
+            let word = regs::NV_PFALCON_FALCON_EMEM_DATA::read(bar, &Fsp::ID).data();
+            chunk.copy_from_slice(&word.to_le_bytes());
+        }
+
+        Ok(())
+    }
+}
diff --git a/drivers/gpu/nova-core/regs.rs b/drivers/gpu/nova-core/regs.rs
index 82cc6c0790e5..b642cee9611d 100644
--- a/drivers/gpu/nova-core/regs.rs
+++ b/drivers/gpu/nova-core/regs.rs
@@ -391,6 +391,16 @@ pub(crate) fn mem_scrubbing_done(self) -> bool {
     8:8     br_fetch as bool;
 });
 
+// GP102 EMEM PIO registers (used by FSP for Hopper/Blackwell)
+// These registers provide falcon external memory communication interface
+register!(NV_PFALCON_FALCON_EMEM_CTL @ PFalconBase[0x00000ac0] {
+    31:0    value as u32;       // EMEM control register
+});
+
+register!(NV_PFALCON_FALCON_EMEM_DATA @ PFalconBase[0x00000ac4] {
+    31:0    data as u32;        // EMEM data register
+});
+
 // The modules below provide registers that are not identical on all supported chips. They should
 // only be used in HAL modules.
 
-- 
2.52.0