From: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghuay@nvidia.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>,
Peter Newman <peternewman@google.com>,
James Morse <james.morse@arm.com>,
Babu Moger <babu.moger@amd.com>,
Drew Fustini <dfustini@baylibre.com>,
Dave Martin <Dave.Martin@arm.com>, Chen Yu <yu.c.chen@intel.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
patches@lists.linux.dev, Tony Luck <tony.luck@intel.com>
Subject: [PATCH v17 13/32] x86,fs/resctrl: Add an architectural hook called for each mount
Date: Wed, 17 Dec 2025 09:21:00 -0800 [thread overview]
Message-ID: <20251217172121.12030-14-tony.luck@intel.com> (raw)
In-Reply-To: <20251217172121.12030-1-tony.luck@intel.com>
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during
the device_initcall() phase of Linux boot. The process finishes after
the probe functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system (when
included in /etc/fstab for automatic mount by systemd).
Add a hook at the beginning of the mount code that will be used to check
for telemetry events and initialize if any are found.
Call the hook on every attempted mount. Expectations are that most actions
(like enumeration) will only need to be performed on the first call.
resctrl filesystem calls the hook with no locks held. Architecture code is
responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
---
include/linux/resctrl.h | 6 ++++++
arch/x86/kernel/cpu/resctrl/core.c | 9 +++++++++
fs/resctrl/rdtgroup.c | 2 ++
3 files changed, 17 insertions(+)
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index c43526cdf304..dc148b7feb71 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -514,6 +514,12 @@ void resctrl_offline_mon_domain(struct rdt_resource *r, struct rdt_domain_hdr *h
void resctrl_online_cpu(unsigned int cpu);
void resctrl_offline_cpu(unsigned int cpu);
+/*
+ * Architecture hook called at beginning of each file system mount attempt.
+ * No locks are held.
+ */
+void resctrl_arch_pre_mount(void);
+
/**
* resctrl_arch_rmid_read() - Read the eventid counter corresponding to rmid
* for this resource and domain.
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 9222eee7ce07..2dd48b59ba9b 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -726,6 +726,15 @@ static int resctrl_arch_offline_cpu(unsigned int cpu)
return 0;
}
+void resctrl_arch_pre_mount(void)
+{
+ static atomic_t only_once = ATOMIC_INIT(0);
+ int old = 0;
+
+ if (!atomic_try_cmpxchg(&only_once, &old, 1))
+ return;
+}
+
enum {
RDT_FLAG_CMT,
RDT_FLAG_MBM_TOTAL,
diff --git a/fs/resctrl/rdtgroup.c b/fs/resctrl/rdtgroup.c
index 771e40f02ba6..b20d104ea0c9 100644
--- a/fs/resctrl/rdtgroup.c
+++ b/fs/resctrl/rdtgroup.c
@@ -2785,6 +2785,8 @@ static int rdt_get_tree(struct fs_context *fc)
struct rdt_resource *r;
int ret;
+ resctrl_arch_pre_mount();
+
cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
/*
--
2.52.0
next prev parent reply other threads:[~2025-12-17 17:21 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-17 17:20 [PATCH v17 00/32] x86,fs/resctrl telemetry monitoring Tony Luck
2025-12-17 17:20 ` [PATCH v17 01/32] x86,fs/resctrl: Improve domain type checking Tony Luck
2025-12-17 17:20 ` [PATCH v17 02/32] x86/resctrl: Move L3 initialization into new helper function Tony Luck
2025-12-17 17:20 ` [PATCH v17 03/32] x86/resctrl: Refactor domain_remove_cpu_mon() ready for new domain types Tony Luck
2025-12-17 17:20 ` [PATCH v17 04/32] x86/resctrl: Clean up domain_remove_cpu_ctrl() Tony Luck
2025-12-17 17:20 ` [PATCH v17 05/32] x86,fs/resctrl: Refactor domain create/remove using struct rdt_domain_hdr Tony Luck
2025-12-17 17:20 ` [PATCH v17 06/32] fs/resctrl: Split L3 dependent parts out of __mon_event_count() Tony Luck
2025-12-17 17:20 ` [PATCH v17 07/32] x86,fs/resctrl: Use struct rdt_domain_hdr when reading counters Tony Luck
2025-12-17 17:20 ` [PATCH v17 08/32] x86,fs/resctrl: Rename struct rdt_mon_domain and rdt_hw_mon_domain Tony Luck
2025-12-17 17:20 ` [PATCH v17 09/32] x86,fs/resctrl: Rename some L3 specific functions Tony Luck
2025-12-17 17:20 ` [PATCH v17 10/32] fs/resctrl: Make event details accessible to functions when reading events Tony Luck
2025-12-17 17:20 ` [PATCH v17 11/32] x86,fs/resctrl: Handle events that can be read from any CPU Tony Luck
2025-12-17 17:20 ` [PATCH v17 12/32] x86,fs/resctrl: Support binary fixed point event counters Tony Luck
2025-12-17 17:21 ` Tony Luck [this message]
2026-01-05 19:17 ` [PATCH v17 13/32] x86,fs/resctrl: Add an architectural hook called for each mount Borislav Petkov
2026-01-05 19:39 ` Luck, Tony
2026-01-05 20:04 ` Borislav Petkov
2026-01-05 20:15 ` Luck, Tony
2026-01-07 17:29 ` Reinette Chatre
2026-01-07 18:05 ` Luck, Tony
2026-01-07 19:33 ` Reinette Chatre
2026-01-07 20:25 ` Luck, Tony
2026-01-07 22:09 ` Reinette Chatre
2026-01-07 22:27 ` Luck, Tony
2026-01-07 23:09 ` Reinette Chatre
2026-01-08 0:16 ` Luck, Tony
2026-01-08 2:42 ` Reinette Chatre
2025-12-17 17:21 ` [PATCH v17 14/32] x86,fs/resctrl: Add and initialize a resource for package scope monitoring Tony Luck
2025-12-17 17:21 ` [PATCH v17 15/32] fs/resctrl: Emphasize that L3 monitoring resource is required for summing domains Tony Luck
2025-12-17 17:21 ` [PATCH v17 16/32] x86/resctrl: Discover hardware telemetry events Tony Luck
2025-12-17 17:21 ` [PATCH v17 17/32] x86,fs/resctrl: Fill in details of events for guid 0x26696143 and 0x26557651 Tony Luck
2025-12-17 17:21 ` [PATCH v17 18/32] x86,fs/resctrl: Add architectural event pointer Tony Luck
2025-12-17 17:21 ` [PATCH v17 19/32] x86/resctrl: Find and enable usable telemetry events Tony Luck
2026-01-09 12:16 ` Borislav Petkov
2026-01-09 16:17 ` Reinette Chatre
2026-01-09 16:53 ` Luck, Tony
2026-01-09 22:01 ` Borislav Petkov
2025-12-17 17:21 ` [PATCH v17 20/32] x86/resctrl: Read " Tony Luck
2025-12-17 17:21 ` [PATCH v17 21/32] fs/resctrl: Refactor mkdir_mondata_subdir() Tony Luck
2025-12-17 17:21 ` [PATCH v17 22/32] fs/resctrl: Refactor rmdir_mondata_subdir_allrdtgrp() Tony Luck
2025-12-17 17:21 ` [PATCH v17 23/32] x86,fs/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG Tony Luck
2025-12-17 17:21 ` [PATCH v17 24/32] x86/resctrl: Add energy/perf choices to rdt boot option Tony Luck
2026-01-09 22:16 ` Borislav Petkov
2026-01-09 22:20 ` Luck, Tony
2025-12-17 17:21 ` [PATCH v17 25/32] x86/resctrl: Handle number of RMIDs supported by RDT_RESOURCE_PERF_PKG Tony Luck
2025-12-17 17:21 ` [PATCH v17 26/32] fs/resctrl: Move allocation/free of closid_num_dirty_rmid[] Tony Luck
2025-12-17 17:21 ` [PATCH v17 27/32] x86,fs/resctrl: Compute number of RMIDs as minimum across resources Tony Luck
2025-12-17 17:21 ` [PATCH v17 28/32] fs/resctrl: Move RMID initialization to first mount Tony Luck
2025-12-17 17:21 ` [PATCH v17 29/32] x86/resctrl: Enable RDT_RESOURCE_PERF_PKG Tony Luck
2025-12-17 17:21 ` [PATCH v17 30/32] fs/resctrl: Provide interface to create architecture specific debugfs area Tony Luck
2026-01-10 10:57 ` Borislav Petkov
2026-01-10 19:13 ` Luck, Tony
2026-01-10 19:42 ` Borislav Petkov
2026-01-10 23:29 ` Luck, Tony
2025-12-17 17:21 ` [PATCH v17 31/32] x86/resctrl: Add debugfs files to show telemetry aggregator status Tony Luck
2025-12-17 17:21 ` [PATCH v17 32/32] x86,fs/resctrl: Update documentation for telemetry events Tony Luck
2025-12-17 22:16 ` [PATCH v17 00/32] x86,fs/resctrl telemetry monitoring Reinette Chatre
2026-01-04 6:14 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251217172121.12030-14-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=Dave.Martin@arm.com \
--cc=babu.moger@amd.com \
--cc=dfustini@baylibre.com \
--cc=fenghuay@nvidia.com \
--cc=james.morse@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=reinette.chatre@intel.com \
--cc=x86@kernel.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox