From: Jim Cromie <jim.cromie@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org, jbaron@akamai.com,
louis.chauvet@bootlin.com, Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH v13 05/36] dyndbg: factor ddebug_match_desc out from ddebug_change
Date: Wed, 8 Apr 2026 14:01:40 -0600 [thread overview]
Message-ID: <20260408200211.43821-6-jim.cromie@gmail.com> (raw)
In-Reply-To: <20260408200211.43821-1-jim.cromie@gmail.com>
ddebug_change() is a big (~100 lines) function with a nested for loop.
The outer loop walks the per-module ddebug_tables list, and does
module stuff: it filters on a query's "module FOO*" and "class BAR",
failures here skip the entire inner loop.
The inner loop (60 lines) scans a module's descriptors. It starts
with a long block of filters on function, line, format, and the
validated "BAR" class (or the legacy/_DPRINTK_CLASS_DFLT).
These filters "continue" past pr_debugs that don't match the query
criteria, before it falls through the code below that counts matches,
then adjusts the flags and static-keys. This is unnecessarily hard to
think about.
So move the per-descriptor filter-block into a boolean function:
ddebug_match_desc(desc), and change each "continue" to "return false".
This puts a clear interface in place, so any future changes are either
inside, outside, or across this interface.
also fix checkpatch complaints about spaces and braces.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 83 +++++++++++++++++++++++++--------------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 18a71a9108d3..6b1e983cfedc 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -172,6 +172,52 @@ static struct ddebug_class_map *ddebug_find_valid_class(struct ddebug_table cons
* callsites, normally the same as number of changes. If verbose,
* logs the changes. Takes ddebug_lock.
*/
+static bool ddebug_match_desc(const struct ddebug_query *query,
+ struct _ddebug *dp,
+ int valid_class)
+{
+ /* match site against query-class */
+ if (dp->class_id != valid_class)
+ return false;
+
+ /* match against the source filename */
+ if (query->filename &&
+ !match_wildcard(query->filename, dp->filename) &&
+ !match_wildcard(query->filename,
+ kbasename(dp->filename)) &&
+ !match_wildcard(query->filename,
+ trim_prefix(dp->filename)))
+ return false;
+
+ /* match against the function */
+ if (query->function &&
+ !match_wildcard(query->function, dp->function))
+ return false;
+
+ /* match against the format */
+ if (query->format) {
+ if (*query->format == '^') {
+ char *p;
+ /* anchored search. match must be at beginning */
+ p = strstr(dp->format, query->format + 1);
+ if (p != dp->format)
+ return false;
+ } else if (!strstr(dp->format, query->format)) {
+ return false;
+ }
+ }
+
+ /* match against the line number range */
+ if (query->first_lineno &&
+ dp->lineno < query->first_lineno)
+ return false;
+ if (query->last_lineno &&
+ dp->lineno > query->last_lineno)
+ return false;
+
+ return true;
+}
+
static int ddebug_change(const struct ddebug_query *query,
struct flag_settings *modifiers)
{
@@ -204,42 +250,7 @@ static int ddebug_change(const struct ddebug_query *query,
for (i = 0; i < dt->num_ddebugs; i++) {
struct _ddebug *dp = &dt->ddebugs[i];
- /* match site against query-class */
- if (dp->class_id != valid_class)
- continue;
-
- /* match against the source filename */
- if (query->filename &&
- !match_wildcard(query->filename, dp->filename) &&
- !match_wildcard(query->filename,
- kbasename(dp->filename)) &&
- !match_wildcard(query->filename,
- trim_prefix(dp->filename)))
- continue;
-
- /* match against the function */
- if (query->function &&
- !match_wildcard(query->function, dp->function))
- continue;
-
- /* match against the format */
- if (query->format) {
- if (*query->format == '^') {
- char *p;
- /* anchored search. match must be at beginning */
- p = strstr(dp->format, query->format+1);
- if (p != dp->format)
- continue;
- } else if (!strstr(dp->format, query->format))
- continue;
- }
-
- /* match against the line number range */
- if (query->first_lineno &&
- dp->lineno < query->first_lineno)
- continue;
- if (query->last_lineno &&
- dp->lineno > query->last_lineno)
+ if (!ddebug_match_desc(query, dp, valid_class))
continue;
nfound++;
--
2.53.0
next prev parent reply other threads:[~2026-04-08 20:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-08 20:01 [PATCH v13 00/36] fix dynamic-debug classmaps regression for DRM Jim Cromie
2026-04-08 20:01 ` [PATCH v13 01/36] dyndbg: fix NULL ptr on i386 due to section mis-alignment Jim Cromie
2026-04-08 20:01 ` [PATCH v13 02/36] vmlinux.lds.h: move BOUNDED_SECTION_* macros to reuse later Jim Cromie
2026-04-08 20:01 ` [PATCH v13 03/36] dyndbg.lds.S: fix lost dyndbg sections in modules Jim Cromie
2026-04-08 20:01 ` [PATCH v13 04/36] vmlinux.lds.h: drop unused HEADERED_SECTION* macros Jim Cromie
2026-04-08 20:01 ` Jim Cromie [this message]
2026-04-08 20:01 ` [PATCH v13 06/36] dyndbg: add stub macro for DECLARE_DYNDBG_CLASSMAP Jim Cromie
2026-04-08 20:01 ` [PATCH v13 07/36] docs/dyndbg: update examples \012 to \n Jim Cromie
2026-04-08 20:01 ` [PATCH v13 08/36] docs/dyndbg: explain flags parse 1st Jim Cromie
2026-04-08 20:01 ` [PATCH v13 09/36] test-dyndbg: fixup CLASSMAP usage error Jim Cromie
2026-04-08 20:01 ` [PATCH v13 10/36] dyndbg: reword "class unknown," to "class:_UNKNOWN_" Jim Cromie
2026-04-08 20:01 ` [PATCH v13 11/36] dyndbg: make ddebug_class_param union members same size Jim Cromie
2026-04-08 20:01 ` [PATCH v13 12/36] dyndbg: drop NUM_TYPE_ARRAY Jim Cromie
2026-04-08 20:01 ` [PATCH v13 13/36] dyndbg: tweak pr_fmt to avoid expansion conflicts Jim Cromie
2026-04-08 20:01 ` [PATCH v13 14/36] dyndbg: reduce verbose/debug clutter Jim Cromie
2026-04-08 20:01 ` [PATCH v13 15/36] dyndbg: refactor param_set_dyndbg_classes and below Jim Cromie
2026-04-08 20:01 ` [PATCH v13 16/36] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap Jim Cromie
2026-04-08 20:01 ` [PATCH v13 17/36] dyndbg: replace classmap list with a vector Jim Cromie
2026-04-08 20:01 ` [PATCH v13 18/36] dyndbg: macrofy a 2-index for-loop pattern Jim Cromie
2026-04-08 20:01 ` [PATCH v13 19/36] dyndbg,module: make proper substructs in _ddebug_info Jim Cromie
2026-04-08 20:01 ` [PATCH v13 20/36] dyndbg: move mod_name down from struct ddebug_table to _ddebug_info Jim Cromie
2026-04-08 20:01 ` [PATCH v13 21/36] dyndbg: hoist classmap-filter-by-modname up to ddebug_add_module Jim Cromie
2026-04-08 20:01 ` [PATCH v13 22/36] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code Jim Cromie
2026-04-08 20:01 ` [PATCH v13 23/36] selftests-dyndbg: add a dynamic_debug run_tests target Jim Cromie
2026-04-08 20:01 ` [PATCH v13 24/36] dyndbg: change __dynamic_func_call_cls* macros into expressions Jim Cromie
2026-04-08 20:02 ` [PATCH v13 25/36] dyndbg-API: replace DECLARE_DYNDBG_CLASSMAP Jim Cromie
2026-04-08 20:02 ` [PATCH v13 26/36] dyndbg: detect class_id reservation conflicts Jim Cromie
2026-04-08 20:02 ` [PATCH v13 27/36] dyndbg: check DYNAMIC_DEBUG_CLASSMAP_{DEFINE,USE_} args at compile-time Jim Cromie
2026-04-08 20:02 ` [PATCH v13 28/36] dyndbg-test: change do_prints testpoint to accept a loopct Jim Cromie
2026-04-08 20:02 ` [PATCH v13 29/36] dyndbg-API: promote DYNAMIC_DEBUG_CLASSMAP_PARAM to API Jim Cromie
2026-04-08 20:02 ` [PATCH v13 30/36] dyndbg: treat comma as a token separator Jim Cromie
2026-04-08 20:02 ` [PATCH v13 31/36] dyndbg: split multi-query strings with % Jim Cromie
2026-04-08 20:02 ` [PATCH v13 32/36] selftests-dyndbg: add test_mod_submod Jim Cromie
2026-04-08 20:02 ` [PATCH v13 33/36] dyndbg: resolve "protection" of class'd pr_debug Jim Cromie
2026-04-08 20:02 ` [PATCH v13 34/36] dyndbg: harden classmap and descriptor validation Jim Cromie
2026-04-08 20:02 ` [PATCH v13 35/36] docs/dyndbg: add classmap info to howto Jim Cromie
2026-04-08 20:02 ` [PATCH v13 36/36] dyndbg: Ignore additional arguments from pr_fmt Jim Cromie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260408200211.43821-6-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jbaron@akamai.com \
--cc=linux-kernel@vger.kernel.org \
--cc=louis.chauvet@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox